- 25 Jun, 2006 19 commits
-
-
Trent Piepho authored
Changeset 395c7c4d8f0c changed several dprintks from level 1 to level 0 (always on). They generate four lines every time DMA starts, which don't containing any information with a use outside of debugging. This turns them back to level 1. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Andrew de Quincey authored
If you have more than DVB_MAX_ADAPTERS in your machine, this causes an oops. Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
-
Trent Piepho authored
Adds the FE_GET_FRONTEND ioctl to the or51132 frontend. Current modulation is read from the hardware, while frequency is taken from the driver's state. Signed-off-by:
-
Michael Krufky authored
- new cards should always be added to the end of the list. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Rusty Scott authored
Added card definitions for the pcHDTV HD5500 ATSC/QAM card Signed-off-by:
Rusty Scott <rustys@ieee.org> Signed-off-by:
-
Andreas Oberritter authored
The ioctl DMX_GET_EVENT has never been implemented. I guess no software is using it because of its lack of implementation. Future software won't use it, too, because this API doesn't make much sense the way it is: Frontend events have their own different API. Scrambling events can't be generated in a useful way by the hardware I know of. Signed-off-by:
Andreas Oberritter <obi@linuxtv.org> Signed-off-by:
-
Trent Piepho authored
A few lines that do nothing in the or51132 frontend, removed. Signed-off-by:
-
Trent Piepho authored
As QAM_64, QAM_256, and QAM_AUTO all use the same firmware, switching between these modulations doesn't require a firmware re-load. This also fixes a mishandled error condition, in which the firmware file is loaded into the kernel, the clock mode is changed, but then the firmware upload to the device fails. The modulation change is aborted, but the clock mode would still be changed. Signed-off-by:
-
Trent Piepho authored
It's "Terrestrial" Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Hans Verkuil authored
- Use new routing input defines in em28xx-cards.c - Fix S-Video settings for tvp5150-based cards (input was copied from saa7115 based cards and worked only because S-Video was selected in the default: case) - Replace VIDIOC_S_INPUT by VIDIOC_INT_S_VIDEO_ROUTING in em28xx-video.c - Remove the now obsolete VIDIOC_S_INPUT handler in saa7115.c - Add VIDIOC_INT_G/S_VIDEO_ROUTING in tvp5150.c - Add new media/tvp5150.h with the routing defines. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Some saa7115-based cards use a different crystal frequency and a different audio clock generation. Add a new VIDIOC_INT_S_CRYSTAL_FREQ command to be able to set these values. Also change the default APLL setting to 0. It makes no sense to have the audio clock independent from the video clock, this can lead to audio/video synchronization problems. Setting this to 0 is also consistent with the old saa7114.c source and the way the Hauppauge Windows driver sets it. Signed-off-by:
-
Hans Verkuil authored
- improve handling of the EXTERN input: don't start an unnecessary carrier scan - improve the LOG_STATUS output - ensure that a carrier scan is started again when switching back to the tuner. - set correct prescale for L-NICAM Signed-off-by:
-
Trent Piepho authored
There is some old code in the or51133 firmware loading function that has no effect. Left a comment to in case it helps someone trying to reverse engineer the chip. Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: (25 commits) [ARM] 3648/1: Update struct ucontext layout for coprocessor registers [ARM] Add identifying number for non-rt sigframe [ARM] Gather common sigframe saving code into setup_sigframe() [ARM] Gather common sigframe restoration code into restore_sigframe() [ARM] Re-use sigframe within rt_sigframe [ARM] Merge sigcontext and sigmask members of sigframe [ARM] Replace extramask with a full copy of the sigmask [ARM] Remove rt_sigframe puc and pinfo pointers [ARM] 3647/1: S3C24XX: add Osiris to the list of simtec pm machines [ARM] 3645/1: S3C2412: irq support for external interrupts [ARM] 3643/1: S3C2410: Add new usb clocks [ARM] 3642/1: S3C24XX: Add machine SMDK2413 [ARM] 3641/1: S3C2412: Fixup gpio register naming [ARM] 3640/1: S3C2412: Use S3C24XX_DCLKCON instead of S3C2410_DCLKCON [ARM] 3639/1: S3C2412: serial port support [ARM] 3638/1: S3C2412: core clocks [ARM] 3637/1: S3C24XX: Add mpll clock, and set as fclk parent [ARM] 3636/1: S3C2412: Add selection of CPU_ARM926 [ARM] 3635/1: S3C24XX: Add S3C2412 core cpu support [ARM] 3633/1: S3C24XX: s3c2410 gpio bugfix - wrong pin nos ...
-
Linus Torvalds authored
This reverts commit 786dc1d3. As Al so eloquently points out, the patch is crap. The old code was fine, the new code was bogus. It never dereferenced a user pointer, the "->" operator was to an array member, which gives the _address_ of the member (in user space), not an actual dereference at all. Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
- 24 Jun, 2006 21 commits
-
-
Russell King authored
-
Daniel Jacobowitz authored
Patch from Daniel Jacobowitz In order for userspace to find saved coprocessor registers, move them from struct rt_sigframe into struct ucontext. Also allow space for glibc's sigset_t, so that userspace and kernelspace can use the same ucontext layout. Define the magic numbers for iWMMXt in the header file for easier reference. Include the size of the coprocessor data in the magic numbers. Also define magic numbers and layout for VFP, not yet saved. Signed-off-by:
Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: radeon constify radeon microcode Add i915 ioctls to configure pipes for vblank interrupt. drm: update radeon to 1.25 add r200 vertex program support drm: radeon add a tcl state flush before accessing tcl vector space
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelfb-2.6Linus Torvalds authored
* 'intelfb-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelfb-2.6: intelfb delousing
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (40 commits) [SPARC64]: Update defconfig. [SPARC64]: Make auxio a real driver. [PARPORT] sunbpp: Convert to new SBUS device framework. [Documentation]: Update probing info in sbus_drivers.txt [SCSI] qlogicpti: Convert to new SBUS device framework. [SCSI] esp: Fix bug in esp_remove_common. [NET] sunhme: Kill useless loop over sdevs in quattro_sbus_find(). [NET] myri_sbus: Kill unused next_module struct member. [NET] myri_sbus: Convert to new SBUS device layer. [NET] sunqe: Convert to new SBUS driver layer. [NET] sunbmac: Convert over to new SBUS device framework. [NET] sunlance: Convert to new SBUS driver framework. [NET] sunhme: Convert to new SBUS driver framework. [NET] sunhme: Kill __sparc__ and __sparc_v9__ ifdefs. [SCSI] sparc: Port esp to new SBUS driver layer. [SOUND] sparc: Port amd7930 to new SBUS device layer. [SBUS]: Rewrite and plug into of_device framework. [SPARC]: Port of_device layer and make ebus use it. [SPARC]: Port sparc64 in-kernel device tree code to sparc32. [SPARC64]: Add of_device layer and make ebus/isa use it. ...
-
Linus Torvalds authored
This is the minimal resume trace code to find which device resume (if any) results in problems. Usually, you'd use the information this generates as a starting point to adding more fine-grained trace event points. Signed-off-by: -
Linus Torvalds authored
Considering that there isn't a lot of hw we can depend on during resume, this is about as good as it gets. This is x86-only for now, although the basic concept (and most of the code) will certainly work on almost any platform. Signed-off-by: -
Russell King authored
GDB couldn't reliably tell the difference between the old and new non-rt sigframes, so provide it with a number at the beginning which will never appear in the old sigframe, and hence provide gdb with a reliable way to tell the two apart. Signed-off-by: -
Russell King authored
-
Russell King authored
-
Ben Dooks authored
Patch from Ben Dooks Enable power management for Simtec Osiris Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Ben Dooks authored
Patch from Ben Dooks Move the decoding of the IRQ_EXT4 and above out of the entry macro, and into an chained irq handler as the EXTINT registers move depending on the CPU being used. Signed-off-by:
-
Ben Dooks authored
Patch from Ben Dooks Make the S3C2410 use the same usb clock naming as the S3C2412 Signed-off-by:
-
Ben Dooks authored
Patch from Ben Dooks Add basic support for the Samsung/Aiji SMDK2413 Signed-off-by:
-
Ben Dooks authored
Patch from Ben Dooks The current S3C2412 has used to moving S3C24XX_ for the generic form of an register has been moved from the S3C2410. Fixup S3C2410_EXTINTx and S3C2410_EINFLTx to S3C24XX_EXTINTx and S3C24XX_EXTINTx Depends on Patch #3635/1, Patch #3640/1 Signed-off-by:
-
Ben Dooks authored
Patch from Ben Dooks The current S3C2412 support has moved to using S3C24XX_DCLKCON unless the specific DCLKCON is required (S3C2412_DCLKCON or S3C2410_DKCLKCON) Move the few places using S3C2410_DCLKCON to S3C24XX_DCLKCON Depends on Patch #3635/1 Signed-off-by:
-
Ben Dooks authored
Patch from Ben Dooks Serial port support for the on-board UART blocks on the Samsung S3C2412 and S3C2413 UARTs. Signed-off-by:
-
Ben Dooks authored
Patch from Ben Dooks Clock support for the clocks on the Samsung S3C2412 and S3C2413 SoCs. This provides clock enables and parent selection for all the standard clocks. Signed-off-by:
-
Ben Dooks authored
Patch from Ben Dooks Update the clocks with the MPLL clock, and use it as the parent. Also export these to the rest of arch/arm/mach-s3c2410 Signed-off-by:
-
Ben Dooks authored
Patch from Ben Dooks Select CONFIG_CPU_ARM926 when CONFIG_CPU_S3C2412 is selected. Signed-off-by:
-
Ben Dooks authored
Patch from Ben Dooks Add support for the Samsung S3C2412 and S3C2413 range of SoCs. This patch contains the core identification, debug macros, and basic register updates to get these to build. Signed-off-by:
-
