- 30 Jul, 2021 8 commits
-
-
Krzysztof Kozlowski authored
No need for multiple spaces in variable declaration (the code does not use them in other places). No functional change. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Krzysztof Kozlowski authored
Several functions receive pointers to u8, sk_buff or other structs but do not modify the contents so make them const. This allows doing the same for local variables and in total makes the code a little bit safer. This makes const also data passed as "unsigned long opt" argument to nci_request() function. Usual flow for such functions is: 1. Receive "u8 *" and store it (the pointer) in a structure allocated on stack (e.g. struct nci_set_config_param), 2. Call nci_request() or __nci_request() passing a callback function an the pointer to the structure via an "unsigned long opt", 3. nci_request() calls the callback which dereferences "unsigned long opt" in a read-only way. This converts all above paths to use proper pointer to const data, so entire flow is safer. Signed-off-by:
-
Krzysztof Kozlowski authored
Few pointers to struct nfc_target and struct nfc_se can be made const. Signed-off-by:
-
Krzysztof Kozlowski authored
Several functions receive pointers to u8, char or sk_buff but do not modify the contents so make them const. This allows doing the same for local variables and in total makes the code a little bit safer. Signed-off-by:
-
Krzysztof Kozlowski authored
The nfc_llc_init() is used only in other __init annotated context. Signed-off-by:
-
Krzysztof Kozlowski authored
The af_nfc_exit() is used only in other __exit annotated context (nfc_exit()). Signed-off-by:
-
Krzysztof Kozlowski authored
The device_node in nfcmrvl_spi_parse_dt() cannot be const as it is passed to OF functions which modify it. Signed-off-by:
-
Yajun Deng authored
refcount_t type should be used instead of int when fib_treeref is used as a reference counter,and avoid use-after-free risks. Signed-off-by:
Yajun Deng <yajun.deng@linux.dev> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20210729071350.28919-1-yajun.deng@linux.devSigned-off-by:
-
- 29 Jul, 2021 32 commits
-
-
Tang Bin authored
In the function bcm_enetsw_probe(), 'ret' will be assigned by bcm_enet_change_mtu(), so 'ret = 0' make no sense. Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
DSA has gained the recent ability to deal gracefully with upper interfaces it cannot offload, such as the bridge, bonding or team drivers. When such uppers exist, the ports are still in standalone mode as far as the hardware is concerned. But when we deliver packets to the software bridge in order for that to do the forwarding, there is an unpleasant surprise in that the bridge will refuse to forward them. This is because we unconditionally set skb->offload_fwd_mark = true, meaning that the bridge thinks the frames were already forwarded in hardware by us. Since dp->bridge_dev is populated only when there is hardware offload for it, but not in the software fallback case, let's introduce a new helper that can be called from the tagger data path which sets the skb->offload_fwd_mark accordingly to zero when there is no hardware offload for bridging. This lets the bridge forward packets back to other interfaces of our switch, if needed. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by:
-
Di Zhu authored
When an ipvlan device is created on a bond device, the link state of the ipvlan device may be abnormal. This is because bonding device allows to add physical network card device in the down state and so NETDEV_CHANGE event will not be notified to other listeners, so ipvlan has no chance to update its link status. The following steps can cause such problems: 1) bond0 is down 2) ip link add link bond0 name ipvlan type ipvlan mode l2 3) echo +enp2s7 >/sys/class/net/bond0/bonding/slaves 4) ip link set bond0 up After these steps, use ip link command, we found ipvlan has NO-CARRIER: ipvlan@bond0: <NO-CARRIER, BROADCAST,MULTICAST,UP,M-DOWN> mtu ...> We can deal with this problem like VLAN: Add handling of NETDEV_UP events. If we receive NETDEV_UP event, we will update the link status of the ipvlan. Signed-off-by:
Di Zhu <zhudi21@huawei.com> Signed-off-by:
-
Davide Caratti authored
currently, only 'ingress' and 'clsact ingress' qdiscs store the tc 'chain id' in the skb extension. However, userspace programs (like ovs) are able to setup egress rules, and datapath gets confused in case it doesn't find the 'chain id' for a packet that's "recirculated" by tc. Change tcf_classify() to have the same semantic as tcf_classify_ingress() so that a single function can be called in ingress / egress, using the tc ingress / egress block respectively. Suggested-by:
Alaa Hleilel <alaa@nvidia.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-switch: add mirroring support This patch set adds per port and per VLAN mirroring in dpaa2-switch. The first 4 patches are just cosmetic changes. We renamed the dpaa2_switch_acl_tbl structure into dpaa2_switch_filter_block so that we can reuse it for filters that do not use the ACL table and reorganized the addition of trap, redirect and drop filters into a separate function. All this just to make for a more streamlined addition of the support for mirroring. The next 4 patches are actually adding the advertised support. Mirroring rules can be added in shared blocks, the driver will replicate the same configuration on all the switch ports part of the same block. The last patch documents the feature, presents its behavior and limitations and gives a couple of examples. ==================== Signed-off-by: -
Ioana Ciornei authored
Document the mirroring capabilities of the dpaa2-switch driver, any restrictions that are imposed and some example commands. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Ioana Ciornei authored
When mirroring rules are added in shared filter blocks, the same mirroring rule has to be configured on all the switch ports that are part of the same block. In case a switch port joins a shared block after mirroring filters have been already added to it, then all the mirror rules should be offloaded to the port. The reverse, removal of mirroring rules, has to be done at block unbind. For this purpose, the dpaa2_switch_block_offload_mirror() and dpaa2_switch_block_unoffload_mirror() functions are added and called upon binding and unbinding a switch port to/from a block. Signed-off-by:
-
Ioana Ciornei authored
Using the infrastructure added in the previous patch, extend tc-flower support with FLOW_ACTION_MIRRED based on VLAN. Tested with: tc qdisc add dev eth8 ingress_block 1 clsact tc filter add block 1 ingress protocol 802.1q flower skip_sw \ vlan_id 100 action mirred egress mirror dev eth6 tc filter del block 1 ingress pref 49152 Signed-off-by:
-
Ioana Ciornei authored
Add support for per port mirroring for the DPAA2 switch. We support only single mirror port, therefore we allow mirroring rules only as long as the destination port is always the same. Unlike all the actions (drop, redirect, trap) already supported by the dpaa2-switch driver, adding mirroring filters in shared blocks is not achieved by a singular ACL entry added in a table shared by the ports. This is why, when a new mirror filter is added in a block we have to got through all the switch ports sharing it and configure the filter individually on all. Signed-off-by:
-
Ioana Ciornei authored
Add the necessary MC API for setting up and configuring the mirroring feature on the DPSW DPAA2 object. Signed-off-by:
-
Ioana Ciornei authored
Extract the necessary steps to offload a filter by using the ACL table in a separate function - dpaa2_switch_cls_matchall_replace_acl(). This is intended to help with the code readability when the mirroring support is added. Signed-off-by:
-
Ioana Ciornei authored
Extract the necessary steps to offload a filter by using the ACL table in a separate function - dpaa2_switch_cls_flower_replace_acl(). This is intended to help with the code readability when the mirroring support is added. Signed-off-by:
-
Ioana Ciornei authored
Until now, shared filter blocks were implemented only by ACL tables shared between ports. Going forward, when the mirroring support will be added, this will not be true anymore. Rename the dpaa2_switch_acl_tbl into dpaa2_switch_filter_block so that we make it clear that the structure is used not only for filters that use the ACL table but will be used for all the filters that are added in a block. Signed-off-by:
-
Ioana Ciornei authored
Until now, the dpaa2_switch_tc_parse_action() function was used for all the supported tc actions since all of them were implemented by adding ACL table entries. In the next commits, the dpaa2-switch driver will gain mirroring support which is not using the same HW feature. Make sure that we specify the ACL in the function name so that we make it clear that it's only used for specific actions. Signed-off-by:
-
Shai Malin authored
Removing the qede module version which is not needed and not allowed with inbox drivers. Signed-off-by:
Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
Shai Malin <smalin@marvell.com> Signed-off-by:
-
Shai Malin authored
Removing the qed module version which is not needed and not allowed with inbox drivers. Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== NXP SJA1105 VLAN regressions These are 3 patches to fix issues seen with some more varied testing done after the changes in the "Traffic termination for sja1105 ports under VLAN-aware bridge" series were made: https://patchwork.kernel.org/project/netdevbpf/cover/20210726165536.1338471-1-vladimir.oltean@nxp.com/ Issue 1: traffic no longer works on a port after leaving a VLAN-aware bridge Issue 2: untagged traffic not dropped if pvid is absent from a VLAN-aware port Issue 3: PTP and STP broken on ports under a VLAN-aware bridge ==================== Signed-off-by:
-
Vladimir Oltean authored
On RX, a control packet with SJA1110 will have: - an in-band control extension (DSA tag) composed of a header and an optional trailer (if it is a timestamp frame). We can (and do) deduce the source port and switch id from this. - a VLAN header, which can either be the tag_8021q RX VLAN (pvid) or the bridge VLAN. The sja1105_vlan_rcv() function attempts to deduce the source port and switch id a second time from this. The basic idea is that even though we don't need the source port information from the tag_8021q header if it's a control packet, we do need to strip that header before we pass it on to the network stack. The problem is that we call sja1105_vlan_rcv for ports under VLAN-aware bridges, and that function tells us it couldn't identify a tag_8021q header, so we need to perform imprecise RX by VID. Well, we don't, because we already know the source port and switch ID. This patch drops the return value from sja1105_vlan_rcv and we just look at the source_port and switch_id values from sja1105_rcv and sja1110_rcv which were initialized to -1. If they are still -1 it means we need to perform imprecise RX. Fixes: 884be12f ("net: dsa: sja1105: add support for imprecise RX") Signed-off-by:
-
Vladimir Oltean authored
Surprisingly, this configuration: ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 bridge vlan del dev swp2 vid 1 still has the sja1105 switch sending untagged packets to the CPU (and failing to decode them, since dsa_find_designated_bridge_port_by_vid searches by VID 1 and rightfully finds no bridge VLAN 1 on a port). Dumping the switch configuration, the VLANs are managed properly: - the pvid of swp2 is 1 in the MAC Configuration Table, but - only the CPU port is in the port membership of VLANID 1 in the VLAN Lookup Table When the ingress packets are tagged with VID 1, they are properly dropped. But when they are untagged, they are able to reach the CPU port. Also, when the pvid in the MAC Configuration Table is changed to e.g. 55 (an unused VLAN), the untagged packets are also dropped. So it looks like: - the switch bypasses ingress VLAN membership checks for untagged traffic - the reason why the untagged traffic is dropped when I make the pvid 55 is due to the lack of valid destination ports in VLAN 55, rather than an ingress membership violation - the ingress VLAN membership cheks are only done for VLAN-tagged traffic Interesting. It looks like there is an explicit bit to drop untagged traffic, so we should probably be using that to preserve user expectations. Note that only VLAN-aware ports should drop untagged packets due to no pvid - when VLAN-unaware, the software bridge doesn't do this even if there is no pvid on any bridge port and on the bridge itself. So the new sja1105_drop_untagged() function cannot simply be called with "false" from sja1105_bridge_vlan_add() and with "true" from sja1105_bridge_vlan_del. Instead, we need to also consider the VLAN awareness state. That means we need to hook the "drop untagged" setting in all the same places where the "commit pvid" logic is, and it needs to factor in all the state when flipping the "drop untagged" bit: is our current pvid in the VLAN Lookup Table, and is the current port in that VLAN's port membership list? VLAN-unaware ports will never drop untagged frames because these checks always succeed by construction, and the tag_8021q VLANs cannot be changed by the user. Signed-off-by:
-
Vladimir Oltean authored
Now that we no longer have the ultra-central sja1105_build_vlan_table(), we need to be more careful about checking all corner cases manually. For example, when a port leaves a VLAN-aware bridge, it becomes standalone so its pvid should become a tag_8021q RX VLAN again. However, sja1105_commit_pvid() only gets called from sja1105_bridge_vlan_add() and from sja1105_vlan_filtering(), and no VLAN awareness change takes place (VLAN filtering is a global setting for sja1105, so the switch remains VLAN-aware overall). This means that we need to put another sja1105_commit_pvid() call in sja1105_bridge_member(). Fixes: 6dfd23d3 ("net: dsa: sja1105: delete vlan delta save/restore logic") Signed-off-by:
-
David S. Miller authored
Jeremy Kerr says: ==================== Add Management Component Transport Protocol support This series adds core MCTP support to the kernel. From the Kconfig description: Management Component Transport Protocol (MCTP) is an in-system protocol for communicating between management controllers and their managed devices (peripherals, host processors, etc.). The protocol is defined by DMTF specification DSP0236. This option enables core MCTP support. For communicating with other devices, you'll want to enable a driver for a specific hardware channel. This implementation allows a sockets-based API for sending and receiving MCTP messages via sendmsg/recvmsg on SOCK_DGRAM sockets. Kernel stack control is all via netlink, using existing RTM_* messages. The userspace ABI change is fairly small; just the necessary AF_/ETH_P_/ARPHDR_ constants, a new sockaddr, and a new netlink attribute. For MAINTAINERS, I've just included netdev@ as the list entry. I'm happy to alter this based on preferences here - an alternative would be the OpenBMC list (the main user of the MCTP interface), or we can create a new list entirely. We have a couple of interface drivers almost ready to go at the moment, but those can wait until the core code has some review. This is v4 of the series; v1 and v2 were both RFC. selinux folks: CCing 01/15 due to the new PF_MCTP protocol family. linux-doc folks: CCing 15/15 for the new MCTP overview document. Review, comments, questions etc. are most welcome. Cheers, Jeremy v2: - change to match spec terminology: controller -> component - require specific capabilities for bind() & sendmsg() - add address and tag defintions to uapi - add selinux AF_MCTP table definitions - remove strict cflags; warnings are present in common headers v3: - require caps for MCTP bind() & send() - comment typo fixes - switch to an array for local EIDs - fix addrinfo dump iteration & error path - add RTM_DELADDR - remove GENMASK() and BIT() from uapi v4: - drop tun patch; that can be submitted separately - keep nipa happy: add maintainer CCs, including doc and selinux - net-next rebase - Include AF_MCTP in af_family_slock_keys and pf_family_names - Introduce MODULE_ definitions earlier - upstream change: set_link_af no longer called with RTNL held - add kdoc for net_device.mctp_ptr - don't inline mctp_rt_match_eid - require rtm_type == RTN_UNICAST in route management handlers - remove unused RTAX policy table - fix mctp_sock->keys rcu annotations - fix spurious rcu_read_unlock in route input ==================== Signed-off-by: -
Jeremy Kerr authored
This change adds a brief document about the sockets API provided for sending and receiving MCTP messages from userspace. This is roughly based on the OpenBMC design document, at: https://github.com/openbmc/docs/blob/master/designs/mctp/mctp-kernel.mdSigned-off-by:
Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by:
-
Matt Johnston authored
Currently we have a compile-time default network (MCTP_INITIAL_DEFAULT_NET). This change introduces a default_net field on the net namespace, allowing future configuration for new interfaces. Signed-off-by:
Matt Johnston <matt@codeconstruct.com.au> Signed-off-by:
-
Matt Johnston authored
Now that we have a neighbour implementation, hook it up to the output path to set the dest hardware address for outgoing packets. Signed-off-by:
-
Jeremy Kerr authored
This change implements MCTP fragmentation (based on route & device MTU), and corresponding reassembly. The MCTP specification only allows for fragmentation on the originating message endpoint, and reassembly on the destination endpoint - intermediate nodes do not need to reassemble/refragment. Consequently, we only fragment in the local transmit path, and reassemble locally-bound packets. Messages are required to be in-order, so we simply cancel reassembly on out-of-order or missing packets. In the fragmentation path, we just break up the message into MTU-sized fragments; the skb structure is a simple copy for now, which we can later improve with a shared data implementation. For reassembly, we keep track of incoming message fragments using the existing tag infrastructure, allocating a key on the (src,dest,tag) tuple, and reassembles matching fragments into a skb->frag_list. Signed-off-by:
-
Jeremy Kerr authored
Start filling-out the socket syscalls: bind, sendmsg & recvmsg. This requires an input route implementation, so we add to mctp_route_input, allowing lookups on binds & message tags. This just handles single-packet messages at present, we will add fragmentation in a future change. Signed-off-by:
-
Matt Johnston authored
This change adds the netlink interfaces for manipulating the MCTP neighbour table. Signed-off-by:
-
Matt Johnston authored
Add an initial neighbour table implementation, to be used in the route output path. Signed-off-by:
-
Matt Johnston authored
This change adds RTM_GETROUTE, RTM_NEWROUTE & RTM_DELROUTE handlers, allowing management of the MCTP route table. Includes changes from Jeremy Kerr <jk@codeconstruct.com.au>. Signed-off-by:
-
Jeremy Kerr authored
Add a simple routing table, and a couple of route output handlers, and the mctp packet_type & handler. Includes changes from Matt Johnston <matt@codeconstruct.com.au>. Signed-off-by:
-
Jeremy Kerr authored
This change adds the infrastructure for managing MCTP netdevices; we add a pointer to the AF_MCTP-specific data to struct netdevice, and hook up the rtnetlink operations for adding and removing addresses. Includes changes from Matt Johnston <matt@codeconstruct.com.au>. Signed-off-by:
-
Jeremy Kerr authored
Add an empty drivers/net/mctp/, for future interface drivers. Signed-off-by:
-
