- 06 Feb, 2015 40 commits
-
-
Jeremiah Mahler authored
commit 13f3fbe8 upstream. commit 6dda730e Author: Jani Nikula <jani.nikula@intel.com> Date: Tue Jun 24 18:27:40 2014 +0300 drm/i915: respect the VBT minimum backlight brightness introduced a bug which resulted in inconsistent brightness levels on different machines. If a suspended was entered with the screen off some machines would resume with the screen at minimum brightness and others at maximum brightness. The following commands can be used to produce this behavior. xset dpms force off sleep 1 sudo systemctl suspend (resume ...) The root cause of this problem is a comparison which checks to see if the backlight level is zero when the panel is enabled. If it is zero, it is set to the maximum level. Unfortunately, not all machines have a minimum level of zero. On those machines the level is left at the minimum instead of begin set to the maximum. Fix the bug by updating the comparison to check for the minimum backlight level instead of zero. Also, expand the comparison for the possible case when the level is less than the minimum. Fixes: 6dda730e ("respect the VBT minimum backlight brightness") Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Woodhouse authored
commit f48a0165 upstream. Commit 82460d97 ("drm/i915: Rework ppgtt init to no require an aliasing ppgtt") introduced a regression on Broadwell, triggering the following IOMMU fault at startup: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem dmar: DRHD: handling fault status reg 2 dmar: DMAR:[DMA Write] Request device [00:02.0] fault addr 880000 DMAR:[fault reason 23] Unknown fbcon: inteldrmfb (fb0) is primary device Further commentary from Daniel: I sugggested this change to David after staring at the offending patch for a while. I have no idea and theory whatsoever why this would upset the gpu less than the other way round. But it seems to work. David promised to chase hw people a bit more to get a more meaningful answer. Wrt the comment that this deletes: I've done some digging and afaict loading context before ppgtt enable was once required before our recent restructuring of the context/ppgtt init code: Before that context sw setup (i.e. allocating the default context) and hw setup was smashed together. Also the setup of the default context was the bit that actually allocated the aliasing ppgtt structures. Which is the reason for the context before ppgtt depency. Or was, since with all the untangling there's no no real depency any more (functional, who knows what the hw is doing), so the comment is just stale. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rodrigo Vivi authored
commit 6b96d705 upstream. BDW with PCI-IDs ended in "2" aren't ULT, but HALO. Let's fix it and at least allow VGA to work on this units. v2: forgot ammend and v1 doesn't compile Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87220 Cc: Xion Zhang <xiong.y.zhang@intel.com> Cc: Guo Jinxian <jinxianx.guo@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bob Paauwe authored
commit af1a7301 upstream. When creating a fence for a tiled object, only fence the area that makes up the actual tiles. The object may be larger than the tiled area and if we allow those extra addresses to be fenced, they'll get converted to addresses beyond where the object is mapped. This opens up the possiblity of writes beyond the end of object. To prevent this, we adjust the size of the fence to only encompass the area that makes up the actual tiles. The extra space is considered un-tiled and now behaves as if it was a linear object. Testcase: igt/gem_tiled_fence_overflow Reported-by: Dan Hettena <danh@ghs.com> Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rob Clark authored
commit 2148f18f upstream. VT switch back/forth from console to xserver (for example) has potential to go horribly wrong if a dynamic DP MST connector ends up in the saved modeset that is restored when switching back to fbcon. When removing a dynamic connector, don't forget to clean up the saved state. v1: original v2: null out set->fb if no more connectors to avoid making i915 cranky Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1184968Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mugunthan V N authored
commit 02a54164 upstream. In Dual EMAC, the default VLANs are used to segregate Rx packets between the ports, so adding the same default VLAN to the switch will affect the normal packet transfers. So returning error on addition of dual EMAC default VLANs. Even if EMAC 0 default port VLAN is added to EMAC 1, it will lead to break dual EMAC port separations. Fixes: d9ba8f9e (driver: net: ethernet: cpsw: dual emac interface implementation) Reported-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ashay Jaiswal authored
commit 83b0302d upstream. The regulator framework maintains a list of consumer regulators for a regulator device and protects it from concurrent access using the regulator device's mutex lock. In the case of regulator_put() the consumer is removed and regulator device's parameters are updated without holding the regulator device's mutex. This would lead to a race condition between the regulator_put() and any function which traverses the consumer list or modifies regulator device's parameters. Fix this race condition by holding the regulator device's mutex in case of regulator_put. Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrey Ryabinin authored
commit 45cd15e6 upstream. Array of platform_device_id elements should be terminated with empty element. Fixes: 5bccae6e ("rtc: s5m-rtc: add real-time clock driver for s5m8767") Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mika Westerberg authored
commit c957e8f0 upstream. Once the current message is finished, the driver notifies SPI core about this by calling spi_finalize_current_message(). This function queues next message to be transferred. If there are more messages in the queue, it is possible that the driver is asked to transfer the next message at this point. When spi_finalize_current_message() returns the driver clears the drv_data->cur_chip pointer to NULL. The problem is that if the driver already started the next message clearing drv_data->cur_chip will cause NULL pointer dereference which crashes the kernel like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 IP: [<ffffffffa0022bc8>] cs_deassert+0x18/0x70 [spi_pxa2xx_platform] PGD 78bb8067 PUD 37712067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 11 Comm: ksoftirqd/1 Tainted: G O 3.18.0-rc4-mjo #5 Hardware name: Intel Corp. VALLEYVIEW B3 PLATFORM/NOTEBOOK, BIOS MNW2CRB1.X64.0071.R30.1408131301 08/13/2014 task: ffff880077f9f290 ti: ffff88007a820000 task.ti: ffff88007a820000 RIP: 0010:[<ffffffffa0022bc8>] [<ffffffffa0022bc8>] cs_deassert+0x18/0x70 [spi_pxa2xx_platform] RSP: 0018:ffff88007a823d08 EFLAGS: 00010202 RAX: 0000000000000008 RBX: ffff8800379a4430 RCX: 0000000000000026 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff8800379a4430 RBP: ffff88007a823d18 R08: 00000000ffffffff R09: 000000007a9bc65a R10: 000000000000028f R11: 0000000000000005 R12: ffff880070123e98 R13: ffff880070123de8 R14: 0000000000000100 R15: ffffc90004888000 FS: 0000000000000000(0000) GS:ffff880079a80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000048 CR3: 000000007029b000 CR4: 00000000001007e0 Stack: ffff88007a823d58 ffff8800379a4430 ffff88007a823d48 ffffffffa0022c89 0000000000000000 ffff8800379a4430 0000000000000000 0000000000000006 ffff88007a823da8 ffffffffa0023be0 ffff88007a823dd8 ffffffff81076204 Call Trace: [<ffffffffa0022c89>] giveback+0x69/0xa0 [spi_pxa2xx_platform] [<ffffffffa0023be0>] pump_transfers+0x710/0x740 [spi_pxa2xx_platform] [<ffffffff81076204>] ? pick_next_task_fair+0x744/0x830 [<ffffffff81049679>] tasklet_action+0xa9/0xe0 [<ffffffff81049a0e>] __do_softirq+0xee/0x280 [<ffffffff81049bc0>] run_ksoftirqd+0x20/0x40 [<ffffffff810646df>] smpboot_thread_fn+0xff/0x1b0 [<ffffffff810645e0>] ? SyS_setgroups+0x150/0x150 [<ffffffff81060f9d>] kthread+0xcd/0xf0 [<ffffffff81060ed0>] ? kthread_create_on_node+0x180/0x180 [<ffffffff8187a82c>] ret_from_fork+0x7c/0xb0 Fix this by clearing drv_data->cur_chip before we call spi_finalize_current_message(). Reported-by: Martin Oldfield <m@mjoldfield.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michel Dänzer authored
commit 5636d2f8 upstream. The GART table BO has to be moved out of VRAM for suspend/resume. Any updates to the GART table during that time were silently dropped without this change. This caused GPU lockups on resume in some cases, see the bug reports referenced below. This might also make GPU reset more robust in some cases, as we no longer rely on the GART table in VRAM being preserved across the GPU lockup/reset. v2: Add logic to radeon_gart_table_vram_pin directly instead of reinstating radeon_gart_restore v3: Move code after assignment of rdev->gart.table_addr so that the GART TLB flush can work as intended, add code comment explaining why we're doing this Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85204 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86267Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michel Dänzer authored
commit cb658906 upstream. get_page_entry calculates the GART page table entry, which is just written to the GART page table by set_page_entry. This is a prerequisite for the following fix. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Hellstrom authored
commit 496eb6fd upstream. Fixes a case where we call vmw_fifo_idle() from within a wait function with task state !TASK_RUNNING, which is illegal. In addition, make the locking fine-grained, so that it is performed once for every read- and write operation. This is of course more costly, but we don't perform much register access in the timing critical paths anyway. Instead we have the extra benefit of being sure that we don't forget the hw lock around register accesses. I think currently the kms code was quite buggy w r t this. This fixes Red Hat Bugzilla Bug 1180796 Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joe Thornber authored
commit 766a7888 upstream. Commit 9b1cc9f2 ("dm cache: share cache-metadata object across inactive and active DM tables") mistakenly ignored the use of ERR_PTR returns. Restore missing IS_ERR checks and ERR_PTR returns where appropriate. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joe Thornber authored
commit 2a7eaea0 upstream. You can't modify the metadata in these modes. It's better to fail these messages immediately than let the block-manager deny write locks on metadata blocks. Otherwise these failed metadata changes will trigger 'needs_check' to get set in the metadata superblock -- requiring repair using the thin_check utility. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Petazzoni authored
commit dcad6887 upstream. Since commit f2c3c67f (merge commit that adds commit "ARM: mvebu: completely disable hardware I/O coherency"), we disable I/O coherency on Armada EBU platforms. However, we continue to initialize the coherency fabric, because this coherency fabric is needed on Armada XP for inter-CPU coherency. Unfortunately, due to this, we also continued to execute the coherency fabric initialization code for Armada 375/38x, which switched the PL310 into I/O coherent mode. This has the effect of disabling the outer cache sync operation: this is needed when I/O coherency is enabled to work around a PCIe/L2 deadlock. But obviously, when I/O coherency is disabled, having the outer cache sync operation is crucial. Therefore, this commit fixes the armada_375_380_coherency_init() so that the PL310 is switched to I/O coherent mode only if I/O coherency is enabled. Without this fix, all devices using DMA are broken on Armada 375/38x. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jean-Christophe PLAGNIOL-VILLARD authored
commit a0b957f3 upstream. Today we expect that all the bank are enabled, and count the number of banks used by the pinctrl based on it instead of using the last bank id enabled. So switch to it, set the chained IRQ at runtime based on enabled banks and wait only the number of enabled gpio controllers at probe time. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johannes Berg authored
commit 0fa7b391 upstream. In case userspace attempts to obtain key information for or delete a unicast key, this is currently erroneously rejected unless the driver sets the WIPHY_FLAG_IBSS_RSN flag. Apparently enough drivers do so it was never noticed. Fix that, and while at it fix a potential memory leak: the error path in the get_key() function was placed after allocating a message but didn't free it - move it to a better place. Luckily admin permissions are needed to call this operation. Fixes: e31b8213 ("cfg80211/mac80211: allow per-station GTKs") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Luciano Coelho authored
commit 2af81d67 upstream. In normal cases (i.e. when we are fully associated), cfg80211 takes care of removing all the stations before calling suspend in mac80211. But in the corner case when we suspend during authentication or association, mac80211 needs to roll back the station states. But we shouldn't roll back the station states in the suspend function, because this is taken care of in other parts of the code, except for WDS interfaces. For AP types of interfaces, cfg80211 takes care of disconnecting all stations before calling the driver's suspend code. For station interfaces, this is done in the quiesce code. For WDS interfaces we still need to do it here, so move the code into a new switch case for WDS. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathy Vanhoef authored
commit 3a5c5e81 upstream. Fix a regression introduced by commit a5e70697 ("mac80211: add radiotap flag and handling for 5/10 MHz") where the IEEE80211_CHAN_CCK channel type flag was incorrectly replaced by the IEEE80211_CHAN_OFDM flag. This commit fixes that by using the CCK flag again. Fixes: a5e70697 ("mac80211: add radiotap flag and handling for 5/10 MHz") Signed-off-by: Mathy Vanhoef <vanhoefm@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Trond Myklebust authored
commit 3175e1dc upstream. If we start state recovery on a client that failed to initialise correctly, then we are very likely to Oops. Reported-by: "Mkrtchyan, Tigran" <tigran.mkrtchyan@desy.de> Link: http://lkml.kernel.org/r/130621862.279655.1421851650684.JavaMail.zimbra@desy.deSigned-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peng Tao authored
commit ee8a1a8b upstream. We only support swap file calling nfs_direct_IO. However, application might be able to get to nfs_direct_IO if it toggles O_DIRECT flag during IO and it can deadlock because we grab inode->i_mutex in nfs_file_direct_write(). So return 0 for such case. Then the generic layer will fall back to buffer IO. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jochen Hein authored
commit 1d90d6d5 upstream. Without this the aux port does not get detected, and consequently the touchpad will not work. With this patch the touchpad is detected: $ dmesg | grep -E "(SYN|i8042|serio)" pnp 00:03: Plug and Play ACPI device, IDs SYN1d22 PNP0f13 (active) i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800, board id: 2863, fw id: 1473085 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 dmidecode excerpt for this laptop is: Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Medion Product Name: Akoya E7225 Version: 1.0 Signed-off-by: Jochen Hein <jochen@jochen.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rainer Koenig authored
commit 47c1ffb2 upstream. Add two more Fujitsu LIFEBOOK models that also ship with the Elantech touchpad and don't work with crc_disabled to the quirk list. Signed-off-by: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Hutterer authored
commit 8543cf1c upstream. LEN0037 found in the Lenovo ThinkPad X1 Carbon 2nd (2014 model) Reported-and-tested-by: Bjoern Olausson <bjoern@olausson.de> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Osmialowski authored
commit 34e81ad5 upstream. This patch solves deadlock between clock prepare mutex and regmap mutex reported by Tomasz Figa in [1] by implementing solution from [2]: "always leave the clock of the i2c controller in a prepared state". [1] https://lkml.org/lkml/2014/7/2/171 [2] https://lkml.org/lkml/2014/7/2/207 On each i2c transfer handled by s3c24xx_i2c_xfer(), clk_prepare_enable() was called, which calls clk_prepare() then clk_enable(). clk_prepare() takes prepare_lock mutex before proceeding. Note that i2c transfer functions are invoked from many places in kernel, typically with some other additional lock held. It may happen that function on CPU1 (e.g. regmap_update_bits()) has taken a mutex (i.e. regmap lock mutex) then it attempts i2c communication in order to proceed (so it needs to obtain clock related prepare_lock mutex during transfer preparation stage due to clk_prepare() call). At the same time other task on CPU0 wants to operate on clock (e.g. to (un)prepare clock for some other reason) so it has taken prepare_lock mutex. CPU0: CPU1: clk_disable_unused() regulator_disable() clk_prepare_lock() map->lock(map->lock_arg) regmap_read() s3c24xx_i2c_xfer() map->lock(map->lock_arg) clk_prepare_lock() Implemented solution from [2] leaves i2c clock prepared. Preparation is done in s3c24xx_i2c_probe() function. Without this patch, it is immediately unprepared by clk_disable_unprepare() call. I've replaced this call with clk_disable() and I've added clk_unprepare() call in s3c24xx_i2c_remove(). The s3c24xx_i2c_xfer() function now uses clk_enable() instead of clk_prepare_enable() (and clk_disable() instead of clk_unprepare_disable()). Signed-off-by: Paul Osmialowski <p.osmialowsk@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
commit 8a870880 upstream. Like some other uas devices these devices hang when a report-opcodes scsi command is send to them. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1124119Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Nezhevenko authored
commit bf5c4136 upstream. It looks like FUA support is broken on JMicron 152d:2566 bridge: [223159.885704] sd 7:0:0:0: [sdc] Write Protect is off [223159.885706] sd 7:0:0:0: [sdc] Mode Sense: 47 00 10 08 [223159.885942] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [223283.691677] sd 7:0:0:0: [sdc] [223283.691680] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [223283.691681] sd 7:0:0:0: [sdc] [223283.691682] Sense Key : Illegal Request [current] [223283.691684] sd 7:0:0:0: [sdc] [223283.691685] Add. Sense: Invalid field in cdb [223283.691686] sd 7:0:0:0: [sdc] CDB: [223283.691687] Write(10): 2a 08 15 d0 83 0d 00 00 01 00 [223283.691690] blk_update_request: critical target error, dev sdc, sector 2927892584 This patch adds blacklist flag so that sd will not use FUA Signed-off-by: Dmitry Nezhevenko <dion@dion.org.ua> Cc: Phil Dibowitz <phil@ipom.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Macpaul Lin authored
commit e5dff0e8 upstream. OTG device shall support this device for allowing compliance automated testing. The modification is derived from Pavankumar and Vijayavardhans' previous work. Signed-off-by: Macpaul Lin <macpaul@gmail.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Vijayavardhan Vennapusa <vvreddy@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ilya Dryomov authored
commit ae43e9d0 upstream. The comment for rbd_dev_parent_get() said * We must get the reference before checking for the overlap to * coordinate properly with zeroing the parent overlap in * rbd_dev_v2_parent_info() when an image gets flattened. We * drop it again if there is no overlap. but the "drop it again if there is no overlap" part was missing from the implementation. This lead to absurd parent_ref values for images with parent_overlap == 0, as parent_ref was incremented for each img_request and virtually never decremented. Fix this by leveraging the fact that refresh path calls rbd_dev_v2_parent_info() under header_rwsem and use it for read in rbd_dev_parent_get(), instead of messing around with atomics. Get rid of barriers in rbd_dev_v2_parent_info() while at it - I don't see what they'd pair with now and I suspect we are in a pretty miserable situation as far as proper locking goes regardless. Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ilya Dryomov authored
commit e69b8d41 upstream. This effectively reverts the last hunk of 392a9dad ("rbd: detect when clone image is flattened"). The problem with parent_overlap != 0 condition is that it's possible and completely valid to have an image with parent_overlap == 0 whose parent state needs to be cleaned up on unmap. The next commit, which drops the "clone image now standalone" logic, opens up another window of opportunity to hit this, but even without it # cat parent-ref.sh #!/bin/bash rbd create --image-format 2 --size 1 foo rbd snap create foo@snap rbd snap protect foo@snap rbd clone foo@snap bar rbd resize --allow-shrink --size 0 bar rbd resize --size 1 bar DEV=$(rbd map bar) rbd unmap $DEV leaves rbd_device/rbd_spec/etc and rbd_client along with ceph_client hanging around. My thinking behind calling rbd_dev_parent_put() unconditionally is that there shouldn't be any requests in flight at that point in time as we are deep into unmap sequence. Hence, even if rbd_dev_unparent() caused by flatten is delayed by in-flight requests, it will have finished by the time we reach rbd_dev_unprobe() caused by unmap, thus turning unconditional rbd_dev_parent_put() into a no-op. Fixes: http://tracker.ceph.com/issues/10352Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Clemens Ladisch authored
commit 0767e95b upstream. When the last subscriber to a "Through" port has been removed, the subscribed destination ports might still be active, so it would be wrong to send "all sounds off" and "reset controller" events to them. The proper place for such a shutdown would be the closing of the actual MIDI port (and close_substream() in rawmidi.c already can do this). This also fixes a deadlock when dummy_unuse() tries to send events to its own port that is already locked because it is being freed. Reported-by: Peter Billam <peter@www.pjb.com.au> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurent Dufour authored
commit e6eb2eba upstream. The commit 3b8a3c01 ("powerpc/pseries: Fix endiannes issue in RTAS call from xmon") was fixing an endianness issue in the call made from xmon to RTAS. However, as Michael Ellerman noticed, this fix was not complete, the token value was not byte swapped. This lead to call an unexpected and most of the time unexisting RTAS function, which is silently ignored by RTAS. This fix addresses this hole. Reported-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ahmed S. Darwish authored
commit e638642b upstream. While being in an ERROR_WARNING state, and receiving further bus error events with error counters still in the ERROR_WARNING range of 97-127 inclusive, the state handling code erroneously reverts back to ERROR_ACTIVE. Per the CAN standard, only revert to ERROR_ACTIVE when the error counters are less than 96. Moreover, in certain Kvaser models, the BUS_ERROR flag is always set along with undefined bits in the M16C status register. Thus use bitwise operators instead of full equality for checking that register against bus errors. Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ahmed S. Darwish authored
commit 14c10c2a upstream. On some x86 laptops, plugging a Kvaser device again after an unplug makes the firmware always ignore the very first command. For such a case, provide some room for retries instead of completely exiting the driver init code. Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ahmed S. Darwish authored
commit 3803fa69 upstream. Send expected argument to the URB completion hander: a CAN netdevice instead of the network interface private context `kvaser_usb_net_priv'. This was discovered by having some garbage in the kernel log in place of the netdevice names: can0 and can1. Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ahmed S. Darwish authored
commit ded50066 upstream. Upon receiving a hardware event with the BUS_RESET flag set, the driver kills all of its anchored URBs and resets all of its transmit URB contexts. Unfortunately it does so under the context of URB completion handler `kvaser_usb_read_bulk_callback()', which is often called in an atomic context. While the device is flooded with many received error packets, usb_kill_urb() typically sleeps/reschedules till the transfer request of each killed URB in question completes, leading to the sleep in atomic bug. [3] In v2 submission of the original driver patch [1], it was stated that the URBs kill and tx contexts reset was needed since we don't receive any tx acknowledgments later and thus such resources will be locked down forever. Fortunately this is no longer needed since an earlier bugfix in this patch series is now applied: all tx URB contexts are reset upon CAN channel close. [2] Moreover, a BUS_RESET is now treated _exactly_ like a BUS_OFF event, which is the recommended handling method advised by the device manufacturer. [1] http://article.gmane.org/gmane.linux.network/239442 http://www.webcitation.org/6Vr2yagAQ [2] can: kvaser_usb: Reset all URB tx contexts upon channel close 889b77f7 [3] Stacktrace: <IRQ> [<ffffffff8158de87>] dump_stack+0x45/0x57 [<ffffffff8158b60c>] __schedule_bug+0x41/0x4f [<ffffffff815904b1>] __schedule+0x5f1/0x700 [<ffffffff8159360a>] ? _raw_spin_unlock_irqrestore+0xa/0x10 [<ffffffff81590684>] schedule+0x24/0x70 [<ffffffff8147d0a5>] usb_kill_urb+0x65/0xa0 [<ffffffff81077970>] ? prepare_to_wait_event+0x110/0x110 [<ffffffff8147d7d8>] usb_kill_anchored_urbs+0x48/0x80 [<ffffffffa01f4028>] kvaser_usb_unlink_tx_urbs+0x18/0x50 [kvaser_usb] [<ffffffffa01f45d0>] kvaser_usb_rx_error+0xc0/0x400 [kvaser_usb] [<ffffffff8108b14a>] ? vprintk_default+0x1a/0x20 [<ffffffffa01f5241>] kvaser_usb_read_bulk_callback+0x4c1/0x5f0 [kvaser_usb] [<ffffffff8147a73e>] __usb_hcd_giveback_urb+0x5e/0xc0 [<ffffffff8147a8a1>] usb_hcd_giveback_urb+0x41/0x110 [<ffffffffa0008748>] finish_urb+0x98/0x180 [ohci_hcd] [<ffffffff810cd1a7>] ? acct_account_cputime+0x17/0x20 [<ffffffff81069f65>] ? local_clock+0x15/0x30 [<ffffffffa000a36b>] ohci_work+0x1fb/0x5a0 [ohci_hcd] [<ffffffff814fbb31>] ? process_backlog+0xb1/0x130 [<ffffffffa000cd5b>] ohci_irq+0xeb/0x270 [ohci_hcd] [<ffffffff81479fc1>] usb_hcd_irq+0x21/0x30 [<ffffffff8108bfd3>] handle_irq_event_percpu+0x43/0x120 [<ffffffff8108c0ed>] handle_irq_event+0x3d/0x60 [<ffffffff8108ec84>] handle_fasteoi_irq+0x74/0x110 [<ffffffff81004dfd>] handle_irq+0x1d/0x30 [<ffffffff81004727>] do_IRQ+0x57/0x100 [<ffffffff8159482a>] common_interrupt+0x6a/0x6a Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit b07ef352 upstream. Commit 6fb1ca92 "udf: Fix race between write(2) and close(2)" changed the condition when preallocation is released. The idea was that we don't want to release the preallocation for an inode on close when there are other writeable file descriptors for the inode. However the condition was written in the opposite way so we released preallocation only if there were other writeable file descriptors. Fix the problem by changing the condition properly. Fixes: 6fb1ca92Reported-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Ujfalusi authored
commit 20602e34 upstream. We should select FSR also to be driven by McBSP, not only FSX. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Geert Uytterhoeven authored
commit 7ddfdb5c upstream. If asoc_simple_card_probe() fails, asoc_simple_card_unref() may be called before dev_set_drvdata(), causing a NULL pointer dereference in asoc_simple_card_unref(): Unable to handle kernel NULL pointer dereference at virtual address 000000d4 ... PC is at asoc_simple_card_unref+0x14/0x48 LR is at asoc_simple_card_probe+0x3d4/0x40c This typically happens because asoc_simple_card_parse_of() returns -EPROBE_DEFER, but other failure modes are possible. devm_snd_soc_register_card()/snd_soc_register_card() may fail either before or after dev_set_drvdata(). Pass a snd_soc_card pointer instead of a platform_device pointer to asoc_simple_card_unref() to fix this. Note that if CONFIG_OF_DYNAMIC=n, of_node_put() is a dummy, and gcc may optimize away the loop over card->dai_link, never actually dereferencing card, and thus avoiding the crash... Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: e512e001 ("ASoC: simple-card: Fix the reference count of device nodes") Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Qais Yousef authored
commit d3268a40 upstream. In soc_new_compress() when rtd->dai_link->dynamic is set, we create the pcm substreams with this call: ret = snd_pcm_new_internal(rtd->card->snd_card, new_name, num, 1, 0, &be_pcm); which passes 0 as capture_count leading to be_pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream being NULL, hence when trying to set rtd a few lines below we get an oops. Fix by using rtd->dai_link->dpcm_playback and rtd->dai_link->dpcm_capture as playback_count and capture_count to snd_pcm_new_internal(). Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-