- 17 Sep, 2015 33 commits
-
-
Alexander Aring authored
This patch changes the return value of lowpan packet receive handler to the correct NET_RX_DROP instead RX_DROP. This issue was detected by sparse and reported from Marcel: net/ieee802154/6lowpan/rx.c:329:32: expected int net/ieee802154/6lowpan/rx.c:329:32: got restricted lowpan_rx_result ... Reported-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
-
Alexander Aring authored
This patch removes a workaround for datagram_size calculation while doing fragmentation on transmit. Reviewed-by:
Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by:
-
Alexander Aring authored
This patch remove the packet_type to host and leave the mac pkt_type. By running 'grep -r "pkt_type" net/ipv6', the IPv6 stack will evaluate this value for PACKET_BROADCAST. Instead of overwriting this value we will leave the mac value there which is broadcasts if the mac frame was a broadcast frame. Reviewed-by:
-
Alexander Aring authored
This patch adds frame control checks to check if the received frame is something which could contain a 6LoWPAN packet. Reviewed-by:
-
Alexander Aring authored
This patch adds checks for reserved dispatch value. When we have a reserved dispatch value we should drop the skb immediately. Reviewed-by:
-
Alexander Aring authored
This patch adds dummy handlers for all known IEEE 802.15.4 dispatch values which prints a warning that we don't support these dispatches right now. Also we add a warning to the RX_CONTINUE case inside of lowpan_rx_handlers_result which should now never happend. Reviewed-by:
-
Alexander Aring authored
This patch introduce an earlier check if a 6LoWPAN frame can be valid. This contains at first for checking if the header contains a dispatch byte and isn't the nalp dispatch value, which means it isn't a 6LoWPAN packet. Also we add a check if we can derference the dispatch value by checking if skb->len is unequal zero. Reviewed-by:
-
Alexander Aring authored
This patch complete reworks the evaluation of 6lowpan dispatch value by introducing a receive handler mechanism for each dispatch value. A list of changes: - Doing uncompression on-the-fly when FRAG1 is received, this require some special handling for 802.15.4 lltype in generic 6lowpan branch for setting the payload length correct. - Fix dispatch mask for fragmentation. - Add IPv6 dispatch evaluation for FRAG1. - Add skb_unshare for dispatch which might manipulate the skb data buffer. Cc: Jukka Rissanen <jukka.rissanen@linux.intel.com> Reviewed-by:
-
Alexander Aring authored
We should change the skb->dev pointer earlier to the lowpan interface Sometimes we call iphc_decompress which also use some netdev printout functionality. This patch will change that the correct interface will be displayed in this case, which should be the lowpan interface. Reviewed-by:
-
Alexander Aring authored
This patch moves some trivial checks at first before calling skb_share_check which could do some memcpy if the buffer is shared. Reviewed-by:
-
Alexander Aring authored
This patch cleanups the pull of the iphc bytes. We don't need to check if the skb->len contains two bytes, this will be checked by lowpan_fetch_skb_u8. Reviewed-by:
-
Alexander Aring authored
We don't need to check if the wpan interface is running because the lowpan_rcv is the packet layer receive handler for the wpan interface. Instead doing a check if wpan interface is running we should check if the lowpan interface is running before starting 6lowpan adaptation layer. Reviewed-by:
-
Alexander Aring authored
This function is used internally inside of ieee802154 6lowpan module only and not outside of any other module. We don't need to export this function then. Reviewed-by:
-
Alexander Aring authored
Internal mechanism by calling netdev_alloc which use kzalloc already sets these variables to zero. This patch cleanup the setup of net_device. Reviewed-by:
-
Alexander Aring authored
This patch removes one check on null which should be already done by checking before for ARPHRD_IEEE802154. All ARPHRD_IEEE802154 and ARPHRD_IEEE802154_MONITOR should have wdev->ieee802154_ptr, where ARPHRD_IEEE802154 is currently a node interface only. Reviewed-by:
-
Alexander Aring authored
This patch moves the open count handling while doing open of a lowpan interface. We need the packet handler register at first when one lowpan interface is up. There exists a small case when all lowpan interfaces are down and the 802154 packet layer is still registered. To reduce some overhead we will register the packet layer when the first lowpan interface comes up and unregister when the last interface will become down. Reviewed-by:
-
Alexander Aring authored
Inside the IEEE 802.15.4 6LoWPAN subsystem we use two interfaces which are wpan and lowpan interfaces. Instead of using always the variable name "dev" for both we rename the "dev" variable to wdev which means the wpan net_device and ldev which means a lowpan net_device. This avoids confusing and always looking back to see which net_device is meant by the variable name "dev". Reviewed-by:
-
Kieran Bingham authored
if btmrvl_tx_pkt() is called, and the branch if (skb_headroom(skb) < BTM_HEADER_LEN) evaluates positive, a new skb is allocated via skb_realloc_headroom. The original skb is stored in a tmp variable, before being free'd. However on success, the new skb, is not free'd, nor is it returned to the caller which will then double-free the original skb. This issue exists from the original driver submission in commit: #132ff4e5 If this code path had been alive, it would have been noted from the double-free causing a panic. All skb's here should be allocated through bt_skb_alloc which adds 8 bytes as headroom, which is plenty against the 4 bytes pushed on by this driver. This code path is dead, and buggy at the same time, so the cleanest approach is to remove the affected branch. Reported by coverity (CID 113422) Signed-off-by:
Kieran Bingham <kieranbingham@gmail.com> Signed-off-by:
-
Simon Fels authored
With 9380f9ea the order of unsetting the HCI_USER_CHANNEL flag of the HCI device was reverted to ensure the device is first closed before making it available again. Due to hci_dev_close checking for HCI_USER_CHANNEL being set on the device it was never really closed and was kept opened. We're now calling hci_dev_do_close directly to make sure the device is correctly closed and we keep the correct order to unset the flag on our device object. Signed-off-by:
Simon Fels <simon.fels@canonical.com> Signed-off-by:
-
Loic Poulain authored
Don't hide this packet size error. Signed-off-by:
Loic Poulain <loic.poulain@intel.com> Signed-off-by:
-
Loic Poulain authored
Implement runtime PM suspend/resume callbacks. If LPM supported, controller is put into supsend after a delay of inactivity (1s). Inactivity is based on LPM idle notification and host TX traffic. Signed-off-by:
-
Loic Poulain authored
Add PM suspend/resume callbacks which call lpm_suspend/resume. Add LPM ack in threaded IRQ handler to notify the controller that resume is complete. Protect hci_uart against concurrent removing during suspend/resume. Signed-off-by:
-
Loic Poulain authored
Add LPM PM suspend/resume/host_wake LPM functions. A LPM transaction is composed with a LPM request and ack/response. Host can send a LPM suspend/resume request to the controller which should respond with a LPM ack. If resume is requested by the controller (irq), host has to send a LPM ack once resumed. Signed-off-by:
-
Frederic Danis authored
Replace BT_ logging calls by the new bt_dev ones. Signed-off-by:
Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by:
-
Frederic Danis authored
Replace spinlock by mutex to be able to use bcm_device_lock in sleepable context like devm_request_threaded_irq or upcomming PM support. Signed-off-by:
-
Marcel Holtmann authored
Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com>
-
Loic Poulain authored
Replace the device_intel list spinlock with a mutex. devm_request_threaded_irq is not atomic and upcomming PM support should be simpler. Signed-off-by:
-
Loic Poulain authored
Replace BT_ logging calls by the new bt_dev ones. Signed-off-by:
-
Loic Poulain authored
Enable controller Low-Power-Mode if we have a pdev to manage host wake-up. Once LPM is enabled, controller notifies its TX status via a vendor specific packet (tx_idle/tx_active). tx_active means that there is more data upcoming from controller. tx_idle means that controller can be put in suspended state. Signed-off-by:
-
Loic Poulain authored
An IRQ can be retrieved from the pdev resources. This irq will be used in case of LPM suspend mode to wake-up the host and resume the link. This resource can be declared as a GPIO-Interrupt which requires to be converted into IRQ. Signed-off-by:
-
Loic Poulain authored
Add specific bluetooth device logging macros since hci device name is repeatedly referred in bluetooth subsystem logs. Signed-off-by:
-
Johan Hedberg authored
Controllers claiming to be CSR with LMP subversion 0x0c5c don't actually seem to be authentic CSR controllers. They also don't have their USB bcdDevice value matching the LMP subversion like all other CSR controllers: HCI: > HCI Event: Command Complete (0x0e) plen 12 Read Local Version Information (0x04|0x0001) ncmd 1 Status: Success (0x00) HCI version: Bluetooth 2.0 (0x03) - Revision 3164 (0x0c5c) LMP version: Bluetooth 2.0 (0x03) - Subversion 3164 (0x0c5c) Manufacturer: Cambridge Silicon Radio (10) USB: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=16 #Cfgs= 1 P: Vendor=0a12 ProdID=0001 Rev= 1.34 C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms These controllers also have the HCI_Read_Stored_Link_Key command broken so it's important the right quirk is set for them. Reported-and-tested-by:Rhobison Alves Pereira <rhobison@hotmail.com> Signed-off-by:
-
Johan Hedberg authored
Some counterfeit CSR controllers also have broken behavior with the HCI_Read_Stored_Link_Key command: < HCI Command: Read Stored Link Key (0x03|0x000d) plen 7 Address: 00:00:00:00:00:00 (OUI 00-00-00) Read all: 0x01 > HCI Event: Command Complete (0x0e) plen 8 Read Stored Link Key (0x03|0x000d) ncmd 1 Status: Unsupported Feature or Parameter Value (0x11) Max num keys: 0 Num keys: 0 Extend the existing HCI_QUIRK_BROKEN_STORED_LINK_KEY to be also used for this HCI command. Reported-and-tested-by:
-
- 16 Sep, 2015 2 commits
-
-
Randy Dunlap authored
Fix build error caused by missing Kconfig dependency: ERROR: "cdc_parse_cdc_header" [drivers/net/usb/cdc-phonet.ko] undefined! Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 15 Sep, 2015 5 commits
-
-
Sowmini Varadhan authored
Many commonly used functions like getifaddrs() invoke RTM_GETLINK to dump the interface information, and do not need the the AF_INET6 statististics that are always returned by default from rtnl_fill_ifinfo(). Computing the statistics can be an expensive operation that impacts scaling, so it is desirable to avoid this if the information is not needed. This patch adds a the RTEXT_FILTER_SKIP_STATS extended info flag that can be passed with netlink_request() to avoid statistics computation for the ifinfo path. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
David S. Miller authored
In file included from drivers/usb/gadget/function/u_serial.h:16:0, from drivers/usb/gadget/function/f_acm.c:23: >> include/linux/usb/cdc.h:47:5: warning: 'struct usb_interface' declared inside parameter list int buflen); ^ >> include/linux/usb/cdc.h:47:5: warning: its scope is only this definition or declaration, which is probably not what you want Reported-by: -
Joe Perches authored
The code around the allocation and loops are a bit obfuscated. Neaten it by using: o kcalloc with decimal count and sizeof(u32) o Decimal loop indexing and i++ not i += 4 o A promiscuous block using a similar style to the multicast block o Remove unnecessary variables Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
David S. Miller authored
Iyappan Subramanian says: ==================== driver: net: xgene: Enable 2nd 10GbE port on APM X-Gene SoC This patch adds support for 2nd 10GbE on APM X-Gene SoC ==================== Signed-off-by: -
Iyappan Subramanian authored
Adding the second 10GbE dt node for APM X-Gene SoC device tree Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Signed-off-by:
-
