- 24 Apr, 2008 40 commits
-
-
Matthew Ranostay authored
Several laptops have have the SPDIF out defined as 'Digital other out' when it should be 'SPDIF out' in the default config. Signed-off-by:
Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Tony Vroon authored
The legacy PC speaker signal was not routed to outputs. The codec is not prevented from powering down in this patch, although I suppose one could argue that perhaps it should be. Let me know if anyone feels strongly one way or the other. Signed-off-by:
Tony Vroon <tony@linx.net> Signed-off-by:
-
Jiang zhe authored
Please refer to [0003874] on the alsa mantis. This patch added the pci quirk. Signed-off-by:
Jiang zhe <zhe.jiang@intel.com> Signed-off-by:
-
Jiang zhe authored
To mute the output of Pin widget 15 in ALC880, we should use the HDA_OUTPUT. However, current code looks like : snd_hda_codec_amp_stereo(codec, 0x15, HDA_INPUT, 0, HDA_AMP_MUTE, bits); It may be a misspelling. Signed-off-by:
-
Pavel Machek authored
Putting space between ! and variable is a strange coding style, fix that, also make it fit into 80 columns where that is easy. Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
-
Pavel Machek authored
usb audio contains useful debugging code, protected by #if 0. Unfortunately, it will not compile because variable names changed; fix it. Dallas workaround is formatted in a way where it is not quite obvious what is normal code and what is quirk. Reformat it to make it obvious. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Pavel Machek authored
Dallas USB speakers are buggy in more than one way. One of configs they offer does not work at all. Signed-off-by:
-
Frederik Deweerdt authored
On Wed, Apr 02, 2008 at 08:19:29AM -0400, Miles Lane wrote: > [ 48.765906] [ BUG: bad unlock balance detected! ] > [ 48.765912] ------------------------------------- > [ 48.765918] pulseaudio/4277 is trying to release lock > (&codec->spdif_mutex) at: > [ 48.765930] [<c03031b7>] mutex_unlock+0x8/0xa > [ 48.765945] but there are no more locks to release! > [ 48.765950] > [ 48.765952] other info that might help us debug this: > [ 48.765959] 2 locks held by pulseaudio/4277: > [ 48.765965] #0: (&pcm->open_mutex){--..}, at: [<f89f134b>] > snd_pcm_open+0xc1/0x1ba [snd_pcm] > [ 48.766003] #1: (&chip->open_mutex){--..}, at: [<f8b4f13d>] > azx_pcm_open+0x36/0x184 [snd_hda_intel] > [ 48.766057] > [ 48.766059] stack backtrace: > [ 48.766066] Pid: 4277, comm: pulseaudio Not tainted 2.6.25-rc8-mm1 #12 > [ 48.766086] [<c013afc6>] print_unlock_inbalance_bug+0xce/0xd8 > [ 48.766107] [<c0109e1c>] ? save_stack_trace+0x1d/0x3b > [ 48.766130] [<c012f54e>] ? __kernel_text_address+0x1b/0x27 > [ 48.766146] [<c0104533>] ? dump_trace+0xcd/0xd9 > [ 48.766160] [<c0109d9e>] ? save_stack_address+0x0/0x2c > [ 48.766176] [<c013b80a>] ? find_usage_backwards+0xa4/0xc3 > [ 48.766193] [<c013cfb5>] lock_release_non_nested+0x84/0x120 > [ 48.766209] [<c03031b7>] ? mutex_unlock+0x8/0xa > [ 48.766222] [<c013d1bb>] lock_release+0x16a/0x199 > [ 48.766238] [<c0303137>] __mutex_unlock_slowpath+0xa9/0x121 > [ 48.766252] [<c03031b7>] mutex_unlock+0x8/0xa > [ 48.766263] [<f8b4ffd8>] snd_hda_multi_out_analog_open+0xd3/0xef > [snd_hda_intel] The following patch should fix it. Cc: "Miles Lane" <miles.lane@gmail.com> Signed-off-by: -
Andrew Morton authored
WARNING: braces {} are not necessary for single statement blocks #40: FILE: sound/pci/es1968.c:1831: + if (diff > 1) { + __maestro_write(chip, IDR0_DATA_PORT, cp1); + } total: 0 errors, 1 warnings, 35 lines checked ./patches/es1968-fix-jitter-on-some-maestro-cards.patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Andreas Mueller <andreas@stapelspeicher.org> Tested-by:Rene Herman <rene.herman@keyaccess.nl> Signed-off-by:
-
Andreas Mueller authored
This patch suppresses jitter on several Maestro cards in stereo mode (ALSA of course). The patch is also incorporated in the *BSD drivers where I "ported" it from. Without this patch most of the stereo audio gets out of sync and really distorted (oss-emulation with mplayer at 48000khz worked somehow). Signed-off-by:
-
Denys Vlasenko authored
sound/pci/rme9652/hdspm.c has unusually large number of static inline functions - 22. I looked through them and some of them seem to be too big to warrant inlining. This patch removes "inline" from these static functions (regardless of number of callsites - gcc nowadays auto-inlines statics with one callsite). Size difference on 32bit x86: text data bss dec hex filename 20437 2160 516 23113 5a49 linux-2.6-ALLYES/sound/pci/rme9652/hdspm.o 18036 2160 516 20712 50e8 linux-2.6.inline-ALLYES/sound/pci/rme9652/hdspm.o [coding fix by Takashi Iwai <tiwai@suse.de>] Signed-off-by:
Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by:
-
Mark Brown authored
When logging register changes in DAPM debug output include the register number. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Jiang zhe authored
Please refer to [0003848] on the alsa mantis. This patch adds the pci quirk and Mic-Int controller. Signed-off-by:
-
Clemens Ladisch authored
On the Xonar DX, initialize all bits of the two-wire control register. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Clemens Ladisch authored
Add a mixer control for switching whatever it is that is connected to GPIO pin 1 on the Xonar DX. Signed-off-by:
-
Clemens Ladisch authored
If the card model does not have a digital input or an AC97 codec, disable the respective interrupt and mixer controls. Signed-off-by:
-
Clemens Ladisch authored
When selecting the capture source on the Xonar DX, the input jack must be routed to either the line input or the microphone input by setting a GPIO pin. This requires an additional callback so that the model driver can hook into the toggling of AC97 switches. Signed-off-by:
-
Clemens Ladisch authored
Add support for the Asus Xonar DX. Signed-off-by:
-
Clemens Ladisch authored
Fix a (fortunately harmless) typo. Signed-off-by:
-
Clemens Ladisch authored
Change the card short name to show to show the card name instead of the chip name. Signed-off-by:
-
Clemens Ladisch authored
When playing data at 96 kHz or higher, reduce the DAC oversampling rate to 32. Signed-off-by:
-
Clemens Ladisch authored
Move the code that is common to all Xonar models to a separate function, and make it more generic in preparation for another model. Signed-off-by:
-
Clemens Ladisch authored
Rename all CS5381 symbols to CS53x1 because they can also be used for Xonar models with a CS5361. Signed-off-by:
-
Clemens Ladisch authored
Use separate model structures for the D2 and D2X so that the init function does not have to check for the model again. Signed-off-by:
-
Clemens Ladisch authored
Add a function to write I2C registers. Signed-off-by:
-
Clemens Ladisch authored
"GPL 2" does not mean that there have to be two MODULE_LICENSE("GPL") entries. ;-) Signed-off-by: -
Pavel Machek authored
Two sentences seem to be spliced into one in comment, fix that and fix english. Also fix codingstyle. Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Signed-off-by:
-
Clemens Ladisch authored
On C-Media cards, the GPIO pin 0 of the CM9780 must be handled exactly like on Xonar cards, so move the Xonar code to the common mixer code. Signed-off-by:
-
Herton Ronaldo Krzesinski authored
Add support for mic automute in clevo-m720r ALC883 model, and rename it to more generic clevo-m720. Also change model entry in ALSA-Configuration.txt accordingly. Signed-off-by:
Herton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by:
-
Herton Ronaldo Krzesinski authored
Map clevo-m720r ALC883 model for Clevo M720SR. Signed-off-by:
-
Stas Sergeev authored
pcsp: remove S16->U8 downsampling as dmix now supports U8 natively. Signed-off-by:
Stas Sergeev <stsp@aknet.ru> Signed-off-by:
-
Takashi Iwai authored
free_irq() must be called first to avoid races at removal. Signed-off-by: -
Takashi Iwai authored
Signed-off-by: -
Herton Ronaldo Krzesinski authored
Forgot one more: 3stack-hp model also have now the same mixer as 3stack-6ch (after DAC assignment fix in ALC883), so use it avoiding duplicating the same mixer definition. Signed-off-by:
-
Herton Ronaldo Krzesinski authored
After DAC assignment fix in ALC883, alc888_6st_dell_mixer is now the same as alc883_base_mixer. Avoid duplicated code and use alc883_base_mixer in 6stack-dell model, removing alc888_6st_dell_mixer definition. Signed-off-by:
-
Herton Ronaldo Krzesinski authored
After DAC assignment fix in ALC883, the 6stack-hp model is now the same as 6stack-dig. So just remove 6stack-hp model and replace its use with 6stack-dig. Signed-off-by:
-
Jiang zhe authored
This model is to support the Lenovo 3000 y410. ALSA bug#3856: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3856Signed-off-by:
-
Matthew Ranostay authored
Added missing DMIC verb to dell_4_1_pin_configs[]. Signed-off-by:
-
Pavel Hofman authored
* moving most of clock-specific code to card-specific routines * support for ESI Juli * to-be-researched - monitoring of analog/digital inputs Signed-off-by:
Pavel Hofman <dustin@seznam.cz> Signed-off-by:
-
Andrew Morton authored
sparc64: sound/pci/pcxhr/pcxhr.c: In function `pcxhr_update_r_buffer': sound/pci/pcxhr/pcxhr.c:459: warning: cast to pointer from integer of different size sound/pci/pcxhr/pcxhr.c: In function `pcxhr_trigger_tasklet': sound/pci/pcxhr/pcxhr.c:628: warning: long int format, different type arg (arg 4) Signed-off-by:
-
