- 06 Jun, 2017 40 commits
-
-
Martin KaFai Lau authored
Add jited_len to struct bpf_prog. It will be useful for the struct bpf_prog_info which will be added in the later patch. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Alexei Starovoitov <ast@fb.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
Add BPF_MAP_GET_FD_BY_ID command to allow user to get a fd from a bpf_map's ID. bpf_map_inc_not_zero() is added and is called with map_idr_lock held. __bpf_map_put() is also added which has the 'bool do_idr_lock' param to decide if the map_idr_lock should be acquired when freeing the map->id. In the error path of bpf_map_inc_not_zero(), it may have to call __bpf_map_put(map, false) which does not need to take the map_idr_lock when freeing the map->id. It is currently limited to CAP_SYS_ADMIN which we can consider to lift it in followup patches. Signed-off-by:
-
Martin KaFai Lau authored
Add BPF_PROG_GET_FD_BY_ID command to allow user to get a fd from a bpf_prog's ID. bpf_prog_inc_not_zero() is added and is called with prog_idr_lock held. __bpf_prog_put() is also added which has the 'bool do_idr_lock' param to decide if the prog_idr_lock should be acquired when freeing the prog->id. In the error path of bpf_prog_inc_not_zero(), it may have to call __bpf_prog_put(map, false) which does not need to take the prog_idr_lock when freeing the prog->id. It is currently limited to CAP_SYS_ADMIN which we can consider to lift it in followup patches. Signed-off-by:
-
Martin KaFai Lau authored
This patch adds BPF_PROG_GET_NEXT_ID and BPF_MAP_GET_NEXT_ID to allow userspace to iterate all bpf_prog IDs and bpf_map IDs. The API is trying to be consistent with the existing BPF_MAP_GET_NEXT_KEY. It is currently limited to CAP_SYS_ADMIN which we can consider to lift it in followup patches. Signed-off-by:
-
Martin KaFai Lau authored
This patch generates an unique ID for each created bpf_map. The approach is similar to the earlier patch for bpf_prog ID. It is worth to note that the bpf_map's ID and bpf_prog's ID are in two independent ID spaces and both have the same valid range: [1, INT_MAX). Signed-off-by:
-
Martin KaFai Lau authored
This patch generates an unique ID for each BPF_PROG_LOAD-ed prog. It is worth to note that each BPF_PROG_LOAD-ed prog will have a different ID even they have the same bpf instructions. The ID is generated by the existing idr_alloc_cyclic(). The ID is ranged from [1, INT_MAX). It is allocated in cyclic manner, so an ID will get reused every 2 billion BPF_PROG_LOAD. The bpf_prog_alloc_id() is done after bpf_prog_select_runtime() because the jit process may have allocated a new prog. Hence, we need to ensure the value of pointer 'prog' will not be changed any more before storing the prog to the prog_idr. After bpf_prog_select_runtime(), the prog is read-only. Hence, the id is stored in 'struct bpf_prog_aux'. Signed-off-by:
-
Ganesh Goudar authored
Implement ndo_set_vf_rate() for mgmt interface to support rate-limiting of VF traffic using 'ip' command. Based on the original work of Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Joe Perches authored
Using this extension reduces the object size. $ size drivers/net/ppp/ppp_mppe.o* text data bss dec hex filename 5683 216 8 5907 1713 drivers/net/ppp/ppp_mppe.o.new 5808 216 8 6032 1790 drivers/net/ppp/ppp_mppe.o.old Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
yuval.shaia@oracle.com authored
It's unused, so remove it. Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/net updates please apply the following qeth updates for net-next. Aside from some janitorial changes, this adds early setup for virtualized HiperSockets devices - building upon the code that landed via -net earlier. ==================== Signed-off-by: -
Julian Wiedmann authored
qeth currently supports early setup for OSM and OSN devices. This patch adds early setup support for z/VM HiperSockets, since they can only be coupled to L3 networks. Based on an initial version by Dmitriy Lakhvich. Signed-off-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by:
-
Ursula Braun authored
Similar to how qeth currently does early L2 setup of OSM and OSN devices, add support for early setup of L3-only devices. This adds a qeth_l3_devtype that contains all core and l3-specific sysfs attributes, so that they can be created in one go while probing. This just adds the infrastructure, exploitation of the support happens in a subsequent patch. Signed-off-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by:
-
Julian Wiedmann authored
Noting the lack of TSO support on every feature change is just silly, in particular since the requested features might not even affect NETIF_F_TSO. Signed-off-by:
-
Julian Wiedmann authored
qeth_switch_to_nonpacking_if_needed() contains an open-coded version of qeth_flush_buffers_on_no_pci(). Extract a single helper instead. Signed-off-by:
-
Julian Wiedmann authored
commit 76b11f8e ("qeth: HiperSockets Network Traffic Analyzer") missed adding the human-readable translations when adding new RCs. Signed-off-by:
-
Julian Wiedmann authored
Bridgeport is a l2-specific feature, and we should write its capabilities to a debug entry. Signed-off-by:
-
Julian Wiedmann authored
HiperSocket devices don't need the full IPv6 initialization, but we should still query the supported assists for logging purposes. Signed-off-by:
-
Julian Wiedmann authored
qeth doesn't advertise NETIF_F_SG for L3 IQDs. So trust the stack to not hand us any nonlinear skbs, and remove an always-true condition. With the fact that data_offset < 0 is no longer possible on IQDs, apply a small cleanup to subsequent code. Signed-off-by:
-
Julian Wiedmann authored
This Assist was never actually implemented in any hardware, so just remove the leftovers. Signed-off-by:
Hans Wippel <hwippel@linux.vnet.ibm.com> Reviewed-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== net: introduce trap control action to tc and offload it This patchset introduces a control action dedicated to indicate to trap the matched packet to CPU. This is specific action for HW offloads. Also, the patchset offloads the action to mlxsw driver. Example usage: $ tc filter add dev enp3s0np19 parent ffff: protocol ip prio 20 flower skip_sw dst_ip 192.168.10.1 action trap v1->v2: - patch 1 - fix the comment according to Andrew's note ==================== Signed-off-by: -
Jiri Pirko authored
Just use the previously prepared infrastructure and offload the gact trap action to ACL. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Yotam Gigi <yotamg@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
Use trap/discard flex action to implement trap. Signed-off-by:
-
Jiri Pirko authored
Introduce an ACL trap and put it into ip2me trap group. Signed-off-by:
-
Jiri Pirko authored
The "trap_id" is 9bits long. So far, this was not a problem since we used only traps with ids that fit into 8bits. But the ACL traps that are going to be introduced use the 9th bit. Fixes: eda6500a ("mlxsw: Add PCI bus implementation") Signed-off-by:
-
Jiri Pirko authored
Introduce a helper called is_tcf_gact_trap which could be used to tell if the action is gact trap or not. Signed-off-by:
-
Jiri Pirko authored
There is need to instruct the HW offloaded path to push certain matched packets to cpu/kernel for further analysis. So this patch introduces a new TRAP control action to TC. For kernel datapath, this action does not make much sense. So with the same logic as in HW, new TRAP behaves similar to STOLEN. The skb is just dropped in the datapath (and virtually ejected to an upper level, which does not exist in case of kernel). Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Colin Ian King authored
The check to see of err is set and the subsequent goto is extraneous as the next statement is where the goto is jumping to. Remove this redundant check and goto. Detected by CoverityScan, CID#1437734 ("Identical code for different branches") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
-
David S. Miller authored
Merge tag 'rxrpc-rewrite-20170606' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Support service upgrade Here's a set of patches that allow AF_RXRPC to support the AuriStor service upgrade facility. This allows the server to change the service ID requested to an upgraded service if the client requests it upon the initiation of a connection. This is used by the AuriStor AFS-compatible servers to implement IPv6 handling and improved facilities by providing improved volume location, volume, protection, file and cache management services. Note that certain parts of the AFS protocol carry hard-coded IPv4 addresses. The reason AuriStor does it this way is that probing the improved service ID first will not incur an ABORT or any other response on some servers if the server is not listening on it - and so one have to employ a timeout. This is implemented in the server by allowing an AF_RXRPC server to call bind() twice on a socket to allow it to listen on two service IDs and then call setsockopt() to instruct the server to upgrade one into the other if the client requests it (by setting userStatus to 1 on the first DATA packet on a connection). If the upgrade occurs, all further operations on that connection are done with the new service ID. AF_RXRPC has to handle this automatically as connections are not exposed to userspace. Clients can request this facility by setting an RXRPC_UPGRADE_SERVICE command in the sendmsg() control buffer and then observing the resultant service ID in the msg_addr returned by recvmsg(). This should only be used to probe the service. Clients should then use the returned service ID in all subsequent communications with that server. Note that the kernel will not retain this information should the connection expire from its cache. ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2017-06-06 This series contains updates and fixes to e1000e and igb. Matwey V Kornilov fixes an issue where igb_get_phy_id_82575() relies on the fact that page 0 is already selected, but this is not the case after igb_read_phy_reg_gs40g()/igb_write_phy_reg_gs40g() were removed in a previous commit. This leads to initialization failure and some devices not working. To fix the issue, explicitly select page 0 before first access to PHY registers. Arnd Bergmann modifies the driver to avoid a "defined but not used" warning by removing #ifdefs and using __maybe_unused annotation instead for new power management functions. Jake provides most of the changes in the series, all around PTP and timestamp fixes/updates. Resolved several race conditions based on the hardware can only handle one transmit timestamp at a time, so fix the locking logic, as well as create a statistic for "skipped" timestamps to help administrators identify issues. Benjamin Poirier provides 2 changes, first to igb to remove the second argument to igb_update_stats() since it always passes the same two arguments. So instead of having to pass the second argument, just update the function to the necessary information from the adapter structure. Second modifies the e1000e_get_stats64() call to dev_get_stats() to avoid ethtool garbage being reported. Konstantin Khlebnikov modifies e1000e to use disable_hardirq(), instead of disable_irq() for MSIx vectors in e1000_netpoll(). ==================== Signed-off-by: -
Konstantin Khlebnikov authored
Replace disable_irq() which waits for threaded irq handlers with disable_hardirq() which waits only for hardirq part. Fixes: 31119129 ("e1000: use disable_hardirq() for e1000_netpoll()") Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Benjamin Poirier authored
Some statistics passed to ethtool are garbage because e1000e_get_stats64() doesn't write them, for example: tx_heartbeat_errors. This leaks kernel memory to userspace and confuses users. Do like ixgbe and use dev_get_stats() which first zeroes out rtnl_link_stats64. Fixes: 5944701d ("net: remove useless memset's in drivers get_stats64") Reported-by:
Stefan Priebe <s.priebe@profihost.ag> Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Tested-by:
-
Benjamin Poirier authored
Given that all callers of igb_update_stats() pass the same two arguments: (adapter, &adapter->stats64), the second argument can be removed. Signed-off-by:
-
Jacob Keller authored
The igb driver has logic to handle only one Tx timestamp at a time, using a state bit lock to avoid multiple requests at once. It may be possible, if incredibly unlikely, that a Tx timestamp event is requested but never completes. Since we use an interrupt scheme to determine when the Tx timestamp occurred we would never clear the state bit in this case. Add an igb_ptp_tx_hang() function similar to the already existing igb_ptp_rx_hang() function. This function runs in the watchdog routine and makes sure we eventually recover from this case instead of permanently disabling Tx timestamps. Note: there is no currently known way to cause this without hacking the driver code to force it. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
-
Jacob Keller authored
The igb driver can only handle one Tx timestamp request at a time. This means it is possible for an application timestamp request to be ignored. There is no easy way for an administrator to determine if this occurred. Add a new statistic which tracks this, tx_hwtstamp_skipped. Signed-off-by:
-
Jacob Keller authored
The e1000e driver can only handle one Tx timestamp request at a time. This means it is possible for an application timestamp request to be ignored. There is no easy way for an administrator to determine if this occurred. Add a new statistic which tracks this, tx_hwtstamp_skipped. Signed-off-by:
-
Jacob Keller authored
The igb driver uses a state bit lock to avoid handling more than one Tx timestamp request at once. This is required because hardware is limited to a single set of registers for Tx timestamps. The state bit lock is not properly cleaned up during igb_xmit_frame_ring() if the transmit fails such as due to DMA or TSO failure. In some hardware this results in blocking timestamps until the service task times out. In other hardware this results in a permanent lock of the timestamp bit because we never receive an interrupt indicating the timestamp occurred, since indeed the packet was never transmitted. Fix this by checking for DMA and TSO errors in igb_xmit_frame_ring() and properly cleaning up after ourselves when these occur. Reported-by:
Reported-by: David Mirabito <davidm@metamako.com> Signed-off-by:
-
Jacob Keller authored
Hardware related to the igb driver has a limitation of only handling one Tx timestamp at a time. Thus, the driver uses a state bit lock to enforce that only one timestamp request is honored at a time. Unfortunately this suffers from a simple race condition. The bit lock is not cleared until after skb_tstamp_tx() is called notifying the stack of a new Tx timestamp. Even a well behaved application which sends only one timestamp request at once and waits for a response might wake up and send a new packet before the bit lock is cleared. This results in needlessly dropping some Tx timestamp requests. We can fix this by unlocking the state bit as soon as we read the Timestamp register, as this is the first point at which it is safe to unlock. To avoid issues with the skb pointer, we'll use a copy of the pointer and set the global variable in the driver structure to NULL first. This ensures that the next timestamp request does not modify our local copy of the skb pointer. This ensures that well behaved applications do not accidentally race with the unlock bit. Obviously an application which sends multiple Tx timestamp requests at once will still only timestamp one packet at a time. Unfortunately there is nothing we can do about this. Reported-by:
-
Jacob Keller authored
The e1000e driver and related hardware has a limitation on Tx PTP packets which requires we limit to timestamping a single packet at once. We do this by verifying that we never request a new Tx timestamp while we still have a tx_hwtstamp_skb pointer. Unfortunately the driver suffers from a race condition around this. The tx_hwtstamp_skb pointer is not set to NULL until after skb_tstamp_tx() is called. This function notifies the stack and applications of a new timestamp. Even a well behaved application that only sends a new request when the first one is finished might be woken up and possibly send a packet before we can free the timestamp in the driver again. The result is that we needlessly ignore some Tx timestamp requests in this corner case. Fix this by assigning the tx_hwtstamp_skb pointer prior to calling skb_tstamp_tx() and use a temporary pointer to hold the timestamped skb until that function finishes. This ensures that the application is not woken up until the driver is ready to begin timestamping a new packet. This ensures that well behaved applications do not accidentally race with condition to skip Tx timestamps. Obviously an application which sends multiple Tx timestamp requests at once will still only timestamp one packet at a time. Unfortunately there is nothing we can do about this. Reported-by:
-
Arnd Bergmann authored
The new wake function is only used by the suspend/resume handlers that are defined in inside of an #ifdef, which can cause this harmless warning: drivers/net/ethernet/intel/igb/igb_main.c:7988:13: warning: 'igb_deliver_wake_packet' defined but not used [-Wunused-function] Removing the #ifdef, instead using a __maybe_unused annotation simplifies the code and avoids the warning. Fixes: b90fa876 ("igb: Enable reading of wake up packet") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
-
Matwey V Kornilov authored
The functions igb_read_phy_reg_gs40g/igb_write_phy_reg_gs40g (which were removed in 2a3cdead) explicitly selected the required page at every phy_reg access. Currently, igb_get_phy_id_82575 relays on the fact that page 0 is already selected. The assumption is not fulfilled for my Lex 3I380CW motherboard with integrated dual i211 based gigabit ethernet. This leads to igb initialization failure and network interfaces are not working: igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k igb: Copyright (c) 2007-2014 Intel Corporation. igb: probe of 0000:01:00.0 failed with error -2 igb: probe of 0000:02:00.0 failed with error -2 In order to fix it, we explicitly select page 0 before first access to phy registers. See also: https://bugzilla.suse.com/show_bug.cgi?id=1009911 See also: http://www.lex.com.tw/products/pdf/3I380A&3I380CW.pdf Fixes: 2a3cdead ("igb: Remove GS40G specific defines/functions") Cc: <stable@vger.kernel.org> # 4.5+ Signed-off-by:
Matwey V Kornilov <matwey@sai.msu.ru> Tested-by:
-
