- 15 Jul, 2016 13 commits
-
-
Philipp Zabel authored
We can't detect the FXEN (fiber mode) bootstrap pin, so configure it via a boolean device tree property "micrel,fiber-mode". If it is enabled, auto-negotiation is not supported. The only available modes are 100base-fx (full duplex and half duplex). Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
There is a 2 byte struct whole after line.loopback so we need to clear that out to avoid disclosing stack information. Fixes: c19b6d24 ('drivers/net: support hdlc function for QE-UCC') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
David S. Miller authored
Sowmini Varadhan says: ==================== RDS: TCP: Enable mprds for rds-tcp The third, and final, installment for mprds-tcp changes. In Patch 3 of this set, if the transport support t_mp_capable, we hash outgoing traffic across multiple paths. Additionally, even if the transport is MP capable, we may be peering with some node that does not support mprds, or supports a different number of paths. This necessitates RDS control plane changes so that both peers agree on the number of paths to be used for the rds-tcp connection. Patch 3 implements all these changes, which are documented in patch 5 of the series. Patch 1 of this series is a bug fix for a race-condition that has always existed, but is now more easily encountered with mprds. Patch 2 is code refactoring. Patches 4 and 5 are Documentation updates. ==================== Signed-off-by: -
Sowmini Varadhan authored
Document the design of mprds, covering a brief description of the motivation, data-structures and modifications to the RDS control plane. Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
Sowmini Varadhan authored
Update the documentation to describe the changes added by commit 8ba38460 ("net/rds Add getsockopt support for SO_RDS_TRANSPORT") Acked-by:
-
Sowmini Varadhan authored
Use RDS probe-ping to compute how many paths may be used with the peer, and to synchronously start the multiple paths. If mprds is supported, hash outgoing traffic to one of multiple paths in rds_sendmsg() when multipath RDS is supported by the transport. CC: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Sowmini Varadhan authored
Some code duplication in rds_tcp_reset_callbacks() can be avoided by having the function call rds_tcp_restore_callbacks() and rds_tcp_set_callbacks(). Acked-by:
-
Sowmini Varadhan authored
As the existing comments in rds_tcp_listen_data_ready() indicate, it is possible under some race-windows to get to this function with the accept() socket. If that happens, we could run into a sequence whereby thread 1 thread 2 rds_tcp_accept_one() thread sets up new_sock via ->accept(). The sk_user_data is now sock_def_readable data comes in for new_sock, ->sk_data_ready is called, and we land in rds_tcp_listen_data_ready rds_tcp_set_callbacks() takes the sk_callback_lock and sets up sk_user_data to be the cp read_lock sk_callback_lock ready = cp unlock sk_callback_lock page fault on ready In the above sequence, we end up with a panic on a bad page reference when trying to execute (*ready)(). Instead we need to call sock_def_readable() safely, which is what this patch achieves. Acked-by:
-
Arnd Bergmann authored
Including devlink.h on ARM and probably other 32-bit architectures results in a harmless warning: In file included from ../include/trace/define_trace.h:95:0, from ../include/trace/events/devlink.h:51, from ../net/core/devlink.c:30: include/trace/events/devlink.h: In function 'trace_raw_output_devlink_hwmsg': include/trace/events/devlink.h:42:12: error: format '%lu' expects argument of type 'long unsigned int', but argument 10 has type 'size_t {aka unsigned int}' [-Werror=format=] The correct format string for 'size_t' is %zu, not %lu, this works on all architectures. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Fixes: e5224f0f ("devlink: add hardware messages tracing facility") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Jiri Pirko authored
Turned on that driver->owner which is struct module is not available when modules are disabled. Better to depend on a driver name which is always available. Reported-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Christophe Jaillet authored
'vr' should be a valid pointer here, so returning 'PTR_ERR(vr)' is wrong. Return an explicit error code (-ENOENT) instead. Fixes: 61c503f9 ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
-
Philippe Reynes authored
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
-
Philippe Reynes authored
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by:
-
- 14 Jul, 2016 27 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2016-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.8 Major changes: iwlwifi * more work on the RX path for the 9000 device series * some more dynamic queue allocation work * SAR BIOS implementation * some work on debugging capabilities * added support for GCMP encryption * data path rework in preparation for new HW * some cleanup to remove transport dependency on mac80211 * support for MSIx in preparation for new HW * lots of work in preparation for HW support (9000 and a000 series) mwifiex * implement get_tx_power and get_antenna cfg80211 operation callbacks wl18xx * add support for 64bit clock rtl8xxxu * aggregation support (optional for now) Also wireless-drivers is merged to fix some conflicts. ==================== Signed-off-by:
-
David S. Miller authored
Jesper Dangaard Brouer says: ==================== pktgen samples: new scripts and removing older samples This patchset is adding some pktgen sample scripts that I've been using for a while[1], and they seams to relevant for more people. Patchset also remove some of the older style pktgen samples. [1] https://github.com/netoptimizer/network-testing/tree/master/pktgen ==================== Signed-off-by:
-
Jesper Dangaard Brouer authored
Removing the pktgen sample script pktgen.conf-1-1-rdos, because it does not contain anything that is not covered by the other and newer style sample scripts. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
This pktgen sample script is useful for scalability testing a receiver. The script will simply generate one flow per thread (option -t N) using the thread number as part of the source IP-address. The single flow sample (pktgen_sample03_burst_single_flow.sh) have become quite popular, but it is important that developers also make sure to benchmark scalability of multiple receive queues. Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Jesper Dangaard Brouer authored
Adding a pktgen sample script that demonstrates how to use pktgen for simulating flows. Script will generate a certain number of concurrent flows ($FLOWS) and each flow will contain $FLOWLEN packets, which will be send back-to-back, before switching to a new flow, due to flag FLOW_SEQ. This script obsoletes the old sample script 'pktgen.conf-1-1-flows', which is removed. Signed-off-by:
-
David S. Miller authored
Saeed Mahameed says: ==================== Mellanox 100G mlx5 Bulk flow statistics and SRIOV TC offloads This series from Amir and Or deals with two enhancements for the mlx5 TC offloads. The 1st two patches add bulk reading of flow counters. Few bulk counter queries are used instead of issuing thousands firmware commands per second to get statistics of all flows set to HW. The next patches add TC based SRIOV offloading to mlx5, as a follow up for the e-switch offloads mode and the VF representors. When the e-switch is set to the (new) "offloads" mode, we can now offload TC/flower drop and forward rules, the forward action we offload is TC mirred/redirect. The above is done by the VF representor netdevices exporting the setup_tc ndo where from there we're re-using and enhancing the existing mlx5 TC offloads sub-module which now works for both the NIC and the SRIOV cases. The series is applied on top b38a75d2 ('mlxsw: core: Trace EMAD messages') and it has no merge issues with the on-going net submission ('mlx5 tx timeout watchdog fixes') V2: - Fixed compilation warning. ==================== Signed-off-by:
-
Or Gerlitz authored
The VF representors support only TC filter/action offloads (not mqprio) and this is enabled for them by default. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Or Gerlitz authored
Enhance the TC offload code such that when the eswitch exists and it's mode being SRIOV offloads, we do TC actions parsing and setup targeted for eswitch. Next, we add the offloaded flow to the HW e-switch (fdb). Signed-off-by:
-
Or Gerlitz authored
Add the setup code that parses the TC actions needed to support offloading drop and mirred/redirect for SRIOV e-switch. We can redirect between two devices if they belong to the same HW switch, compare the switchdev HW ID attribute to enforce that. Signed-off-by:
-
Or Gerlitz authored
This helper serves to know if two switchdev port netdevices belong to the same HW ASIC, e.g to figure out if forwarding offload is possible between them. Signed-off-by:
-
Or Gerlitz authored
Towards reusing the TC offloads code for an SRIOV use-case, change some of the helper functions to have _nic in their names so it's clear what's NIC unique and what's general. Also group together the NIC related helpers so we can easily branch per the use-case in downstream patch. Signed-off-by:
-
Or Gerlitz authored
This allows for upper levels in the driver, e.g the TC offload code to add e-switch offloaded steering rules. The caller provides the rule spec for matching, action, source and destination vports. Signed-off-by:
-
Or Gerlitz authored
In the offloads mode, some slow path rules are added by the driver (e.g send-to-vport), while offloaded rules are to be added from upper layers. The slow path rules have lower priority and we don't want matching on offloaded rules to suffer from extra steering hops related to the slow path rules. We use two priorities, one for offloaded rules (fast path), and one for the control rules (slow path). To allow for that, we enable two priorities for the FDB namespace in the FS core code. Signed-off-by:
-
Or Gerlitz authored
Currenly, the code that programs the flow actions into the firmware doesn't check if was actually asked to offload the statistics, fix that. Fixes: aad7e08d ('net/mlx5e: Hardware offloaded flower filter statistics support') Signed-off-by:
-
Amir Vadai authored
This commit utilize the ability of ConnectX-4 to bulk read flow counters. Few bulk counter queries could be done instead of issuing thousands of firmware commands per second to get statistics of all flows set to HW, such as those programmed when we offload tc filters. Counters are stored sorted by hardware id, and queried in blocks (id + number of counters). Due to hardware requirement, start of block and number of counters in a block must be four aligned. Reviewed-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
-
Amir Vadai authored
In order to use bulk counters, we need to have counters sorted by id. Signed-off-by:
-
David S. Miller authored
Elad Kanfi says: ==================== Code style fixes Fix all checkpatch warnings and errors, and reuse code ==================== Signed-off-by: -
Elad Kanfi authored
Add inline function that checks if there is a pending tx packet. Signed-off-by:
Elad Kanfi <eladkan@mellanox.com> Signed-off-by:
-
Elad Kanfi authored
Fix following coding style problems : ERROR: else should follow close brace '}' + } + else { /* !dst_is_aligned */ WARNING: Missing a blank line after declarations + u32 buf = nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF); + put_unaligned_be32(buf, reg); WARNING: Missing a blank line after declarations + u32 buf; + ioread32_rep(priv->regs_base + NPS_ENET_REG_RX_BUF, &buf, 1); CHECK: Blank lines aren't necessary before a close brace '}' + + } total: 1 errors, 2 warnings, 1 checks, 683 lines checked Signed-off-by: -
David S. Miller authored
Marcelo Ricardo Leitner says: ==================== sctp: allow GSO frags to access the chunk too Patchset is named after the most important fix in it. First two patches are preparing the grounds for the 3rd patch. After the 3rd, they are not strictly logically related to the patchset, but I kept them together as they depend on each other. More details on patch changelogs. ==================== Signed-off-by: -
Marcelo Ricardo Leitner authored
Currently only read-only checks are performed up to the point on where we check if peer is ECN capable, checks which we can avoid otherwise. The flag ecn_ce_done is only used to perform this check once per incoming packet, and nothing more. Thus this patch moves the peer check up. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
We should not clear that flag when switching to a new skb from a GSO skb because it would cause ECN processing to happen multiple times per GSO skb, which is not wanted. Instead, let it be processed once per chunk. That is, in other words, once per IP header available. Fixes: 90017acc ("sctp: Add GSO support") Signed-off-by:
-
Marcelo Ricardo Leitner authored
Identifying address family operations during rx path is not something expensive but it's ugly to the eye to have it done multiple times, specially when we already validated it during initial rx processing. This patch takes advantage of the now shared sctp_input_cb and make the pointer to the operations readily available. Signed-off-by:
-
Marcelo Ricardo Leitner authored
SCTP will try to access original IP headers on sctp_recvmsg in order to copy the addresses used. There are also other places that do similar access to IP or even SCTP headers. But after 90017acc ("sctp: Add GSO support") they aren't always there because they are only present in the header skb. SCTP handles the queueing of incoming data by cloning the incoming skb and limiting to only the relevant payload. This clone has its cb updated to something different and it's then queued on socket rx queue. Thus we need to fix this in two moments. For rx path, not related to socket queue yet, this patch uses a partially copied sctp_input_cb to such GSO frags. This restores the ability to access the headers for this part of the code. Regarding the socket rx queue, it removes iif member from sctp_event and also add a chunk pointer on it. With these changes we're always able to reach the headers again. The biggest change here is that now the sctp_chunk struct and the original skb are only freed after the application consumed the buffer. Note however that the original payload was already like this due to the skb cloning. For iif, SCTP's IPv4 code doesn't use it, so no change is necessary. IPv6 now can fetch it directly from original's IPv6 CB as the original skb is still accessible. In the future we probably can simplify sctp_v*_skb_iif() stuff, as sctp_v4_skb_iif() was called but it's return value not used, and now it's not even called, but such cleanup is out of scope for this change. Fixes: 90017acc ("sctp: Add GSO support") Signed-off-by:
-
Marcelo Ricardo Leitner authored
The next patch needs 8 bytes in there. sctp_ulpevent has a hole due to bad alignment; msg_flags is using 4 bytes while it actually uses only 2, so we shrink it, and iif member (4 bytes) which can be easily fetched from another place once the next patch is there, so we remove it and thus creating space for 8 bytes. Signed-off-by:
-
Marcelo Ricardo Leitner authored
We process input path in other files too and having access to it is nice, so move it to a header where it's shared. Signed-off-by:
-
Wei Yongjun authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
