- 05 Nov, 2014 34 commits
-
-
Dirk Brandewie authored
commit b27580b0 upstream. BYT has a different conversion from P state to frequency than the core processors. This causes the min/max and current frequency to be misreported on some BYT SKUs. Tested on BYT N2820, Ivybridge and Haswell processors. Link: https://bugzilla.yoctoproject.org/show_bug.cgi?id=6663Signed-off-by:
Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Dirk Brandewie authored
commit c0348717 upstream. The user may have custom settings don't destroy them during suspend. Link: https://bugzilla.kernel.org/show_bug.cgi?id=80651Reported-by:
Tobias Jakobi <liquid.acid@gmx.net> Signed-off-by:
-
Gabriele Mazzotta authored
commit 4521e1a0 upstream. Some BIOSes modify the state of MSR_IA32_MISC_ENABLE_TURBO_DISABLE based on the current power source for the system battery AC vs battery. Reflect the correct current state and ability to modify the no_turbo sysfs file based on current state of MSR_IA32_MISC_ENABLE_TURBO_DISABLE. Link: https://bugzilla.kernel.org/show_bug.cgi?id=83151Signed-off-by:
Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by:
-
Dirk Brandewie authored
commit c034b02e upstream. Currently the core does not expose scaling_cur_freq for set_policy() drivers this breaks some userspace monitoring tools. Change the core to expose this file for all drivers and if the set_policy() driver supports the get() callback use it to retrieve the current frequency. Link: https://bugzilla.kernel.org/show_bug.cgi?id=73741Signed-off-by:
-
Pali Rohár authored
commit 36b4bed5 upstream. Code which changes policy to powersave changes also max_policy_pct based on max_freq. Code which change max_perf_pct has upper limit base on value max_policy_pct. When policy is changing from powersave back to performance then max_policy_pct is not changed. Which means that changing max_perf_pct is not possible to high values if max_freq was too low in powersave policy. Test case: $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq 800000 $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 3300000 $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor performance $ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct 100 $ echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor $ echo 800000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq $ echo 20 > /sys/devices/system/cpu/intel_pstate/max_perf_pct $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor powersave $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 800000 $ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct 20 $ echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor $ echo 3300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq $ echo 100 > /sys/devices/system/cpu/intel_pstate/max_perf_pct $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor performance $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 3300000 $ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct 24 And now intel_pstate driver allows to set maximal value for max_perf_pct based on max_policy_pct which is 24 for previous powersave max_freq 800000. This patch will set default value for max_policy_pct when setting policy to performance so it will allow to set also max value for max_perf_pct. Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Acked-by:
-
Olaf Hering authored
commit c0c3e735 upstream. qemu as used by xend/xm toolstack uses a different subvendor id. Bind the drm driver also to this emulated card. Signed-off-by:
Olaf Hering <olaf@aepfle.de> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
David Daney authored
commit 9e0f162a upstream. In commit 8393c524 (MIPS: tlbex: Fix a missing statement for HUGETLB), the TLB Refill handler was fixed so that non-OCTEON targets would work properly with huge pages. The change was incorrect in that it broke the OCTEON case. The problem is shown here: xxx0: df7a0000 ld k0,0(k1) . . . xxxc0: df610000 ld at,0(k1) xxxc4: 335a0ff0 andi k0,k0,0xff0 xxxc8: e825ffcd bbit1 at,0x5,0x0 xxxcc: 003ad82d daddu k1,at,k0 . . . In the non-octeon case there is a destructive test for the huge PTE bit, and then at 0, $k0 is reloaded (that is what the 8393c524 patch added). In the octeon case, we modify k1 in the branch delay slot, but we never need k0 again, so the new load is not needed, but since k1 is modified, if we do the load, we load from a garbage location and then get a nested TLB Refill, which is seen in userspace as either SIGBUS or SIGSEGV (depending on the garbage). The real fix is to only do this reloading if it is needed, and never where it is harmful. Signed-off-by:
David Daney <david.daney@cavium.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8151/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Aaro Koskinen authored
commit aa08ed55 upstream. During 3.16 merge window, parts of the commit 8e8acb32 (MIPS/loongson2_cpufreq: Fix CPU clock rate setting) seem to have been deleted probably due to a mismerge, and as a result cpufreq is broken again on Loongson2 boards in 3.16 and newer kernels. Fix by repeating the fix. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7835/Signed-off-by:
-
Marc-André Lureau authored
commit c572aaf4 upstream. Limit primary to qemu vgamem size, to avoid reaching qemu guest bug "requested primary larger than framebuffer" on resizing screen too large to fit. Remove unneeded and misleading variables. Related to: https://bugzilla.redhat.com/show_bug.cgi?id=1127552Signed-off-by:
Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by:
-
Michal Hocko authored
commit 5695be14 upstream. PM freezer relies on having all tasks frozen by the time devices are getting frozen so that no task will touch them while they are getting frozen. But OOM killer is allowed to kill an already frozen task in order to handle OOM situtation. In order to protect from late wake ups OOM killer is disabled after all tasks are frozen. This, however, still keeps a window open when a killed task didn't manage to die by the time freeze_processes finishes. Reduce the race window by checking all tasks after OOM killer has been disabled. This is still not race free completely unfortunately because oom_killer_disable cannot stop an already ongoing OOM killer so a task might still wake up from the fridge and get killed without freeze_processes noticing. Full synchronization of OOM and freezer is, however, too heavy weight for this highly unlikely case. Introduce and check oom_kills counter which gets incremented early when the allocator enters __alloc_pages_may_oom path and only check all the tasks if the counter changes during the freezing attempt. The counter is updated so early to reduce the race window since allocator checked oom_killer_disabled which is set by PM-freezing code. A false positive will push the PM-freezer into a slow path but that is not a big deal. Changes since v1 - push the re-check loop out of freeze_processes into check_frozen_processes and invert the condition to make the code more readable as per Rafael Fixes: f660daac (oom: thaw threads if oom killed thread is frozen before deferring) Signed-off-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Cong Wang authored
commit 51fae6da upstream. Since f660daac (oom: thaw threads if oom killed thread is frozen before deferring) OOM killer relies on being able to thaw a frozen task to handle OOM situation but a3201227 (freezer: make freezing() test freeze conditions in effect instead of TIF_FREEZE) has reorganized the code and stopped clearing freeze flag in __thaw_task. This means that the target task only wakes up and goes into the fridge again because the freezing condition hasn't changed for it. This reintroduces the bug fixed by f660daac. Fix the issue by checking for TIF_MEMDIE thread flag in freezing_slow_path and exclude the task from freezing completely. If a task was already frozen it would get woken by __thaw_task from OOM killer and get out of freezer after rechecking freezing(). Changes since v1 - put TIF_MEMDIE check into freezing_slowpath rather than in __refrigerator as per Oleg - return __thaw_task into oom_scan_process_thread because oom_kill_process will not wake task in the fridge because it is sleeping uninterruptible [mhocko@suse.cz: rewrote the changelog] Fixes: a3201227 (freezer: make freezing() test freeze conditions in effect instead of TIF_FREEZE) Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Markos Chandras authored
commit a5466d7b upstream. Commit 08a07904 ("MIPS: math-emu: Remove most ifdefery") removed the #ifdef ISA conditions and switched to runtime detection. However, according to the instruction set manual, the cop1x_op instructions are available in >=MIPS32r2 as well. This fixes a problem on MIPS32r2 with the ntpd package which failed to execute with a SIGILL exit code due to the fact that a madd.d instruction was not being emulated. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Fixes: 08a07904 ("MIPS: math-emu: Remove most ifdefery") Cc: linux-mips@linux-mips.org Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/8173/Signed-off-by:
-
Daniel Borkmann authored
commit d4c5efdb upstream. zatimend has reported that in his environment (3.16/gcc4.8.3/corei7) memset() calls which clear out sensitive data in extract_{buf,entropy, entropy_user}() in random driver are being optimized away by gcc. Add a helper memzero_explicit() (similarly as explicit_bzero() variants) that can be used in such cases where a variable with sensitive data is being cleared out in the end. Other use cases might also be in crypto code. [ I have put this into lib/string.c though, as it's always built-in and doesn't need any dependencies then. ] Fixes kernel bugzilla: 82041 Reported-by: zatimend@hotmail.co.uk Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> [ kamal: backport to 3.13-stable: one more memzero_explicit in extract_buf() ] Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
-
Alex Deucher authored
commit adfed2b0 upstream. Avoids HDP cache flush issues when using vram which can cause ring test failures on certain boards. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: Alexander Fyodorov <halcy@yandex.ru> Signed-off-by:
-
Alex Deucher authored
commit 49104038 upstream. If the sad_count is 0, set the hw to stereo and change the error message to a warn. A lot of monitors don't set the speaker allocation block. Signed-off-by:
-
Darrick J. Wong authored
commit 813d32f9 upstream. Convert the ext4_has_group_desc_csum predicate to look for a checksum driver instead of the metadata_csum flag and change the bg checksum calculation function to look for GDT_CSUM before taking the crc16 path. Without this patch, if we mount with ^uninit_bg,^metadata_csum and later metadata_csum gets turned on by accident, the block group checksum functions will incorrectly assume that checksumming is enabled (metadata_csum) but that crc16 should be used (!s_chksum_driver). This is totally wrong, so fix the predicate and the checksum formula selection. (Granted, if the metadata_csum feature bit gets enabled on a live FS then something underhanded is going on, but we could at least avoid writing garbage into the on-disk fields.) Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
-
Vineet Gupta authored
commit 52e9bae9 upstream. Fixes: 2ab402df "ARC: make start_thread() out-of-line" Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Anton Kolesov authored
commit ebc0c74e upstream. Order of registers has changed in GDB moving from 6.8 to 7.5. This patch updates KGDB to work properly with GDB 7.5, though makes it incompatible with 6.8. Signed-off-by:
Anton Kolesov <Anton.Kolesov@synopsys.com> Signed-off-by:
-
Vineet Gupta authored
commit 5c05483e upstream. There are certain test configuration of virtual platform which don't have any real console device (uart/pgu). So add tty0 as a fallback console device to allow system to boot and be accessible via telnet Otherwise with ttyS0 as only console, but 8250 disabled in kernel build, init chokes. Reported-by:
Anton Kolesov <akolesov@synopsys.com> Signed-off-by:
-
Dmitry Monakhov authored
commit aef4885a upstream. Error report likely result in IO so it is bad idea to do it from atomic context. This patch should fix following issue: BUG: sleeping function called from invalid context at include/linux/buffer_head.h:349 in_atomic(): 1, irqs_disabled(): 0, pid: 137, name: kworker/u128:1 5 locks held by kworker/u128:1/137: #0: ("writeback"){......}, at: [<ffffffff81085618>] process_one_work+0x228/0x4d0 #1: ((&(&wb->dwork)->work)){......}, at: [<ffffffff81085618>] process_one_work+0x228/0x4d0 #2: (jbd2_handle){......}, at: [<ffffffff81242622>] start_this_handle+0x712/0x7b0 #3: (&ei->i_data_sem){......}, at: [<ffffffff811fa387>] ext4_map_blocks+0x297/0x430 #4: (&(&bgl->locks[i].lock)->rlock){......}, at: [<ffffffff811f3180>] ext4_read_block_bitmap_nowait+0x5d0/0x630 CPU: 3 PID: 137 Comm: kworker/u128:1 Not tainted 3.17.0-rc2-00184-g82752e4 #165 Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.99.99.x028.061320111235 06/13/2011 Workqueue: writeback bdi_writeback_workfn (flush-1:0) 0000000000000411 ffff880813777288 ffffffff815c7fdc ffff880813777288 ffff880813a8bba0 ffff8808137772a8 ffffffff8108fb30 ffff880803e01e38 ffff880803e01e38 ffff8808137772c8 ffffffff811a8d53 ffff88080ecc6000 Call Trace: [<ffffffff815c7fdc>] dump_stack+0x51/0x6d [<ffffffff8108fb30>] __might_sleep+0xf0/0x100 [<ffffffff811a8d53>] __sync_dirty_buffer+0x43/0xe0 [<ffffffff811a8e03>] sync_dirty_buffer+0x13/0x20 [<ffffffff8120f581>] ext4_commit_super+0x1d1/0x230 [<ffffffff8120fa03>] save_error_info+0x23/0x30 [<ffffffff8120fd06>] __ext4_error+0xb6/0xd0 [<ffffffff8120f260>] ? ext4_group_desc_csum+0x140/0x190 [<ffffffff811f2d8c>] ext4_read_block_bitmap_nowait+0x1dc/0x630 [<ffffffff8122e23a>] ext4_mb_init_cache+0x21a/0x8f0 [<ffffffff8113ae95>] ? lru_cache_add+0x55/0x60 [<ffffffff8112e16c>] ? add_to_page_cache_lru+0x6c/0x80 [<ffffffff8122eaa0>] ext4_mb_init_group+0x190/0x280 [<ffffffff8122ec51>] ext4_mb_good_group+0xc1/0x190 [<ffffffff8123309a>] ext4_mb_regular_allocator+0x17a/0x410 [<ffffffff8122c821>] ? ext4_mb_use_preallocated+0x31/0x380 [<ffffffff81233535>] ? ext4_mb_new_blocks+0x205/0x8e0 [<ffffffff8116ed5c>] ? kmem_cache_alloc+0xfc/0x180 [<ffffffff812335b0>] ext4_mb_new_blocks+0x280/0x8e0 [<ffffffff8116f2c4>] ? __kmalloc+0x144/0x1c0 [<ffffffff81221797>] ? ext4_find_extent+0x97/0x320 [<ffffffff812257f4>] ext4_ext_map_blocks+0xbc4/0x1050 [<ffffffff811fa387>] ? ext4_map_blocks+0x297/0x430 [<ffffffff811fa3ab>] ext4_map_blocks+0x2bb/0x430 [<ffffffff81200e43>] ? ext4_init_io_end+0x23/0x50 [<ffffffff811feb44>] ext4_writepages+0x564/0xaf0 [<ffffffff815cde3b>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff810ac7bd>] ? lock_release_non_nested+0x2fd/0x3c0 [<ffffffff811a009e>] ? writeback_sb_inodes+0x10e/0x490 [<ffffffff811a009e>] ? writeback_sb_inodes+0x10e/0x490 [<ffffffff811377e3>] do_writepages+0x23/0x40 [<ffffffff8119c8ce>] __writeback_single_inode+0x9e/0x280 [<ffffffff811a026b>] writeback_sb_inodes+0x2db/0x490 [<ffffffff811a0664>] wb_writeback+0x174/0x2d0 [<ffffffff810ac359>] ? lock_release_holdtime+0x29/0x190 [<ffffffff811a0863>] wb_do_writeback+0xa3/0x200 [<ffffffff811a0a40>] bdi_writeback_workfn+0x80/0x230 [<ffffffff81085618>] ? process_one_work+0x228/0x4d0 [<ffffffff810856cd>] process_one_work+0x2dd/0x4d0 [<ffffffff81085618>] ? process_one_work+0x228/0x4d0 [<ffffffff81085c1d>] worker_thread+0x35d/0x460 [<ffffffff810858c0>] ? process_one_work+0x4d0/0x4d0 [<ffffffff810858c0>] ? process_one_work+0x4d0/0x4d0 [<ffffffff8108a885>] kthread+0xf5/0x100 [<ffffffff810990e5>] ? local_clock+0x25/0x30 [<ffffffff8108a790>] ? __init_kthread_worker+0x70/0x70 [<ffffffff815ce2ac>] ret_from_fork+0x7c/0xb0 [<ffffffff8108a790>] ? __init_kthread_work Signed-off-by:
-
Dmitry Monakhov authored
commit 9aa5d32b upstream. Besides the fact that this replacement improves code readability it also protects from errors caused direct EXT4_S(sb)->s_es manipulation which may result attempt to use uninitialized csum machinery. #Testcase_BEGIN IMG=/dev/ram0 MNT=/mnt mkfs.ext4 $IMG mount $IMG $MNT #Enable feature directly on disk, on mounted fs tune2fs -O metadata_csum $IMG # Provoke metadata update, likey result in OOPS touch $MNT/test umount $MNT #Testcase_END # Replacement script @@ expression E; @@ - EXT4_HAS_RO_COMPAT_FEATURE(E, EXT4_FEATURE_RO_COMPAT_METADATA_CSUM) + ext4_has_metadata_csum(E) https://bugzilla.kernel.org/show_bug.cgi?id=82201Signed-off-by:
-
Eric Sandeen authored
commit 0ff8947f upstream. Delalloc write journal reservations only reserve 1 credit, to update the inode if necessary. However, it may happen once in a filesystem's lifetime that a file will cross the 2G threshold, and require the LARGE_FILE feature to be set in the superblock as well, if it was not set already. This overruns the transaction reservation, and can be demonstrated simply on any ext4 filesystem without the LARGE_FILE feature already set: dd if=/dev/zero of=testfile bs=1 seek=2147483646 count=1 \ conv=notrunc of=testfile sync dd if=/dev/zero of=testfile bs=1 seek=2147483647 count=1 \ conv=notrunc of=testfile leads to: EXT4-fs: ext4_do_update_inode:4296: aborting transaction: error 28 in __ext4_handle_dirty_super EXT4-fs error (device loop0) in ext4_do_update_inode:4301: error 28 EXT4-fs error (device loop0) in ext4_reserve_inode_write:4757: Readonly filesystem EXT4-fs error (device loop0) in ext4_dirty_inode:4876: error 28 EXT4-fs error (device loop0) in ext4_da_write_end:2685: error 28 Adjust the number of credits based on whether the flag is already set, and whether the current write may extend past the LARGE_FILE limit. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
Theodore Ts'o authored
commit f4bb2981 upstream. If there is a corrupted file system which has directory entries that point at reserved, metadata inodes, prohibit them from being used by treating them the same way we treat Boot Loader inodes --- that is, mark them to be bad inodes. This prohibits them from being opened, deleted, or modified via chmod, chown, utimes, etc. In particular, this prevents a corrupted file system which has a directory entry which points at the journal inode from being deleted and its blocks released, after which point Much Hilarity Ensues. Reported-by:
Sami Liedes <sami.liedes@iki.fi> Signed-off-by:
-
Theodore Ts'o authored
commit e2bfb088 upstream. The boot loader inode (inode #5) should never be visible in the directory hierarchy, but it's possible if the file system is corrupted that there will be a directory entry that points at inode #5. In order to avoid accidentally trashing it, when such a directory inode is opened, the inode will be marked as a bad inode, so that it's not possible to modify (or read) the inode from userspace. Unfortunately, when we unlink this (invalid/illegal) directory entry, we will put the bad inode on the ophan list, and then when try to unlink the directory, we don't actually remove the bad inode from the orphan list before freeing in-memory inode structure. This means the in-memory orphan list is corrupted, leading to a kernel oops. In addition, avoid truncating a bad inode in ext4_destroy_inode(), since truncating the boot loader inode is not a smart thing to do. Reported-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Nicholas Bellinger authored
commit 0d0f660d upstream. This patch explicitly disables TX completion interrupt coalescing logic in isert_put_response() and isert_put_datain() that was originally added as an efficiency optimization in commit 95b60f07. It has been reported that this change can trigger ABORT_TASK timeouts under certain small block workloads, where disabling coalescing was required for stability. According to Sagi, this doesn't impact overall performance, so go ahead and disable it for now. Reported-by:
Moussa Ba <moussaba@micron.com> Reported-by:
Sagi Grimberg <sagig@dev.mellanox.co.il> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit e2480563 upstream. This patch fixes a bug in handling of SPC-3 PR Activate Persistence across Target Power Loss (APTPL) logic where re-creation of state for MappedLUNs from dynamically generated NodeACLs did not occur during I_T Nexus establishment. It adds the missing core_scsi3_check_aptpl_registration() call during core_tpg_check_initiator_node_acl() -> core_tpg_add_node_to_devs() in order to replay any pre-loaded APTPL metadata state associated with the newly connected SCSI Initiator Port. Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Joern Engel authored
commit f4c24db1 upstream. The code is currently riddled with "drop the hardware_lock to avoid a deadlock" bugs that expose races. One of those races seems to expose a valid warning in tcm_qla2xxx_clear_nacl_from_fcport_map. Add some bandaid to it. Signed-off-by:
Joern Engel <joern@logfs.org> Signed-off-by:
-
Dmitry Monakhov authored
commit 3e67cfad upstream. Otherwise this provokes complain like follows: WARNING: CPU: 12 PID: 5795 at fs/ext4/ext4_jbd2.c:48 ext4_journal_check_start+0x4e/0xa0() Modules linked in: brd iTCO_wdt lpc_ich mfd_core igb ptp dm_mirror dm_region_hash dm_log dm_mod CPU: 12 PID: 5795 Comm: python Not tainted 3.17.0-rc2-00175-gae5344f #158 Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.99.99.x028.061320111235 06/13/2011 0000000000000030 ffff8808116cfd28 ffffffff815c7dfc 0000000000000030 0000000000000000 ffff8808116cfd68 ffffffff8106ce8c ffff8808116cfdc8 ffff880813b16000 ffff880806ad6ae8 ffffffff81202008 0000000000000000 Call Trace: [<ffffffff815c7dfc>] dump_stack+0x51/0x6d [<ffffffff8106ce8c>] warn_slowpath_common+0x8c/0xc0 [<ffffffff81202008>] ? ext4_ioctl+0x9e8/0xeb0 [<ffffffff8106ceda>] warn_slowpath_null+0x1a/0x20 [<ffffffff8122867e>] ext4_journal_check_start+0x4e/0xa0 [<ffffffff81228c10>] __ext4_journal_start_sb+0x90/0x110 [<ffffffff81202008>] ext4_ioctl+0x9e8/0xeb0 [<ffffffff8107b0bd>] ? ptrace_stop+0x24d/0x2f0 [<ffffffff81088530>] ? alloc_pid+0x480/0x480 [<ffffffff8107b1f2>] ? ptrace_do_notify+0x92/0xb0 [<ffffffff81186545>] do_vfs_ioctl+0x4e5/0x550 [<ffffffff815cdbcb>] ? _raw_spin_unlock_irq+0x2b/0x40 [<ffffffff81186603>] SyS_ioctl+0x53/0x80 [<ffffffff815ce2ce>] tracesys+0xd0/0xd5 Reviewed-by:
-
Jan Kara authored
commit d6320cbf upstream. Use truncate_isize_extended() when hole is being created in a file so that ->page_mkwrite() will get called for the partial tail page if it is mmaped (see the first patch in the series for details). Signed-off-by:
-
Jan Kara authored
commit 90a80202 upstream. ->page_mkwrite() is used by filesystems to allocate blocks under a page which is becoming writeably mmapped in some process' address space. This allows a filesystem to return a page fault if there is not enough space available, user exceeds quota or similar problem happens, rather than silently discarding data later when writepage is called. However VFS fails to call ->page_mkwrite() in all the cases where filesystems need it when blocksize < pagesize. For example when blocksize = 1024, pagesize = 4096 the following is problematic: ftruncate(fd, 0); pwrite(fd, buf, 1024, 0); map = mmap(NULL, 1024, PROT_WRITE, MAP_SHARED, fd, 0); map[0] = 'a'; ----> page_mkwrite() for index 0 is called ftruncate(fd, 10000); /* or even pwrite(fd, buf, 1, 10000) */ mremap(map, 1024, 10000, 0); map[4095] = 'a'; ----> no page_mkwrite() called At the moment ->page_mkwrite() is called, filesystem can allocate only one block for the page because i_size == 1024. Otherwise it would create blocks beyond i_size which is generally undesirable. But later at ->writepage() time, we also need to store data at offset 4095 but we don't have block allocated for it. This patch introduces a helper function filesystems can use to have ->page_mkwrite() called at all the necessary moments. Signed-off-by:
-
Quinn Tran authored
commit 082f58ac upstream. During temporary resource starvation at lower transport layer, command is placed on queue full retry path, which expose this problem. The TCM queue full handling of SCF_TRANSPORT_TASK_SENSE currently sends the same cmd twice to lower layer. The 1st time led to cmd normal free path. The 2nd time cause Null pointer access. This regression bug was originally introduced v3.1-rc code in the following commit: commit e057f533 Author: Christoph Hellwig <hch@infradead.org> Date: Mon Oct 17 13:56:41 2011 -0400 target: remove the transport_qf_callback se_cmd callback Signed-off-by:
Quinn Tran <quinn.tran@qlogic.com> Signed-off-by:
Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by:
-
Jan Kara authored
commit 279bf6d3 upstream. The check whether quota format is set even though there are no quota files with journalled quota is pointless and it actually makes it impossible to turn off journalled quotas (as there's no way to unset journalled quota format). Just remove the check. Signed-off-by:
-
Darrick J. Wong authored
commit 064d8389 upstream. Free the buffer head if the journal descriptor block fails checksum verification. This is the jbd2 port of the e2fsprogs patch "e2fsck: free bh on csum verify error in do_one_pass". Signed-off-by:
-
Darrick J. Wong authored
commit a0626e75 upstream. When loading extended attributes, check each entry's value offset to make sure it doesn't collide with the entries. Without this check it is easy to crash the kernel by mounting a malicious FS containing a file with an EA wherein e_value_offs = 0 and e_value_size > 0 and then deleting the EA, which corrupts the name list. (See the f_ea_value_crash test's FS image in e2fsprogs for an example.) Signed-off-by:
-
- 03 Nov, 2014 6 commits
-
-
Johannes Weiner authored
commit abe5f972 upstream. The zone allocation batches can easily underflow due to higher-order allocations or spills to remote nodes. On SMP that's fine, because underflows are expected from concurrency and dealt with by returning 0. But on UP, zone_page_state will just return a wrapped unsigned long, which will get past the <= 0 check and then consider the zone eligible until its watermarks are hit. Commit 3a025760 ("mm: page_alloc: spill to remote nodes before waking kswapd") already made the counter-resetting use atomic_long_read() to accomodate underflows from remote spills, but it didn't go all the way with it. Make it clear that these batches are expected to go negative regardless of concurrency, and use atomic_long_read() everywhere. Fixes: 81c0a2bb ("mm: page_alloc: fair zone allocator policy") Reported-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Leon Romanovsky <leon@leon.nu> Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [ luis: backported to 3.16 by Johannes Weiner ] Signed-off-by:
-
Fabian Frederick authored
commit 2f3169fb upstream. Commit 65b38851 ("NFS: Fix /proc/fs/nfsfs/servers and /proc/fs/nfsfs/volumes") updated the following function: static int nfs_volume_list_open(struct inode *inode, struct file *file) it used &nfs_server_list_ops instead of &nfs_volume_list_ops which means cat /proc/fs/nfsfs/volumes = /proc/fs/nfsfs/servers Signed-off-by:
Fabian Frederick <fabf@skynet.be> Fixes: 65b38851 (NFS: Fix /proc/fs/nfsfs/servers and...) Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Eric W. Biederman authored
commit 65b38851 upstream. The usage of pid_ns->child_reaper->nsproxy->net_ns in nfs_server_list_open and nfs_client_list_open is not safe. /proc for a pid namespace can remain mounted after the all of the process in that pid namespace have exited. There are also times before the initial process in a pid namespace has started or after the initial process in a pid namespace has exited where pid_ns->child_reaper can be NULL or stale. Making the idiom pid_ns->child_reaper->nsproxy a double whammy of problems. Luckily all that needs to happen is to move /proc/fs/nfsfs/servers and /proc/fs/nfsfs/volumes under /proc/net to /proc/net/nfsfs/servers and /proc/net/nfsfs/volumes and add a symlink from the original location, and to use seq_open_net as it has been designed. Cc: Trond Myklebust <trond.myklebust@primarydata.com> Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Xose Vazquez Perez authored
commit 6a06e554 upstream. 0x0b05 0x17e8 RT5372 USB 2.0 bgn 2x2 ASUS USB-N14 0x0411 0x0253 RT5572 USB 2.0 abgn 2x2 BUFFALO WLP-U2-300D 0x0df6 0x0078 RT???? Sitecom N300 Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Canek Peláez Valdés authored
commit ac0372ab upstream. Signed-off-by:
Canek Peláez Valdés <canek@ciencias.unam.mx> Signed-off-by:
-
Geert Uytterhoeven authored
commit a968bed7 upstream. Unlike the clocks management code for runtime PM, the code used for system suspend does not check the pm_clock_entry.status field. If pm_clk_acquire() failed, ce->status will be PCE_STATUS_ERROR, and ce->clk will be a negative error code (e.g. 0xfffffffe = -2 = -ENOENT). Depending on the clock implementation, suspend or resume may crash with: Unable to handle kernel NULL pointer dereference at virtual address 00000026 (CCF clk_disable() has an IS_ERR_OR_NULL() check, while CCF clk_enable() only has a NULL check; pre-CCF implementations may behave differently) While just checking for PCE_STATUS_ERROR would be sufficient, it doesn't hurt to use the same state machine as is done for runtime PM, as this makes the two versions more similar, and eligible for a future consolidation. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
