Because the tcp-metrics is an RCU-list, it may be that two
soft-interrupts are inside __tcp_get_metrics() for the same
destination-IP at the same time. If this destination-IP is not yet part of
the tcp-metrics, both soft-interrupts will end up in tcpm_new and create
a new entry for this IP.
So, we will have two tcp-metrics with the same destination-IP in the list.

This patch checks twice __tcp_get_metrics(). First without holding the
lock, then while holding the lock. The second one is there to confirm
that the entry has not been added by another soft-irq while waiting for
the spin-lock.

Fixes: 51c5d0c4 (tcp: Maintain dynamic metrics in local cache.)
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit ae4b46e9 "net: rds: use this_cpu_* per-cpu helper" broke per-cpu
handling for rds. chpfirst is the result of __this_cpu_read(), so it is
an absolute pointer and not __percpu. Therefore, __this_cpu_write()
should not operate on chpfirst, but rather on cache->percpu->first, just
like __this_cpu_read() did before.

Cc: <stable@vger.kernel.org> # 3.8+
Signed-off-byd Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Included change:
- properly compute the batman-adv header overhead. Such
  result is later used to initialize the hard_header_len
  member of the soft-interface netdev object
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 7509963c (e1000e: Fix a compile flag mis-match for
suspend/resume) moved suspend and resume hooks to be available when
CONFIG_PM is set. However, it can be set even if CONFIG_PM_SLEEP is not set
causing following warnings to be emitted:

drivers/net/ethernet/intel/e1000e/netdev.c:6178:12: warning:
  	‘e1000_suspend’ defined but not used [-Wunused-function]

drivers/net/ethernet/intel/e1000e/netdev.c:6185:12: warning:
	‘e1000_resume’ defined but not used [-Wunused-function]

To fix this make the hooks to be available only when CONFIG_PM_SLEEP is set
and remove CONFIG_PM wrapping from driver ops because this is already
handled by SET_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS().
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Dave Ertman <davidx.m.ertman@intel.com>
Cc: Aaron Brown <aaron.f.brown@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

At first Jakub Zawadzki noticed that some divisions by reciprocal_divide
were not correct. (off by one in some cases)
http://www.wireshark.org/~darkjames/reciprocal-buggy.c

He could also show this with BPF:
http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c

The reciprocal divide in linux kernel is not generic enough,
lets remove its use in BPF, as it is not worth the pain with
current cpus.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Cc: Mircea Gherzan <mgherzan@gmail.com>
Cc: Daniel Borkmann <dxchgb@gmail.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Matt Evans <matt@ozlabs.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver does not check value returned by dma_map_page. The patch
fixes this.

v2: Removed the bugfix for non-bug ;-) (thanks Sathya)
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Sathya Perla <Sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bnx2x driver in its pci shutdown() callback releases its pci bars (in the
same manner it does during its pci remove() callback).
During a system reboot while VFs are enabled, its possible for the VF's remove
to be called (as a result of pci_disable_sriov()) after its shutdown callback
has already finished running; This will cause a paging request fault as the VF
tries to access the pci bar which it has previously released, crashing the
system.

This patch further differentiates the shutdown and remove callbacks, preventing the
pci release procedures from being called during shutdown.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rhine_reset_task() misses to disable the tx scheduler upon reset,
this can lead to a crash if work is still scheduled while we're resetting
the tx queue.

Fixes:
[   93.591707] BUG: unable to handle kernel NULL pointer dereference at 0000004c
[   93.595514] IP: [<c119d10d>] rhine_napipoll+0x491/0x6
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

Batman-adv prepends a full ethernet header in addition to its own
header. This has to be reflected in the MTU calculation, especially
since the value is used to set dev->hard_header_len.

Introduced by 411d6ed9
("batman-adv: consider network coding overhead when calculating required mtu")
Reported-by: cmsv <cmsv@wirelesspt.net>
Reported-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>

vlan gets the same netdev features except vlan filter.
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bob Falken reported that after 4G packets, multicast forwarding stopped
working. This was because of a rule reference counter overflow which
freed the rule as soon as the overflow happend.

This patch solves this by adding the FIB_LOOKUP_NOREF flag to
fib_rules_lookup calls. This is safe even from non-rcu locked sections
as in this case the flag only implies not taking a reference to the rule,
which we don't need at all.

Rules only hold references to the namespace, which are guaranteed to be
available during the call of the non-rcu protected function reg_vif_xmit
because of the interface reference which itself holds a reference to
the net namespace.

Fixes: f0ad0860 ("ipv4: ipmr: support multiple tables")
Fixes: d1db275d ("ipv6: ip6mr: support multiple tables")
Reported-by: Bob Falken <NetFestivalHaveFun@gmx.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Julian Anastasov <ja@ssi.bg>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A number of new dm96xx variants now exist.
Reported-by: Joseph Chang <joseph_chang@davicom.com.tw>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since virtio is an OASIS standard draft now, virtio implementation
discussions are taking place on the virtio-dev OASIS mailing list.
Update MAINTAINERS.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a memory leak in the ieee802154_add_iface() error handling path.
Detected by Coverity: CID 710490.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 60e453a9 ("USBNET: fix handling padding packet")
added an extra SG entry in case padding is necessary, but
failed to update the initialisation of the list. This can
cause list traversal to fall off the end of the list,
resulting in an oops.

Fixes: 60e453a9 ("USBNET: fix handling padding packet")
Reported-by: Thomas Kear <thomas@kear.co.nz>
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Tested-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix inet_diag_dump_icsk() to reflect the fact that both TCP_TIME_WAIT
and TCP_FIN_WAIT2 connections are represented by inet_timewait_sock
(not just TIME_WAIT), and for such sockets the tw_substate field holds
the real state, which can be either TCP_TIME_WAIT or TCP_FIN_WAIT2.

This brings the inet_diag state-matching code in line with the field
it uses to populate idiag_state. This is also analogous to the info
exported in /proc/net/tcp, where get_tcp4_sock() exports sk->sk_state
and get_timewait4_sock() exports tw->tw_substate.

Before fixing this, (a) neither "ss -nemoi" nor "ss -nemoi state
fin-wait-2" would return a socket in TCP_FIN_WAIT2; and (b) "ss -nemoi
state time-wait" would also return sockets in state TCP_FIN_WAIT2.

This is an old bug that predates 05dbc7b5 ("tcp/dccp: remove twchain").
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I don't know how large "tp->vlan_shift" is but static checkers worry
about shift wrapping bugs here.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:
 "Famouse last words: "final pull request" :-)

  I'm sending this because Jason Wang's fixes are pretty important

   1) Add missing per-cpu stats initialization to ip6_vti.  Otherwise
      lockdep spits out a call trace.  From Li RongQing.

   2) Fix NULL oops in wireless hwsim, from Javier Lopez

   3) TIPC deferred packet queue unlink must NULL out skb->next to avoid
      crashes.  From Erik Hugne

   4) Fix access to uninitialized buffer in nf_nat netfilter code, from
      Daniel Borkmann

   5) Fix lifetime of ipv6 loopback and SIT tunnel addresses, otherwise
      they basically timeout immediately.  From Hannes Frederic Sowa

   6) Fix DMA unmapping of TSO packets in bnx2x driver, from Michal
      Schmidt

   7) Do not allow L2 forwarding offload via macvtap device, the way
      things are now it will not end up being forwaded at all.  From
      Jason Wang

   8) Fix transmit queue selection via ndo_dfwd_start_xmit(), fixing
      things like applying NETIF_F_LLTX to the wrong device (!!) and
      eliding the proper transmit watchdog handling

   9) qlcnic driver was not updating tx statistics at all, from Manish
      Chopra"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  qlcnic: Fix ethtool statistics length calculation
  qlcnic: Fix bug in TX statistics
  net: core: explicitly select a txq before doing l2 forwarding
  macvlan: forbid L2 fowarding offload for macvtap
  bnx2x: fix DMA unmapping of TSO split BDs
  ipv6: add link-local, sit and loopback address with INFINITY_LIFE_TIME
  bnx2x: prevent WARN during driver unload
  tipc: correctly unlink packets from deferred packet queue
  ipv6: pcpu_tstats.syncp should be initialised in ip6_vti.c
  netfilter: only warn once on wrong seqadj usage
  netfilter: nf_nat: fix access to uninitialized buffer in IRC NAT helper
  NFC: Fix target mode p2p link establishment
  iwlwifi: add new devices for 7265 series
  mac80211: move "bufferable MMPDU" check to fix AP mode scan
  mac80211_hwsim: Fix NULL pointer dereference

Pull xfs bugfixes from Ben Myers:
 "Here we have a bugfix for an off-by-one in the remote attribute
  verifier that results in a forced shutdown which you can hit with v5
  superblock by creating a 64k xattr, and a fix for a missing
  destroy_work_on_stack() in the allocation worker.

  It's a bit late, but they are both fairly straightforward"

* tag 'xfs-for-linus-v3.13-rc8' of git://oss.sgi.com/xfs/xfs:
  xfs: Calling destroy_work_on_stack() to pair with INIT_WORK_ONSTACK()
  xfs: fix off-by-one error in xfs_attr3_rmt_verify

Merge branch 'leds-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds

Pull LED fix from Bryan Wu:
 "Pali Rohár and Pavel Machek reported the LED of Nokia N900 doesn't
  work with our latest 3.13-rc6 kernel.  Milo fixed the regression here"

* 'leds-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: lp5521/5523: Remove duplicate mutex

Pull ACPI and power management fixes from Rafael Wysocki:

 - Recent commits modifying the lists of C-states in the intel_idle
   driver introduced bugs leading to crashes on some systems.  Two fixes
   from Jiang Liu.

 - The ACPI AC driver should receive all types of notifications, but
   recent change made it ignore some of them.  Fix from Alexander Mezin.

 - intel_pstate's validity checks for MSRs it depends on are not
   sufficient to catch the lack of support in nested KVM setups, so they
   are extended to cover that case.  From Dirk Brandewie.

 - NEC LZ750/LS has a botched up _BIX method in its ACPI tables, so our
   ACPI battery driver needs a quirk for it.  From Lan Tianyu.

 - The tpm_ppi driver sometimes leaks memory allocated by
   acpi_get_name().  Fix from Jiang Liu.

* tag 'pm+acpi-3.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  intel_idle: close avn_cstates array with correct marker
  Revert "intel_idle: mark states tables with __initdata tag"
  ACPI / Battery: Add a _BIX quirk for NEC LZ750/LS
  intel_pstate: Add X86_FEATURE_APERFMPERF to cpu match parameters.
  ACPI / TPM: fix memory leak when walking ACPI namespace
  ACPI / AC: change notification handler type to ACPI_ALL_NOTIFY

Pull MFD fix from Samuel Ortiz:
 "This is the 2nd MFD pull request for 3.13

  It only contains one fix for the rtsx_pcr driver.  Without it we see a
  kernel panic on some machines, when resuming from suspend to RAM"

* tag 'mfd-fixes-3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes:
  mfd: rtsx_pcr: Disable interrupts before cancelling delayed works

It can be a problem when a pattern is loaded via the firmware interface.
LP55xx common driver has already locked the mutex in 'lp55xx_firmware_loaded()'.
So it should be deleted.

On the other hand, locks are required in store_engine_load()
on updating program memory.
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
Cc: <stable@vger.kernel.org>

In case CONFIG_DEBUG_OBJECTS_WORK is defined, it is needed to
call destroy_work_on_stack() which frees the debug object to pair
with INIT_WORK_ONSTACK().
Signed-off-by: Liu, Chuansheng <chuansheng.liu@intel.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

(cherry picked from commit 6f96b306)

With CRC check is enabled, if trying to set an attributes value just
equal to the maximum size of XATTR_SIZE_MAX would cause the v3 remote
attr write verification procedure failure, which would yield the back
trace like below:

<snip>
XFS (sda7): Internal error xfs_attr3_rmt_write_verify at line 191 of file fs/xfs/xfs_attr_remote.c
<snip>
Call Trace:
[<ffffffff816f0042>] dump_stack+0x45/0x56
[<ffffffffa0d99c8b>] xfs_error_report+0x3b/0x40 [xfs]
[<ffffffffa0d96edd>] ? _xfs_buf_ioapply+0x6d/0x390 [xfs]
[<ffffffffa0d99ce5>] xfs_corruption_error+0x55/0x80 [xfs]
[<ffffffffa0dbef6b>] xfs_attr3_rmt_write_verify+0x14b/0x1a0 [xfs]
[<ffffffffa0d96edd>] ? _xfs_buf_ioapply+0x6d/0x390 [xfs]
[<ffffffffa0d97315>] ? xfs_bdstrat_cb+0x55/0xb0 [xfs]
[<ffffffffa0d96edd>] _xfs_buf_ioapply+0x6d/0x390 [xfs]
[<ffffffff81184cda>] ? vm_map_ram+0x31a/0x460
[<ffffffff81097230>] ? wake_up_state+0x20/0x20
[<ffffffffa0d97315>] ? xfs_bdstrat_cb+0x55/0xb0 [xfs]
[<ffffffffa0d9726b>] xfs_buf_iorequest+0x6b/0xc0 [xfs]
[<ffffffffa0d97315>] xfs_bdstrat_cb+0x55/0xb0 [xfs]
[<ffffffffa0d97906>] xfs_bwrite+0x46/0x80 [xfs]
[<ffffffffa0dbfa94>] xfs_attr_rmtval_set+0x334/0x490 [xfs]
[<ffffffffa0db84aa>] xfs_attr_leaf_addname+0x24a/0x410 [xfs]
[<ffffffffa0db8893>] xfs_attr_set_int+0x223/0x470 [xfs]
[<ffffffffa0db8b76>] xfs_attr_set+0x96/0xb0 [xfs]
[<ffffffffa0db13b2>] xfs_xattr_set+0x42/0x70 [xfs]
[<ffffffff811df9b2>] generic_setxattr+0x62/0x80
[<ffffffff811e0213>] __vfs_setxattr_noperm+0x63/0x1b0
[<ffffffff81307afe>] ? evm_inode_setxattr+0xe/0x10
[<ffffffff811e0415>] vfs_setxattr+0xb5/0xc0
[<ffffffff811e054e>] setxattr+0x12e/0x1c0
[<ffffffff811c6e82>] ? final_putname+0x22/0x50
[<ffffffff811c708b>] ? putname+0x2b/0x40
[<ffffffff811cc4bf>] ? user_path_at_empty+0x5f/0x90
[<ffffffff811bdfd9>] ? __sb_start_write+0x49/0xe0
[<ffffffff81168589>] ? vm_mmap_pgoff+0x99/0xc0
[<ffffffff811e07df>] SyS_setxattr+0x8f/0xe0
[<ffffffff81700c2d>] system_call_fastpath+0x1a/0x1f

Tests:
    setfattr -n user.longxattr -v `perl -e 'print "A"x65536'` testfile

This patch fix it to check the remote EA size is greater than the
XATTR_SIZE_MAX rather than more than or equal to it, because it's
valid if the specified EA value size is equal to the limitation as
per VFS setxattr interface.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

(cherry picked from commit 85dd0707)

o Consider number of Tx queues while calculating the length of
  Tx statistics as part of ethtool stats.
o Calculate statistics lenght properly for 82xx and 83xx adapter
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Driver was not updating TX stats so it was not populating
  statistics in `ifconfig` command output.
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The
will cause several issues:

- NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan
  instead of lower device which misses the necessary txq synchronization for
  lower device such as txq stopping or frozen required by dev watchdog or
  control path.
- dev_hard_start_xmit() was called with NULL txq which bypasses the net device
  watchdog.
- dev_hard_start_xmit() does not check txq everywhere which will lead a crash
  when tso is disabled for lower device.

Fix this by explicitly introducing a new param for .ndo_select_queue() for just
selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also
extended to accept this parameter and dev_queue_xmit_accel() was used to do l2
forwarding transmission.

With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need
to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep
a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of
dev_queue_xmit() to do the transmission.

In the future, it was also required for macvtap l2 forwarding support since it
provides a necessary synchronization method.

Cc: John Fastabend <john.r.fastabend@intel.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: e1000-devel@lists.sourceforge.net
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

L2 fowarding offload will bypass the rx handler of real device. This will make
the packet could not be forwarded to macvtap device. Another problem is the
dev_hard_start_xmit() called for macvtap does not have any synchronization.

Fix this by forbidding L2 forwarding for macvtap.

Cc: John Fastabend <john.r.fastabend@intel.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

John W. Linville says:

====================
For the mac80211 bits, Johannes says:

"I have a fix from Javier for mac80211_hwsim when used with wmediumd
userspace, and a fix from Felix for buffering in AP mode."

For the NFC bits, Samuel says:

"This pull request only contains one fix for a regression introduced with
commit e29a9e2a. Without this fix, we can not establish a p2p link
in target mode. Only initiator mode works."

For the iwlwifi bits, Emmanuel says:

"It only includes new device IDs so it's not vital. If you have a pull
request to net.git anyway, I'd happy to have this in."
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x triggers warnings with CONFIG_DMA_API_DEBUG=y:

  WARNING: CPU: 0 PID: 2253 at lib/dma-debug.c:887 check_unmap+0xf8/0x920()
  bnx2x 0000:28:00.0: DMA-API: device driver frees DMA memory with
  different size [device address=0x00000000da2b389e] [map size=1490 bytes]
  [unmap size=66 bytes]

The reason is that bnx2x splits a TSO BD into two BDs (headers + data)
using one DMA mapping for both, but it uses only the length of the first
BD when unmapping.

This patch fixes the bug by unmapping the whole length of the two BDs.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull clock fixes from Mike Turquette:
 "Late fixes for clock drivers.  All of these fixes are for user-visible
  regressions, typically boot failures or other unsafe system
  configuration that causes badness"

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
  clk: clk-divider: fix divisor > 255 bug
  clk: exynos: File scope reg_save array should depend on PM_SLEEP
  clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock
  ARM: dts: exynos5250: Fix MDMA0 clock number
  clk: samsung: exynos5250: Add MDMA0 clocks
  clk: samsung: exynos5250: Fix ACP gate register offset
  clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks
  clk: samsung: exynos4: Correct SRC_MFC register

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes for Renesas platforms to fixup DMA masks (this started
  causing errors once the DMA API added checks for valid masks in 3.13)"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: shmobile: mackerel: Fix coherent DMA mask
  ARM: shmobile: kzm9g: Fix coherent DMA mask
  ARM: shmobile: armadillo: Fix coherent DMA mask

In the past the IFA_PERMANENT flag indicated, that the valid and preferred
lifetime where ignored. Since change fad8da3e ("ipv6 addrconf: fix
preferred lifetime state-changing behavior while valid_lft is infinity")
we honour at least the preferred lifetime on those addresses. As such
the valid lifetime gets recalculated and updated to 0.

If loopback address is added manually this problem does not occur.
Also if NetworkManager manages IPv6, those addresses will get added via
inet6_rtm_newaddr and thus will have a correct lifetime, too.
Reported-by: François-Xavier Le Bail <fx.lebail@yahoo.com>
Reported-by: Damien Wyart <damien.wyart@gmail.com>
Fixes: fad8da3e ("ipv6 addrconf: fix preferred lifetime state-changing behavior while valid_lft is infinity")
Cc: Yasushi Asano <yasushi.asano@jp.fujitsu.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Starting with commit 80c33ddd "net: add might_sleep() call to napi_disable"
bnx2x fails the might_sleep tests causing a stack trace to appear whenever
the driver is unloaded, as local_bh_disable() is being called before
napi_disable().

This changes the locking schematics related to CONFIG_NET_RX_BUSY_POLL,
preventing the need for calling local_bh_disable() and thus eliminating
the issue.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* pm-cpuidle:
  intel_idle: close avn_cstates array with correct marker
  Revert "intel_idle: mark states tables with __initdata tag"

Close avn_cstates array with correct marker to avoid overflow
in function intel_idle_cpu_init().

[rjw: The problem was introduced when commit 22e580d0 was merged
 on top of eba682a5 (intel_idle: shrink states tables).]

Fixes: 22e580d0 (intel_idle: Fixed C6 state on Avoton/Rangeley processors)
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

This reverts commit 9d046ccb.

Commit 9d046ccb marks all state tables with __initdata, but
the state table may be accessed when doing CPU online, which then
causing system crash as below:

[  204.188841] BUG: unable to handle kernel paging request at ffffffff8227cce8
[  204.196844] IP: [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130
[  204.203996] PGD 1e11067 PUD 1e12063 PMD 455859063 PTE 800000000227c062
[  204.211638] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[  204.216975] Modules linked in: x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd gpio_ich microcode joydev sb_edac edac_core ipmi_si lpc_ich ipmi_msghandler lp tpm_tis parport wmi mac_hid acpi_pad hid_generic ixgbe isci usbhid dca hid libsas ptp ahci libahci scsi_transport_sas megaraid_sas pps_core mdio
[  204.262815] CPU: 11 PID: 1489 Comm: bash Not tainted 3.13.0-rc7+ #48
[  204.269993] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.L09.1312061514 12/06/2013
[  204.281646] task: ffff8804303a24a0 ti: ffff880440fac000 task.ti: ffff880440fac000
[  204.290311] RIP: 0010:[<ffffffff814aa1c0>]  [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130
[  204.300184] RSP: 0018:ffff880440fadd28  EFLAGS: 00010286
[  204.306192] RAX: ffffffff8227cca0 RBX: ffffe8fff1a03400 RCX: 0000000000000007
[  204.314244] RDX: ffff88045f400000 RSI: 0000000000000009 RDI: 0000000000001120
[  204.322296] RBP: ffff880440fadd38 R08: 0000000000000000 R09: 0000000000000001
[  204.330411] R10: 0000000000000001 R11: 0000000000000000 R12: 000000000000001e
[  204.338482] R13: 00000000ffffffdb R14: 0000000000000001 R15: 0000000000000000
[  204.346743] FS:  00007f64f7b0c740(0000) GS:ffff88045ce00000(0000) knlGS:0000000000000000
[  204.355919] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  204.362449] CR2: ffffffff8227cce8 CR3: 0000000444ab0000 CR4: 00000000001407e0
[  204.370520] Stack:
[  204.372853]  000000000000001e ffffffff81f10240 ffff880440fadd50 ffffffff814aa307
[  204.381519]  ffffffff81ea80e0 ffff880440fadda0 ffffffff8185a230 0000000000000000
[  204.390196]  000000000000001e 0000000000000002 0000000000000002 0000000000000000
[  204.398856] Call Trace:
[  204.401683]  [<ffffffff814aa307>] cpu_hotplug_notify+0x57/0x70
[  204.408638]  [<ffffffff8185a230>] notifier_call_chain+0x100/0x150
[  204.415553]  [<ffffffff810a7dae>] __raw_notifier_call_chain+0xe/0x10
[  204.422772]  [<ffffffff81072163>] cpu_notify+0x23/0x50
[  204.428616]  [<ffffffff810723b2>] _cpu_up+0x132/0x1a0
[  204.434361]  [<ffffffff8107249d>] cpu_up+0x7d/0xa0
[  204.439819]  [<ffffffff81836c9c>] cpu_subsys_online+0x3c/0x90
[  204.446345]  [<ffffffff81554625>] device_online+0x45/0xa0
[  204.452471]  [<ffffffff815546ce>] online_store+0x4e/0x80
[  204.458511]  [<ffffffff815519a8>] dev_attr_store+0x18/0x30
[  204.464744]  [<ffffffff812a68f1>] sysfs_write_file+0x151/0x1c0
[  204.471681]  [<ffffffff81217ef1>] vfs_write+0xe1/0x160
[  204.477524]  [<ffffffff8121889c>] SyS_write+0x4c/0x90
[  204.483270]  [<ffffffff8185f2ed>] system_call_fastpath+0x1a/0x1f
[  204.490081] Code: 41 54 41 89 fc 8b 3d 48 25 85 01 53 48 8b 1d 30 25 85 01 48 03 1c c5 40 90 fb 81 48 8b 05 19 25 85 01 c7 43 0c 01 00 00 00 66 90 <48> 83 78 48 00 74 4f 41 83 c0 01 41 39 f0 7e 10 48 c7 c7 38 79
[  204.515723] RIP  [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130
[  204.522996]  RSP <ffff880440fadd28>
[  204.526976] CR2: ffffffff8227cce8
[  204.530766] ---[ end trace 336f56cc3d1cfc8c ]---

Fixes: 9d046ccb (intel_idle: mark states tables with __initdata tag)
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull parisc fix from Helge Deller:
 "This patch fixes the kmap/kunmap implementation on parisc and finally
  makes AIO work on parisc"

* 'parisc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Ensure full cache coherency for kmap/kunmap