- 10 Dec, 2019 3 commits
-
-
Neil Armstrong authored
The Amlogic VPU embeds a "Register DMA" that can write a sequence of registers on the VPU AHB bus, either manually or triggered by an internal IRQ event like VSYNC or a line input counter. This adds the register defines. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-3-narmstrong@baylibre.com
-
Neil Armstrong authored
Add the registers used to program the ARM Framebuffer Compression decoders used in the Amlogic GXM and G12A SoCs families. This also adds the routing and pipeline configuration bits and registers needed to enable AFBC support. Signed-off-by:
-
Jani Nikula authored
Now that the fbops member of struct fb_info is const, we can start making the ops const as well. v2: fix typo (Christophe de Dinechin) Cc: Kirti Wankhede <kwankhede@nvidia.com> Cc: kvm@vger.kernel.org Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
Kirti Wankhede <kwankhede@nvidia.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ddb10df1316ef585930cda7718643a580f4fe37b.1575390741.git.jani.nikula@intel.com
-
- 09 Dec, 2019 34 commits
-
-
Sam Ravnborg authored
Use the backlight support in drm_panel to simplify the driver Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-26-sam@ravnborg.org
-
Sam Ravnborg authored
Use the backlight support in drm_panel to simplify the driver Signed-off-by:
-
Sam Ravnborg authored
Use the backlight support in drm_panel to simplify the driver Signed-off-by:
-
Sam Ravnborg authored
Use the backlight support in drm_panel to simplify the driver Signed-off-by:
-
Sam Ravnborg authored
Use the backlight support in drm_panel to simplify the driver Signed-off-by:
-
Sam Ravnborg authored
Use the backlight support in drm_panel to simplify the driver Signed-off-by:
-
Sam Ravnborg authored
Use the backlight support in drm_panel to simplify the driver Signed-off-by:
-
Sam Ravnborg authored
Use the backlight support in drm_panel to simplify the driver Signed-off-by:
-
Sam Ravnborg authored
Use the backlight support in drm_panel to simplify the driver. While touching the include files sort them and divide them up in blocks. Signed-off-by:
Guido Günther <agx@sigxcpu.org> Reviewed-by:
-
Sam Ravnborg authored
Use the backlight support in drm_panel to simplify the driver Signed-off-by:
-
Sam Ravnborg authored
Use the backlight support in drm_panel to simplify the driver Signed-off-by:
-
Sam Ravnborg authored
Use the backlight support in drm_panel to simplify the driver Signed-off-by:
-
Sam Ravnborg authored
Use the backlight support in drm_panel to simplify the driver Signed-off-by:
-
Sam Ravnborg authored
Use the backlight support in drm_panel to simplify the driver Signed-off-by:
-
Sam Ravnborg authored
Use the backlight support in drm_panel to simplify the driver Signed-off-by:
-
Sam Ravnborg authored
Use the backlight support in drm_panel to simplify the driver Signed-off-by:
-
Sam Ravnborg authored
Use the backlight support in drm_panel to simplify the driver Signed-off-by:
-
Sam Ravnborg authored
Use the backlight support in drm_panel to simplify the driver Signed-off-by:
-
Sam Ravnborg authored
The panel drivers used drm_panel.drm for two purposes: 1) Argument to drm_mode_duplicate() 2) drm->dev was used in error messages The first usage is replaced with drm_connector.dev - drm_connector is already connected to a drm_device and we have a valid connector The second usage is replaced with drm_panel.dev - this makes drivers more consistent in their dev argument used for dev_err() and friends With these replacements there are no more uses of drm_panel.drm, so it is removed from struct drm_panel. With this change drm_panel_attach() and drm_panel_detach() no longer have any use as they are empty functions. v2: - editorial correction in changelog (Laurent) Signed-off-by:
-
Sam Ravnborg authored
To facilitate moving connector creation to display drivers, decouple the drm_connector from drm_panel. This patch adds a connector argument to drm_panel_get_modes(). All users of drm_panel_get_modes() already had the connector available, so updating users was trivial. With this patch drm_panel no longer keeps a reference to the drm_connector. Signed-off-by:
Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@nxp.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: CK Hu <ck.hu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Torsten Duwe <duwe@lst.de> Cc: Vasily Khoruzhick <anarsoul@gmail.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Sean Paul <seanpaul@chromium.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Hariprasad Kelam <hariprasad.kelam@gmail.com> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Brian Masney <masneyb@onstation.org> Cc: Rob Clark <robdclark@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Allison Randal <allison@lohutok.net> Cc: Shayenne Moura <shayenneluzmoura@gmail.com> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-7-sam@ravnborg.org
-
Sam Ravnborg authored
Today the bridge creates the drm_connector, but that is planned to be moved to the display drivers. To facilitate this, update drm_panel_funcs.get_modes() to take drm_connector as an argument. All panel drivers implementing get_modes() are updated. v2: - drop accidental change (Laurent) - update docs for get_modes (Laurent) Signed-off-by:
-
Sam Ravnborg authored
The drm_connector created by drm_panel_bridge was accessed via drm_panel.connector. Avoid the detour around drm_panel by providing a simple get method. This avoids direct access to the connector field in drm_panel in the two users. The change is done in preparation for removal of drm_panel.connector. Update pl111 and tve200 to use the new helper. Signed-off-by:
-
Sam Ravnborg authored
Use drm_panel infrastructure for backlight. Replace direct calls with drm_panel_*() calls to utilize the drm_panel support. Signed-off-by:
-
Sam Ravnborg authored
Panels often support backlight as specified in a device tree. Update the drm_panel infrastructure to support this to simplify the drivers. With this the panel driver just needs to add the following to the probe() function: err = drm_panel_of_backlight(panel); if (err) return err; Then drm_panel will handle all the rest. There is one caveat with the backlight support. If drm_panel_(enable|disable) are called multiple times in a row then backlight_(enable|disable) will be called multiple times. The above will happen when a panel drivers unconditionally calls drm_panel_disable() in their shutdown() function, whan the panel is already disabled and then shutdown() is called. Reading the backlight code it seems safe to call the backlight_(enable|disable) several times. v3: - Improve comments, fix grammar (Laurent) - Do not fail in drm_panel_of_backlight() if no DT support (Laurent) - Log if backlight_(enable|disable) fails (Laurent) - Improve drm_panel_of_backlight() docs - Updated changelog with backlight analysis (triggered by Laurent) v2: - Drop test of CONFIG_DRM_PANEL in header-file (Laurent) - do not enable backlight if ->enable() returns an error Signed-off-by: -
Sam Ravnborg authored
The callbacks in drm_panel_funcs are optional, so do not return an error just because no callback is assigned. v2: - Document what functions in drm_panel_funcs are optional (Laurent) - Return -EOPNOTSUPP if get_modes() is not assigned (Laurent) (Sam: -EOPNOTSUPP seems to best error code in this situation) Signed-off-by:
-
Chuhong Yuan authored
oaktrail_lvds_mode_set() misses a gma_power_end() in an error path. Add the call to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191209085747.16057-1-hslester96@gmail.com
-
Jani Nikula authored
Now that the fbops member of struct fb_info is const, we can start making the ops const as well. v2: fix typo (Christophe de Dinechin) Cc: Bruno Prémont <bonbons@linux-vserver.org> Cc: linux-input@vger.kernel.org Reviewed-by:
Bruno Prémont <bonbons@linux-vserver.org> Acked-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Boris Brezillon authored
The [pre_]enable/[post_]disable hooks are passed the old atomic state. Update the doc and rename the arguments to make it clear. Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
-
Boris Brezillon authored
The drm_bridge_get_prev_bridge() helper will be useful for bridge drivers that want to do bus format negotiation with their neighbours. Signed-off-by:
-
Boris Brezillon authored
To iterate over all bridges attached to a specific encoder. Suggested-by:
-
Boris Brezillon authored
So that each element in the chain can easily access its predecessor. This will be needed to support bus format negotiation between elements of the bridge chain. Signed-off-by:
-
Boris Brezillon authored
We are about to replace the single-linked bridge list by a double-linked one based on list.h, leading to the suppression of the encoder->bridge field. But before we can do that we must provide a drm_bridge_chain_get_first_bridge() bridge helper and patch all drivers and core helpers to use it instead of directly accessing encoder->bridge. Note that we still have 2 drivers (VC4 and Exynos) manipulating the encoder->bridge field directly because they need to cut the bridge chain in order to control the enable/disable sequence. This is definitely not something we want to encourage, so let's keep those 2 oddities around until we find a better solution. Signed-off-by:
-
Boris Brezillon authored
And use it in drivers accessing the bridge->next field directly. This is part of our attempt to make the bridge chain a double-linked list based on the generic list helpers. Signed-off-by:
-
Boris Brezillon authored
Change the prefix of bridge helpers targeting a bridge chain from drm_bridge_ to drm_bridge_chain_ to better reflect the fact that the operation will happen on all elements of chain, starting at the bridge passed in argument. Signed-off-by:
-
- 06 Dec, 2019 3 commits
-
-
Wayne Lin authored
[Why] This patch is trying to address the issue observed when hotplug DP daisy chain monitors. e.g. src-mstb-mstb-sst -> src (unplug) mstb-mstb-sst -> src-mstb-mstb-sst (plug in again) Once unplug a DP MST capable device, driver will call drm_dp_mst_topology_mgr_set_mst() to disable MST. In this function, it cleans data of topology manager while disabling mst_state. However, it doesn't clean up the proposed_vcpis of topology manager. If proposed_vcpi is not reset, once plug in MST daisy chain monitors later, code will fail at checking port validation while trying to allocate payloads. When MST capable device is plugged in again and try to allocate payloads by calling drm_dp_update_payload_part1(), this function will iterate over all proposed virtual channels to see if any proposed VCPI's num_slots is greater than 0. If any proposed VCPI's num_slots is greater than 0 and the port which the specific virtual channel directed to is not in the topology, code then fails at the port validation. Since there are stale VCPI allocations from the previous topology enablement in proposed_vcpi[], code will fail at port validation and reurn EINVAL. [How] Clean up the data of stale proposed_vcpi[] and reset mgr->proposed_vcpis to NULL while disabling mst in drm_dp_mst_topology_mgr_set_mst(). Changes since v1: *Add on more details in commit message to describe the issue which the patch is trying to fix Signed-off-by:
Wayne Lin <Wayne.Lin@amd.com> [added cc to stable] Signed-off-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191205090043.7580-1-Wayne.Lin@amd.com Cc: <stable@vger.kernel.org> # v3.17+
-
Robin Murphy authored
When we have devfreq, also try to register a basic cooling device in case GPU workloads manage to hit thermal throttling thresholds. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/21f228099321f460d62e0ab7c77b2d2213dd4da8.1574974319.git.robin.murphy@arm.com
-
Thomas Zimmermann authored
The field lost_pixels in struct udl_device was supposed to signal an error during USB transfers of the framebuffer data. The driver would have to schedule a re-transfer at a later point. This code was never implemented. Remove lost_pixels and return regular error codes instead. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Acked-by:
Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191206085954.9697-8-tzimmermann@suse.de
-
