After disabling fastmap(ubi->fm_disabled = 1), fastmap won't be updated,
fm_anchor PEB is missed being scheduled for erasing. Besides, fm_anchor
PEB may have smallest erase count, it doesn't participate wear-leveling.
The difference of erase count between fm_anchor PEB and other PEBs will
be larger and larger later on.

In which situation fastmap can be disabled? Initially, we have an UBI
image with fastmap. Then the image will be atttached without module
parameter 'fm_autoconvert', ubi turns to full scanning mode in one
random attaching process(eg. bad fastmap caused by powercut), ubi
fastmap is disabled since then.

Fix it by not getting fm_anchor if fastmap is disabled in
ubi_refill_pools().

Fetch a reproducer in [Link].

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216341
Fixes: 4b68bf9a ("ubi: Select fastmap anchor PEBs considering ...")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

There are two states for ubifs writing pages:
1. Dirty, Private
2. Not Dirty, Not Private

The normal process cannot go to ubifs_releasepage() which means there
exists pages being private but not dirty. Reproducer[1] shows that it
could occur (which maybe related to [2]) with following process:

     PA                     PB                    PC
lock(page)[PA]
ubifs_write_end
  attach_page_private         // set Private
  __set_page_dirty_nobuffers  // set Dirty
unlock(page)

write_cache_pages[PA]
  lock(page)
  clear_page_dirty_for_io(page)	// clear Dirty
  ubifs_writepage

                        do_truncation[PB]
			  truncate_setsize
			    i_size_write(inode, newsize) // newsize = 0

    i_size = i_size_read(inode)	// i_size = 0
    end_index = i_size >> PAGE_SHIFT
    if (page->index > end_index)
      goto out // jump
out:
unlock(page)   // Private, Not Dirty

						generic_fadvise[PC]
						  lock(page)
						  invalidate_inode_page
						    try_to_release_page
						      ubifs_releasepage
						        ubifs_assert(c, 0)
		                                        // bad assertion!
						  unlock(page)
			  truncate_pagecache[PB]

Then we may get following assertion failed:
  UBIFS error (ubi0:0 pid 1683): ubifs_assert_failed [ubifs]:
  UBIFS assert failed: 0, in fs/ubifs/file.c:1513
  UBIFS warning (ubi0:0 pid 1683): ubifs_ro_mode [ubifs]:
  switched to read-only mode, error -22
  CPU: 2 PID: 1683 Comm: aa Not tainted 5.16.0-rc5-00184-g0bca5994cacc-dirty #308
  Call Trace:
    dump_stack+0x13/0x1b
    ubifs_ro_mode+0x54/0x60 [ubifs]
    ubifs_assert_failed+0x4b/0x80 [ubifs]
    ubifs_releasepage+0x67/0x1d0 [ubifs]
    try_to_release_page+0x57/0xe0
    invalidate_inode_page+0xfb/0x130
    __invalidate_mapping_pages+0xb9/0x280
    invalidate_mapping_pagevec+0x12/0x20
    generic_fadvise+0x303/0x3c0
    ksys_fadvise64_64+0x4c/0xb0

[1] https://bugzilla.kernel.org/show_bug.cgi?id=215373
[2] https://linux-mtd.infradead.narkive.com/NQoBeT1u/patch-rfc-ubifs-fix-assert-failed-in-ubifs-set-page-dirty

Fixes: 1e51764a ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

There are two states for ubifs writing pages:
1. Dirty, Private
2. Not Dirty, Not Private

There is a third possibility which maybe related to [1] that page is
private but not dirty caused by following process:

          PA
lock(page)
ubifs_write_end
  attach_page_private		// set Private
    __set_page_dirty_nobuffers	// set Dirty
unlock(page)

write_cache_pages
  lock(page)
  clear_page_dirty_for_io(page)	// clear Dirty
  ubifs_writepage
    write_inode
    // fail, goto out, following codes are not executed
    // do_writepage
    //   set_page_writeback 	// set Writeback
    //   detach_page_private	// clear Private
    //   end_page_writeback 	// clear Writeback
    out:
    unlock(page)		// Private, Not Dirty

                                       PB
				ksys_fadvise64_64
				  generic_fadvise
				     invalidate_inode_page
				     // page is neither Dirty nor Writeback
				       invalidate_complete_page
				       // page_has_private is true
					 try_to_release_page
					   ubifs_releasepage
					     ubifs_assert(c, 0) !!!

Then we may get following assertion failed:
  UBIFS error (ubi0:0 pid 1492): ubifs_assert_failed [ubifs]:
  UBIFS assert failed: 0, in fs/ubifs/file.c:1499
  UBIFS warning (ubi0:0 pid 1492): ubifs_ro_mode [ubifs]:
  switched to read-only mode, error -22
  CPU: 2 PID: 1492 Comm: aa Not tainted 5.16.0-rc2-00012-g7bb767dee0ba-dirty
  Call Trace:
    dump_stack+0x13/0x1b
    ubifs_ro_mode+0x54/0x60 [ubifs]
    ubifs_assert_failed+0x4b/0x80 [ubifs]
    ubifs_releasepage+0x7e/0x1e0 [ubifs]
    try_to_release_page+0x57/0xe0
    invalidate_inode_page+0xfb/0x130
    invalidate_mapping_pagevec+0x12/0x20
    generic_fadvise+0x303/0x3c0
    vfs_fadvise+0x35/0x40
    ksys_fadvise64_64+0x4c/0xb0

Jump [2] to find a reproducer.

[1] https://linux-mtd.infradead.narkive.com/NQoBeT1u/patch-rfc-ubifs-fix-assert-failed-in-ubifs-set-page-dirty
[2] https://bugzilla.kernel.org/show_bug.cgi?id=215357

Fixes: 1e51764a ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Following process will cause a memleak for copied up znode:

dirty_cow_znode
  zn = copy_znode(c, znode);
  err = insert_old_idx(c, zbr->lnum, zbr->offs);
  if (unlikely(err))
     return ERR_PTR(err);   // No one refers to zn.

Fix it by adding copied znode back to tnc, then it will be freed
by ubifs_destroy_tnc_subtree() while closing tnc.

Fetch a reproducer in [Link].

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216705
Fixes: 1e51764a ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Dirty znodes will be written on flash in committing process with
following states:

	      process A			|  znode state
------------------------------------------------------
do_commit				| DIRTY_ZNODE
  ubifs_tnc_start_commit		| DIRTY_ZNODE
   get_znodes_to_commit			| DIRTY_ZNODE | COW_ZNODE
    layout_commit			| DIRTY_ZNODE | COW_ZNODE
     fill_gap                           | 0
  write master				| 0 or OBSOLETE_ZNODE

	      process B			|  znode state
------------------------------------------------------
do_commit				| DIRTY_ZNODE[1]
  ubifs_tnc_start_commit		| DIRTY_ZNODE
   get_znodes_to_commit			| DIRTY_ZNODE | COW_ZNODE
  ubifs_tnc_end_commit			| DIRTY_ZNODE | COW_ZNODE
   write_index                          | 0
  write master				| 0 or OBSOLETE_ZNODE[2] or
					| DIRTY_ZNODE[3]

[1] znode is dirtied without concurrent committing process
[2] znode is copied up (re-dirtied by other process) before cleaned
    up in committing process
[3] znode is re-dirtied after cleaned up in committing process

Currently, the clean znode count is updated in free_obsolete_znodes(),
which is called only in normal path. If do_commit failed, clean znode
count won't be updated, which triggers a failure ubifs assertion[4] in
ubifs_tnc_close():
 ubifs_assert_failed [ubifs]: UBIFS assert failed: freed == n

[4] Commit 380347e9 ("UBIFS: Add an assertion for clean_zn_cnt").

Fix it by re-statisticing cleaned znode count in tnc_destroy_cnext().

Fetch a reproducer in [Link].

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216704
Fixes: 1e51764a ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Some interface files in debugfs support the read method
dfs_file_read(), but their rwx permissions is shown as
unreadable.

In the user mode, the following problem can be clearly seen:

 # ls -l /sys/kernel/debug/ubi/ubi0/
 total 0
 --w------- 1 root root 0 Oct 22 16:26 chk_fastmap
 --w------- 1 root root 0 Oct 22 16:26 chk_gen
 --w------- 1 root root 0 Oct 22 16:26 chk_io
 -r-------- 1 root root 0 Oct 22 16:26 detailed_erase_block_info
 --w------- 1 root root 0 Oct 22 16:26 tst_disable_bgt
 --w------- 1 root root 0 Oct 22 16:26 tst_emulate_bitflips
 --w------- 1 root root 0 Oct 22 16:26 tst_emulate_io_failures
 --w------- 1 root root 0 Oct 22 16:26 tst_emulate_power_cut
 --w------- 1 root root 0 Oct 22 16:26 tst_emulate_power_cut_max
 --w------- 1 root root 0 Oct 22 16:26 tst_emulate_power_cut_min

It shows that these files do not have read permission 'r',
but we can actually read their contents.

 # echo 1 > /sys/kernel/debug/ubi/ubi0/chk_io
 # cat /sys/kernel/debug/ubi/ubi0/chk_io
 1

User's permission access is determined by capabilities.
Of course, the root user is not restricted from reading
these files.

When reading a debugfs file, the process is as follows:

 ksys_read()
   vfs_read()
     if (file->f_op->read)
       file->f_op->read()
         full_proxy_open()
           real_fops->read()
             dfs_file_read() -- Read method of debugfs file.
     else if (file->f_op->read_iter)
       new_sync_read()
     else
       ret = -EINVAL -- Return -EINVAL if no read method.

This indicates that the debugfs file can be read as long as the read
method of the debugfs file is registered. This patch adds the read
permission display for file that support the read method.
Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

It willl cause null-ptr-deref in the following case:

uif_init()
  ubi_add_volume()
    cdev_add() -> if it fails, call kill_volumes()
    device_register()

kill_volumes() -> if ubi_add_volume() fails call this function
  ubi_free_volume()
    cdev_del()
    device_unregister() -> trying to delete a not added device,
			   it causes null-ptr-deref

So in ubi_free_volume(), it delete devices whether they are added
or not, it will causes null-ptr-deref.

Handle the error case whlie calling ubi_add_volume() to fix this
problem. If add volume fails, set the corresponding vol to null,
so it can not be accessed in kill_volumes() and release the
resource in ubi_add_volume() error path.

Fixes: 801c135c ("UBI: Unsorted Block Images")
Suggested-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

The UBI driver can use the IOCTL to disable the fastmap after the
mainline 669d2044 ("ubi: fastmap: Add fastmap control support
for 'UBI_IOCATT' ioctl"). To destroy the fastmap on a old image,
we need to reattach the device in user space.

However, if the UBI driver build in kernel and the UBI volume is
the root partition, the UBI device cannot be reattached in user
space. To disable fastmap in this case, the UBI must provide the
kernel cmdline parameters to disable fastmap during attach.

This patch add 'enable_fm' as 5th module init parameter of mtd=xx to
control fastmap enable or not. When the value is 0, fastmap will not
create and existed fastmap will destroyed for the given ubi device.
Default value is 0.

To enable or disable fastmap during module loading, fm_autoconvert
must be set to non-zero.

+-----------------+---------------+---------------------------+
|        \        |  enable_fm=0  |  enable_fm=1              |
+-----------------+---------------+---------------------------+
|fm_autoconvert=Y |  disable fm   |  enable fm                |
+---------------------------------+---------------------------+
|fm_autoconvert=N |  disable fm   | Enable fastmap if fastmap |
|                 |               | exists on the old image   |
+-------------------------------------------------------------+

Example:
  # - Attach mtd1 to ubi1, disable fastmap, mtd2 to ubi2, enable
      fastmap.
  # modprobe ubi mtd=1,0,0,1,0 mtd=2,0,0,2,1 fm_autoconvert=1

  # - If 5th parameter is not specified, the value is 0, fastmap is
      disable
  # modprobe ubi mtd=1 fm_autoconvert=1

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216623Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

kmemleak reported a sequence of memory leaks, and show them as following:

  unreferenced object 0xffff8881575f8400 (size 1024):
    comm "mount", pid 19625, jiffies 4297119604 (age 20.383s)
    hex dump (first 32 bytes):
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    backtrace:
      [<ffffffff8176cecd>] __kmalloc+0x4d/0x150
      [<ffffffffa0406b2b>] ubifs_mount+0x307b/0x7170 [ubifs]
      [<ffffffff819fa8fd>] legacy_get_tree+0xed/0x1d0
      [<ffffffff81936f2d>] vfs_get_tree+0x7d/0x230
      [<ffffffff819b2bd4>] path_mount+0xdd4/0x17b0
      [<ffffffff819b37aa>] __x64_sys_mount+0x1fa/0x270
      [<ffffffff83c14295>] do_syscall_64+0x35/0x80
      [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

  unreferenced object 0xffff8881798a6e00 (size 512):
    comm "mount", pid 19677, jiffies 4297121912 (age 37.816s)
    hex dump (first 32 bytes):
      6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
      6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
    backtrace:
      [<ffffffff8176cecd>] __kmalloc+0x4d/0x150
      [<ffffffffa0418342>] ubifs_wbuf_init+0x52/0x480 [ubifs]
      [<ffffffffa0406ca5>] ubifs_mount+0x31f5/0x7170 [ubifs]
      [<ffffffff819fa8fd>] legacy_get_tree+0xed/0x1d0
      [<ffffffff81936f2d>] vfs_get_tree+0x7d/0x230
      [<ffffffff819b2bd4>] path_mount+0xdd4/0x17b0
      [<ffffffff819b37aa>] __x64_sys_mount+0x1fa/0x270
      [<ffffffff83c14295>] do_syscall_64+0x35/0x80
      [<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

The problem is that the ubifs_wbuf_init() returns an error in the
loop which in the alloc_wbufs(), then the wbuf->buf and wbuf->inodes
that were successfully alloced before are not freed.

Fix it by adding error hanging path in alloc_wbufs() which frees
the memory alloced before when ubifs_wbuf_init() returns an error.

Fixes: 1e51764a ("UBIFS: add new flash file system")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

There is a memory leaks problem reported by kmemleak:

unreferenced object 0xffff888102007a00 (size 128):
  comm "ubirsvol", pid 32090, jiffies 4298464136 (age 2361.231s)
  hex dump (first 32 bytes):
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
  backtrace:
[<ffffffff8176cecd>] __kmalloc+0x4d/0x150
[<ffffffffa02a9a36>] ubi_eba_create_table+0x76/0x170 [ubi]
[<ffffffffa029764e>] ubi_resize_volume+0x1be/0xbc0 [ubi]
[<ffffffffa02a3321>] ubi_cdev_ioctl+0x701/0x1850 [ubi]
[<ffffffff81975d2d>] __x64_sys_ioctl+0x11d/0x170
[<ffffffff83c142a5>] do_syscall_64+0x35/0x80
[<ffffffff83e0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

This is due to a mismatch between create and destroy interfaces, and
in detail that "new_eba_tbl" created by ubi_eba_create_table() but
destroyed by kfree(), while will causing "new_eba_tbl->entries" not
freed.

Fix it by replacing kfree(new_eba_tbl) with
ubi_eba_destroy_table(new_eba_tbl)

Fixes: 799dca34 ("UBI: hide EBA internals")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

There is an use-after-free problem reported by KASAN:
  ==================================================================
  BUG: KASAN: use-after-free in ubi_eba_copy_table+0x11f/0x1c0 [ubi]
  Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735

  CPU: 2 PID: 4735 Comm: ubirsvol
  Not tainted 6.1.0-rc1-00003-g84fa3304a7fc-dirty #14
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
  BIOS 1.14.0-1.fc33 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x34/0x44
   print_report+0x171/0x472
   kasan_report+0xad/0x130
   ubi_eba_copy_table+0x11f/0x1c0 [ubi]
   ubi_resize_volume+0x4f9/0xbc0 [ubi]
   ubi_cdev_ioctl+0x701/0x1850 [ubi]
   __x64_sys_ioctl+0x11d/0x170
   do_syscall_64+0x35/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0
   </TASK>

When ubi_change_vtbl_record() returns an error in ubi_resize_volume(),
"new_eba_tbl" will be freed on error handing path, but it is holded
by "vol->eba_tbl" in ubi_eba_replace_table(). It means that the liftcycle
of "vol->eba_tbl" and "vol" are different, so when resizing volume in
next time, it causing an use-after-free fault.

Fix it by not freeing "new_eba_tbl" after it replaced in
ubi_eba_replace_table(), while will be freed in next volume resizing.

Fixes: 801c135c ("UBI: Unsorted Block Images")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

UBIFS calculates available space by c->main_bytes - c->lst.total_used
(which means non-index lebs' free and dirty space is accounted into
total available), then index lebs and four lebs (one for gc_lnum, one
for deletions, two for journal heads) are deducted.
In following situation, ubifs may get -ENOSPC from make_reservation():
 LEB 84: DATAHD   free 122880 used 1920  dirty 2176  dark 6144
 LEB 110:DELETION free 126976 used 0     dirty 0     dark 6144 (empty)
 LEB 201:gc_lnum  free 126976 used 0     dirty 0     dark 6144
 LEB 272:GCHD     free 77824  used 47672 dirty 1480  dark 6144
 LEB 356:BASEHD   free 0      used 39776 dirty 87200 dark 6144
 OTHERS: index lebs, zero-available non-index lebs

UBIFS calculates the available bytes is 6888 (How to calculate it:
126976 * 5[remain main bytes] - 1920[used] - 47672[used] - 39776[used] -
126976 * 1[deletions] - 126976 * 1[gc_lnum] - 126976 * 2[journal heads]
- 6144 * 5[dark] = 6888) after doing budget, however UBIFS cannot use
BASEHD's dirty space(87200), because UBIFS cannot find next BASEHD to
reclaim current BASEHD. (c->bi.min_idx_lebs equals to c->lst.idx_lebs,
the empty leb won't be found by ubifs_find_free_space(), and dirty index
lebs won't be picked as gced lebs. All non-index lebs has dirty space
less then c->dead_wm, non-index lebs won't be picked as gced lebs
either. So new free lebs won't be produced.). See more details in Link.

To fix it, reserve one leb for each journal head while doing budget.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216562
Fixes: 1e51764a ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

If target inode is a special file (eg. block/char device) with nlink
count greater than 1, the inode with ui->data will be re-written on
disk. However, UBIFS losts target inode's data_len while doing space
budget. Bad space budget may let make_reservation() return with -ENOSPC,
which could turn ubifs to read-only mode in do_writepage() process.

Fetch a reproducer in [Link].

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216494
Fixes: 1e51764a ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Each dirty inode should reserve 'c->bi.inode_budget' bytes in space
budget calculation. Currently, space budget for dirty inode reports
more space than what UBIFS actually needs to write.

Fixes: 1e51764a ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Just like other operations (eg. ubifs_create, do_rename), add comments
and debug information for ubifs_xrename().
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

There is no space budget for ubifs_xrename(). It may let
make_reservation() return with -ENOSPC, which could turn
ubifs to read-only mode in do_writepage() process.
Fix it by adding space budget for ubifs_xrename().

Fetch a reproducer in [Link].

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216569
Fixes: 9ec64962 ("ubifs: Implement RENAME_EXCHANGE")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Fix bad space budget when symlink file is encrypted. Bad space budget
may let make_reservation() return with -ENOSPC, which could turn ubifs
to read-only mode in do_writepage() process.

Fetch a reproducer in [Link].

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216490
Fixes: ca7f85be ("ubifs: Add support for encrypted symlinks")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

If volume size is not multiple of the sector size 512 a warning is
printed saying that the last non-sector aligned bytes will be ignored.

This should be valid for resizable volumes, but when creating static
volumes which are read only this will always be printed even if the
unaligned data is deliberate.

The message is still valid but the severity should be lowered for static
volumes.
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

When insmod ubifs.ko, a kmemleak reported as below:

 unreferenced object 0xffff88817fb1a780 (size 8):
   comm "insmod", pid 25265, jiffies 4295239702 (age 100.130s)
   hex dump (first 8 bytes):
     75 62 69 66 73 00 ff ff                          ubifs...
   backtrace:
     [<ffffffff81b3fc4c>] slab_post_alloc_hook+0x9c/0x3c0
     [<ffffffff81b44bf3>] __kmalloc_track_caller+0x183/0x410
     [<ffffffff8198d3da>] kstrdup+0x3a/0x80
     [<ffffffff8198d486>] kstrdup_const+0x66/0x80
     [<ffffffff83989325>] kvasprintf_const+0x155/0x190
     [<ffffffff83bf55bb>] kobject_set_name_vargs+0x5b/0x150
     [<ffffffff83bf576b>] kobject_set_name+0xbb/0xf0
     [<ffffffff8100204c>] do_one_initcall+0x14c/0x5a0
     [<ffffffff8157e380>] do_init_module+0x1f0/0x660
     [<ffffffff815857be>] load_module+0x6d7e/0x7590
     [<ffffffff8158644f>] __do_sys_finit_module+0x19f/0x230
     [<ffffffff815866b3>] __x64_sys_finit_module+0x73/0xb0
     [<ffffffff88c98e85>] do_syscall_64+0x35/0x80
     [<ffffffff88e00087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

When kset_register() failed, we should call kset_put to cleanup it.

Fixes: 2e3cbf42 ("ubifs: Export filesystem error counters")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

With CONFIG_UBIFS_FS_AUTHENTICATION not set, the compiler can assume that
ubifs_node_check_hash() is never true and drops the call to ubifs_bad_hash().
Is CONFIG_CC_OPTIMIZE_FOR_SIZE enabled this optimization does not happen anymore.

So When CONFIG_UBIFS_FS and CONFIG_CC_OPTIMIZE_FOR_SIZE is enabled but
CONFIG_UBIFS_FS_AUTHENTICATION is not set, the build errors is as followd:
    ERROR: modpost: "ubifs_bad_hash" [fs/ubifs/ubifs.ko] undefined!

Fix it by add no-op ubifs_bad_hash() for the CONFIG_UBIFS_FS_AUTHENTICATION=n case.

Fixes: 16a26b20 ("ubifs: authentication: Add hashes to index nodes")
Signed-off-by: Li Hua <hucool.lihua@huawei.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>

Ensure that the VID header offset + VID header size does not exceed
the allocated area to avoid slab OOB.

BUG: KASAN: slab-out-of-bounds in crc32_body lib/crc32.c:111 [inline]
BUG: KASAN: slab-out-of-bounds in crc32_le_generic lib/crc32.c:179 [inline]
BUG: KASAN: slab-out-of-bounds in crc32_le_base+0x58c/0x626 lib/crc32.c:197
Read of size 4 at addr ffff88802bb36f00 by task syz-executor136/1555

CPU: 2 PID: 1555 Comm: syz-executor136 Tainted: G        W
6.0.0-1868 #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7860+a7792d29
04/01/2014
Call Trace:
  <TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0x85/0xad lib/dump_stack.c:106
  print_address_description mm/kasan/report.c:317 [inline]
  print_report.cold.13+0xb6/0x6bb mm/kasan/report.c:433
  kasan_report+0xa7/0x11b mm/kasan/report.c:495
  crc32_body lib/crc32.c:111 [inline]
  crc32_le_generic lib/crc32.c:179 [inline]
  crc32_le_base+0x58c/0x626 lib/crc32.c:197
  ubi_io_write_vid_hdr+0x1b7/0x472 drivers/mtd/ubi/io.c:1067
  create_vtbl+0x4d5/0x9c4 drivers/mtd/ubi/vtbl.c:317
  create_empty_lvol drivers/mtd/ubi/vtbl.c:500 [inline]
  ubi_read_volume_table+0x67b/0x288a drivers/mtd/ubi/vtbl.c:812
  ubi_attach+0xf34/0x1603 drivers/mtd/ubi/attach.c:1601
  ubi_attach_mtd_dev+0x6f3/0x185e drivers/mtd/ubi/build.c:965
  ctrl_cdev_ioctl+0x2db/0x347 drivers/mtd/ubi/cdev.c:1043
  vfs_ioctl fs/ioctl.c:51 [inline]
  __do_sys_ioctl fs/ioctl.c:870 [inline]
  __se_sys_ioctl fs/ioctl.c:856 [inline]
  __x64_sys_ioctl+0x193/0x213 fs/ioctl.c:856
  do_syscall_x64 arch/x86/entry/common.c:50 [inline]
  do_syscall_64+0x3e/0x86 arch/x86/entry/common.c:80
  entry_SYSCALL_64_after_hwframe+0x63/0x0
RIP: 0033:0x7f96d5cf753d
Code:
RSP: 002b:00007fffd72206f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f96d5cf753d
RDX: 0000000020000080 RSI: 0000000040186f40 RDI: 0000000000000003
RBP: 0000000000400cd0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000400be0
R13: 00007fffd72207e0 R14: 0000000000000000 R15: 0000000000000000
  </TASK>

Allocated by task 1555:
  kasan_save_stack+0x20/0x3d mm/kasan/common.c:38
  kasan_set_track mm/kasan/common.c:45 [inline]
  set_alloc_info mm/kasan/common.c:437 [inline]
  ____kasan_kmalloc mm/kasan/common.c:516 [inline]
  __kasan_kmalloc+0x88/0xa3 mm/kasan/common.c:525
  kasan_kmalloc include/linux/kasan.h:234 [inline]
  __kmalloc+0x138/0x257 mm/slub.c:4429
  kmalloc include/linux/slab.h:605 [inline]
  ubi_alloc_vid_buf drivers/mtd/ubi/ubi.h:1093 [inline]
  create_vtbl+0xcc/0x9c4 drivers/mtd/ubi/vtbl.c:295
  create_empty_lvol drivers/mtd/ubi/vtbl.c:500 [inline]
  ubi_read_volume_table+0x67b/0x288a drivers/mtd/ubi/vtbl.c:812
  ubi_attach+0xf34/0x1603 drivers/mtd/ubi/attach.c:1601
  ubi_attach_mtd_dev+0x6f3/0x185e drivers/mtd/ubi/build.c:965
  ctrl_cdev_ioctl+0x2db/0x347 drivers/mtd/ubi/cdev.c:1043
  vfs_ioctl fs/ioctl.c:51 [inline]
  __do_sys_ioctl fs/ioctl.c:870 [inline]
  __se_sys_ioctl fs/ioctl.c:856 [inline]
  __x64_sys_ioctl+0x193/0x213 fs/ioctl.c:856
  do_syscall_x64 arch/x86/entry/common.c:50 [inline]
  do_syscall_64+0x3e/0x86 arch/x86/entry/common.c:80
  entry_SYSCALL_64_after_hwframe+0x63/0x0

The buggy address belongs to the object at ffff88802bb36e00
  which belongs to the cache kmalloc-256 of size 256
The buggy address is located 0 bytes to the right of
  256-byte region [ffff88802bb36e00, ffff88802bb36f00)

The buggy address belongs to the physical page:
page:00000000ea4d1263 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0 pfn:0x2bb36
head:00000000ea4d1263 order:1 compound_mapcount:0 compound_pincount:0
flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0010200 ffffea000066c300 dead000000000003 ffff888100042b40
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff88802bb36e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ffff88802bb36e80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff88802bb36f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                    ^
  ffff88802bb36f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffff88802bb37000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Fixes: 801c135c ("UBI: Unsorted Block Images")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Bug description and fix:

1. Write data to a file, say all 1s from offset 0 to 16.

2. Truncate the file to a smaller size, say 8 bytes.

3. Write new bytes (say 2s) from an offset past the original size of the
file, say at offset 20, for 4 bytes.  This is supposed to create a "hole"
in the file, meaning that the bytes from offset 8 (where it was truncated
above) up to the new write at offset 20, should all be 0s (zeros).

4. Flush all caches using "echo 3 > /proc/sys/vm/drop_caches" (or unmount
and remount) the f/s.

5. Check the content of the file.  It is wrong.  The 1s that used to be
between bytes 9 and 16, before the truncation, have REAPPEARED (they should
be 0s).

We wrote a script and helper C program to reproduce the bug
(reproduce_jffs2_write_begin_issue.sh, write_file.c, and Makefile).  We can
make them available to anyone.

The above example is shown when writing a small file within the same first
page.  But the bug happens for larger files, as long as steps 1, 2, and 3
above all happen within the same page.

The problem was traced to the jffs2_write_begin code, where it goes into an
'if' statement intended to handle writes past the current EOF (i.e., writes
that may create a hole).  The code computes a 'pageofs' that is the floor
of the write position (pos), aligned to the page size boundary.  In other
words, 'pageofs' will never be larger than 'pos'.  The code then sets the
internal jffs2_raw_inode->isize to the size of max(current inode size,
pageofs) but that is wrong: the new file size should be the 'pos', which is
larger than both the current inode size and pageofs.

Similarly, the code incorrectly sets the internal jffs2_raw_inode->dsize to
the difference between the pageofs minus current inode size; instead it
should be the current pos minus the current inode size.  Finally,
inode->i_size was also set incorrectly.

The patch below fixes this bug.  The bug was discovered using a new tool
for finding f/s bugs using model checking, called MCFS (Model Checking File
Systems).
Signed-off-by: Yifei Liu <yifeliu@cs.stonybrook.edu>
Signed-off-by: Erez Zadok <ezk@cs.stonybrook.edu>
Signed-off-by: Manish Adkar <madkar@cs.stonybrook.edu>
Signed-off-by: Richard Weinberger <richard@nod.at>

Pull another io_uring fix from Jens Axboe:
 "Just a single fix for a regression that happened in this release due
  to a poll change. Normally I would've just deferred it to next week,
  but since the original fix got picked up by stable, I think it's
  better to just send this one off separately.

  The issue is around the poll race fix, and how it mistakenly also got
  applied to multishot polling. Those don't need the race fix, and we
  should not be doing any reissues for that case. Exhaustive test cases
  were written and committed to the liburing regression suite for the
  reported issue, and additions for similar issues"

* tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux:
  io_uring/poll: don't reissue in case of poll race on multishot request

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc and other subsystem driver fixes for
  6.2-rc5 to resolve a few reported issues. They include:

   - long time pending fastrpc fixes (should have gone into 6.1, my
     fault)

   - mei driver/bus fixes and new device ids

   - interconnect driver fixes for reported problems

   - vmci bugfix

   - w1 driver bugfixes for reported problems

  Almost all of these have been in linux-next with no reported problems,
  the rest have all passed 0-day bot testing in my tree and on the
  mailing lists where they have sat too long due to me taking a long
  time to catch up on my pending patch queue"

* tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  VMCI: Use threaded irqs instead of tasklets
  misc: fastrpc: Pass bitfield into qcom_scm_assign_mem
  gsmi: fix null-deref in gsmi_get_variable
  misc: fastrpc: Fix use-after-free race condition for maps
  misc: fastrpc: Don't remove map on creater_process and device_release
  misc: fastrpc: Fix use-after-free and race in fastrpc_map_find
  misc: fastrpc: fix error code in fastrpc_req_mmap()
  mei: me: add meteor lake point M DID
  mei: bus: fix unlink on bus in error path
  w1: fix WARNING after calling w1_process()
  w1: fix deadloop in __w1_remove_master_device()
  comedi: adv_pci1760: Fix PWM instruction handling
  interconnect: qcom: rpm: Use _optional func for provider clocks
  interconnect: qcom: msm8996: Fix regmap max_register values
  interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
  dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC

Pull driver core fixes from Greg KH:
 "Here are three small driver and kernel core fixes for 6.2-rc5. They
  include:

   - potential gadget fixup in do_prlimit

   - device property refcount leak fix

   - test_async_probe bugfix for reported problem"

* tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  prlimit: do_prlimit needs to have a speculation check
  driver core: Fix test_async_probe_init saves device in wrong array
  device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()

Pull staging driver fix from Greg KH:
 "Here is a single staging driver fix for 6.2-rc5. It resolves a build
  issue reported and Fixed by Arnd in the vc04_services driver. It's
  been in linux-next this week with no reported problems"

* tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vchiq_arm: fix enum vchiq_status return types

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.2-rc5 that
  resolve a number of tiny reported issues and some new device ids. They
  include:

   - new device id for the exar serial driver

   - speakup tty driver bugfix

   - atmel serial driver baudrate fixup

   - stm32 serial driver bugfix and then revert as the bugfix broke the
     build. That will come back in a later pull request once it is all
     worked out properly.

   - amba-pl011 serial driver rs486 mode bugfix

   - qcom_geni serial driver bugfix

  Most of these have been in linux-next with no reported problems (well,
  other than the build breakage which generated the revert), the new
  device id passed 0-day testing"

* tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: exar: Add support for Sealevel 7xxxC serial cards
  Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler"
  tty: serial: qcom_geni: avoid duplicate struct member init
  serial: atmel: fix incorrect baudrate setup
  tty: fix possible null-ptr-defer in spk_ttyio_release
  serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  serial: amba-pl011: fix high priority character transmission in rs486 mode
  serial: pch_uart: Pass correct sg to dma_unmap_sg()
  tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are a number of small USB and Thunderbolt driver fixes and new
  device id changes for 6.2-rc5. Included in here are:

   - thunderbolt bugfixes for reported problems

   - new usb-serial driver ids added

   - onboard_hub usb driver fixes for much-reported problems

   - xhci bugfixes

   - typec bugfixes

   - ehci-fsl driver module alias fix

   - iowarrior header size fix

   - usb gadget driver fixes

  All of these, except for the iowarrior fix, have been in linux-next
  with no reported issues. The iowarrior fix passed the 0-day testing
  and is a one digit change based on a reported problem in the driver
  (which was written to a spec, not the real device that is now
  available)"

* tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
  USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100
  usb: host: ehci-fsl: Fix module alias
  usb: dwc3: fix extcon dependency
  usb: core: hub: disable autosuspend for TI TUSB8041
  USB: fix misleading usb_set_intfdata() kernel doc
  usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()
  USB: gadget: Add ID numbers to configfs-gadget driver names
  usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail
  usb: gadget: g_webcam: Send color matching descriptor per frame
  usb: typec: altmodes/displayport: Use proper macro for pin assignment check
  usb: typec: altmodes/displayport: Fix pin assignment calculation
  usb: typec: altmodes/displayport: Add pin assignment helper
  usb: gadget: f_fs: Ensure ep0req is dequeued before free_request
  usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
  usb: misc: onboard_hub: Move 'attach' work to the driver
  usb: misc: onboard_hub: Invert driver registration order
  usb: ucsi: Ensure connector delayed work items are flushed
  usb: musb: fix error return code in omap2430_probe()
  usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)
  xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables
  ...

Merge tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error
   messages when GNU Make 4.4 is used.

 - Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y.

 - Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile.

 - Support GNU Make 4.4 for scripts/jobserver-exec.

 - Show clearer error message when kernel/gen_kheaders.sh fails due to
   missing cpio.

* tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kheaders: explicitly validate existence of cpio command
  scripts: support GNU make 4.4 in jobserver-exec
  kconfig: Update all declared targets
  scripts: rpm: make clear that mkspec script contains 4.13 feature
  init/Kconfig: fix LOCALVERSION_AUTO help text
  kbuild: fix 'make modules' error when CONFIG_DEBUG_INFO_BTF_MODULES=y
  kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux
  init/version-timestamp.c: remove unneeded #include <linux/version.h>
  docs: kbuild: remove mention to dropped $(objtree) feature

We potentially have old hashes of the xattr names generated on systems
with signed 'char' types.  Now that everybody uses '-funsigned-char',
those hashes will no longer match.

This only happens if you use xattrs names that have the high bit set,
which probably doesn't happen in practice, but the xfstest generic/454
shows it.

Instead of adding a new "signed xattr hash filesystem" bit and having to
deal with all the possible combinations, just calculate the hash both
ways if the first one fails, and always generate new hashes with the
proper unsigned char version.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202212291509.704a11c9-oliver.sang@intel.com
Link: https://lore.kernel.org/all/CAHk-=whUNjwqZXa-MH9KMmc_CpQpoFKFjAB9ZKHuu=TbsouT4A@mail.gmail.com/
Exposed-by: 3bc753c0 ("kbuild: treat char as always unsigned")
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Theodore Ts'o <tytso@mit.edu>,
Cc: Jason Donenfeld <Jason@zx2c4.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

do_prlimit() adds the user-controlled resource value to a pointer that
will subsequently be dereferenced.  In order to help prevent this
codepath from being used as a spectre "gadget" a barrier needs to be
added after checking the range.
Reported-by: Jordy Zomer <jordyzomer@google.com>
Tested-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull gpio fixes from Bartosz Golaszewski:

 - fix a potential race condition and always set GPIOs used as interrupt
   source to input in gpio-mxc

 - fix a GPIO ACPI-related issue with system suspend on Clevo NL5xRU

* tag 'gpio-fixes-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRU
  gpiolib: acpi: Allow ignoring wake capability on pins that aren't in _AEI
  gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode
  gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock

Pull cifs fixes from Steve French:

 - important fix for packet signature calculation error

 - three fixes to correct DFS deadlock, and DFS refresh problem

 - remove an unused DFS function, and duplicate tcon refresh code

 - DFS cache lookup fix

 - uninitialized rc fix

* tag '6.2-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: remove unused function
  cifs: do not include page data when checking signature
  cifs: fix return of uninitialized rc in dfs_cache_update_tgthint()
  cifs: handle cache lookup errors different than -ENOENT
  cifs: remove duplicate code in __refresh_tcon()
  cifs: don't take exclusive lock for updating target hints
  cifs: avoid re-lookups in dfs_cache_find()
  cifs: fix potential deadlock in cache_refresh_path()

Pull pin control fixes from Linus Walleij:

 - Compilation fix for Sunplus sp7021

 - Add some missing headers after a cleanup to the Nomadik driver

 - Fix pull type and mux routes on Rockchip RK3568

* tag 'pinctrl-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: rockchip: fix mux route data for rk3568
  pinctrl: rockchip: fix reading pull type on rk3568
  pinctrl: nomadik: Add missing header(s)
  pinctrl: sp7021: fix unused function warning

Pull rdma fixes from Jason Gunthorpe:

 - Several hfi1 patches fixing some long standing driver bugs

 - Overflow when working with sg lists with elements greater than 4G

 - An rxe regression with object numbering after the mrs reach their
   limit

 - A theoretical problem with the scatterlist merging code

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  lib/scatterlist: Fix to calculate the last_pg properly
  IB/hfi1: Remove user expected buffer invalidate race
  IB/hfi1: Immediately remove invalid memory from hardware
  IB/hfi1: Fix expected receive setup error exit issues
  IB/hfi1: Reserve user expected TIDs
  IB/hfi1: Reject a zero-length user expected buffer
  RDMA/core: Fix ib block iterator counter overflow
  RDMA/rxe: Prevent faulty rkey generation
  RDMA/rxe: Fix inaccurate constants in rxe_type_info

A previous commit fixed a poll race that can occur, but it's only
applicable for multishot requests. For a multishot request, we can safely
ignore a spurious wakeup, as we never leave the waitqueue to begin with.

A blunt reissue of a multishot armed request can cause us to leak a
buffer, if they are ring provided. While this seems like a bug in itself,
it's not really defined behavior to reissue a multishot request directly.
It's less efficient to do so as well, and not required to rearm anything
like it is for singleshot poll requests.

Cc: stable@vger.kernel.org
Fixes: 6e5aedb9 ("io_uring/poll: attempt request issue after racy poll wakeup")
Reported-and-tested-by: Olivier Langlois <olivier@trillion01.com>
Link: https://github.com/axboe/liburing/issues/778Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull block fixes from Jens Axboe:
 "Various little tweaks all over the place:

   - NVMe pull request via Christoph:
       - fix controller shutdown regression in nvme-apple (Janne Grunau)
       - fix a polling on timeout regression in nvme-pci (Keith Busch)

   - Fix a bug in the read request side request allocation caching
     (Pavel)

   - pktcdvd was brought back after we configured a NULL return on bio
     splits, make it consistent with the others (me)

   - BFQ refcount fix (Yu)

   - Block cgroup policy activation fix (Yu)

   - Fix for an md regression introduced in the 6.2 cycle (Adrian)"

* tag 'block-6.2-2023-01-20' of git://git.kernel.dk/linux:
  nvme-pci: fix timeout request state check
  nvme-apple: only reset the controller when RTKit is running
  nvme-apple: reset controller during shutdown
  block: fix hctx checks for batch allocation
  block/rnbd-clt: fix wrong max ID in ida_alloc_max
  blk-cgroup: fix missing pd_online_fn() while activating policy
  pktcdvd: check for NULL returna fter calling bio_split_to_limits()
  block, bfq: switch 'bfqg->ref' to use atomic refcount apis
  md: fix incorrect declaration about claim_rdev in md_import_device

Pull io_uring fixes from Jens Axboe:
 "Fixes for the MSG_RING opcode. Nothing really major:

   - Fix an overflow missing serialization around posting CQEs to the
     target ring (me)

   - Disable MSG_RING on a ring that isn't enabled yet. There's nothing
     really wrong with allowing it, but 1) it's somewhat odd as nobody
     can receive them yet, and 2) it means that using the right delivery
     mechanism might change. As nobody should be sending CQEs to a ring
     that isn't enabled yet, let's just disable it (Pavel)

   - Tweak to when we decide to post remotely or not for MSG_RING
     (Pavel)"

* tag 'io_uring-6.2-2023-01-20' of git://git.kernel.dk/linux:
  io_uring/msg_ring: fix remote queue to disabled ring
  io_uring/msg_ring: fix flagging remote execution
  io_uring/msg_ring: fix missing lock on overflow for IOPOLL
  io_uring/msg_ring: move double lock/unlock helpers higher up

Pull btrfs fixes from David Sterba:

 - fix potential out-of-bounds access to leaf data when seeking in an
   inline file

 - fix potential crash in quota when rescan races with disable

 - reimplement super block signature scratching by marking page/folio
   dirty and syncing block device, allow removing write_one_page

* tag 'for-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix race between quota rescan and disable leading to NULL pointer deref
  btrfs: fix invalid leaf access due to inline extent during lseek
  btrfs: stop using write_one_page in btrfs_scratch_superblock
  btrfs: factor out scratching of one regular super block