This will help the refactoring in the next commit
when coalesce and ring settings are added.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This bitmask represents all existing coalesce parameters.
Signed-off-by: Antonio Cardace <acardace@redhat.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix build of net/core/stream.o when CONFIG_INET is not enabled.
Fixes these build errors (sample):

ld: net/core/stream.o: in function `sk_stream_write_space':
(.text+0x27e): undefined reference to `tcp_stream_memory_free'
ld: (.text+0x29c): undefined reference to `tcp_stream_memory_free'
ld: (.text+0x2ab): undefined reference to `tcp_stream_memory_free'
ld: net/core/stream.o: in function `sk_stream_wait_memory':
(.text+0x5a1): undefined reference to `tcp_stream_memory_free'
ld: (.text+0x5bf): undefined reference to `tcp_stream_memory_free'

Fixes: 1c5f2ced ("tcp: avoid indirect call to tcp_stream_memory_free()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20201118194438.674-1-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The call to pc_delete_flow can kfree the iter object, so the following
dev_err message that accesses iter->entry can accessmemory that has
just been kfree'd.  Fix this by adding a temporary variable 'entry'
that has a copy of iter->entry and also use this when indexing into
the array mcam->entry2target_pffunc[]. Also print the unsigned value
using the %u format specifier rather than %d.

Addresses-Coverity: ("Read from pointer after free")
Fixes: 55307fcb ("octeontx2-af: Add mbox messages to install and delete MCAM rules")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201118143803.463297-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently the variable err may be uninitialized if several of the if
statements are not executed in function nix_tx_vtag_decfg and a garbage
value in err is returned.  Fix this by initialized ret at the start of
the function.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 9a946def ("octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entries")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201118132502.461098-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The shifting of the u16 result from ntohs(proto) by 16 bits to the
left will be promoted to a 32 bit signed int and then sign-extended
to a u64.  In the event that the top bit of the return from ntohs(proto)
is set then all then all the upper 32 bits of a 64 bit long end up as
also being set because of the sign-extension. Fix this by casting to
a u64 long before the shift.

Addresses-Coverity: ("Unintended sign extension")
Fixes: f0c2982a ("octeontx2-pf: Add support for SR-IOV management function")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201118130520.460365-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Srujana Challa says:

====================
Add Support for Marvell OcteonTX2 Cryptographic

This patchset adds support for CPT in OcteonTX2 admin function(AF).
CPT is a cryptographic accelerator unit and it includes microcoded
Giga Cipher engines.

OcteonTX2 SOC's resource virtualization unit (RVU) supports multiple
physical and virtual functions. Each of the PF/VF's functionality is
determined by what kind of resources are attached to it. When the CPT
block is attached to a VF, it can function as a security device.
The following document provides an overview of the hardware and
different drivers for the OcteonTX2 SOC:
https://www.kernel.org/doc/Documentation/networking/device_drivers/marvell/octeontx2.rst

This patch series includes:
- Patch to update existing Marvell sources to support CPT.
- Patch that adds mailbox messages to the admin function (AF) driver,
to configure CPT HW registers.
- Patch to provide debug information about CPT.
====================

Link: https://lore.kernel.org/r/20201118114416.28307-1-schalla@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add entries to debugfs at /sys/kernel/debug/octeontx2/cpt.

cpt_pc: dump cpt performance HW registers.
Usage:
cat /sys/kernel/debug/octeontx2/cpt/cpt_pc

cpt_ae_sts: show cpt asymmetric engines current state
Usage:
cat /sys/kernel/debug/octeontx2/cpt/cpt_ae_sts

cpt_se_sts: show cpt symmetric engines current state
Usage:
cat /sys/kernel/debug/octeontx2/cpt/cpt_se_sts

cpt_engines_info: dump cpt engine control registers.
Usage:
cat /sys/kernel/debug/octeontx2/cpt/cpt_engines_info

cpt_lfs_info: dump cpt lfs control registers.
Usage:
cat /sys/kernel/debug/octeontx2/cpt/cpt_lfs_info

cpt_err_info: dump cpt error registers.
Usage:
cat /sys/kernel/debug/octeontx2/cpt/cpt_err_info
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

On OcteonTX2 SoC, the admin function (AF) is the only one with all
priviliges to configure HW and alloc resources, PFs and it's VFs
have to request AF via mailbox for all their needs. This patch adds
a mailbox interface for CPT PFs and VFs to allocate resources
for cryptography. It also adds hardware CPT AF register defines.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

On OcteonTX2 platform CPT instruction enqueue and NIX
packet send are only possible via LMTST operations which
uses LDEOR instruction. This patch moves lmt flush
function from OcteonTX2 nic driver to include/linux/soc
since it will be used by OcteonTX2 CPT and NIC driver for
LMTST.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Performance analysis counters are maintained under the MLX4_EN_PERF_STAT
definition, which is never set.
Clean them up, with all related structures and logic.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Link: https://lore.kernel.org/r/20201118103427.4314-1-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The static checker is fooled by the non-static locking scheme
implemented by the mentioned helpers.
Let's make its life easier adding some unconditional annotation
so that the helpers are now interpreted as a plain spinlock from
sparse.

v1 -> v2:
 - add __releases() annotation to unlock_sock_fast()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/6ed7ae627d8271fb7f20e0a9c6750fbba1ac2635.1605634911.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert netsec driver to xdp_return_frame_bulk APIs.
Rely on xdp_return_frame_rx_napi for XDP_TX in order to try to recycle
the page in the "in-irq" page_pool cache.
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/01487b8f5167d62649339469cdd0c6d8df885902.1605605531.git.lorenzo@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is no easy way to distinguish if a conntracked tcp packet is
marked invalid because of tcp_in_window() check error or because
it doesn't belong to an existing connection. With this patch,
openvswitch sets liberal tcp flag for the established sessions so
that out of window packets are not marked invalid.

A helper function - nf_ct_set_tcp_be_liberal(nf_conn) is added which
sets this flag for both the directions of the nf_conn.
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Numan Siddique <nusiddiq@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20201116130126.3065077-1-nusiddiq@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Claudiu Manoil says:

====================
enetc: Clean endianness warnings up

Cleanup patches to address the outstanding endianness issues
in the driver reported by sparse.
====================

Link: https://lore.kernel.org/r/20201119101215.19223-1-claudiu.manoil@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently the control buffer descriptor (cbd) fields have endianness
restrictions while the commands passed into the control buffers
don't (with one exception). This patch fixes offending code,
by adding endianness accessors for cbd fields and removing the
unnecessary ones in case of data buffer fields. Currently there's
no need to convert all commands to little endian format, the patch
only focuses on fixing current endianness issues reported by sparse.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

These particular fields are specified in the H/W reference
manual as having network byte order format, so enforce big
endian annotation for them and clear the related sparse
warnings in the process.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch adds an IPv6 routes encapsulation attribute
to the result of netlink RTM_GETROUTE requests
(i.e. ip route get 2001:db8::).
Signed-off-by: Oliver Herms <oliver.peter.herms@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20201118230651.GA8861@twsSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We must start the retransmission timer only there are
pending data in the rtx queue.
Otherwise we can hit a WARN_ON in mptcp_reset_timer(),
as syzbot demonstrated.

Reported-and-tested-by: syzbot+42aa53dafb66a07e5a24@syzkaller.appspotmail.com
Fixes: d9ca1de8 ("mptcp: move page frag allocation in mptcp_sendmsg()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/r/1a72039f112cae048c44d398ffa14e0a1432db3d.1605737083.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jacob Keller says:

====================
devlink: move common flash_update calls to core

This series moves a couple common pieces done by all drivers of the
->flash_update interface into devlink.c flash update handler. Specifically,
the core code will now request_firmware and
devlink_flash_update_(begin|end)_notify.

This cleanup is intended to simplify driver implementations so that they
have less work to do and are less capable of doing the "wrong" thing.

For request_firmware, this simplification is done as it is not expected that
drivers would do anything else. It also standardizes all drivers so that
they use the same interface (request_firmware, as opposed to
request_firmware_direct), and allows reporting the netlink extended ack with
the file name attribute.

For status notification, this change prevents drivers from sending a status
message without properly sending the status end notification. The current
userspace implementation of devlink relies on this end notification to
properly close the flash update channel. Without this, the flash update
process may hang indefinitely. By moving the begin and end calls into the
core code, it is no longer possible for a driver author to get this wrong.

Changes since v3
* picked up acked-by and reviewed-by comments
* fixed the ionic driver to leave the print statement in place

For the original patch that moved request_firmware, see [1]. For the v2 see
[2]. For further discussion of the issues with devlink flash status see [3].
For v3 see [4].

[1] https://lore.kernel.org/netdev/20201113000142.3563690-1-jacob.e.keller@intel.com/
[2] https://lore.kernel.org/netdev/20201113224559.3910864-1-jacob.e.keller@intel.com/
[3] https://lore.kernel.org/netdev/6352e9d3-02af-721e-3a54-ef99a666be29@intel.com/
[4] https://lore.kernel.org/netdev/20201117200820.854115-1-jacob.e.keller@intel.com/
====================

Link: https://lore.kernel.org/r/20201118190636.1235045-1-jacob.e.keller@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When performing a flash update via devlink, device drivers may inform
user space of status updates via
devlink_flash_update_(begin|end|timeout|status)_notify functions.

It is expected that drivers do not send any status notifications unless
they send a begin and end message. If a driver sends a status
notification without sending the appropriate end notification upon
finishing (regardless of success or failure), the current implementation
of the devlink userspace program can get stuck endlessly waiting for the
end notification that will never come.

The current ice driver implementation may send such a status message
without the appropriate end notification in rare cases.

Fixing the ice driver is relatively simple: we just need to send the
begin_notify at the start of the function and always send an end_notify
no matter how the function exits.

Rather than assuming driver authors will always get this right in the
future, lets just fix the API so that it is not possible to get wrong.
Make devlink_flash_update_begin_notify and
devlink_flash_update_end_notify static, and call them in devlink.c core
code. Always send the begin_notify just before calling the driver's
flash_update routine. Always send the end_notify just after the routine
returns regardless of success or failure.

Doing this makes the status notification easier to use from the driver,
as it no longer needs to worry about catching failures and cleaning up
by calling devlink_flash_update_end_notify. It is now no longer possible
to do the wrong thing in this regard. We also save a couple of lines of
code in each driver.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

All drivers which implement the devlink flash update support, with the
exception of netdevsim, use either request_firmware or
request_firmware_direct to locate the firmware file. Rather than having
each driver do this separately as part of its .flash_update
implementation, perform the request_firmware within net/core/devlink.c

Replace the file_name parameter in the struct devlink_flash_update_params
with a pointer to the fw object.

Use request_firmware rather than request_firmware_direct. Although most
Linux distributions today do not have the fallback mechanism
implemented, only about half the drivers used the _direct request, as
compared to the generic request_firmware. In the event that
a distribution does support the fallback mechanism, the devlink flash
update ought to be able to use it to provide the firmware contents. For
distributions which do not support the fallback userspace mechanism,
there should be essentially no difference between request_firmware and
request_firmware_direct.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Acked-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.10-rc5, including fixes from the WiFi
  (mac80211), can and bpf (including the strncpy_from_user fix).

  Current release - regressions:

   - mac80211: fix memory leak of filtered powersave frames

   - mac80211: free sta in sta_info_insert_finish() on errors to avoid
     sleeping in atomic context

   - netlabel: fix an uninitialized variable warning added in -rc4

  Previous release - regressions:

   - vsock: forward all packets to the host when no H2G is registered,
     un-breaking AWS Nitro Enclaves

   - net: Exempt multicast addresses from five-second neighbor lifetime
     requirement, decreasing the chances neighbor tables fill up

   - net/tls: fix corrupted data in recvmsg

   - qed: fix ILT configuration of SRC block

   - can: m_can: process interrupt only when not runtime suspended

  Previous release - always broken:

   - page_frag: Recover from memory pressure by not recycling pages
     allocating from the reserves

   - strncpy_from_user: Mask out bytes after NUL terminator

   - ip_tunnels: Set tunnel option flag only when tunnel metadata is
     present, always setting it confuses Open vSwitch

   - bpf, sockmap:
      - Fix partial copy_page_to_iter so progress can still be made
      - Fix socket memory accounting and obeying SO_RCVBUF

   - net: Have netpoll bring-up DSA management interface

   - net: bridge: add missing counters to ndo_get_stats64 callback

   - tcp: brr: only postpone PROBE_RTT if RTT is < current min_rtt

   - enetc: Workaround MDIO register access HW bug

   - net/ncsi: move netlink family registration to a subsystem init,
     instead of tying it to driver probe

   - net: ftgmac100: unregister NC-SI when removing driver to avoid
     crash

   - lan743x:
      - prevent interrupt storm on open
      - fix freeing skbs in the wrong context

   - net/mlx5e: Fix socket refcount leak on kTLS RX resync

   - net: dsa: mv88e6xxx: Avoid VLAN database corruption on 6097

   - fix 21 unset return codes and other mistakes on error paths, mostly
     detected by the Hulk Robot"

* tag 'net-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (115 commits)
  fail_function: Remove a redundant mutex unlock
  selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
  lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
  net/smc: fix direct access to ib_gid_addr->ndev in smc_ib_determine_gid()
  net/smc: fix matching of existing link groups
  ipv6: Remove dependency of ipv6_frag_thdr_truncated on ipv6 module
  libbpf: Fix VERSIONED_SYM_COUNT number parsing
  net/mlx4_core: Fix init_hca fields offset
  atm: nicstar: Unmap DMA on send error
  page_frag: Recover from memory pressure
  net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset
  mlxsw: core: Use variable timeout for EMAD retries
  mlxsw: Fix firmware flashing
  net: Have netpoll bring-up DSA management interface
  atl1e: fix error return code in atl1e_probe()
  atl1c: fix error return code in atl1c_probe()
  ah6: fix error return code in ah6_input()
  net: usb: qmi_wwan: Set DTR quirk for MR400
  can: m_can: process interrupt only when not runtime suspended
  can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery
  ...

Pull rdma fixes from Jason Gunthorpe:
 "The last two weeks have been quiet here, just the usual smattering of
  long standing bug fixes.

  A collection of error case bug fixes:

   - Improper nesting of spinlock types in cm

   - Missing error codes and kfree()

   - Ensure dma_virt_ops users have the right kconfig symbols to work
     properly

   - Compilation failure of tools/testing"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  tools/testing/scatterlist: Fix test to compile and run
  IB/hfi1: Fix error return code in hfi1_init_dd()
  RMDA/sw: Don't allow drivers using dma_virt_ops on highmem configs
  RDMA/pvrdma: Fix missing kfree() in pvrdma_register_device()
  RDMA/cm: Make the local_id_table xarray non-irq

Alexei Starovoitov says:

====================
1) libbpf should not attempt to load unused subprogs, from Andrii.

2) Make strncpy_from_user() mask out bytes after NUL terminator, from Daniel.

3) Relax return code check for subprograms in the BPF verifier, from Dmitrii.

4) Fix several sockmap issues, from John.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  fail_function: Remove a redundant mutex unlock
  selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
  lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
  libbpf: Fix VERSIONED_SYM_COUNT number parsing
  bpf, sockmap: Avoid failures from skb_to_sgvec when skb has frag_list
  bpf, sockmap: Handle memory acct if skb_verdict prog redirects to self
  bpf, sockmap: Avoid returning unneeded EAGAIN when redirecting to self
  bpf, sockmap: Use truesize with sk_rmem_schedule()
  bpf, sockmap: Ensure SO_RCVBUF memory is observed on ingress redirect
  bpf, sockmap: Fix partial copy_page_to_iter so progress can still be made
  selftests/bpf: Fix error return code in run_getsockopt_test()
  bpf: Relax return code check for subprograms
  tools, bpftool: Add missing close before bpftool net attach exit
  MAINTAINERS/bpf: Update Andrii's entry.
  selftests/bpf: Fix unused attribute usage in subprogs_unused test
  bpf: Fix unsigned 'datasec_id' compared with zero in check_pseudo_btf_id
  bpf: Fix passing zero to PTR_ERR() in bpf_btf_printf_prepare
  libbpf: Don't attempt to load unused subprog as an entry-point BPF program
====================

Link: https://lore.kernel.org/r/20201119200721.288-1-alexei.starovoitov@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix a mutex_unlock() issue where before copy_from_user() is
not called mutex_locked.

Fixes: 4b1a29a7 ("error-injection: Support fault injection framework")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/160570737118.263807.8358435412898356284.stgit@devnote2

Daniel Xu says:

====================

6ae08ae3 ("bpf: Add probe_read_{user, kernel} and probe_read_{user,
kernel}_str helpers") introduced a subtle bug where
bpf_probe_read_user_str() would potentially copy a few extra bytes after
the NUL terminator.

This issue is particularly nefarious when strings are used as map keys,
as seemingly identical strings can occupy multiple entries in a map.

This patchset fixes the issue and introduces a selftest to prevent
future regressions.

v6 -> v7:
* Add comments

v5 -> v6:
* zero-pad up to sizeof(unsigned long) after NUL

v4 -> v5:
* don't read potentially uninitialized memory

v3 -> v4:
* directly pass userspace pointer to prog
* test more strings of different length

v2 -> v3:
* set pid filter before attaching prog in selftest
* use long instead of int as bpf_probe_read_user_str() retval
* style changes

v1 -> v2:
* add Fixes: tag
* add selftest
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Previously, bpf_probe_read_user_str() could potentially overcopy the
trailing bytes after the NUL due to how do_strncpy_from_user() does the
copy in long-sized strides. The issue has been fixed in the previous
commit.

This commit adds a selftest that ensures we don't regress
bpf_probe_read_user_str() again.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/4d977508fab4ec5b7b574b85bdf8b398868b6ee9.1605642949.git.dxu@dxuuu.xyz

do_strncpy_from_user() may copy some extra bytes after the NUL
terminator into the destination buffer. This usually does not matter for
normal string operations. However, when BPF programs key BPF maps with
strings, this matters a lot.

A BPF program may read strings from user memory by calling the
bpf_probe_read_user_str() helper which eventually calls
do_strncpy_from_user(). The program can then key a map with the
destination buffer. BPF map keys are fixed-width and string-agnostic,
meaning that map keys are treated as a set of bytes.

The issue is when do_strncpy_from_user() overcopies bytes after the NUL
terminator, it can result in seemingly identical strings occupying
multiple slots in a BPF map. This behavior is subtle and totally
unexpected by the user.

This commit masks out the bytes following the NUL while preserving
long-sized stride in the fast path.

Fixes: 6ae08ae3 ("bpf: Add probe_read_{user, kernel} and probe_read_{user, kernel}_str helpers")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/21efc982b3e9f2f7b0379eed642294caaa0c27a7.1605642949.git.dxu@dxuuu.xyz

Pull powerpc fixes from Michael Ellerman:
 "Fixes for CVE-2020-4788.

  From Daniel's cover letter:

  IBM Power9 processors can speculatively operate on data in the L1
  cache before it has been completely validated, via a way-prediction
  mechanism. It is not possible for an attacker to determine the
  contents of impermissible memory using this method, since these
  systems implement a combination of hardware and software security
  measures to prevent scenarios where protected data could be leaked.

  However these measures don't address the scenario where an attacker
  induces the operating system to speculatively execute instructions
  using data that the attacker controls. This can be used for example to
  speculatively bypass "kernel user access prevention" techniques, as
  discovered by Anthony Steinhauser of Google's Safeside Project. This
  is not an attack by itself, but there is a possibility it could be
  used in conjunction with side-channels or other weaknesses in the
  privileged code to construct an attack.

  This issue can be mitigated by flushing the L1 cache between privilege
  boundaries of concern.

  This patch series flushes the L1 cache on kernel entry (patch 2) and
  after the kernel performs any user accesses (patch 3). It also adds a
  self-test and performs some related cleanups"

* tag 'powerpc-cve-2020-4788' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: rename pnv|pseries_setup_rfi_flush to _setup_security_mitigations
  selftests/powerpc: refactor entry and rfi_flush tests
  selftests/powerpc: entry flush test
  powerpc: Only include kup-radix.h for 64-bit Book3S
  powerpc/64s: flush L1D after user accesses
  powerpc/64s: flush L1D on kernel entry
  selftests/powerpc: rfi_flush: disable entry flush if present

Pull xtensa fixes from Max Filippov:

 - fix placement of cache alias remapping area

 - disable preemption around cache alias management calls

 - add missing __user annotation to strncpy_from_user argument

* tag 'xtensa-20201119' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: uaccess: Add missing __user to strncpy_from_user() prototype
  xtensa: disable preemption around cache alias management calls
  xtensa: fix TLBTEMP area placement

Pull ACPI fixes from Rafael Wysocki:
 "These fix recent regression in the APEI code and initialization issue
  in the ACPI fan driver.

  Specifics:

   - Make the APEI code avoid attempts to obtain logical addresses for
     registers located in the I/O address space to fix initialization
     issues (Aili Yao)

   - Fix sysfs attribute initialization in the ACPI fan driver (Guenter
     Roeck)"

* tag 'acpi-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI, APEI, Fix error return value in apei_map_generic_address()
  ACPI: fan: Initialize performance state sysfs attribute

Pull power management fixes from Rafael Wysocki:
 "These fix two issues in ARM cpufreq drivers and one cpuidle driver
  issue.

  Specifics:

   - Add missing RCU_NONIDLE() annotations to the Tegra cpuidle driver
     (Dmitry Osipenko)

   - Fix boot frequency computation in the tegra186 cpufreq driver (Jon
     Hunter)

   - Make the SCMI cpufreq driver register a dummy clock provider to
     avoid OPP addition failures (Sudeep Holla)"

* tag 'pm-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: scmi: Fix OPP addition failure with a dummy clock provider
  cpufreq: tegra186: Fix get frequency callback
  cpuidle: tegra: Annotate tegra_pm_set_cpu_in_lp2() with RCU_NONIDLE

Pull spi fixes from Mark Brown:
 "This is a relatively large set of fixes, the bulk of it being a series
  from Lukas Wunner which fixes confusion with the lifetime of driver
  data allocated along with the SPI controller structure that's been
  created as part of the conversion to devm APIs.

  The simplest fix, explained in detail in Lukas' commit message, is to
  move to a devm_ function for allocation of the controller and hence
  driver data in order to push the free of that after anything tries to
  reference the driver data in the remove path. This results in a
  relatively large diff due to the addition of a new function but isn't
  particularly complex.

  There's also a fix from Sven van Asbroeck which fixes yet more fallout
  from the conflicts between the various different places one can
  configure the polarity of GPIOs in modern systems.

  Otherwise everything is fairly small and driver specific"

* tag 'spi-fix-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: npcm-fiu: Don't leak SPI master in probe error path
  spi: dw: Set transfer handler before unmasking the IRQs
  spi: cadence-quadspi: Fix error return code in cqspi_probe
  spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe
  spi: lpspi: Fix use-after-free on unbind
  spi: bcm-qspi: Fix use-after-free on unbind
  spi: bcm2835aux: Fix use-after-free on unbind
  spi: bcm2835: Fix use-after-free on unbind
  spi: Introduce device-managed SPI controller allocation
  spi: fsi: Fix transfer returning without finalizing message
  spi: fix client driver breakages when using GPIO descriptors

Karsten Graul says:

====================
net/smc: fixes 2020-11-18

Patch 1 fixes the matching of link groups because with SMC-Dv2 the vlanid
should no longer be part of this matching. Patch 2 removes a sparse message.
====================

Link: https://lore.kernel.org/r/20201118214038.24039-1-kgraul@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Sparse complaints 3 times about:
net/smc/smc_ib.c:203:52: warning: incorrect type in argument 1 (different address spaces)
net/smc/smc_ib.c:203:52:    expected struct net_device const *dev
net/smc/smc_ib.c:203:52:    got struct net_device [noderef] __rcu *const ndev

Fix that by using the existing and validated ndev variable instead of
accessing attr->ndev directly.

Fixes: 5102eca9 ("net/smc: Use rdma_read_gid_l2_fields to L2 fields")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

With the multi-subnet support of SMC-Dv2 the match for existing link
groups should not include the vlanid of the network device.
Set ini->smcd_version accordingly before the call to smc_conn_create()
and use this value in smc_conn_create() to skip the vlanid check.

Fixes: 5c21c4cc ("net/smc: determine accepted ISM devices")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'regulator-fix-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Mostly core fixes here, one set from Michał Mirosław which cleans up
  some issues introduced as part of the coupled regulators work, one
  memory leak during probe and two due to regulators which have an input
  supply name and regulator name which are identical, which is very
  unusual.

  There's also a fix for our handling of the similarly unusual case
  where we can't determine if a regulator is enabled during boot"

* tag 'regulator-fix-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: ti-abb: Fix array out of bound read access on the first transition
  regulator: workaround self-referent regulators
  regulator: avoid resolve_supply() infinite recursion
  regulator: fix memory leak with repeated set_machine_constraints()
  regulator: pfuze100: limit pfuze-support-disable-sw to pfuze{100,200}
  regulator: core: don't disable regulator if is_enabled return error.

IPV6=m
NF_DEFRAG_IPV6=y

ld: net/ipv6/netfilter/nf_conntrack_reasm.o: in function
`nf_ct_frag6_gather':
net/ipv6/netfilter/nf_conntrack_reasm.c:462: undefined reference to
`ipv6_frag_thdr_truncated'

Netfilter is depending on ipv6 symbol ipv6_frag_thdr_truncated. This
dependency is forcing IPV6=y.

Remove this dependency by moving ipv6_frag_thdr_truncated out of ipv6. This
is the same solution as used with a similar issues: Referring to
commit 70b095c8 ("ipv6: remove dependency of nf_defrag_ipv6 on ipv6
module")

Fixes: 9d9e937b ("ipv6/netfilter: Discard first fragment not including all headers")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Georg Kohmann <geokohma@cisco.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20201119095833.8409-1-geokohma@cisco.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>