- 12 Apr, 2018 22 commits
-
-
Sowmini Varadhan authored
[ Upstream commit d36f45e5 ] Address/port initialization should work correctly regardless of the order in which command line arguments are supplied, E.g, cfg_port should be used to connect to the remote host even if it is processed after -D, src/dst address initialization should not require that [-4|-6] be specified before the -S or -D args, receiver should be able to bind to *.<cfg_port> Achieve this by making sure that the address/port structures are initialized after all command line options are parsed. Store cfg_port in host-byte order, and use htons() to set up the sin_port/sin6_port before bind/connect, so that the network system calls get the correct values in network-byte order. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gustavo A. R. Silva authored
[ Upstream commit 63f1e05f ] df->governor is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Notice that df->governor is being null checked at line 1004: if (df->governor) {, which implies it might be null. Fix this by null checking df->governor before dereferencing it. Addresses-Coverity-ID: 1401988 ("Dereference before null check") Fixes: bcf23c79 ("PM / devfreq: Fix available_governor sysfs") Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by:
-
Jerome Brunet authored
[ Upstream commit 12a26c29 ] divider_recalc_rate() is an helper function used by clock divider of different types, so the structure containing the 'hw' pointer is not always a 'struct clk_divider' At the following line: > div = _get_div(table, val, flags, divider->width); in several cases, the value of 'divider->width' is garbage as the actual structure behind this memory is not a 'struct clk_divider' Fortunately, this width value is used by _get_val() only when CLK_DIVIDER_MAX_AT_ZERO flag is set. This has never been the case so far when the structure is not a 'struct clk_divider'. This is probably why we did not notice this bug before Fixes: afe76c8f ("clk: allow a clk divider with max divisor when zero") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Acked-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Oleksij Rempel authored
[ Upstream commit 1bfe8889 ] The only way of stopping the watchdog is by resetting it. Add the watchdog op for stopping the device and reset if a reset line is provided. At same time WDOG_HW_RUNNING should be remove from dw_wdt_start. As commented by Guenter Roeck: dw_wdt sets WDOG_HW_RUNNING in its open function. Result is that the kref_get() in watchdog_open() won't be executed. But then kref_put() in close will be called since the watchdog now does stop. This causes the imbalance. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-watchdog@vger.kernel.org Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
NeilBrown authored
[ Upstream commit 61647823 ] d_move() will call __d_drop() and then __d_rehash() on the dentry being moved. This creates a small window when the dentry appears to be unhashed. Many tests of d_unhashed() are made under ->d_lock and so are safe from racing with this window, but some aren't. In particular, getcwd() calls d_unlinked() (which calls d_unhashed()) without d_lock protection, so it can race. This races has been seen in practice with lustre, which uses d_move() as part of name lookup. See: https://jira.hpdd.intel.com/browse/LU-9735 It could race with a regular rename(), and result in ENOENT instead of either the 'before' or 'after' name. The race can be demonstrated with a simple program which has two threads, one renaming a directory back and forth while another calls getcwd() within that directory: it should never fail, but does. See: https://patchwork.kernel.org/patch/9455345/ We could fix this race by taking d_lock and rechecking when d_unhashed() reports true. Alternately when can remove the window, which is the approach this patch takes. ___d_drop() is introduce which does *not* clear d_hash.pprev so the dentry still appears to be hashed. __d_drop() calls ___d_drop(), then clears d_hash.pprev. __d_move() now uses ___d_drop() and only clears d_hash.pprev when not rehashing. Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Moni Shoua authored
[ Upstream commit a42b63c1 ] Change the default mapping between TC and TCG as follows: Prio | TC/TCG | from to | (set by FW) (set by SW) ---------+----------------------------------- 0 | 0/0 0/7 1 | 1/0 0/6 2 | 2/0 0/5 3 | 3/0 0/4 4 | 4/0 0/3 5 | 5/0 0/2 6 | 6/0 0/1 7 | 7/0 0/0 These new settings cause that a pause frame for any prio stops traffic for all prios. Fixes: 564c274c ("net/mlx4_en: DCB QoS support") Signed-off-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 5928c281 ] We're seeing a lot of bogus backlight interfaces on newer machines without a LCD such as desktops, servers and HDMI sticks. This causes userspace to show a non-functional brightness slider in e.g. the GNOME3 system menu, which is undesirable. And, in general, we should simply just not register a non functional backlight interface. Checking the LCD flag causes the bogus acpi_video backlight interfaces to go away (on the machines this was tested on). This change sets the lcd_only option by default on any machines which are Win8-ready, to fix this. This is not entirely without a risk of regressions, but video_detect.c already prefers native-backlight interfaces over the acpi_video one on Win8-ready machines, calling acpi_video_unregister_backlight() as soon as a native interface shows up. This is done because the ACPI backlight interface often is broken on Win8-ready machines, because win8 does not seem to actually use it. So in practice we already end up not registering the ACPI backlight interface on (most) Win8-ready machines with a LCD panel, thus this change does not change anything for (most) machines with a LCD panel and on machines without a LCD panel we actually don't want to register any backlight interfaces. This has been tested on the following machines and fixes a bogus backlight interface showing up there: - Desktop with an Asrock B150M Pro4S/D3 m.b. using i5-6500 builtin gfx - Intel Compute Stick STK1AW32SC - Meegopad T08 HDMI stick Bogus backlight interfaces have also been reported on: - Desktop with Asus H87I-Plus m.b. - Desktop with ASRock B75M-ITX m.b. - Desktop with Gigabyte Z87-D3HP m.b. - Dell PowerEdge T20 desktop Link: https://bugzilla.redhat.com/show_bug.cgi?id=1097436 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133327 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133329 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1133646Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Sowmini Varadhan authored
[ Upstream commit 7ae0c649 ] If the rds_sock is not added to the bind_hash_table, we must reset rs_bound_addr so that rds_remove_bound will not trip on this rds_sock. rds_add_bound() does a rds_sock_put() in this failure path, so failing to reset rs_bound_addr will result in a socket refcount bug, and will trigger a WARN_ON with the stack shown below when the application subsequently tries to close the PF_RDS socket. WARNING: CPU: 20 PID: 19499 at net/rds/af_rds.c:496 \ rds_sock_destruct+0x15/0x30 [rds] : __sk_destruct+0x21/0x190 rds_remove_bound.part.13+0xb6/0x140 [rds] rds_release+0x71/0x120 [rds] sock_release+0x1a/0x70 sock_close+0xe/0x20 __fput+0xd5/0x210 task_work_run+0x82/0xa0 do_exit+0x2ce/0xb30 ? syscall_trace_enter+0x1cc/0x2b0 do_group_exit+0x39/0xa0 SyS_exit_group+0x10/0x10 do_syscall_64+0x61/0x1a0 Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 820da535 ] Report offset parameter in L2TP_CMD_SESSION_GET command if it has been configured by userspace Fixes: 309795f4 ("l2tp: Add netlink control API for L2TP") Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Fuyun Liang authored
[ Upstream commit 27b5bf49 ] When phy exists, we use the value of phydev.autoneg to represent the auto-negotiation state of hardware. Otherwise, we use the value of mac.autoneg to represent it. This patch fixes for getting a error value of auto-negotiation state in hclge_get_autoneg(). Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Peng Li authored
[ Upstream commit 99fdf6b1 ] This patch fixes a memory leak problems in change tqps process, the function hns3_uninit_all_ring and hns3_init_all_ring may be called many times. Signed-off-by:
Mingguang Qu <qumingguang@huawei.com> Signed-off-by:
-
Mengting Zhang authored
[ Upstream commit ca800068 ] While monitoring a multithread process with pid option, perf sometimes may return sys_perf_event_open failure with 3(No such process) if any of the process's threads die before we open the event. However, we want perf continue monitoring the remaining threads and do not exit with error. Here, the patch enables perf_evsel::ignore_missing_thread for -p option to ignore complete failure if any of threads die before we open the event. But it may still return sys_perf_event_open failure with 22(Invalid) if we monitors several event groups. sys_perf_event_open: pid 28960 cpu 40 group_fd 118202 flags 0x8 sys_perf_event_open: pid 28961 cpu 40 group_fd 118203 flags 0x8 WARNING: Ignored open failure for pid 28962 sys_perf_event_open: pid 28962 cpu 40 group_fd [118203] flags 0x8 sys_perf_event_open failed, error -22 That is because when we ignore a missing thread, we change the thread_idx without dealing with its fds, FD(evsel, cpu, thread). Then get_group_fd() may return a wrong group_fd for the next thread and sys_perf_event_open() return with 22. sys_perf_event_open(){ ... if (group_fd != -1) perf_fget_light()//to get corresponding group_leader by group_fd ... if (group_leader) if (group_leader->ctx->task != ctx->task)//should on the same task goto err_context ... } This patch also fixes this bug by introducing perf_evsel__remove_fd() and update_fds to allow removing fds for the missing thread. Changes since v1: - Change group_fd__remove() into a more genetic way without changing code logic - Remove redundant condition Changes since v2: - Use a proper function name and add some comment. - Multiline comment style fixes. Committer testing: Before this patch the recently added 'perf stat --per-thread' for system wide counting would race while enumerating all threads using /proc: [root@jouet ~]# perf stat --per-thread failed to parse CPUs map: No such file or directory Usage: perf stat [<options>] [<command>] -C, --cpu <cpu> list of cpus to monitor in system-wide -a, --all-cpus system-wide collection from all CPUs [root@jouet ~]# perf stat --per-thread failed to parse CPUs map: No such file or directory Usage: perf stat [<options>] [<command>] -C, --cpu <cpu> list of cpus to monitor in system-wide -a, --all-cpus system-wide collection from all CPUs [root@jouet ~]# When, say, the kernel was being built, so lots of shortlived threads, after this patch this doesn't happen. Signed-off-by:
Mengting Zhang <zhangmengting@huawei.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Cheng Jian <cj.chengjian@huawei.com> Cc: Li Bin <huawei.libin@huawei.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1513148513-6974-1-git-send-email-zhangmengting@huawei.com [ Remove one use 'evlist' alias variable ] Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit 9f5c6d87 ] This improve the error message so that user can know event-name error before writing new events to kprobe-events interface. E.g. ====== #./perf probe -x /lib64/libc-2.25.so malloc_get_state* Internal error: "malloc_get_state@GLIBC_2" is an invalid event name. Error: Failed to add events. ====== Reported-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Reviewed-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Tested-by:
-
Masami Hiramatsu authored
[ Upstream commit 4b3a2716 ] Commit d8040645 ("perf symbols: Allow user probes on versioned symbols") allows user to find default versioned symbols (with "@@") in map. However, it did not enable normal versioned symbol (with "@") for perf-probe. E.g. ===== # ./perf probe -x /lib64/libc-2.25.so malloc_get_state Failed to find symbol malloc_get_state in /usr/lib64/libc-2.25.so Error: Failed to add events. ===== This solves above issue by improving perf-probe symbol search function, as below. ===== # ./perf probe -x /lib64/libc-2.25.so malloc_get_state Added new event: probe_libc:malloc_get_state (on malloc_get_state in /usr/lib64/libc-2.25.so) You can now use it in all perf tools, such as: perf record -e probe_libc:malloc_get_state -aR sleep 1 # ./perf probe -l probe_libc:malloc_get_state (on malloc_get_state@GLIBC_2.2.5 in /usr/lib64/libc-2.25.so) ===== Signed-off-by:
-
Yi Zeng authored
[ Upstream commit a5de11d6 ] When invoking allow_maximum_power and traverse tz->thermal_instances, we should grab thermal_zone_device->lock to avoid race condition. For example, during the system reboot, if the mali GPU device implements device shutdown callback and unregister GPU devfreq cooling device, the deleted list head may be accessed to cause panic, as the following log shows: [ 33.551070] c3 25 (kworker/3:0) Unable to handle kernel paging request at virtual address dead000000000070 [ 33.566708] c3 25 (kworker/3:0) pgd = ffffffc0ed290000 [ 33.572071] c3 25 (kworker/3:0) [dead000000000070] *pgd=00000001ed292003, *pud=00000001ed292003, *pmd=0000000000000000 [ 33.581515] c3 25 (kworker/3:0) Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 33.599761] c3 25 (kworker/3:0) CPU: 3 PID: 25 Comm: kworker/3:0 Not tainted 4.4.35+ #912 [ 33.614137] c3 25 (kworker/3:0) Workqueue: events_freezable thermal_zone_device_check [ 33.620245] c3 25 (kworker/3:0) task: ffffffc0f32e4200 ti: ffffffc0f32f0000 task.ti: ffffffc0f32f0000 [ 33.629466] c3 25 (kworker/3:0) PC is at power_allocator_throttle+0x7c8/0x8a4 [ 33.636609] c3 25 (kworker/3:0) LR is at power_allocator_throttle+0x808/0x8a4 [ 33.643742] c3 25 (kworker/3:0) pc : [<ffffff8008683dd0>] lr : [<ffffff8008683e10>] pstate: 20000145 [ 33.652874] c3 25 (kworker/3:0) sp : ffffffc0f32f3bb0 [ 34.468519] c3 25 (kworker/3:0) Process kworker/3:0 (pid: 25, stack limit = 0xffffffc0f32f0020) [ 34.477220] c3 25 (kworker/3:0) Stack: (0xffffffc0f32f3bb0 to 0xffffffc0f32f4000) [ 34.819822] c3 25 (kworker/3:0) Call trace: [ 34.824021] c3 25 (kworker/3:0) Exception stack(0xffffffc0f32f39c0 to 0xffffffc0f32f3af0) [ 34.924993] c3 25 (kworker/3:0) [<ffffff8008683dd0>] power_allocator_throttle+0x7c8/0x8a4 [ 34.933184] c3 25 (kworker/3:0) [<ffffff80086807f4>] handle_thermal_trip.part.25+0x70/0x224 [ 34.941545] c3 25 (kworker/3:0) [<ffffff8008680a68>] thermal_zone_device_update+0xc0/0x20c [ 34.949818] c3 25 (kworker/3:0) [<ffffff8008680bd4>] thermal_zone_device_check+0x20/0x2c [ 34.957924] c3 25 (kworker/3:0) [<ffffff80080b93a4>] process_one_work+0x168/0x458 [ 34.965414] c3 25 (kworker/3:0) [<ffffff80080ba068>] worker_thread+0x13c/0x4b4 [ 34.972650] c3 25 (kworker/3:0) [<ffffff80080c0a4c>] kthread+0xe8/0xfc [ 34.979187] c3 25 (kworker/3:0) [<ffffff8008084e90>] ret_from_fork+0x10/0x40 [ 34.986244] c3 25 (kworker/3:0) Code: f9405e73 eb1302bf d102e273 54ffc460 (b9402a61) [ 34.994339] c3 25 (kworker/3:0) ---[ end trace 32057901e3b7e1db ]--- Signed-off-by:
Yi Zeng <yizeng@asrmicro.com> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Tobias Brunner authored
[ Upstream commit 09ee9dba ] If SNAT modifies the source address the resulting packet might match an IPsec policy, reinject the packet if that's the case. The exact same thing is already done for IPv4. Signed-off-by:
Tobias Brunner <tobias@strongswan.org> Acked-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Ioan Moldovan authored
[ Upstream commit 0a03f98b ] This patch adds the 04ca:3015 (from a QCA9377 board) Bluetooth device to the btusb blacklist and makes the kernel use the btqca module instead of btusb. The patch is necessary because, without it the 04ca:3015 device defaults to using the btusb driver, which makes the WIFI side of the QCA9377 board unusable (obtains 0 MBps in speedtest, when the 04ca:3015 bluetooth is used with an audio headset). /sys/kernel/debug/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3015 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Ioan Moldovan <ioan.moldovan1999@gmail.com> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Rasmus Villemoes authored
[ Upstream commit d5c7b4d5 ] Commit a22950c8 (mmc: sdhci-of-esdhc: add quirk SDHCI_QUIRK_BROKEN_TIMEOUT_VAL for ls1021a) added logic to the driver to enable the broken timeout val quirk for ls1021a, but did not add the corresponding compatible string to the device tree, so it didn't really have any effect. Fix that. Signed-off-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Martin Blumenstingl authored
[ Upstream commit 86aacdca ] "rem * SDM_DEN" can easily overflow on the 32-bit Meson8 and Meson8b SoCs if the "remainder" (after the division operation) is greater than 262143Hz. This is likely to happen since the input clock for the MPLLs on Meson8 and Meson8b is "fixed_pll", which is running at a rate of 2550MHz. One example where this was observed to be problematic was the Ethernet clock calculation (which takes MPLL2 as input). When requesting a rate of 125MHz there is a remainder of 2500000Hz. The resulting MPLL2 rate before this patch was 127488329Hz. The resulting MPLL2 rate after this patch is 124999103Hz. Commit b609338b ("clk: meson: mpll: use 64bit math in rate_from_params") already fixed a similar issue in rate_from_params. Fixes: 007e6e5c ("clk: meson: mpll: add rw operation") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Tatyana Nikolova authored
[ Upstream commit ce9ce741 ] Casting to u16 before validating IRD/ORD connection parameters could cause recording wrong IRD/ORD values in the cm_node. Validate the IRD/ORD parameters as they are passed by the application before recording them. Fixes: f27b4746 ("i40iw: add connection management code") Signed-off-by:
Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Shiraz Saleem authored
[ Upstream commit fe99afd1 ] Lower Inbound RDMA Read Queue (Q1) object count by a factor of 2 as it is incorrectly doubled. Also, round up Q1 and Transmit FIFO (XF) object count to power of 2 to satisfy hardware requirement. Fixes: 86dbcd0f ("i40iw: add file to handle cqp calls") Signed-off-by:
-
Shiraz Saleem authored
[ Upstream commit df8b13a1 ] Partial FPDU processing is broken as the sequence number for the first partial FPDU is wrong due to incorrect Q2 buffer offset. The offset should be 64 rather than 16. Fixes: 786c6adb ("i40iw: add puda code") Signed-off-by:
-
- 08 Apr, 2018 18 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit e6cfc525 which is commit 53c81e95 upstream. Ben writes that there are a number of follow-on patches needed to fix this up, but they get complex to backport, and some custom fixes are needed, so let's just revert this and wait for a "real" set of patches to resolve this to be submitted if it is really needed. Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Petr Vorel <pvorel@suse.cz> Cc: Alexey Kodanev <alexey.kodanev@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 0049457b which was commit a8b149d3 upstream. The backport was not correct, so just drop it entirely. Reported-by:
-
Greg Kroah-Hartman authored
This reverts commit 2f1f60c4 which was commit 7be4b5dc upstream. It requires a driver that was not merged until 4.16, so remove it from this stable tree as it is pointless. Reported-by:
-
Greg Kroah-Hartman authored
This reverts commit 0ed43f94 which was comit e153db03 upstream. It requires a driver that was not merged until 4.16, so remove it from this stable tree as it is pointless. Reported-by:
-
Mikulas Patocka authored
commit bd5c4fac upstream. I'm getting a slab named "biovec-(1<<(21-12))". It is caused by unintended expansion of the macro BIO_MAX_PAGES. This patch renames it to biovec-max. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Matthias Brugger authored
commit d61d263c upstream. The driver implementation returns support for private flags, while no private flags are present. When asked for the number of private flags it returns the number of statistic flag names. Fix this by returning EOPNOTSUPP for not implemented ethtool flags. Signed-off-by:
Matthias Brugger <mbrugger@suse.com> Signed-off-by:
-
Keerthy authored
commit aac4619d upstream. Set powerhold property for tps65917 Signed-off-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Mike Frysinger authored
commit 65d9982d upstream. ECMA-48 [1] (aka ISO 6429) has defined SGR 21 as "doubly underlined" since at least March 1984. The Linux kernel has treated it as SGR 22 "normal intensity" since it was added in Linux-0.96b in June 1992. Before that, it was simply ignored. Other terminal emulators have either ignored it, or treat it as double underline now. xterm for example added support in its 304 release (May 2014) [2] where it was previously ignoring it. Changing this behavior shouldn't be an issue: - It isn't a named capability in ncurses's terminfo database, so no script is using libtinfo/libcurses to look this up, or using tput to query & output the right sequence. - Any script assuming SGR 21 will reset intensity in all terminals already do not work correctly on non-Linux VTs (including running under screen/tmux/etc...). - If someone has written a script that only runs in the Linux VT, and they're using SGR 21 (instead of SGR 22), the output should still be readable. imo it's important to change this as the Linux VT's non-conformance is sometimes used as an argument for other terminal emulators to not implement SGR 21 at all, or do so incorrectly. [1]: https://www.ecma-international.org/publications/standards/Ecma-048.htm [2]: https://github.com/ThomasDickey/xterm-snapshots/commit/2fd29cb98d214cb536bcafbee00bc73b3f1eeb9dSigned-off-by:
Mike Frysinger <vapier@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Ondrej Zary authored
commit 04bb1719 upstream. The touch sensor buttons on Sony VAIO VGN-CS series laptops (e.g. VGN-CS31S) are a separate PS/2 device. As the MUX is disabled for all VAIO machines by the nomux blacklist, the data from touch sensor buttons and touchpad are combined. The protocol used by the buttons is probably similar to the touchpad protocol (both are Synaptics) so both devices get enabled. The controller combines the data, creating a mess which results in random button clicks, touchpad stopping working and lost sync error messages: psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4 psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse serio1: issuing reconnect request Add a new i8042_dmi_forcemux_table whitelist with VGN-CS. With MUX enabled, touch sensor buttons are detected as separate device (and left disabled as there's currently no driver), fixing all touchpad problems. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dennis Wassenberg authored
commit b56af54a upstream. Reset i8042 before probing because of insufficient BIOS initialisation of the i8042 serial controller. This makes Synaptics touchpad detection possible. Without resetting the Synaptics touchpad is not detected because there are always NACK messages from AUX port. Signed-off-by:
Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Masaki Ota authored
commit 567b9b54 upstream. The primary interface for the touchpad device in Thinkpad L570 is SMBus, so ALPS overlooked PS2 interface Firmware setting of TrackStick, and shipped with TrackStick otp bit is disabled. The address 0xD7 contains device number information, so we can identify the device by checking this value, but to access it we need to enable Command mode, and then re-enable the device. Devices shipped in Thinkpad L570 report either 0x0C or 0x1D as device numbers, if we see them we assume that the devices are DualPoints. The same issue exists on Dell Latitude 7370. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196929 Fixes: 646580f793 ("Input: ALPS - fix multi-touch decoding on SS4 plus touchpads") Signed-off-by:
Masaki Ota <masaki.ota@jp.alps.com> Tested-by:
Aaron Ma <aaron.ma@canonical.com> Tested-by:
Jonathan Liu <net147@gmail.com> Tested-by:
Jaak Ristioja <jaak@ristioja.ee> Cc: stable@vger.kernel.org Signed-off-by:
-
Gaku Inami authored
commit 9de9a449 upstream. This reverts commit 452562ab ("base: arch_topology: fix section mismatch build warnings"). It causes the notifier call hangs in some use-cases. In some cases with using maxcpus, some of cpus are booted first and then the remaining cpus are booted. As an example, some users who want to realize fast boot up often use the following procedure. 1) Define all CPUs on device tree (CA57x4 + CA53x4) 2) Add "maxcpus=4" in bootargs 3) Kernel boot up with CA57x4 4) After kernel boot up, CA53x4 is booted from user When kernel init was finished, CPUFREQ_POLICY_NOTIFIER was not still unregisterd. This means that "__init init_cpu_capacity_callback()" will be called after kernel init sequence. To avoid this problem, it needs to remove __init{,data} annotations by reverting this commit. Also, this commit was needed to fix kernel compile issue below. However, this issue was also fixed by another patch: commit 82d8ba71 ("arch_topology: Fix section miss match warning due to free_raw_capacity()") in v4.15 as well. Whereas commit 452562ab added all the missing __init annotations, commit 82d8ba71 removed it from free_raw_capacity(). WARNING: vmlinux.o(.text+0x548f24): Section mismatch in reference from the function init_cpu_capacity_callback() to the variable .init.text:$x The function init_cpu_capacity_callback() references the variable __init $x. This is often because init_cpu_capacity_callback lacks a __init annotation or the annotation of $x is wrong. Fixes: 82d8ba71 ("arch_topology: Fix section miss match warning due to free_raw_capacity()") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Gaku Inami <gaku.inami.xh@renesas.com> Reviewed-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
-
Frank Mori Hess authored
commit e1d9fc04 upstream. Ack ai fifo error interrupts in interrupt handler to clear interrupt after fifo overflow. It should prevent lock-ups after the ai fifo overflows. Cc: <stable@vger.kernel.org> # v4.2+ Signed-off-by:
Frank Mori Hess <fmh6jj@gmail.com> Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Liu Bo authored
commit 58113753 upstream. Fstests generic/475 provides a way to fail metadata reads while checking if checksum exists for the inode inside run_delalloc_nocow(), and csum_exist_in_range() interprets error (-EIO) as inode having checksum and makes its caller enter the cow path. In case of free space inode, this ends up with a warning in cow_file_range(). The same problem applies to btrfs_cross_ref_exist() since it may also read metadata in between. With this, run_delalloc_nocow() bails out when errors occur at the two places. cc: <stable@vger.kernel.org> v2.6.28+ Fixes: 17d217fe ("Btrfs: fix nodatasum handling in balancing code") Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Eric Biggers authored
commit 8f461b1e upstream. With ecb-cast5-avx, if a 128+ byte scatterlist element followed a shorter one, then the algorithm accidentally encrypted/decrypted only 8 bytes instead of the expected 128 bytes. Fix it by setting the encryption/decryption 'fn' correctly. Fixes: c12ab20b ("crypto: cast5/avx - avoid using temporary stack buffers") Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Leonard Crestez authored
commit 6aaf49b4 upstream. The decision to rebuild .S_shipped is made based on the relative timestamps of .S_shipped and .pl files but git makes this essentially random. This means that the perl script might run anyway (usually at most once per checkout), defeating the whole purpose of _shipped. Fix by skipping the rule unless explicit make variables are provided: REGENERATE_ARM_CRYPTO or REGENERATE_ARM64_CRYPTO. This can produce nasty occasional build failures downstream, for example for toolchains with broken perl. The solution is minimally intrusive to make it easier to push into stable. Another report on a similar issue here: https://lkml.org/lkml/2018/3/8/1379Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Cc: <stable@vger.kernel.org> Reviewed-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Maciej S. Szmigiero authored
commit 0a9eb80e upstream. rsa-pkcs1pad uses a value returned from a RSA implementation max_size callback as a size of an input buffer passed to the RSA implementation for encrypt and sign operations. CCP RSA implementation uses a hardware input buffer which size depends only on the current RSA key length, so it should return this key length in the max_size callback, too. This also matches what the kernel software RSA implementation does. Previously, the value returned from this callback was always the maximum RSA key size the CCP hardware supports. This resulted in this huge buffer being passed by rsa-pkcs1pad to CCP even for smaller key sizes and then in a buffer overflow when ccp_run_rsa_cmd() tried to copy this large input buffer into a RSA key length-sized hardware input buffer. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Fixes: ceeec0af ("crypto: ccp - Add support for RSA on the CCP") Cc: stable@vger.kernel.org Acked-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
-
