- 19 Oct, 2016 4 commits
-
-
Jiri Benc authored
Some symbols exported to other modules are really used only by openvswitch.ko. Remove the exports. Tested by loading all 4 openvswitch modules, nothing breaks. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
ovs_vport_deferred_free is not used anywhere. It's the only caller of free_vport_rcu thus this one can be removed, too. Signed-off-by:
-
Thomas Graf authored
A BPF program is required to check the return register of a map_elem_lookup() call before accessing memory. The verifier keeps track of this by converting the type of the result register from PTR_TO_MAP_VALUE_OR_NULL to PTR_TO_MAP_VALUE after a conditional jump ensures safety. This check is currently exclusively performed for the result register 0. In the event the compiler reorders instructions, BPF_MOV64_REG instructions may be moved before the conditional jump which causes them to keep their type PTR_TO_MAP_VALUE_OR_NULL to which the verifier objects when the register is accessed: 0: (b7) r1 = 10 1: (7b) *(u64 *)(r10 -8) = r1 2: (bf) r2 = r10 3: (07) r2 += -8 4: (18) r1 = 0x59c00000 6: (85) call 1 7: (bf) r4 = r0 8: (15) if r0 == 0x0 goto pc+1 R0=map_value(ks=8,vs=8) R4=map_value_or_null(ks=8,vs=8) R10=fp 9: (7a) *(u64 *)(r4 +0) = 0 R4 invalid mem access 'map_value_or_null' This commit extends the verifier to keep track of all identical PTR_TO_MAP_VALUE_OR_NULL registers after a map_elem_lookup() by assigning them an ID and then marking them all when the conditional jump is observed. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Reviewed-by:
Josef Bacik <jbacik@fb.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct fs_enet_private, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
- 18 Oct, 2016 36 commits
-
-
Wei Yongjun authored
The memory return by kzalloc() has already be set to zero, so remove useless memset(0). Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/net/dsa/mv88e6xxx/chip.c:2866:5: warning: symbol 'mv88e6xxx_g1_set_switch_mac' was not declared. Should it be static? Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
hayeswang authored
Add the following four products of Lenovo and sort the order of the list. VID PID 0x17ef 0x3062 0x17ef 0x3069 0x17ef 0x720c 0x17ef 0x7214 Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Gao Feng authored
Use sizeof variable instead of literal number to enhance the readability. Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
-
David S. Miller authored
Robert Jarzmik says: ==================== support smc91x on mainstone and devicetree This series aims at bringing support to mainstone board on a device-tree based build, as what is already in place for legacy mainstone. The bulk of the mainstone "specific" behavior is that a u16 write doesn't work on a address of the form 4*n + 2, while it works on 4*n. The legacy workaround was in SMC_outw(), with calls to machine_is_mainstone(). These calls don't work with a pxa27x-dt machine type, which is used when a generic device-tree pxa27x machine is used to boot the mainstone board. Therefore, this series enables the smc91c111 adapter of the mainstone board to work on a device-tree build, exaclty as it's been working for years with the legacy arch/arm/mach-pxa/mainstone.c definition. As a sum up, this extends an existing mechanism to device-tree based pxa platforms. ==================== Signed-off-by: -
Robert Jarzmik authored
Add a workaround for mainstone, idp and stargate2 boards, for u16 writes which must be aligned on 32 bits addresses. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Cc: Jeremy Linton <jeremy.linton@arm.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Robert Jarzmik authored
For device-tree builds, platforms such as mainstone, idp and stargate2 must have their u16 writes all aligned on 32 bit boundaries. This is already enabled in platform data builds, and this patch adds it to device-tree builds. Signed-off-by:
-
Robert Jarzmik authored
Writes to u16 has a special handling on 3 PXA platforms, where the hardware wiring forces these writes to be u32 aligned. This patch isolates this handling for PXA platforms as before, but enables this "workaround" to be set up dynamically, which will be the case in device-tree build types. This patch was tested on 2 PXA platforms : mainstone, which relies on the workaround, and lubbock, which doesn't. Signed-off-by:
-
Robert Jarzmik authored
Instead of having the smc91x driver relying on machine_is_*() calls, provide this data through platform data, ie. idp, mainstone and stargate. This way, the driver doesn't need anymore machine_is_*() calls, which wouldn't work anymore with a device-tree build. Signed-off-by:
-
Bert Kenward authored
Fixes: 61e84623 ("net: centralize net_device min/max MTU checking") Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Signed-off-by:
-
David S. Miller authored
Zach Brown says: ==================== Add support for led triggers on phy link state change Fix skge driver that declared enum contants that conflicted with enum constants in linux/leds.h Create function that encapsulates actions taken during the adjust phy link step of phy state changes. Create function that provides list of speeds currently supported by the phy. Add support for led triggers on phy link state changes by adding a config option. When set the config option will create a set of led triggers for each phy device. Users can use the led triggers to represent link state changes on the phy. v2: * New patch that creates phy_adjust_link function to encapsulate actions taken when adjusting phy link during phy state changes * led trigger speed strings changed to match existing phy speed strings * New function that maps speeds to led triggers * Replace magic constants with definitions when declaring trigger name buffer and number of triggers. v3: * Changed LED_ON to LED_REG_ON in skge driver to avoid possible future conflict and improve consistency. * Dropped rtl8712 patch that was accepted separately. v4: * tweaked commit message v5 * Changed commit message to explain relationship between the new triggers and leds driven by phys. * Added new patch that creates phy_supported_speeds function. * Moved phy_leds_triggers_register and phy_leds_triggers_unregister to phy_attach and phy_detach respectively. This change is so the phydev->supported field will be filled by the time the triggers are registered. * Changed hardcoded list of triggers to dynamic list determined by speeds return by phy_supported_speeds. ==================== Signed-off-by: -
Zach Brown authored
Create an option CONFIG_LED_TRIGGER_PHY (default n), which will create a set of led triggers for each instantiated PHY device. There is one LED trigger per link-speed, per-phy. The triggers are registered during phy_attach and unregistered during phy_detach. This allows for a user to configure their system to allow a set of LEDs not controlled by the phy to represent link state changes on the phy. LEDS controlled by the phy are unaffected. For example, we have a board where some of the leds in the RJ45 socket are controlled by the phy, but others are not. Using the triggers provided by this patch the leds not controlled by the phy can be configured to show the current speed of the ethernet connection. The leds controlled by the phy are unaffected. Signed-off-by:
Josh Cartwright <josh.cartwright@ni.com> Signed-off-by:
Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by:
Zach Brown <zach.brown@ni.com> Signed-off-by:
-
Zach Brown authored
net: phy: Create phy_supported_speeds function which lists speeds currently supported by a phydevice phy_supported_speeds provides a means to get a list of all the speeds a phy device currently supports. Signed-off-by:
-
Zach Brown authored
During phy state machine state transitions some set of actions should occur whenever the link state changes. These actions should be encapsulated into a single function This patch adds the phy_adjust_link function, which is called whenever phydev->adjust_link would have been called before. Actions that should occur whenever the phy link is adjusted can now be added to the phy_adjust_link function. Signed-off-by:
-
Zach Brown authored
Adding led support for phy causes namespace conflicts for some phy drivers. The marvel skge driver declared an enum for representing the states of Link LED Register. The enum contained constant LED_OFF which conflicted with declartation found in linux/leds.h. LED_OFF changed to LED_REG_OFF Also changed LED_ON to LED_REG_ON to avoid possible future conflict and for consistency. Signed-off-by:
-
David S. Miller authored
David Ahern says: ==================== net: Fix netdev adjacency tracking The netdev adjacency tracking is failing to create proper dependencies for some topologies. For example this topology +--------+ | myvrf | +--------+ | | | +---------+ | | macvlan | | +---------+ | | +----------+ | bridge | +----------+ | +--------+ | bond1 | +--------+ | +--------+ | eth3 | +--------+ hits 1 of 2 problems depending on the order of enslavement. The base set of commands for both cases: ip link add bond1 type bond ip link set bond1 up ip link set eth3 down ip link set eth3 master bond1 ip link set eth3 up ip link add bridge type bridge ip link set bridge up ip link add macvlan link bridge type macvlan ip link set macvlan up ip link add myvrf type vrf table 1234 ip link set myvrf up ip link set bridge master myvrf Case 1 enslave macvlan to the vrf before enslaving the bond to the bridge: ip link set macvlan master myvrf ip link set bond1 master bridge Attempts to delete the VRF: ip link delete myvrf trigger the BUG in __netdev_adjacent_dev_remove: [ 587.405260] tried to remove device eth3 from myvrf [ 587.407269] ------------[ cut here ]------------ [ 587.408918] kernel BUG at /home/dsa/kernel.git/net/core/dev.c:5661! [ 587.411113] invalid opcode: 0000 [#1] SMP [ 587.412454] Modules linked in: macvlan bridge stp llc bonding vrf [ 587.414765] CPU: 0 PID: 726 Comm: ip Not tainted 4.8.0+ #109 [ 587.416766] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 587.420241] task: ffff88013ab6eec0 task.stack: ffffc90000628000 [ 587.422163] RIP: 0010:[<ffffffff813cef03>] [<ffffffff813cef03>] __netdev_adjacent_dev_remove+0x40/0x12c ... [ 587.446053] Call Trace: [ 587.446424] [<ffffffff813d1542>] __netdev_adjacent_dev_unlink+0x20/0x3c [ 587.447390] [<ffffffff813d16a3>] netdev_upper_dev_unlink+0xfa/0x15e [ 587.448297] [<ffffffffa00003a3>] vrf_del_slave+0x13/0x2a [vrf] [ 587.449153] [<ffffffffa00004a4>] vrf_dev_uninit+0xea/0x114 [vrf] [ 587.450036] [<ffffffff813d19b0>] rollback_registered_many+0x22b/0x2da [ 587.450974] [<ffffffff813d1aac>] unregister_netdevice_many+0x17/0x48 [ 587.451903] [<ffffffff813de444>] rtnl_delete_link+0x3c/0x43 [ 587.452719] [<ffffffff813dedcd>] rtnl_dellink+0x180/0x194 When the BUG is converted to a WARN_ON it shows 4 missing adjacencies: eth3 - myvrf, mvrf - eth3, bond1 - myvrf and myvrf - bond1 All of those are because the __netdev_upper_dev_link function does not properly link macvlan lower devices to myvrf when it is enslaved. The second case just flips the ordering of the enslavements: ip link set bond1 master bridge ip link set macvlan master myvrf Then run: ip link delete bond1 ip link delete myvrf The vrf delete command hangs because myvrf has a reference that has not been released. In this case the removal code does not account for 2 paths between eth3 and myvrf - one from bridge to vrf and the other through the macvlan. Rather than try to maintain a linked list of all upper and lower devices per netdevice, only track the direct neighbors. The remaining stack can be determined by recursively walking the neighbors. The existing netdev_for_each_all_upper_dev_rcu, netdev_for_each_all_lower_dev and netdev_for_each_all_lower_dev_rcu macros are replaced with APIs that walk the upper and lower device lists. The new APIs take a callback function and a data arg that is passed to the callback for each device in the list. Drivers using the old macros are converted in separate patches to make it easier on reviewers. It is an API conversion only; no functional change is intended. v3 - address Stephen's comment to simplify logic and remove typecasts v2 - fixed bond0 references in cover-letter - fixed definition of netdev_next_lower_dev_rcu to mirror the upper_dev version. ==================== Signed-off-by: -
David Ahern authored
Adjacency code only has debugs for the insert case. Add debugs for the remove path and make both consistently worded to make it easier to follow the insert and removal with reference counts. In addition, change the BUG to a WARN_ON. A missing adjacency at removal time is not cause for a panic. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David Ahern authored
Lower list should be empty just like upper. Signed-off-by:
-
David Ahern authored
Only direct adjacencies are maintained. All upper or lower devices can be learned via the new walk API which recursively walks the adj_list for upper devices or lower devices. Signed-off-by:
-
David Ahern authored
Convert rocker to the new dev walk API. This is just a code conversion; no functional change is intended. v2 - removed typecast of data Signed-off-by:
-
David Ahern authored
Convert mlxsw users to new dev walk API. This is just a code conversion; no functional change is intended. Signed-off-by:
-
David Ahern authored
Convert ixgbe users to new dev walk API. This is just a code conversion; no functional change is intended. Signed-off-by:
-
David Ahern authored
Convert ipoib_get_net_dev_match_addr to the new upper device walk API. This is just a code conversion; no functional change is intended. v2 - removed typecast of data Signed-off-by:
-
David Ahern authored
Convert rdma_is_upper_dev_rcu, handle_netdev_upper and ipoib_get_net_dev_match_addr to the new upper device walk API. This is just a code conversion; no functional change is intended. v2 - removed typecast of data Signed-off-by:
-
David Ahern authored
Convert alb_send_learning_packets and bond_has_this_ip to use the new netdev_walk_all_upper_dev_rcu API. In both cases this is just a code conversion; no functional change is intended. v2 - removed typecast of data and simplified bond_upper_dev_walk Signed-off-by:
-
David Ahern authored
This patch introduces netdev_walk_all_upper_dev_rcu, netdev_walk_all_lower_dev and netdev_walk_all_lower_dev_rcu. These functions recursively walk the adj_list of devices to determine all upper and lower devices. The functions take a callback function that is invoked for each device in the list. If the callback returns non-0, the walk is terminated and the functions return that code back to callers. v3 - simplified netdev_has_upper_dev_all_rcu and __netdev_has_upper_dev and removed typecast as suggested by Stephen v2 - fixed definition of netdev_next_lower_dev_rcu to mirror the upper_dev version. Signed-off-by:
-
David Ahern authored
Commit 93409033 ("net: Add netdev all_adj_list refcnt propagation to fix panic") propagated the refnr to insert and remove functions tracking the netdev adjacency graph. However, for the insert path the refnr can only be 1. Accordingly, remove the refnr argument to make that clear. ie., the refnr arg in 93409033 was only needed for the remove path. Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== Move to BPF selftests This set improves the test_verifier and test_maps suite and moves it over to a new BPF selftest directory, so we can keep improving it under kernel selftest umbrella. This also integrates a test script for checking test_bpf.ko under various JIT options. ==================== Signed-off-by: -
Daniel Borkmann authored
Add a start of a test suite for kernel selftests. This moves test_verifier and test_maps over to tools/testing/selftests/bpf/ along with various code improvements and also adds a script for invoking test_bpf module. The test suite can simply be run via selftest framework, f.e.: # cd tools/testing/selftests/bpf/ # make # make run_tests Both test_verifier and test_maps were kind of misplaced in samples/bpf/ directory and we were looking into adding them to selftests for a while now, so it can be picked up by kbuild bot et al and hopefully also get more exposure and thus new test case additions. Signed-off-by:
-
Daniel Borkmann authored
Add several spill/fill tests. Besides others, one that performs xadd on the spilled register, one ldx/stx test where different types are spilled from two branches and read out from common path. Verfier does handle all correctly. Signed-off-by:
-
David S. Miller authored
Jarod Wilson says: ==================== ethernet: use core min/max MTU checking Now that the network stack core min/max MTU checking infrastructure is in place, time to start making drivers use it. We'll start with the easiest ones, the ethernet drivers, split roughly by vendor, with a catch-all patch at the end. For the most part, every patch does the same essential thing: removes the MTU range checking from the drivers' ndo_change_mtu function, puts those ranges into the core net_device min_mtu and max_mtu fields, and where possible, removes ndo_change_mtu functions entirely. These patches have all been built through the 0-day build infrastructure provided by Intel, on top of net-next as of October 17. ==================== Signed-off-by: -
Jarod Wilson authored
et131x: min_mtu 64, max_mtu 9216 altera_tse: min_mtu 64, max_mtu 1500 amd8111e: min_mtu 60, max_mtu 9000 bnad: min_mtu 46, max_mtu 9000 macb: min_mtu 68, max_mtu 1500 or 10240 depending on hardware capability xgmac: min_mtu 46, max_mtu 9000 cxgb2: min_mtu 68, max_mtu 9582 (pm3393) or 9600 (vsc7326) enic: min_mtu 68, max_mtu 9000 gianfar: min_mtu 50, max_mu 9586 hns_enet: min_mtu 68, max_mtu 9578 (v1) or 9706 (v2) ksz884x: min_mtu 60, max_mtu 1894 myri10ge: min_mtu 68, max_mtu 9000 natsemi: min_mtu 64, max_mtu 2024 nfp: min_mtu 68, max_mtu hardware-specific forcedeth: min_mtu 64, max_mtu 1500 or 9100, depending on hardware pch_gbe: min_mtu 46, max_mtu 10300 pasemi_mac: min_mtu 64, max_mtu 9000 qcaspi: min_mtu 46, max_mtu 1500 - remove qcaspi_netdev_change_mtu as it is now redundant rocker: min_mtu 68, max_mtu 9000 sxgbe: min_mtu 68, max_mtu 9000 stmmac: min_mtu 46, max_mtu depends on hardware tehuti: min_mtu 60, max_mtu 16384 - driver had no max mtu checking, but product docs say 16k jumbo packets are supported by the hardware netcp: min_mtu 68, max_mtu 9486 - remove netcp_ndo_change_mtu as it is now redundant via-velocity: min_mtu 64, max_mtu 9000 octeon: min_mtu 46, max_mtu 65370 CC: netdev@vger.kernel.org CC: Mark Einon <mark.einon@gmail.com> CC: Vince Bridgers <vbridger@opensource.altera.com> CC: Rasesh Mody <rasesh.mody@qlogic.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Christian Benvenuti <benve@cisco.com> CC: Sujith Sankar <ssujith@cisco.com> CC: Govindarajulu Varadarajan <_govind@gmx.com> CC: Neel Patel <neepatel@cisco.com> CC: Claudiu Manoil <claudiu.manoil@freescale.com> CC: Yisen Zhuang <yisen.zhuang@huawei.com> CC: Salil Mehta <salil.mehta@huawei.com> CC: Hyong-Youb Kim <hykim@myri.com> CC: Jakub Kicinski <jakub.kicinski@netronome.com> CC: Olof Johansson <olof@lixom.net> CC: Jiri Pirko <jiri@resnulli.us> CC: Byungho An <bh74.an@samsung.com> CC: Girish K S <ks.giri@samsung.com> CC: Vipul Pandya <vipul.pandya@samsung.com> CC: Giuseppe Cavallaro <peppe.cavallaro@st.com> CC: Alexandre Torgue <alexandre.torgue@st.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Wingman Kwok <w-kwok2@ti.com> CC: Murali Karicheri <m-karicheri2@ti.com> CC: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Jarod Wilson authored
gelic_net: min_mtu 64, max_mtu 1518 - remove gelic_net_change_mtu now that it is redundant spidernet: min_Mtu 64, max_mtu 2294 - remove spiter_net_change_mtu now that it is redundant CC: netdev@vger.kernel.org CC: Geoff Levand <geoff@infradead.org> CC: Ishizaki Kou <kou.ishizaki@toshiba.co.jp> Signed-off-by:
-
Jarod Wilson authored
tilegx: min_mtu 68, max_mtu 1500 or 9000, depending on modparam - remove tile_net_change_mtu now that it is fully redundant tilepro: min_mtu 68, max_mtu 1500 - hardware supports jumbo packets up to 10226, but it's not implemented or tested yet, according to code comments CC: netdev@vger.kernel.org CC: Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by:
-
Jarod Wilson authored
ehea: min_mtu 68, max_mtu 9022 - remove ehea_change_mtu, it's now redundant emac: min_mtu 46, max_mtu 1500 or whatever gets read from OF CC: netdev@vger.kernel.org CC: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by:
-
Jarod Wilson authored
liquidio: min_mtu 68, max_mtu 16000 thunder: min_mtu 64, max_mtu 9200 CC: netdev@vger.kernel.org CC: Sunil Goutham <sgoutham@cavium.com> CC: Robert Richter <rric@kernel.org> CC: Derek Chickles <derek.chickles@caviumnetworks.com> CC: Satanand Burla <satananda.burla@caviumnetworks.com> CC: Felix Manlunas <felix.manlunas@caviumnetworks.com> CC: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by:
-
