- 10 Feb, 2022 35 commits
-
-
Sean Christopherson authored
Remove SVM's MAX_INST_SIZE, which has long since been obsoleted by the common MAX_INSN_SIZE. Note, the latter's "insn" is also the generally preferred abbreviation of instruction. No functional change intended. Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20220128005208.4008533-18-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Rename svm_flush_tlb() to svm_flush_tlb_current() so that at least one of the flushing operations in svm_x86_ops can be filled via kvm-x86-ops.h, and to document the scope of the flush (specifically that it doesn't flush "all"). Opportunistically make svm_tlb_flush_current(), was svm_flush_tlb(), static. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Move kvm_get_cs_db_l_bits() to SVM and rename it appropriately so that its svm_x86_ops entry can be filled via kvm-x86-ops, and to eliminate a superfluous export from KVM x86. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Massage VMX's implementation names for kvm_x86_ops to maximize use of kvm-x86-ops.h. Leave cpu_has_vmx_wbinvd_exit() as-is to preserve the cpu_has_vmx_*() pattern used for querying VMCS capabilities. Keep pi_has_pending_interrupt() as vmx_dy_apicv_has_pending_interrupt() does a poor job of describing exactly what is being checked in VMX land. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Define and use static_call()s for .vm_{copy,move}_enc_context_from(), mostly so that the op is defined in kvm-x86-ops.h. This will allow using KVM_X86_OP in vendor code to wire up the implementation. Any performance gains eeked out by using static_call() is a happy bonus and not the primary motiviation. Opportunistically refactor the code to reduce indentation and keep line lengths reasonable, and to be consistent when wrapping versus running a bit over the 80 char soft limit. Signed-off-by: -
Sean Christopherson authored
Drop the export of kvm_x86_ops now it is no longer referenced by SVM or VMX. Disallowing access to kvm_x86_ops is very desirable as it prevents vendor code from incorrectly modifying hooks after they have been set by kvm_arch_hardware_setup(), and more importantly after each function's associated static_call key has been updated. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Uninline and export Hyper-V's hv_track_root_tdp(), which is (somewhat indirectly) the last remaining reference to kvm_x86_ops from vendor modules, i.e. will allow unexporting kvm_x86_ops. Reloading the TDP PGD isn't the fastest of paths, hv_track_root_tdp() isn't exactly tiny, and disallowing vendor code from accessing kvm_x86_ops provides nice-to-have encapsulation of common x86 code (and of Hyper-V code for that matter). No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Refactor the nested VMX PMU refresh helper to pass it a flag stating whether or not the vCPU has PERF_GLOBAL_CTRL instead of having the nVMX helper query the information by bouncing through kvm_x86_ops.pmu_ops. This will allow a future patch to use static_call() for the PMU ops without having to export any static call definitions from common x86, and it is also a step toward unexported kvm_x86_ops. Alternatively, nVMX could call kvm_pmu_is_valid_msr() to indirectly use kvm_x86_ops.pmu_ops, but that would incur an extra layer of indirection and would require exporting kvm_pmu_is_valid_msr(). Opportunistically rename the helper to keep line lengths somewhat reasonable, and to better capture its high-level role. No functional change intended. Cc: Like Xu <like.xu.linux@gmail.com> Signed-off-by:
-
Sean Christopherson authored
Use static_call() for invoking kvm_x86_ops function that already have a defined static call, mostly as a step toward having _all_ calls to kvm_x86_ops route through a static_call() in order to simplify auditing, e.g. via grep, that all functions have an entry in kvm-x86-ops.h, but also because there's no reason not to use a static_call(). Signed-off-by:
-
Sean Christopherson authored
Define and use a static_call() for kvm_x86_ops.vcpu_deliver_sipi_vector(), mostly so that the op is defined in kvm-x86-ops.h. This will allow using KVM_X86_OP in vendor code to wire up the implementation. Any performance gains eeked out by using static_call() is a happy bonus and not the primary motiviation. Signed-off-by:
-
Sean Christopherson authored
Use vmx_get_cpl() instead of bouncing through kvm_x86_ops.get_cpl() when performing a CPL check on MOV DR accesses. This avoids a RETPOLINE (when enabled), and more importantly removes a vendor reference to kvm_x86_ops and helps pave the way for unexporting kvm_x86_ops. Signed-off-by:
-
Sean Christopherson authored
Rename a variety of kvm_x86_op function pointers so that preferred name for vendor implementations follows the pattern <vendor>_<function>, e.g. rename .run() to .vcpu_run() to match {svm,vmx}_vcpu_run(). This will allow vendor implementations to be wired up via the KVM_X86_OP macro. In many cases, VMX and SVM "disagree" on the preferred name, though in reality it's VMX and x86 that disagree as SVM blindly prepended _svm to the kvm_x86_ops name. Justification for using the VMX nomenclature: - set_{irq,nmi} => inject_{irq,nmi} because the helper is injecting an event that has already been "set" in e.g. the vIRR. SVM's relevant VMCB field is even named event_inj, and KVM's stat is irq_injections. - prepare_guest_switch => prepare_switch_to_guest because the former is ambiguous, e.g. it could mean switching between multiple guests, switching from the guest to host, etc... - update_pi_irte => pi_update_irte to allow for matching match the rest of VMX's posted interrupt naming scheme, which is vmx_pi_<blah>(). - start_assignment => pi_start_assignment to again follow VMX's posted interrupt naming scheme, and to provide context for what bit of code might care about an otherwise undescribed "assignment". The "tlb_flush" => "flush_tlb" creates an inconsistency with respect to Hyper-V's "tlb_remote_flush" hooks, but Hyper-V really is the one that's wrong. x86, VMX, and SVM all use flush_tlb, and even common KVM is on a variant of the bandwagon with "kvm_flush_remote_tlbs", e.g. a more appropriate name for the Hyper-V hooks would be flush_remote_tlbs. Leave that change for another time as the Hyper-V hooks always start as NULL, i.e. the name doesn't matter for using kvm-x86-ops.h, and changing all names requires an astounding amount of churn. VMX and SVM function names are intentionally left as is to minimize the diff. Both VMX and SVM will need to rename even more functions in order to fully utilize KVM_X86_OPS, i.e. an additional patch for each is inevitable. No functional change intended. Signed-off-by: -
Sean Christopherson authored
Remove the export of kvm_x86_tlb_flush_current() as there are no longer any users outside of common x86 code. Signed-off-by:
-
Paolo Bonzini authored
Hypervisor leaves are always synthesized by __do_cpuid_func; just return zeroes and do not ask the host. Even on nested virtualization, a value from another hypervisor would be bogus, because all hypercalls and MSRs are processed by KVM. Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Jinrong Liang authored
The "unsigned long flags" parameter of kvm_pv_kick_cpu_op() is not used, so remove it. No functional change intended. Signed-off-by:
Jinrong Liang <cloudliang@tencent.com> Message-Id: <20220125095909.38122-20-cloudliang@tencent.com> Signed-off-by:
-
Jinrong Liang authored
The "struct kvm *kvm" parameter of kvm_make_vcpu_request() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "struct kvm_vcpu *vcpu" parameter of kvm_scale_tsc() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "u16 tss_selector" parameter of task_switch_{16, 32}() is not used, so remove it. No functional change intended. Signed-off-by: -
Jinrong Liang authored
The "struct x86_emulate_ctxt *ctxt" parameter of setup_syscalls_segments() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "unsigned long addr" and "unsigned long length" parameter of ioapic_read_indirect() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "u32 addr" parameter of elcr_ioport_write() and elcr_ioport_read() is not used, so remove it. No functional change intended. Signed-off-by:
-
Paolo Bonzini authored
KVM performs the VMSAVE to the host save area for both regular and SEV-ES guests, so hoist it up to svm_prepare_guest_switch. And because sev_es_prepare_guest_switch does not really need to know the details of struct svm_cpu_data *, just pass it the pointer to the host save area inside the HSAVE page. Signed-off-by: -
Jinrong Liang authored
The "struct kvm_vcpu *vcpu" parameter of svm_check_exit_valid() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "int level" parameter of audit_spte_after_sync() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "struct kvm *kvm" parameter of kvm_tdp_mmu_get_root() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "struct kvm_vcpu *vcpu" parameter of reset_ept_shadow_zero_bits_mask() and reset_tdp_shadow_zero_bits_mask() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "struct kvm *kvm" parameter of __rmap_write_protect() is not used, so remove it. No functional change intended. Signed-off-by:
-
Jinrong Liang authored
The "struct kvm *kvm" parameter of kvm_mmu_unlink_parents() is not used, so remove it. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Bail from the APICv update paths _before_ taking apicv_update_lock if APICv is disabled at the module level. kvm_request_apicv_update() in particular is invoked from multiple paths that can be reached without APICv being enabled, e.g. svm_enable_irq_window(), and taking the rw_sem for write when APICv is disabled may introduce unnecessary contention and stalls. Signed-off-by:
-
Sean Christopherson authored
Drop the useless NULL check on kvm_x86_ops.check_apicv_inhibit_reasons when handling an APICv update, both VMX and SVM unconditionally implement the helper and leave it non-NULL even if APICv is disabled at the module level. The latter is a moot point now that __kvm_request_apicv_update() is called if and only if enable_apicv is true. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Unexport __kvm_request_apicv_update(), it's not used by vendor code and should never be used by vendor code. The only reason it's exposed at all is because Hyper-V's SynIC needs to track how many auto-EOIs are in use, and it's convenient to use apicv_update_lock to guard that tracking. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Zap both valid and invalid roots when zapping/unmapping a gfn range, as KVM must ensure it holds no references to the freed page after returning from the unmap operation. Most notably, the TDP MMU doesn't zap invalid roots in mmu_notifier callbacks. This leads to use-after-free and other issues if the mmu_notifier runs to completion while an invalid root zapper yields as KVM fails to honor the requirement that there must be _no_ references to the page after the mmu_notifier returns. The bug is most easily reproduced by hacking KVM to cause a collision between set_nx_huge_pages() and kvm_mmu_notifier_release(), but the bug exists between kvm_mmu_notifier_invalidate_range_start() and memslot updates as well. Invalidating a root ensures pages aren't accessible by the guest, and KVM won't read or write page data itself, but KVM will trigger e.g. kvm_set_pfn_dirty() when zapping SPTEs, and thus completing a zap of an invalid root _after_ the mmu_notifier returns is fatal. WARNING: CPU: 24 PID: 1496 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:173 [kvm] RIP: 0010:kvm_is_zone_device_pfn+0x96/0xa0 [kvm] Call Trace: <TASK> kvm_set_pfn_dirty+0xa8/0xe0 [kvm] __handle_changed_spte+0x2ab/0x5e0 [kvm] __handle_changed_spte+0x2ab/0x5e0 [kvm] __handle_changed_spte+0x2ab/0x5e0 [kvm] zap_gfn_range+0x1f3/0x310 [kvm] kvm_tdp_mmu_zap_invalidated_roots+0x50/0x90 [kvm] kvm_mmu_zap_all_fast+0x177/0x1a0 [kvm] set_nx_huge_pages+0xb4/0x190 [kvm] param_attr_store+0x70/0x100 module_attr_store+0x19/0x30 kernfs_fop_write_iter+0x119/0x1b0 new_sync_write+0x11c/0x1b0 vfs_write+0x1cc/0x270 ksys_write+0x5f/0xe0 do_syscall_64+0x38/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Fixes: b7cccd39 ("KVM: x86/mmu: Fast invalidation for TDP MMU") Cc: stable@vger.kernel.org Cc: Ben Gardon <bgardon@google.com> Signed-off-by:
-
Sean Christopherson authored
Move the check for an invalid root out of kvm_tdp_mmu_get_root() and into the one place it actually matters, tdp_mmu_next_root(), as the other user already has an implicit validity check. A future bug fix will need to get references to invalid roots to honor mmu_notifier requests; there's no point in forcing what will be a common path to open code getting a reference to a root. No functional change intended. Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Christopherson authored
Use the common TDP MMU zap helper when handling an MMU notifier unmap event, the two flows are semantically identical. Consolidate the code in preparation for a future bug fix, as both kvm_tdp_mmu_unmap_gfn_range() and __kvm_tdp_mmu_zap_gfn_range() are guilty of not zapping SPTEs in invalid roots. No functional change intended. Cc: stable@vger.kernel.org Signed-off-by:
-
David Woodhouse authored
There are circumstances whem kvm_xen_update_runstate_guest() should not sleep because it ends up being called from __schedule() when the vCPU is preempted: [ 222.830825] kvm_xen_update_runstate_guest+0x24/0x100 [ 222.830878] kvm_arch_vcpu_put+0x14c/0x200 [ 222.830920] kvm_sched_out+0x30/0x40 [ 222.830960] __schedule+0x55c/0x9f0 To handle this, make it use the same trick as __kvm_xen_has_interrupt(), of using the hva from the gfn_to_hva_cache directly. Then it can use pagefault_disable() around the accesses and just bail out if the page is absent (which is unlikely). I almost switched to using a gfn_to_pfn_cache here and bailing out if kvm_map_gfn() fails, like kvm_steal_time_set_preempted() does — but on closer inspection it looks like kvm_map_gfn() will *always* fail in atomic context for a page in IOMEM, which means it will silently fail to make the update every single time for such guests, AFAICT. So I didn't do it that way after all. And will probably fix that one too. Cc: stable@vger.kernel.org Fixes: 30b5c851 ("KVM: x86/xen: Add support for vCPU runstate information") Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <b17a93e5ff4561e57b1238e3e7ccd0b613eb827e.camel@infradead.org> Signed-off-by:
-
- 08 Feb, 2022 5 commits
-
-
Maxim Levitsky authored
asm/svm.h is the correct place for all values that are defined in the SVM spec, and that includes AVIC. Also add some values from the spec that were not defined before and will be soon useful. Signed-off-by:
Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220207155447.840194-10-mlevitsk@redhat.com> Signed-off-by:
-
Maxim Levitsky authored
kvm_apic_update_apicv is called when AVIC is still active, thus IRR bits can be set by the CPU after it is called, and don't cause the irr_pending to be set to true. Also logic in avic_kick_target_vcpu doesn't expect a race with this function so to make it simple, just keep irr_pending set to true and let the next interrupt injection to the guest clear it. Signed-off-by:
-
Maxim Levitsky authored
Fix a corner case in which the L1 hypervisor intercepts interrupts (INTERCEPT_INTR) and either doesn't set virtual interrupt masking (V_INTR_MASKING) or enters a nested guest with EFLAGS.IF disabled prior to the entry. In this case, despite the fact that L1 intercepts the interrupts, KVM still needs to set up an interrupt window to wait before injecting the INTR vmexit. Currently the KVM instead enters an endless loop of 'req_immediate_exit'. Exactly the same issue also happens for SMIs and NMI. Fix this as well. Note that on VMX, this case is impossible as there is only 'vmexit on external interrupts' execution control which either set, in which case both host and guest's EFLAGS.IF are ignored, or not set, in which case no VMexits are delivered. Signed-off-by:
-
Maxim Levitsky authored
KVM already honours few clean bits thus it makes sense to let the nested guest know about it. Note that KVM also doesn't check if the hardware supports clean bits, and therefore nested KVM was already setting clean bits and L0 KVM was already honouring them. Signed-off-by:
-
Maxim Levitsky authored
While RSM induced VM entries are not full VM entries, they still need to be followed by actual VM entry to complete it, unlike setting the nested state. This patch fixes boot of hyperv and SMM enabled windows VM running nested on KVM, which fail due to this issue combined with lack of dirty bit setting. Signed-off-by:
-
