- 22 Mar, 2019 17 commits
-
-
Eli Britstein authored
Changing the VLAN header may be implemented by pop the existing header and push a new one. Translate those operations as VLAN modify. Applicable for use cases such as OVS where the controller translates a vlan modify meta (OF) rule to DP pop+push actions rule. Signed-off-by:
Eli Britstein <elibr@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Eli Britstein authored
Support VLAN modify action by emulating a rewrite action for the VLAN fields. Currently, the only supported field is the vid. The prio in the action must be set to 0 to indicate no change. Signed-off-by:
-
Eli Britstein authored
Add VLAN ID rewrite fields as a pre-step to support this rewrite. Signed-off-by:
-
Moshe Shemesh authored
Added IANA_VXLAN_UDP_PORT (4789) definition to vxlan header file so it can be used by drivers instead of local definition. Updated drivers which locally defined it as 4789 to use it. Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Cc: John Hurley <john.hurley@netronome.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Yunsheng Lin <linyunsheng@huawei.com> Cc: Peng Li <lipeng321@huawei.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Moshe Shemesh authored
Currently support only default geneve udp port (6081). For the tx side, the HW is assisted by SW parsing, which sets the headers offset to offload tunneled LSO and csum. Note that for udp tunnels, we don't use special rx offloads, as rss on the outer headers is enough, we support checksum complete and GRO takes care of aggregation. Geneve TSO BW and CPU load results (tested using iperf single tcp stream). In this patch we add TSO support over Geneve, so the "before" result doesn't actually get to using the TSO HW offload even when turned on. Tested on ConnectX-5, Intel(R) Xeon(R) CPU E5-2660 v2 @2.20GHz. __________________________________ | Before | After | |________________|_________________| | 12.6 Gbits/sec | 21.7 Gbits/sec | | 100% CPU load | 61.5% CPU load | |________________|_________________| Signed-off-by:
-
Moshe Shemesh authored
Refactor mlx5e_ipsec_set_swp() code, split the part which sets the eseg software parser (SWP) offsets and flags, so it can be used in a downstream patch by other mlx5e functionality which needs to set eseg SWP. The new function mlx5e_set_eseg_swp() is useful for setting swp for both outer and inner headers. It also handles the special ipsec case of xfrm mode transfer. Signed-off-by:
-
Moshe Shemesh authored
Move the definition of the default Geneve udp port from the geneve source to the header file, so we can re-use it from drivers. Modify existing drivers to use it. Signed-off-by:
-
Gustavo A. R. Silva authored
Remove redundant assignment to tun_entropy->enabled. Addesses-Coverity-ID: 1477328 ("Unused value") Fixes: 97417f61 ("net/mlx5e: Fix GRE key by controlling port tunnel entropy calculation") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Acked-by:
-
Saeed Mahameed authored
Amazingly a mlx5e_tc function is being called from the eswitch layer, which is by itself very terrible! The function was declared locally in eswitch_offloads.c so it could be used there, which caused the following compilation warning, fix that. drivers/.../mlx5/core/en_tc.c:3242:6: [-Werror=missing-prototypes] error: no previous prototype for ‘mlx5e_tc_clean_fdb_peer_flows’ Fixes: 04de7dda ("net/mlx5e: Infrastructure for duplicated offloading of TC flows") Reviewed-by:
-
Saeed Mahameed authored
This patch fixes compiler warnings: In drivers/.../mlx5/core/en/port_buffer.c:190: warning: Function parameter or member 'pfc_en' not described... ... warning: Function parameter or member 'change' not described... Fixes: 0696d608 ("net/mlx5e: Receive buffer configuration") Reviewed-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
mlx5_eq_table_get_rmap is being used only when CONFIG_RFS_ACCEL is enabled, this patch fixes the below warning when CONFIG_RFS_ACCEL is disabled. drivers/.../mlx5/core/eq.c:903:18: [-Werror=missing-prototypes] error: no previous prototype for ‘mlx5_eq_table_get_rmap’ Fixes: f2f3df55 ("net/mlx5: EQ, Privatize eq_table and friends") Signed-off-by:
-
Parav Pandit authored
It is desired to get rid of num_vfs stored inside mlx5_core_sriov to safely support vports more than vfs. To reduce dependency on mlx5_core_sriov num_vfs, start using pci_num_vf() from pci core. Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Bodong Wang <bodong@mellanox.com> Signed-off-by:
-
Parav Pandit authored
Macro MLX5_TOTAL_VPORTS() returns total number of vports. Therefore, rename variable total_vfs to total_vports to improve code readability. Signed-off-by:
-
Parav Pandit authored
Simplify sriov enable/disable flow for below two checks. 1. PCI core driver allows sriov configuration only on a PF. This is done in drivers/pci/pci-sysfs.c sriov_attrs_are_visible(). 2. PCI core driver allow sriov enablement if the sriov is currently disabled for for a PF. This is done in drivers/pci/pci-sysfs.c sriov_numvfs_store(). Hence there is no need for mlx5 driver to duplicate such checks. Signed-off-by:
-
Johannes Berg authored
Since maxattr is common, the policy can't really differ sanely, so make it common as well. The only user that did in fact manage to make a non-common policy is taskstats, which has to be really careful about it (since it's still using a common maxattr!). This is no longer supported, but we can fake it using pre_doit. This reduces the size of e.g. nl80211.o (which has lots of commands): text data bss dec hex filename 398745 14323 2240 415308 6564c net/wireless/nl80211.o (before) 397913 14331 2240 414484 65314 net/wireless/nl80211.o (after) -------------------------------- -832 +8 0 -824 Which is obviously just 8 bytes for each command, and an added 8 bytes for the new policy pointer. I'm not sure why the ops list is counted as .text though. Most of the code transformations were done using the following spatch: @ops@ identifier OPS; expression POLICY; @@ struct genl_ops OPS[] = { ..., { - .policy = POLICY, }, ... }; @@ identifier ops.OPS; expression ops.POLICY; identifier fam; expression M; @@ struct genl_family fam = { .ops = OPS, .maxattr = M, + .policy = POLICY, ... }; This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing the cb->data as ops, which we want to change in a later genl patch. Signed-off-by:Johannes Berg <johannes.berg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Replace the call to netif_wake_queue in rtl8169_start_xmit with netif_start_queue as we don't need to actually wake up the queue since we are still in mid transmit so we just need to reset the bit so it doesn't prevent the next transmit. (Description shamelessly copied from a mail sent by Alex.) Suggested-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
Aquantia PHY's of the AQR107 family support the downshift feature. Add support for it as standard PHY tunable so that it can be controlled via ethtool. The AQCS109 supports a proprietary 2-pair 1Gbps mode. If two such PHY's are connected to each other with a 2-pair cable, they may not be able to establish a link if both advertise modes > 1Gbps. v2: - add downshift event detection - warn if downshift occurred - read downshifted rate from vendor register - enable downshift per default on all AQR107 family members Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 21 Mar, 2019 23 commits
-
-
David S. Miller authored
Vlad Buslov says: ==================== Refactor flower classifier to remove dependency on rtnl lock Currently, all netlink protocol handlers for updating rules, actions and qdiscs are protected with single global rtnl lock which removes any possibility for parallelism. This patch set is a third step to remove rtnl lock dependency from TC rules update path. Recently, new rtnl registration flag RTNL_FLAG_DOIT_UNLOCKED was added. TC rule update handlers (RTM_NEWTFILTER, RTM_DELTFILTER, etc.) are already registered with this flag and only take rtnl lock when qdisc or classifier requires it. Classifiers can indicate that their ops callbacks don't require caller to hold rtnl lock by setting the TCF_PROTO_OPS_DOIT_UNLOCKED flag. The goal of this change is to refactor flower classifier to support unlocked execution and register it with unlocked flag. This patch set implements following changes to make flower classifier concurrency-safe: - Implement reference counting for individual filters. Change fl_get to take reference to filter. Implement tp->ops->put callback that was introduced in cls API patch set to release reference to flower filter. - Use tp->lock spinlock to protect internal classifier data structures from concurrent modification. - Handle concurrent tcf proto deletion by returning EAGAIN, which will cause cls API to retry and create new proto instance or return error to the user (depending on message type). - Handle concurrent insertion of filter with same priority and handle by returning EAGAIN, which will cause cls API to lookup filter again and process it accordingly to netlink message flags. - Extend flower mask with reference counting and protect masks list with masks_lock spinlock. - Prevent concurrent mask insertion by inserting temporary value to masks hash table. This is necessary because mask initialization is a sleeping operation and cannot be done while holding tp->lock. Both chain level and classifier level conflicts are resolved by returning -EAGAIN to cls API that results restart of whole operation. This retry mechanism is a result of fine-grained locking approach used in this and previous changes in series and is necessary to allow concurrent updates on same chain instance. Alternative approach would be to lock the whole chain while updating filters on any of child tp's, adding and removing classifier instances from the chain. However, since most CPU-intensive parts of filter update code are specifically in classifier code and its dependencies (extensions and hw offloads), such approach would negate most of the gains introduced by this change and previous changes in the series when updating same chain instance. Tcf hw offloads API is not changed by this patch set and still requires caller to hold rtnl lock. Refactored flower classifier tracks rtnl lock state by means of 'rtnl_held' flag provided by cls API and obtains the lock before calling hw offloads. Following patch set will lift this restriction and refactor cls hw offloads API to support unlocked execution. With these changes flower classifier is safely registered with TCF_PROTO_OPS_DOIT_UNLOCKED flag in last patch. Changes from V2 to V3: - Rebase on latest net-next Changes from V1 to V2: - Extend cover letter with explanation about retry mechanism. - Rebase on current net-next. - Patch 1: - Use rcu_dereference_raw() for tp->root dereference. - Update comment in fl_head_dereference(). - Patch 2: - Remove redundant check in fl_change error handling code. - Add empty line between error check and new handle assignment. - Patch 3: - Refactor loop in fl_get_next_filter() to improve readability. - Patch 4: - Refactor __fl_delete() to improve readability. - Patch 6: - Fix comment in fl_check_assign_mask(). - Patch 9: - Extend commit message. - Fix error code in comment. - Patch 11: - Fix fl_hw_replace_filter() to always release rtnl lock in error handlers. - Patch 12: - Don't take rtnl lock before calling __fl_destroy_filter() in workqueue context. - Extend commit message with explanation why flower still takes rtnl lock before calling hardware offloads API. Github: <https://github.com/vbuslov/linux/tree/unlocked-flower-cong3> ==================== Signed-off-by: -
Vlad Buslov authored
Set TCF_PROTO_OPS_DOIT_UNLOCKED for flower classifier to indicate that its ops callbacks don't require caller to hold rtnl lock. Don't take rtnl lock in fl_destroy_filter_work() that is executed on workqueue instead of being called by cls API and is not affected by setting TCF_PROTO_OPS_DOIT_UNLOCKED. Rtnl mutex is still manually taken by flower classifier before calling hardware offloads API that has not been updated for unlocked execution. Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Vlad Buslov authored
Use 'rtnl_held' flag to track if caller holds rtnl lock. Propagate the flag to internal functions that need to know rtnl lock state. Take rtnl lock before calling tcf APIs that require it (hw offload, bind filter, etc.). Signed-off-by:
-
Vlad Buslov authored
struct tcf_proto was extended with spinlock to be used by classifiers instead of global rtnl lock. Use it to protect shared flower classifier data structures (handle_idr, mask hashtable and list) and fields of individual filters that can be accessed concurrently. This patch set uses tcf_proto->lock as per instance lock that protects all filters on tcf_proto. Signed-off-by:
-
Vlad Buslov authored
Without rtnl lock protection tcf proto can be deleted concurrently. Check tcf proto 'deleting' flag after taking tcf spinlock to verify that no concurrent deletion is in progress. Return EAGAIN error if concurrent deletion detected, which will cause caller to retry and possibly create new instance of tcf proto. Retry mechanism is a result of fine-grained locking approach used in this and previous changes in series and is necessary to allow concurrent updates on same chain instance. Alternative approach would be to lock the whole chain while updating filters on any of child tp's, adding and removing classifier instances from the chain. However, since most CPU-intensive parts of filter update code are specifically in classifier code and its dependencies (extensions and hw offloads), such approach would negate most of the gains introduced by this change and previous changes in the series when updating same chain instance. Signed-off-by:
-
Vlad Buslov authored
Check if user specified a handle and another filter with the same handle was inserted concurrently. Return EAGAIN to retry filter processing (in case it is an overwrite request). Signed-off-by:
-
Vlad Buslov authored
Protect modifications of flower masks list with spinlock to remove dependency on rtnl lock and allow concurrent access. Signed-off-by:
-
Vlad Buslov authored
Without rtnl lock protection masks with same key can be inserted concurrently. Insert temporary mask with reference count zero to masks hashtable. This will cause any concurrent modifications to retry. Wait for rcu grace period to complete after removing temporary mask from masks hashtable to accommodate concurrent readers. Signed-off-by:
-
Vlad Buslov authored
Extend fl_flow_mask structure with reference counter to allow parallel modification without relying on rtnl lock. Use rcu read lock to safely lookup mask and increment reference counter in order to accommodate concurrent deletes. Signed-off-by:
-
Vlad Buslov authored
In order to prevent double deletion of filter by concurrent tasks when rtnl lock is not used for synchronization, add 'deleted' filter field. Check value of this field when modifying filters and return error if concurrent deletion is detected. Refactor __fl_delete() to accept pointer to 'last' boolean as argument, and return error code as function return value instead. This is necessary to signal concurrent filter delete to caller. Signed-off-by:
-
Vlad Buslov authored
Extend flower filters with reference counting in order to remove dependency on rtnl lock in flower ops and allow to modify filters concurrently. Reference to flower filter can be taken/released concurrently as soon as it is marked as 'unlocked' by last patch in this series. Use atomic reference counter type to make concurrent modifications safe. Always take reference to flower filter while working with it: - Modify fl_get() to take reference to filter. - Implement tp->put() callback as fl_put() function to allow cls API to release reference taken by fl_get(). - Modify fl_change() to assume that caller holds reference to fold and take reference to fnew. - Take reference to filter while using it in fl_walk(). Implement helper functions to get/put filter reference counter. Signed-off-by:
-
Vlad Buslov authored
As a preparation for using classifier spinlock instead of relying on external rtnl lock, rearrange code in fl_change. The goal is to group the code which changes classifier state in single block in order to allow following commits in this set to protect it from parallel modification with tp->lock. Data structures that require tp->lock protection are mask hashtable and filters list, and classifier handle_idr. fl_hw_replace_filter() is a sleeping function and cannot be called while holding a spinlock. In order to execute all sequence of changes to shared classifier data structures atomically, call fl_hw_replace_filter() before modifying them. Signed-off-by:
-
Vlad Buslov authored
Flower classifier only changes root pointer during init and destroy. Cls API implements reference counting for tcf_proto, so there is no danger of concurrent access to tp when it is being destroyed, even without protection provided by rtnl lock. Implement new function fl_head_dereference() to dereference tp->root without checking for rtnl lock. Use it in all flower function that obtain head pointer instead of rtnl_dereference(). Signed-off-by:
-
Jakub Kicinski authored
NFP driver ABI contains bits for L2 switching which were never implemented in initially envisioned form. Remove the defines, and open up the possibility of reclaiming the bits for other uses. Signed-off-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
-
David S. Miller authored
NeilBrown says: ==================== Two clean-ups for rhashtable. These two patches make small improvements to rhashtable, but are otherwise unrelated. Thanks to Herbert, Miguel, and Paul for the review. ==================== Signed-off-by: -
NeilBrown authored
The pattern set by list.h is that for_each..continue() iterators start at the next entry after the given one, while for_each..from() iterators start at the given entry. The rht_for_each*continue() iterators are documented as though the start at the 'next' entry, but actually start at the given entry, and they are used expecting that behaviour. So fix the documentation and change the names to *from for consistency with list.h Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
NeilBrown authored
rhashtable_try_insert() currently holds a lock on the bucket in the first table, while also locking buckets in subsequent tables. This is unnecessary and looks like a hold-over from some earlier version of the implementation. As insert and remove always lock a bucket in each table in turn, and as insert only inserts in the final table, there cannot be any races that are not covered by simply locking a bucket in each table in turn. When an insert call reaches that last table it can be sure that there is no matchinf entry in any other table as it has searched them all, and insertion never happens anywhere but in the last table. The fact that code tests for the existence of future_tbl while holding a lock on the relevant bucket ensures that two threads inserting the same key will make compatible decisions about which is the "last" table. This simplifies the code and allows the ->rehash field to be discarded. We still need a way to ensure that a dead bucket_table is never re-linked by rhashtable_walk_stop(). This can be achieved by calling call_rcu() inside the locked region, and checking with rcu_head_after_call_rcu() in rhashtable_walk_stop() to see if the bucket table is empty and dead. Acked-by:
Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: phy: Move Omega PHY entry to Cygnus PHY driver In order to pave the way for adding some specific Omega PHY features that may not be desirable on other products covered by the bcm7xxx PHY driver, split the Omega PHY entry into the Cygnus PHY driver such that the PHY drivers are reflective of product lines/business units maintaining them within Broadcom. No functional changes intended. ==================== Acked-by:
Arun Parameswaran <arun.parameswaran@broadcom.com> Signed-off-by:
-
Florian Fainelli authored
Cygnus and Omega are part of the same business unit and product line, it makes sense to group PHY entries by products such that a platform can select only the drivers that it needs. Bring all the functionality that the BCM7XXX_28NM_GPHY() macro hides for us and remove the Omega PHY entry from bcm7xxx.c. As an added bonus, we now have a proper mdio_device_id entry to permit auto-loading. Signed-off-by:
Scott Branden <scott.branden@broadcom.com> Signed-off-by:
-
Florian Fainelli authored
The Omega PHY entry was added to bcm7xxx.c out of convenience and this breaks the one driver per product line paradigm that was applied up until now. Since the AFE initialization is shared between Omega and BCM7xxx move the relevant functions to bcm-phy-lib.[ch]. No functional changes introduced. Signed-off-by:
-
Julian Wiedmann authored
Get rid of some obsolete gc-related documentation and macros that were missed in commit 5b7c9a8f ("net: remove dst gc related code"). CC: Wei Wang <weiwan@google.com> Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Acked-by:
Wei Wang <weiwan@google.com> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: broadcom: Remove print of base address Some broadcom MDIO/switch/Ethernet MAC drivers insist on printing the base register virtual address which has little value. ==================== Signed-off-by: -
Florian Fainelli authored
Since commit ad67b74d ("printk: hash addresses printed with %p") pointers are being hashed when printed. Displaying the virtual memory at bootup time is not helpful, especially given we use a dev_info() which already displays the platform device's address. Signed-off-by:
-
