New machines have multiple uncore frequencies per package,
visible in /sys/devices/system/cpu/intel_uncore_frequency/uncore##/

turbostat now samples these frequencies each measurement interval.

For each package, turbostat now prints "UMHzX.Y" columns,
where X = domain_id, and Y = fabric_cluster_id.

The system summary for each UMHzX.Y column is the average value
for across all of the packages in the system.
Signed-off-by: Len Brown <len.brown@intel.com>

A group of counters called "sysfs" displays software
C-state request counts and resulting perceived C-state residency.

They are not built-in counters that turbostat knows about ahead of time,
rather they are discovered in sysfs when turbostat starts.

Thus, they are added dynamically, using the same interface
as user-added MSR counters.

When turbostat enters "no-msr" mode, such as when running as a
non-privileged user, it clears all added counters.

Updating that to clear only actual MSR added counters
allows regular users to see the sysfs counters.

[lenb: commit message]
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

So it compiles on GCC older than 9.0.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Add turbostat support for ARL-H, which behaves the same as ARL.

[lenb: also add ARL-U]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

ARL/LNL don't have PC8, other than that, it behaves the same as CNL.
Copy cnl_features for ARL/LNL, except that PC8 support is removed.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Turbostat assumed that every package had a die_id = 0.
When this assumption was violated, it exited
when looking for the package uncore frequency:

turbostat: /sys/.../intel_uncore_frequency/package_01_die_00/current_freq_khz: open failed: No such file or directory
Signed-off-by: Len Brown <len.brown@intel.com>

This is necessary to gracefully handle sparse die_id's.

no functional change
Signed-off-by: Len Brown <len.brown@intel.com>

If sysfs directory "intel_uncore_frequency/cluster00/" exists,
then use uncore cluster code (now its own routine).

The previous check for
"intel_uncore_frequency/package_00_die_00/current_freq_khz",
could be unreliable in the face of sparse die id's.
Signed-off-by: Len Brown <len.brown@intel.com>

Kernel developers often need to diagnose remote customer systems
with the latest turbostat, yet customers are running binary distros
with out-dated turbostat and the customer has no experience
cloning linux kernel trees.

Add a turbostat "snapshot" makefile target to create a standalone
source snapshot from the developer's git tree, appropriately hacked
so that the customer can build turbostat without a kernel tree.

Include the turbostat binary in the snapshot, for convenience in
those situations where the source and destination are trusted,
(and have new enough glibc to execute).

The snapshot is named with the date it was taken rather than
the turbostat VERSION, as it could occur between VERSIONS...
Signed-off-by: Len Brown <len.brown@intel.com>

Pull turbostat updates from Len Brown:

 - Use of the CPU MSR driver is now optional

 - Perf is now preferred for many counters

 - Non-root users can now execute turbostat, though with limited
   functionality

 - Add counters for some new GFX hardware

 - Minor fixes

* tag 'turbostat-2024.04.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (26 commits)
  tools/power turbostat: v2024.04.10
  tools/power/turbostat: Add support for Xe sysfs knobs
  tools/power/turbostat: Add support for new i915 sysfs knobs
  tools/power/turbostat: Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHz
  tools/power/turbostat: Fix uncore frequency file string
  tools/power/turbostat: Unify graphics sysfs snapshots
  tools/power/turbostat: Cache graphics sysfs path
  tools/power/turbostat: Enable MSR_CORE_C1_RES support for ICX
  tools/power turbostat: Add selftests
  tools/power turbostat: read RAPL counters via perf
  tools/power turbostat: Add proper re-initialization for perf file descriptors
  tools/power turbostat: Clear added counters when in no-msr mode
  tools/power turbostat: add early exits for permission checks
  tools/power turbostat: detect and disable unavailable BICs at runtime
  tools/power turbostat: Add reading aperf and mperf via perf API
  tools/power turbostat: Add --no-perf option
  tools/power turbostat: Add --no-msr option
  tools/power turbostat: enhance -D (debug counter dump) output
  tools/power turbostat: Fix warning upon failed /dev/cpu_dma_latency read
  tools/power turbostat: Read base_hz and bclk from CPUID.16H if available
  ...

Merge tag 'platform-drivers-x86-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Ilpo Järvinen:
 "Fixes:

   - intel/hid: Solve spurious hibernation aborts (power button release)

   - toshiba_acpi: Ignore 2 keys to avoid log noise during
     suspend/resume

   - intel-vbtn: Fix probe by restoring VBDL and VGBS evalutation order

   - lg-laptop: Fix W=1 %s null argument warning

  New HW Support:

   - acer-wmi: PH18-71 mode button and fan speed sensor

   - intel/hid: Lunar Lake and Arrow Lake HID IDs"

* tag 'platform-drivers-x86-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: lg-laptop: fix %s null argument warning
  platform/x86: intel-vbtn: Update tablet mode switch at end of probe
  platform/x86: intel-vbtn: Use acpi_has_method to check for switch
  platform/x86: toshiba_acpi: Silence logging for some events
  platform/x86/intel/hid: Add Lunar Lake and Arrow Lake support
  platform/x86/intel/hid: Don't wake on 5-button releases
  platform/x86: acer-wmi: Add support for Acer PH18-71

Much of turbostat can now run with perf, rather than using the MSR driver

Some of turbostat can now run as a regular non-root user.

Add some new output columns for some new GFX hardware.

[This patch updates the version, but otherwise changes no function;
 it touches up some checkpatch issues from previous patches]
Signed-off-by: Len Brown <len.brown@intel.com>

Xe graphics driver uses different graphics sysfs knobs including
   /sys/class/drm/card0/device/tile0/gt0/gtidle/idle_residency_ms
   /sys/class/drm/card0/device/tile0/gt0/freq0/cur_freq
   /sys/class/drm/card0/device/tile0/gt0/freq0/act_freq
   /sys/class/drm/card0/device/tile0/gt1/gtidle/idle_residency_ms
   /sys/class/drm/card0/device/tile0/gt1/freq0/cur_freq
   /sys/class/drm/card0/device/tile0/gt1/freq0/act_freq

Plus that,
   /sys/class/drm/card0/device/tile0/gt<n>/gtidle/name
returns either gt<n>-rc or gt<n>-mc. rc is for GFX and mc is SA Media.

Enhance turbostat to prefer the Xe sysfs knobs when they are available.
Export gt<n>-rc via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz.
Export gt<n>-mc via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

On Meteorlake platform, i915 driver supports the traditional graphics
sysfs knobs including
   /sys/class/drm/card0/power/rc6_residency_ms
   /sys/class/drm/card0/gt_cur_freq_mhz
   /sys/class/drm/card0/gt_act_freq_mhz

At the same time, it also supports
   /sys/class/drm/card0/gt/gt0/rc6_residency_ms
   /sys/class/drm/card0/gt/gt0/rps_cur_freq_mhz
   /sys/class/drm/card0/gt/gt0/rps_act_freq_mhz
   /sys/class/drm/card0/gt/gt1/rc6_residency_ms
   /sys/class/drm/card0/gt/gt1/rps_cur_freq_mhz
   /sys/class/drm/card0/gt/gt1/rps_act_freq_mhz
gt0 is for GFX and gt1 is for SA Media.

Enhance turbostat to prefer the i915 new sysfs knobs.
Export gt0 via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz.
Export gt1 via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Graphics driver (i915/Xe) on mordern platforms splits GFX and SA Media
information via different sysfs knobs.

Existing BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz columns can be reused for
GFX.

Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHz columns for SA Media.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Running turbostat on a 16 socket HPE Scale-up Compute 3200 (SapphireRapids) fails with:
turbostat: /sys/devices/system/cpu/intel_uncore_frequency/package_010_die_00/current_freq_khz: open failed: No such file or directory

We observe the sysfs uncore frequency directories named:
...
package_09_die_00/
package_10_die_00/
package_11_die_00/
...
package_15_die_00/

The culprit is an incorrect sprintf format string "package_0%d_die_0%d" used
with each instance of reading uncore frequency files. uncore-frequency-common.c
creates the sysfs directory with the format "package_%02d_die_%02d". Once the
package value reaches double digits, the formats diverge.

Change each instance of "package_0%d_die_0%d" to "package_%02d_die_%02d".

[lenb: deleted the probe part of this patch, as it was already fixed]
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>

Graphics sysfs snapshots share similar logic.
Combine them into one function to avoid code duplication.

No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Graphics drivers (i915/Xe) have different sysfs knobs on different
platforms, and it is possible that different sysfs knobs fit into the
same turbostat columns.

Instead of specifying different sysfs knobs every time, detect them
once and cache the path for future use.

No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Enable Core C1 hardware residency counter (MSR_CORE_C1_RES) on ICX.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Some of the future Intel platforms will require reading the RAPL
counters via perf and not MSR. On current platforms we can still read
them using both ways.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Pull drm nouveau fix from Dave Airlie:
 "A previous fix to nouveau devinit on the GSP paths fixed the Turing
  but broke Ampere, I did some more digging and found the proper fix.
  Sending it early as I want to make sure it makes the next 6.8 stable
  kernels to fix the regression.

  Regular fixes will be at end of week as usual.

  nouveau:

   - regression fix for GSP display enable"

* tag 'drm-fixes-2024-04-09' of https://gitlab.freedesktop.org/drm/kernel:
  nouveau: fix devinit paths to only handle display on GSP.

Add a missing doublequote in the __is_constexpr() macro comment.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts:
nouveau/gsp: don't check devinit disable on GSP.
and applies a further fix.

It turns out the open gpu driver, checks this register,
but only for display.

Match that behaviour and in the turing path only disable
the display block. (ampere already only does displays).

Fixes: 5d4e8ae6 ("nouveau/gsp: don't check devinit disable on GSP.")
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408064243.2219527-1-airlied@gmail.com

Pull x86 mitigations from Thomas Gleixner:
 "Mitigations for the native BHI hardware vulnerabilty:

  Branch History Injection (BHI) attacks may allow a malicious
  application to influence indirect branch prediction in kernel by
  poisoning the branch history. eIBRS isolates indirect branch targets
  in ring0. The BHB can still influence the choice of indirect branch
  predictor entry, and although branch predictor entries are isolated
  between modes when eIBRS is enabled, the BHB itself is not isolated
  between modes.

  Add mitigations against it either with the help of microcode or with
  software sequences for the affected CPUs"

[ This also ends up enabling the full mitigation by default despite the
  system call hardening, because apparently there are other indirect
  calls that are still sufficiently reachable, and the 'auto' case just
  isn't hardened enough.

  We'll have some more inevitable tweaking in the future    - Linus ]

* tag 'nativebhi' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  KVM: x86: Add BHI_NO
  x86/bhi: Mitigate KVM by default
  x86/bhi: Add BHI mitigation knob
  x86/bhi: Enumerate Branch History Injection (BHI) bug
  x86/bhi: Define SPEC_CTRL_BHI_DIS_S
  x86/bhi: Add support for clearing branch history at syscall entry
  x86/syscall: Don't force use of indirect calls for system calls
  x86/bugs: Change commas to semicolons in 'spectre_v2' sysfs file

Pull btrfs fixes from David Sterba:
 "Several fixes to qgroups that have been recently identified by test
  generic/475:

   - fix prealloc reserve leak in subvolume operations

   - various other fixes in reservation setup, conversion or cleanup"

* tag 'for-6.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: always clear PERTRANS metadata during commit
  btrfs: make btrfs_clear_delalloc_extent() free delalloc reserve
  btrfs: qgroup: convert PREALLOC to PERTRANS after record_root_in_trans
  btrfs: record delayed inode root in transaction
  btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations
  btrfs: qgroup: correctly model root qgroup rsv in convert

Intel processors that aren't vulnerable to BHI will set
MSR_IA32_ARCH_CAPABILITIES[BHI_NO] = 1;. Guests may use this BHI_NO bit to
determine if they need to implement BHI mitigations or not.  Allow this bit
to be passed to the guests.
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>

BHI mitigation mode spectre_bhi=auto does not deploy the software
mitigation by default. In a cloud environment, it is a likely scenario
where userspace is trusted but the guests are not trusted. Deploying
system wide mitigation in such cases is not desirable.

Update the auto mode to unconditionally mitigate against malicious
guests. Deploy the software sequence at VMexit in auto mode also, when
hardware mitigation is not available. Unlike the force =on mode,
software sequence is not deployed at syscalls in auto mode.
Suggested-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>

Branch history clearing software sequences and hardware control
BHI_DIS_S were defined to mitigate Branch History Injection (BHI).

Add cmdline spectre_bhi={on|off|auto} to control BHI mitigation:

 auto - Deploy the hardware mitigation BHI_DIS_S, if available.
 on   - Deploy the hardware mitigation BHI_DIS_S, if available,
        otherwise deploy the software sequence at syscall entry and
	VMexit.
 off  - Turn off BHI mitigation.

The default is auto mode which does not deploy the software sequence
mitigation.  This is because of the hardening done in the syscall
dispatch path, which is the likely target of BHI.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>

Mitigation for BHI is selected based on the bug enumeration. Add bits
needed to enumerate BHI bug.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>

Newer processors supports a hardware control BHI_DIS_S to mitigate
Branch History Injection (BHI). Setting BHI_DIS_S protects the kernel
from userspace BHI attacks without having to manually overwrite the
branch history.

Define MSR_SPEC_CTRL bit BHI_DIS_S and its enumeration CPUID.BHI_CTRL.
Mitigation is enabled later.
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>

Branch History Injection (BHI) attacks may allow a malicious application to
influence indirect branch prediction in kernel by poisoning the branch
history. eIBRS isolates indirect branch targets in ring0.  The BHB can
still influence the choice of indirect branch predictor entry, and although
branch predictor entries are isolated between modes when eIBRS is enabled,
the BHB itself is not isolated between modes.

Alder Lake and new processors supports a hardware control BHI_DIS_S to
mitigate BHI.  For older processors Intel has released a software sequence
to clear the branch history on parts that don't support BHI_DIS_S. Add
support to execute the software sequence at syscall entry and VMexit to
overwrite the branch history.

For now, branch history is not cleared at interrupt entry, as malicious
applications are not believed to have sufficient control over the
registers, since previous register state is cleared at interrupt
entry. Researchers continue to poke at this area and it may become
necessary to clear at interrupt entry as well in the future.

This mitigation is only defined here. It is enabled later.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Co-developed-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>

Make <asm/syscall.h> build a switch statement instead, and the compiler can
either decide to generate an indirect jump, or - more likely these days due
to mitigations - just a series of conditional branches.

Yes, the conditional branches also have branch prediction, but the branch
prediction is much more controlled, in that it just causes speculatively
running the wrong system call (harmless), rather than speculatively running
possibly wrong random less controlled code gadgets.

This doesn't mitigate other indirect calls, but the system call indirection
is the first and most easily triggered case.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>

Change the format of the 'spectre_v2' vulnerabilities sysfs file
slightly by converting the commas to semicolons, so that mitigations for
future variants can be grouped together and separated by commas.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Pull memblock fixes from Mike Rapoport:
 "Fix build errors in memblock tests:

   - add stubs to functions that calls to them were recently added to
     memblock but they were missing in tests

   - update gfp_types.h to include bits.h so that BIT() definitions
     won't depend on other includes"

* tag 'fixes-2024-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock tests: fix undefined reference to `BIT'
  memblock tests: fix undefined reference to `panic'
  memblock tests: fix undefined reference to `early_pfn_to_nid'

W=1 warns about null argument to kprintf:
warning: ‘%s’ directive argument is null [-Wformat-overflow=]
pr_info("product: %s  year: %d\n", product, year);

Use "unknown" instead of NULL.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/33d40e976f08f82b9227d0ecae38c787fcc0c0b2.1712154684.git.soyer@irl.huReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

ACER Vivobook Flip (TP401NAS) virtual intel switch is implemented as
follow:

   Device (VGBI)
   {
       Name (_HID, EisaId ("INT33D6") ...
       Name (VBDS, Zero)
       Method (_STA, 0, Serialized)  // _STA: Status ...
       Method (VBDL, 0, Serialized)
       {
           PB1E |= 0x20
           VBDS |= 0x40
       }
       Method (VGBS, 0, Serialized)
       {
           Return (VBDS) /* \_SB_.PCI0.SBRG.EC0_.VGBI.VBDS */
       }
       ...
    }

By default VBDS is set to 0. At boot it is set to clamshell (bit 6 set)
only after method VBDL is executed.

Since VBDL is now evaluated in the probe routine later, after the device
is registered, the retrieved value of VBDS was still 0 ("tablet mode")
when setting up the virtual switch.

Make sure to evaluate VGBS after VBDL, to ensure the
convertible boots in clamshell mode, the expected default.

Fixes: 26173179 ("platform/x86: intel-vbtn: Eval VBDL after registering our notifier")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240329143206.2977734-3-gwendal@chromium.orgReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

The check for a device having virtual buttons is done using
acpi_has_method(..."VBDL"). Mimic that for checking virtual switch
presence.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240329143206.2977734-2-gwendal@chromium.orgReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Stop logging unknown event / unknown keycode messages on suspend /
resume on a Toshiba Portege Z830:

1. The Toshiba Portege Z830 sends a 0x8e event when the power button
is pressed, ignore this.

2. The Toshiba Portege Z830 sends a 0xe00 hotkey event on resume from
suspend, ignore this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240402124351.167152-1-hdegoede@redhat.comReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Add INTC107B for Lunar Lake and INTC10CB for Arrow Lake ACPI devices IDs.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Link: https://lore.kernel.org/r/20240405122630.32154-1-sumeet.r.pawnikar@intel.comReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>