1. 07 Jun, 2020 11 commits
    • Linus Torvalds's avatar
      Merge tag 'ntb-5.8' of git://github.com/jonmason/ntb · 787f74fc
      Linus Torvalds authored
      Pull NTB updates from Jon Mason:
       "Intel Icelake NTB support, Intel driver bug fixes, and lots of bug
        fixes for ntb tests"
      
      * tag 'ntb-5.8' of git://github.com/jonmason/ntb:
        NTB: ntb_test: Fix bug when counting remote files
        NTB: perf: Fix race condition when run with ntb_test
        NTB: perf: Fix support for hardware that doesn't have port numbers
        NTB: perf: Don't require one more memory window than number of peers
        NTB: ntb_pingpong: Choose doorbells based on port number
        NTB: Fix the default port and peer numbers for legacy drivers
        NTB: Revert the change to use the NTB device dev for DMA allocations
        NTB: ntb_tool: reading the link file should not end in a NULL byte
        ntb_perf: avoid false dma unmap of destination address
        ntb_perf: increase sleep time from one milli sec to one sec
        ntb_tool: pass correct struct device to dma_alloc_coherent
        ntb_perf: pass correct struct device to dma_alloc_coherent
        ntb: hw: remove the code that sets the DMA mask
        NTB: correct ntb_peer_spad_addr and ntb_peer_spad_read comment typos
        ntb: intel: fix static declaration
        ntb: intel: add hw workaround for NTB BAR alignment
        ntb: intel: Add Icelake (gen4) support for Intel NTB
        NTB: Fix static check warning in perf_clear_test
        include/ntb: Fix typo in ntb_unregister_device description
      787f74fc
    • Linus Torvalds's avatar
      Merge tag 'apparmor-pr-2020-06-07' of... · a2b44706
      Linus Torvalds authored
      Merge tag 'apparmor-pr-2020-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
      
      Pull apparmor updates from John Johansen:
       "Features:
         - Replace zero-length array with flexible-array
         - add a valid state flags check
         - add consistency check between state and dfa diff encode flags
         - add apparmor subdir to proc attr interface
         - fail unpack if profile mode is unknown
         - add outofband transition and use it in xattr match
         - ensure that dfa state tables have entries
      
        Cleanups:
         - Use true and false for bool variable
         - Remove semicolon
         - Clean code by removing redundant instructions
         - Replace two seq_printf() calls by seq_puts() in aa_label_seq_xprint()
         - remove duplicate check of xattrs on profile attachment
         - remove useless aafs_create_symlink
      
        Bug fixes:
         - Fix memory leak of profile proxy
         - fix introspection of of task mode for unconfined tasks
         - fix nnp subset test for unconfined
         - check/put label on apparmor_sk_clone_security()"
      
      * tag 'apparmor-pr-2020-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
        apparmor: Fix memory leak of profile proxy
        apparmor: fix introspection of of task mode for unconfined tasks
        apparmor: check/put label on apparmor_sk_clone_security()
        apparmor: Use true and false for bool variable
        security/apparmor/label.c: Clean code by removing redundant instructions
        apparmor: Replace zero-length array with flexible-array
        apparmor: ensure that dfa state tables have entries
        apparmor: remove duplicate check of xattrs on profile attachment.
        apparmor: add outofband transition and use it in xattr match
        apparmor: fail unpack if profile mode is unknown
        apparmor: fix nnp subset test for unconfined
        apparmor: remove useless aafs_create_symlink
        apparmor: add proc subdir to attrs
        apparmor: add consistency check between state and dfa diff encode flags
        apparmor: add a valid state flags check
        AppArmor: Remove semicolon
        apparmor: Replace two seq_printf() calls by seq_puts() in aa_label_seq_xprint()
      a2b44706
    • Roberto Sassu's avatar
      ima: Remove __init annotation from ima_pcrread() · 8b8c704d
      Roberto Sassu authored
      Commit 6cc7c266 ("ima: Call ima_calc_boot_aggregate() in
      ima_eventdigest_init()") added a call to ima_calc_boot_aggregate() so that
      the digest can be recalculated for the boot_aggregate measurement entry if
      the 'd' template field has been requested. For the 'd' field, only SHA1 and
      MD5 digests are accepted.
      
      Given that ima_eventdigest_init() does not have the __init annotation, all
      functions called should not have it. This patch removes __init from
      ima_pcrread().
      
      Cc: stable@vger.kernel.org
      Fixes:  6cc7c266 ("ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()")
      Reported-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarRoberto Sassu <roberto.sassu@huawei.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8b8c704d
    • John Johansen's avatar
      apparmor: Fix memory leak of profile proxy · 3622ad25
      John Johansen authored
      When the proxy isn't replaced and the profile is removed, the proxy
      is being leaked resulting in a kmemleak check message of
      
      unreferenced object 0xffff888077a3a490 (size 16):
        comm "apparmor_parser", pid 128041, jiffies 4322684109 (age 1097.028s)
        hex dump (first 16 bytes):
          03 00 00 00 00 00 00 00 b0 92 fd 4b 81 88 ff ff  ...........K....
        backtrace:
          [<0000000084d5daf2>] aa_alloc_proxy+0x58/0xe0
          [<00000000ecc0e21a>] aa_alloc_profile+0x159/0x1a0
          [<000000004cc9ce15>] unpack_profile+0x275/0x1c40
          [<000000007332b3ca>] aa_unpack+0x1e7/0x7e0
          [<00000000e25e31bd>] aa_replace_profiles+0x18a/0x1d10
          [<00000000350d9415>] policy_update+0x237/0x650
          [<000000003fbf934e>] profile_load+0x122/0x160
          [<0000000047f7b781>] vfs_write+0x139/0x290
          [<000000008ad12358>] ksys_write+0xcd/0x170
          [<000000001a9daa7b>] do_syscall_64+0x70/0x310
          [<00000000b9efb0cf>] entry_SYSCALL_64_after_hwframe+0x49/0xb3
      
      Make sure to cleanup the profile's embedded label which will result
      on the proxy being properly freed.
      
      Fixes: 637f688d ("apparmor: switch from profiles to using labels on contexts")
      Signed-off-by: default avatarJohn Johansen <john.johansen@canonical.com>
      3622ad25
    • John Johansen's avatar
      apparmor: fix introspection of of task mode for unconfined tasks · dd2569fb
      John Johansen authored
      Fix two issues with introspecting the task mode.
      
      1. If a task is attached to a unconfined profile that is not the
         ns->unconfined profile then. Mode the mode is always reported
         as -
      
            $ ps -Z
            LABEL                               PID TTY          TIME CMD
            unconfined                         1287 pts/0    00:00:01 bash
            test (-)                           1892 pts/0    00:00:00 ps
      
         instead of the correct value of (unconfined) as shown below
      
            $ ps -Z
            LABEL                               PID TTY          TIME CMD
            unconfined                         2483 pts/0    00:00:01 bash
            test (unconfined)                  3591 pts/0    00:00:00 ps
      
      2. if a task is confined by a stack of profiles that are unconfined
         the output of label mode is again the incorrect value of (-) like
         above, instead of (unconfined). This is because the visibile
         profile count increment is skipped by the special casing of
         unconfined.
      
      Fixes: f1bd9041 ("apparmor: add the base fns() for domain labels")
      Signed-off-by: default avatarJohn Johansen <john.johansen@canonical.com>
      dd2569fb
    • Mauricio Faria de Oliveira's avatar
      apparmor: check/put label on apparmor_sk_clone_security() · 3b646abc
      Mauricio Faria de Oliveira authored
      Currently apparmor_sk_clone_security() does not check for existing
      label/peer in the 'new' struct sock; it just overwrites it, if any
      (with another reference to the label of the source sock.)
      
          static void apparmor_sk_clone_security(const struct sock *sk,
                                                 struct sock *newsk)
          {
                  struct aa_sk_ctx *ctx = SK_CTX(sk);
                  struct aa_sk_ctx *new = SK_CTX(newsk);
      
                  new->label = aa_get_label(ctx->label);
                  new->peer = aa_get_label(ctx->peer);
          }
      
      This might leak label references, which might overflow under load.
      Thus, check for and put labels, to prevent such errors.
      
      Note this is similarly done on:
      
          static int apparmor_socket_post_create(struct socket *sock, ...)
          ...
                  if (sock->sk) {
                          struct aa_sk_ctx *ctx = SK_CTX(sock->sk);
      
                          aa_put_label(ctx->label);
                          ctx->label = aa_get_label(label);
                  }
          ...
      
      Context:
      -------
      
      The label reference count leak is observed if apparmor_sock_graft()
      is called previously: this sets the 'ctx->label' field by getting
      a reference to the current label (later overwritten, without put.)
      
          static void apparmor_sock_graft(struct sock *sk, ...)
          {
                  struct aa_sk_ctx *ctx = SK_CTX(sk);
      
                  if (!ctx->label)
                          ctx->label = aa_get_current_label();
          }
      
      And that is the case on crypto/af_alg.c:af_alg_accept():
      
          int af_alg_accept(struct sock *sk, struct socket *newsock, ...)
          ...
                  struct sock *sk2;
                  ...
                  sk2 = sk_alloc(...);
                  ...
                  security_sock_graft(sk2, newsock);
                  security_sk_clone(sk, sk2);
          ...
      
      Apparently both calls are done on their own right, especially for
      other LSMs, being introduced in 2010/2014, before apparmor socket
      mediation in 2017 (see commits [1,2,3,4]).
      
      So, it looks OK there! Let's fix the reference leak in apparmor.
      
      Test-case:
      ---------
      
      Exercise that code path enough to overflow label reference count.
      
          $ cat aa-refcnt-af_alg.c
          #include <stdio.h>
          #include <string.h>
          #include <unistd.h>
          #include <sys/socket.h>
          #include <linux/if_alg.h>
      
          int main() {
                  int sockfd;
                  struct sockaddr_alg sa;
      
                  /* Setup the crypto API socket */
                  sockfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
                  if (sockfd < 0) {
                          perror("socket");
                          return 1;
                  }
      
                  memset(&sa, 0, sizeof(sa));
                  sa.salg_family = AF_ALG;
                  strcpy((char *) sa.salg_type, "rng");
                  strcpy((char *) sa.salg_name, "stdrng");
      
                  if (bind(sockfd, (struct sockaddr *) &sa, sizeof(sa)) < 0) {
                          perror("bind");
                          return 1;
                  }
      
                  /* Accept a "connection" and close it; repeat. */
                  while (!close(accept(sockfd, NULL, 0)));
      
                  return 0;
          }
      
          $ gcc -o aa-refcnt-af_alg aa-refcnt-af_alg.c
      
          $ ./aa-refcnt-af_alg
          <a few hours later>
      
          [ 9928.475953] refcount_t overflow at apparmor_sk_clone_security+0x37/0x70 in aa-refcnt-af_alg[1322], uid/euid: 1000/1000
          ...
          [ 9928.507443] RIP: 0010:apparmor_sk_clone_security+0x37/0x70
          ...
          [ 9928.514286]  security_sk_clone+0x33/0x50
          [ 9928.514807]  af_alg_accept+0x81/0x1c0 [af_alg]
          [ 9928.516091]  alg_accept+0x15/0x20 [af_alg]
          [ 9928.516682]  SYSC_accept4+0xff/0x210
          [ 9928.519609]  SyS_accept+0x10/0x20
          [ 9928.520190]  do_syscall_64+0x73/0x130
          [ 9928.520808]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
      
      Note that other messages may be seen, not just overflow, depending on
      the value being incremented by kref_get(); on another run:
      
          [ 7273.182666] refcount_t: saturated; leaking memory.
          ...
          [ 7273.185789] refcount_t: underflow; use-after-free.
      
      Kprobes:
      -------
      
      Using kprobe events to monitor sk -> sk_security -> label -> count (kref):
      
      Original v5.7 (one reference leak every iteration)
      
       ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd2
       ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4
       ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd3
       ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd5
       ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4
       ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd6
      
      Patched v5.7 (zero reference leak per iteration)
      
       ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593
       ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
       ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593
       ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
       ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593
       ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
      
      Commits:
      -------
      
      [1] commit 507cad35 ("crypto: af_alg - Make sure sk_security is initialized on accept()ed sockets")
      [2] commit 4c63f83c ("crypto: af_alg - properly label AF_ALG socket")
      [3] commit 2acce6aa ("Networking") a.k.a ("crypto: af_alg - Avoid sock_graft call warning)
      [4] commit 56974a6f ("apparmor: add base infastructure for socket mediation")
      
      Fixes: 56974a6f ("apparmor: add base infastructure for socket mediation")
      Reported-by: default avatarBrian Moyles <bmoyles@netflix.com>
      Signed-off-by: default avatarMauricio Faria de Oliveira <mfo@canonical.com>
      Signed-off-by: default avatarJohn Johansen <john.johansen@canonical.com>
      3b646abc
    • Linus Torvalds's avatar
      Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc · 9aa900c8
      Linus Torvalds authored
      Pull char/misc driver updates from Greg KH:
       "Here is the large set of char/misc driver patches for 5.8-rc1
      
        Included in here are:
      
         - habanalabs driver updates, loads
      
         - mhi bus driver updates
      
         - extcon driver updates
      
         - clk driver updates (approved by the clock maintainer)
      
         - firmware driver updates
      
         - fpga driver updates
      
         - gnss driver updates
      
         - coresight driver updates
      
         - interconnect driver updates
      
         - parport driver updates (it's still alive!)
      
         - nvmem driver updates
      
         - soundwire driver updates
      
         - visorbus driver updates
      
         - w1 driver updates
      
         - various misc driver updates
      
        In short, loads of different driver subsystem updates along with the
        drivers as well.
      
        All have been in linux-next for a while with no reported issues"
      
      * tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
        habanalabs: correctly cast u64 to void*
        habanalabs: initialize variable to default value
        extcon: arizona: Fix runtime PM imbalance on error
        extcon: max14577: Add proper dt-compatible strings
        extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
        extcon: remove redundant assignment to variable idx
        w1: omap-hdq: print dev_err if irq flags are not cleared
        w1: omap-hdq: fix interrupt handling which did show spurious timeouts
        w1: omap-hdq: fix return value to be -1 if there is a timeout
        w1: omap-hdq: cleanup to add missing newline for some dev_dbg
        /dev/mem: Revoke mappings when a driver claims the region
        misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
        misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
        misc: xilinx-sdfec: improve get_user_pages_fast() error handling
        nvmem: qfprom: remove incorrect write support
        habanalabs: handle MMU cache invalidation timeout
        habanalabs: don't allow hard reset with open processes
        habanalabs: GAUDI does not support soft-reset
        habanalabs: add print for soft reset due to event
        habanalabs: improve MMU cache invalidation code
        ...
      9aa900c8
    • Linus Torvalds's avatar
      Merge tag 'driver-core-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core · f558b836
      Linus Torvalds authored
      Pull driver core updates from Greg KH:
       "Here is the set of driver core patches for 5.8-rc1.
      
        Not all that huge this release, just a number of small fixes and
        updates:
      
         - software node fixes
      
         - kobject now sends KOBJ_REMOVE when it is removed from sysfs, not
           when it is removed from memory (which could come much later)
      
         - device link additions and fixes based on testing on more devices
      
         - firmware core cleanups
      
         - other minor changes, full details in the shortlog
      
        All have been in linux-next for a while with no reported issues"
      
      * tag 'driver-core-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (23 commits)
        driver core: Update device link status correctly for SYNC_STATE_ONLY links
        firmware_loader: change enum fw_opt to u32
        software node: implement software_node_unregister()
        kobject: send KOBJ_REMOVE uevent when the object is removed from sysfs
        driver core: Remove unnecessary is_fwnode_dev variable in device_add()
        drivers property: When no children in primary, try secondary
        driver core: platform: Fix spelling errors in platform.c
        driver core: Remove check in driver_deferred_probe_force_trigger()
        of: platform: Batch fwnode parsing when adding all top level devices
        driver core: fw_devlink: Add support for batching fwnode parsing
        driver core: Look for waiting consumers only for a fwnode's primary device
        driver core: Move code to the right part of the file
        Revert "Revert "driver core: Set fw_devlink to "permissive" behavior by default""
        drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish
        firmware_loader: move fw_fallback_config to a private kernel symbol namespace
        driver core: Add missing '\n' in log messages
        driver/base/soc: Use kobj_to_dev() API
        Add documentation on meaning of -EPROBE_DEFER
        driver core: platform: remove redundant assignment to variable ret
        debugfs: Use the correct style for SPDX License Identifier
        ...
      f558b836
    • Linus Torvalds's avatar
      Merge tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging · 80ef846e
      Linus Torvalds authored
      Pull staging/IIO driver updates from Greg KH:
       "Here is the large set of staging and IIO driver changes for 5.8-rc1
      
        Nothing major, but a lot of new IIO drivers are included in here,
        along with other core iio cleanups and changes.
      
        On the staging driver front, again, nothing noticable. No new
        deletions or additions, just a ton of tiny cleanups all over the tree
        done by a lot of different people. Most coding style, but many actual
        real fixes and cleanups that are nice to see.
      
        All of these have been in linux-next for a while with no reported
        issues"
      
      * tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (618 commits)
        staging: rtl8723bs: Use common packet header constants
        staging: sm750fb: Add names to proc_setBLANK args
        staging: most: usb: init return value in default path of switch/case expression
        staging: vchiq: Get rid of VCHIQ_SERVICE_OPENEND callback reason
        staging: vchiq: move vchiq_release_message() into vchiq
        staging: vchi: Get rid of C++ guards
        staging: vchi: Get rid of not implemented function declarations
        staging: vchi: Get rid of vchiq_status_to_vchi()
        staging: vchi: Get rid of vchi_service_set_option()
        staging: vchi: Merge vchi_msg_queue() into vchi_queue_kernel_message()
        staging: vchiq: Move copy callback handling into vchiq
        staging: vchi: Get rid of vchi_queue_user_message()
        staging: vchi: Get rid of vchi_service_destroy()
        staging: most: usb: use function sysfs_streq
        staging: most: usb: add missing put_device calls
        staging: most: usb: use correct error codes
        staging: most: usb: replace code to calculate array index
        staging: most: usb: don't use error path to exit function on success
        staging: most: usb: move allocation of URB out of critical section
        staging: most: usb: return 0 instead of variable
        ...
      80ef846e
    • Linus Torvalds's avatar
      Merge tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty · 081096d9
      Linus Torvalds authored
      Pull tty/serial driver updates from Greg KH:
       "Here is the tty and serial driver updates for 5.8-rc1
      
        Nothing huge at all, just a lot of little serial driver fixes, updates
        for new devices and features, and other small things. Full details are
        in the shortlog.
      
        All of these have been in linux-next with no issues for a while"
      
      * tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits)
        tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
        tty: serial: imx: clear Ageing Timer Interrupt in handler
        serial: 8250_fintek: Add F81966 Support
        sc16is7xx: Add flag to activate IrDA mode
        dt-bindings: sc16is7xx: Add flag to activate IrDA mode
        serial: 8250: Support rs485 bus termination GPIO
        serial: 8520_port: Fix function param documentation
        dt-bindings: serial: Add binding for rs485 bus termination GPIO
        vt: keyboard: avoid signed integer overflow in k_ascii
        serial: 8250: Enable 16550A variants by default on non-x86
        tty: hvc_console, fix crashes on parallel open/close
        serial: imx: Initialize lock for non-registered console
        sc16is7xx: Read the LSR register for basic device presence check
        sc16is7xx: Allow sharing the IRQ line
        sc16is7xx: Use threaded IRQ
        sc16is7xx: Always use falling edge IRQ
        tty: n_gsm: Fix bogus i++ in gsm_data_kick
        tty: n_gsm: Remove unnecessary test in gsm_print_packet()
        serial: stm32: add no_console_suspend support
        tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
        ...
      081096d9
    • Linus Torvalds's avatar
      Merge tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb · e611c0fe
      Linus Torvalds authored
      Pull USB/PHY driver updates from Greg KH:
       "Here are the large set of USB and PHY driver updates for 5.8-rc1.
      
        Nothing huge, just lots of little things:
      
         - USB gadget fixes and additions all over the place
      
         - new PHY drivers
      
         - PHY driver fixes and updates
      
         - XHCI driver updates
      
         - musb driver updates
      
         - more USB-serial driver ids added
      
         - various USB quirks added
      
         - thunderbolt minor updates and fixes
      
         - typec updates and additions
      
        All of these have been in linux-next for a while with no reported
        issues"
      
      * tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits)
        usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs
        usb: dwc3: meson-g12a: fix error path when fetching the reset line fails
        Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings"
        Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180"
        Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver"
        USB: serial: ch341: fix lockup of devices with limited prescaler
        USB: serial: ch341: add basis for quirk detection
        CDC-ACM: heed quirk also in error handling
        USB: serial: option: add Telit LE910C1-EUX compositions
        usb: musb: Fix runtime PM imbalance on error
        usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
        usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
        usb: musb: use true for 'use_dma'
        usb: musb: start session in resume for host port
        usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
        USB: serial: qcserial: add DW5816e QDL support
        thunderbolt: Add trivial .shutdown
        usb: dwc3: keystone: Turn on USB3 PHY before controller
        dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
        dt-bindings: usb: convert keystone-usb.txt to YAML
        ...
      e611c0fe
  2. 06 Jun, 2020 29 commits
    • Linus Torvalds's avatar
      Merge tag 'sh-for-5.8' of git://git.libc.org/linux-sh · 3b69e8b4
      Linus Torvalds authored
      Pull arch/sh updates from Rich Felker:
       "Fix for arch/sh build regression with newer binutils, removal of SH5,
        fixes for module exports, and misc cleanup"
      
      * tag 'sh-for-5.8' of git://git.libc.org/linux-sh:
        sh: remove sh5 support
        sh: add missing EXPORT_SYMBOL() for __delay
        sh: Convert ins[bwl]/outs[bwl] macros to inline functions
        sh: Convert iounmap() macros to inline functions
        sh: Add missing DECLARE_EXPORT() for __ashiftrt_r4_xx
        sh: configs: Cleanup old Kconfig IO scheduler options
        arch/sh: vmlinux.scr
        sh: Replace CONFIG_MTD_M25P80 with CONFIG_MTD_SPI_NOR in sh7757lcr_defconfig
        sh: sh4a: Bring back tmu3_device early device
      3b69e8b4
    • Linus Torvalds's avatar
      Merge tag 'kconfig-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild · b170290c
      Linus Torvalds authored
      Pull Kconfig updates from Masahiro Yamada:
      
       - allow only 'config', 'comment', 'if' statements inside 'choice' since
         the other statements are not sensible inside 'choice' and should be
         grammatical error
      
       - support LMC_KEEP env variable for 'make local{yes,mod}config' to
         preserve some CONFIG options
      
       - deprecate 'make kvmconfig' and 'make xenconfig' in favor of
         'make kvm_guest.config' and 'make xen.config'
      
       - code cleanups
      
      * tag 'kconfig-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
        kconfig: announce removal of 'kvmconfig' and 'xenconfig' shorthands
        streamline_config.pl: add LMC_KEEP to preserve some kconfigs
        kconfig: allow only 'config', 'comment', and 'if' inside 'choice'
        kconfig: tests: remove randconfig test for choice in choice
        kconfig: do not assign a variable in the return statement
        kconfig: do not use OR-assignment for zero-cleared structure
      b170290c
    • Linus Torvalds's avatar
      Merge tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild · cff11abe
      Linus Torvalds authored
      Pull Kbuild updates from Masahiro Yamada:
      
       - fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32
      
       - ensure to rebuild all objects when the compiler is upgraded
      
       - exclude system headers from dependency tracking and fixdep processing
      
       - fix potential bit-size mismatch between the kernel and BPF user-mode
         helper
      
       - add the new syntax 'userprogs' to build user-space programs for the
         target architecture (the same arch as the kernel)
      
       - compile user-space sample code under samples/ for the target arch
         instead of the host arch
      
       - make headers_install fail if a CONFIG option is leaked to user-space
      
       - sanitize the output format of scripts/checkstack.pl
      
       - handle ARM 'push' instruction in scripts/checkstack.pl
      
       - error out before modpost if a module name conflict is found
      
       - error out when multiple directories are passed to M= because this
         feature is broken for a long time
      
       - add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info
      
       - a lot of cleanups of modpost
      
       - dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
         second pass of modpost
      
       - do not run the second pass of modpost if nothing in modules is
         updated
      
       - install modules.builtin(.modinfo) by 'make install' as well as by
         'make modules_install' because it is useful even when
         CONFIG_MODULES=n
      
       - add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
         to allow users to use alternatives such as pigz, pbzip2, etc.
      
      * tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits)
        kbuild: add variables for compression tools
        Makefile: install modules.builtin even if CONFIG_MODULES=n
        mksysmap: Fix the mismatch of '.L' symbols in System.map
        kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS
        modpost: change elf_info->size to size_t
        modpost: remove is_vmlinux() helper
        modpost: strip .o from modname before calling new_module()
        modpost: set have_vmlinux in new_module()
        modpost: remove mod->skip struct member
        modpost: add mod->is_vmlinux struct member
        modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}()
        modpost: remove mod->is_dot_o struct member
        modpost: move -d option in scripts/Makefile.modpost
        modpost: remove -s option
        modpost: remove get_next_text() and make {grab,release_}file static
        modpost: use read_text_file() and get_line() for reading text files
        modpost: avoid false-positive file open error
        modpost: fix potential mmap'ed file overrun in get_src_version()
        modpost: add read_text_file() and get_line() helpers
        modpost: do not call get_modinfo() for vmlinux(.o)
        ...
      cff11abe
    • Linus Torvalds's avatar
      Merge tag 'dma-mapping-5.8-2' of git://git.infradead.org/users/hch/dma-mapping · 6f2dc3d3
      Linus Torvalds authored
      Pull dma-mapping helpers from Christoph Hellwig:
       "These were in a separate stable branch so that various media and drm
        trees could pull the in for bug fixes, but looking at linux-next that
        hasn't actually happened yet. Still sending the APIs to you in the
        hope that these bug fixes get picked up for 5.8 in one way or another.
      
        Summary:
      
         - add DMA mapping helpers for struct sg_table (Marek Szyprowski)"
      
      * tag 'dma-mapping-5.8-2' of git://git.infradead.org/users/hch/dma-mapping:
        iommu: add generic helper for mapping sgtable objects
        scatterlist: add generic wrappers for iterating over sgtable objects
        dma-mapping: add generic helpers for mapping sgtable objects
      6f2dc3d3
    • Linus Torvalds's avatar
      Merge tag 'dma-mapping-5.8' of git://git.infradead.org/users/hch/dma-mapping · 1ee18de9
      Linus Torvalds authored
      Pull dma-mapping updates from Christoph Hellwig:
      
       - enhance the dma pool to allow atomic allocation on x86 with AMD SEV
         (David Rientjes)
      
       - two small cleanups (Jason Yan and Peter Collingbourne)
      
      * tag 'dma-mapping-5.8' of git://git.infradead.org/users/hch/dma-mapping:
        dma-contiguous: fix comment for dma_release_from_contiguous
        dma-pool: scale the default DMA coherent pool size with memory capacity
        x86/mm: unencrypted non-blocking DMA allocations use coherent pools
        dma-pool: add pool sizes to debugfs
        dma-direct: atomic allocations must come from atomic coherent pools
        dma-pool: dynamically expanding atomic pools
        dma-pool: add additional coherent pools to map to gfp mask
        dma-remap: separate DMA atomic pools from direct remap code
        dma-debug: make __dma_entry_alloc_check_leak() static
      1ee18de9
    • Linus Torvalds's avatar
      Merge branch 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging · e542e0dc
      Linus Torvalds authored
      Pull dmi update from Jean Delvare.
      
      * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
        firmware/dmi: Report DMI Bios & EC firmware release
      e542e0dc
    • Linus Torvalds's avatar
      Merge tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci · 3925c3bb
      Linus Torvalds authored
      Pull PCI updates from Bjorn Helgaas:
       "Enumeration:
      
         - Program MPS for RCiEP devices (Ashok Raj)
      
         - Fix pci_register_host_bridge() device_register() error handling
           (Rob Herring)
      
         - Fix pci_host_bridge struct device release/free handling (Rob
           Herring)
      
        Resource management:
      
         - Allow resizing BARs for devices on root bus (Ard Biesheuvel)
      
        Power management:
      
         - Reduce Thunderbolt resume time by working around devices that don't
           support DLL Link Active reporting (Mika Westerberg)
      
         - Work around a Pericom USB controller OHCI/EHCI PME# defect
           (Kai-Heng Feng)
      
        Virtualization:
      
         - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok
           Raj)
      
         - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner)
      
         - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven)
      
        Error handling:
      
         - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership
           (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan)
      
         - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER
           events (Kuppuswamy Sathyanarayanan)
      
         - Don't enable AER by default in Kconfig (Bjorn Helgaas)
      
        Peer-to-peer DMA:
      
         - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher)
      
        ASPM:
      
         - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng)
      
        Endpoint framework:
      
         - Fix DMA channel release in test (Kunihiko Hayashi)
      
         - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar)
      
         - Add support to handle multiple base for mapping outbound memory
           (Lad Prabhakar)
      
        Generic host bridge driver:
      
         - Support building as module (Rob Herring)
      
         - Eliminate pci_host_common_probe wrappers (Rob Herring)
      
        Amlogic Meson PCIe controller driver:
      
         - Don't use FAST_LINK_MODE to set up link (Marc Zyngier)
      
        Broadcom STB PCIe controller driver:
      
         - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan)
      
         - Fix clk_put() error (Jim Quinlan)
      
         - Fix window register offset (Jim Quinlan)
      
         - Assert fundamental reset on initialization (Nicolas Saenz Julienne)
      
         - Add notify xHCI reset property (Nicolas Saenz Julienne)
      
         - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas
           Saenz Julienne)
      
         - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas
           Saenz Julienne)
      
        Cadence PCIe controller driver:
      
         - Remove "cdns,max-outbound-regions" DT property (replaced by
           "ranges") (Kishon Vijay Abraham I)
      
         - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT
           (Kishon Vijay Abraham I)
      
        Marvell Aardvark PCIe controller driver:
      
         - Improve link training (Marek Behún)
      
         - Add PHY support (Marek Behún)
      
         - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek
           Behún)
      
         - Train link immediately after enabling training to work around
           detection issues with some cards (Pali Rohár)
      
         - Issue PERST via GPIO to work around detection issues (Pali Rohár)
      
         - Don't blindly enable ASPM L0s (Pali Rohár)
      
         - Replace custom macros by standard linux/pci_regs.h macros (Pali
           Rohár)
      
        Microsoft Hyper-V host bridge driver:
      
         - Fix probe failure path to release resource (Wei Hu)
      
         - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu)
      
        Renesas R-Car PCIe controller driver:
      
         - Fix incorrect programming of OB windows (Andrew Murray)
      
         - Add suspend/resume (Kazufumi Ikeda)
      
         - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar)
      
         - Add endpoint controller driver (Lad Prabhakar)
      
         - Fix PCIEPAMR mask calculation (Lad Prabhakar)
      
         - Add r8a77961 to DT binding (Yoshihiro Shimoda)
      
        Socionext UniPhier Pro5 controller driver:
      
         - Add endpoint controller driver (Kunihiko Hayashi)
      
        Synopsys DesignWare PCIe controller driver:
      
         - Program outbound ATU upper limit register (Alan Mikhak)
      
         - Fix inner MSI IRQ domain registration (Marc Zyngier)
      
        Miscellaneous:
      
         - Check for platform_get_irq() failure consistently (negative return
           means failure) (Aman Sharma)
      
         - Fix several runtime PM get/put imbalances (Dinghao Liu)
      
         - Use flexible-array and struct_size() helpers for code cleanup
           (Gustavo A. R. Silva)
      
         - Update & fix issues in bridge emulation of PCIe registers (Jon
           Derrick)
      
         - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc)
           (Krzysztof Wilczyński)
      
         - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)"
      
      * tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits)
        PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver
        PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints
        PCI/DPC: Print IRQ number used by port
        PCI/AER: Use "aer" variable for capability offset
        PCI/AER: Remove redundant dev->aer_cap checks
        PCI/AER: Remove redundant pci_is_pcie() checks
        PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership
        PCI: tegra: Fix runtime PM imbalance on error
        PCI: vmd: Filter resource type bits from shadow register
        PCI: tegra194: Fix runtime PM imbalance on error
        dt-bindings: PCI: Add UniPhier PCIe endpoint controller description
        PCI: hv: Use struct_size() helper
        PCI: Rename _DSM constants to align with spec
        PCI: Avoid FLR for AMD Starship USB 3.0
        PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0
        x86/PCI: Drop unused xen_register_pirq() gsi_override parameter
        PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port
        PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
        PCI: dwc: Fix inner MSI IRQ domain registration
        PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname()
        ...
      3925c3bb
    • Zou Wei's avatar
      hpfs: fix warning due to superfluous semicolon · 9fa88c5d
      Zou Wei authored
      Fixes coccicheck warning:
      
        fs/hpfs/buffer.c:56:2-3: Unneeded semicolon
      Reported-by: default avatarHulk Robot <hulkci@huawei.com>
      Signed-off-by: default avatarZou Wei <zou_wei@huawei.com>
      Signed-off-by: default avatarMikulas Patocka <mikulas@twibright.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9fa88c5d
    • Linus Torvalds's avatar
      Merge branch 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq · fe3bc8a9
      Linus Torvalds authored
      Pull workqueue updates from Tejun Heo:
       "Mostly cleanups and other trivial changes.
      
        The only interesting change is Sebastian's rcuwait conversion for RT"
      
      * 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
        workqueue: use BUILD_BUG_ON() for compile time test instead of WARN_ON()
        workqueue: fix a piece of comment about reserved bits for work flags
        workqueue: remove useless unlock() and lock() in series
        workqueue: void unneeded requeuing the pwq in rescuer thread
        workqueue: Convert the pool::lock and wq_mayday_lock to raw_spinlock_t
        workqueue: Use rcuwait for wq_manager_wait
        workqueue: Remove unnecessary kfree() call in rcu_free_wq()
        workqueue: Fix an use after free in init_rescuer()
        workqueue: Use IS_ERR and PTR_ERR instead of PTR_ERR_OR_ZERO.
      fe3bc8a9
    • Linus Torvalds's avatar
      Merge branch 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup · 4a7e89c5
      Linus Torvalds authored
      Pull cgroup updates from Tejun Heo:
       "Just two patches: one to add system-level cpu.stat to the root cgroup
        for convenience and a trivial comment update"
      
      * 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
        cgroup: add cpu.stat file to root cgroup
        cgroup: Remove stale comments
      4a7e89c5
    • Linus Torvalds's avatar
      Merge tag 'integrity-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity · 3c0ad98c
      Linus Torvalds authored
      Pull integrity updates from Mimi Zohar:
       "The main changes are extending the TPM 2.0 PCR banks with bank
        specific file hashes, calculating the "boot_aggregate" based on other
        TPM PCR banks, using the default IMA hash algorithm, instead of SHA1,
        as the basis for the cache hash table key, and preventing the mprotect
        syscall to circumvent an IMA mmap appraise policy rule.
      
         - In preparation for extending TPM 2.0 PCR banks with bank specific
           digests, commit 0b6cf6b9 ("tpm: pass an array of
           tpm_extend_digest structures to tpm_pcr_extend()") modified
           tpm_pcr_extend(). The original SHA1 file digests were
           padded/truncated, before being extended into the other TPM PCR
           banks. This pull request calculates and extends the TPM PCR banks
           with bank specific file hashes completing the above change.
      
         - The "boot_aggregate", the first IMA measurement list record, is the
           "trusted boot" link between the pre-boot environment and the
           running OS. With TPM 2.0, the "boot_aggregate" record is not
           limited to being based on the SHA1 TPM PCR bank, but can be
           calculated based on any enabled bank, assuming the hash algorithm
           is also enabled in the kernel.
      
        Other changes include the following and five other bug fixes/code
        clean up:
      
         - supporting both a SHA1 and a larger "boot_aggregate" digest in a
           custom template format containing both the the SHA1 ('d') and
           larger digests ('d-ng') fields.
      
         - Initial hash table key fix, but additional changes would be good"
      
      * tag 'integrity-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
        ima: Directly free *entry in ima_alloc_init_template() if digests is NULL
        ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()
        ima: Directly assign the ima_default_policy pointer to ima_rules
        ima: verify mprotect change is consistent with mmap policy
        evm: Fix possible memory leak in evm_calc_hmac_or_hash()
        ima: Set again build_ima_appraise variable
        ima: Remove redundant policy rule set in add_rules()
        ima: Fix ima digest hash table key calculation
        ima: Use ima_hash_algo for collision detection in the measurement list
        ima: Calculate and extend PCR with digests in ima_template_entry
        ima: Allocate and initialize tfm for each PCR bank
        ima: Switch to dynamically allocated buffer for template digests
        ima: Store template digest directly in ima_template_entry
        ima: Evaluate error in init_ima()
        ima: Switch to ima_hash_algo for boot aggregate
      3c0ad98c
    • Denis Efremov's avatar
      kbuild: add variables for compression tools · 8dfb61dc
      Denis Efremov authored
      Allow user to use alternative implementations of compression tools,
      such as pigz, pbzip2, pxz. For example, multi-threaded tools to
      speed up the build:
      $ make GZIP=pigz BZIP2=pbzip2
      
      Variables _GZIP, _BZIP2, _LZOP are used internally because original env
      vars are reserved by the tools. The use of GZIP in gzip tool is obsolete
      since 2015. However, alternative implementations (e.g., pigz) still rely
      on it. BZIP2, BZIP, LZOP vars are not obsolescent.
      
      The credit goes to @grsecurity.
      
      As a sidenote, for multi-threaded lzma, xz compression one can use:
      $ export XZ_OPT="--threads=0"
      Signed-off-by: default avatarDenis Efremov <efremov@linux.com>
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      8dfb61dc
    • Jonas Zeiger's avatar
      Makefile: install modules.builtin even if CONFIG_MODULES=n · e0b250b5
      Jonas Zeiger authored
      Many applications check for available kernel features via:
      
        - /proc/modules (loaded modules, present if CONFIG_MODULES=y)
        - $(MODLIB)/modules.builtin (builtin modules)
      
      They fail to detect features if the kernel was built with CONFIG_MODULES=n
      and modules.builtin isn't installed.
      
      Therefore, add the target "_builtin_inst_" and make "install" and
      "modules_install" depend on it.
      
      Tests results:
      
        - make install: kernel image is copied as before, modules.builtin copied
        - make modules_install: (CONFIG_MODULES=n) nothing is copied, exit 1
      Signed-off-by: default avatarJonas Zeiger <jonas.zeiger@talpidae.net>
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      e0b250b5
    • ashimida's avatar
      mksysmap: Fix the mismatch of '.L' symbols in System.map · 72d24acc
      ashimida authored
      When System.map was generated, the kernel used mksysmap to
      filter the kernel symbols, but all the symbols with the
      second letter 'L' in the kernel were filtered out, not just
      the symbols starting with 'dot + L'.
      
      For example:
      ashimida@ubuntu:~/linux$ cat System.map |grep ' .L'
      ashimida@ubuntu:~/linux$ nm -n vmlinux |grep ' .L'
      ffff0000088028e0 t bLength_show
      ......
      ffff0000092e0408 b PLLP_OUTC_lock
      ffff0000092e0410 b PLLP_OUTA_lock
      
      The original intent should be to filter out all local symbols
      starting with '.L', so the dot should be escaped.
      
      Fixes: 00902e98 ("mksysmap: Add h8300 local symbol pattern")
      Signed-off-by: default avatarashimida <ashimida@linux.alibaba.com>
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      72d24acc
    • Masahiro Yamada's avatar
      kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS · c0901577
      Masahiro Yamada authored
      Commit d503ac53 ("kbuild: rename LDFLAGS to KBUILD_LDFLAGS") missed
      to update the documentation.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      c0901577
    • Masahiro Yamada's avatar
      modpost: change elf_info->size to size_t · 3b09efc4
      Masahiro Yamada authored
      Align with the mmap / munmap APIs.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      3b09efc4
    • Masahiro Yamada's avatar
      modpost: remove is_vmlinux() helper · 4de7b629
      Masahiro Yamada authored
      Now that is_vmlinux() is called only in new_module(), we can inline
      the function call.
      
      modname is the basename with '.o' is stripped. No need to compare it
      with 'vmlinux.o'.
      
      vmlinux is always located at the current working directory. No need
      to strip the directory path.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      4de7b629
    • Masahiro Yamada's avatar
      modpost: strip .o from modname before calling new_module() · a82f794c
      Masahiro Yamada authored
      new_module() conditionally strips the .o because the modname has .o
      suffix when it is called from read_symbols(), but no .o when it is
      called from read_dump().
      
      It is clearer to strip .o in read_symbols().
      
      I also used flexible-array for mod->name.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      a82f794c
    • Masahiro Yamada's avatar
      modpost: set have_vmlinux in new_module() · 858b937d
      Masahiro Yamada authored
      Set have_vmlinux flag in a single place.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      858b937d
    • Masahiro Yamada's avatar
      modpost: remove mod->skip struct member · 0b19d54c
      Masahiro Yamada authored
      The meaning of 'skip' is obscure since it does not explain
      "what to skip".
      
      mod->skip is set when it is vmlinux or the module info came from
      a dump file.
      
      So, mod->skip is equivalent to (mod->is_vmlinux || mod->from_dump).
      
      For the check in write_namespace_deps_files(), mod->is_vmlinux is
      unneeded because the -d option is not passed in the first pass of
      modpost.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      0b19d54c
    • Masahiro Yamada's avatar
      modpost: add mod->is_vmlinux struct member · 5a438af9
      Masahiro Yamada authored
      is_vmlinux() is called in several places to check whether the current
      module is vmlinux or not.
      
      It is faster and clearer to check mod->is_vmlinux flag.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      5a438af9
    • Masahiro Yamada's avatar
      modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}() · 1be5fa6c
      Masahiro Yamada authored
      check_exports() is never called for vmlinux because mod->skip is set
      for vmlinux.
      
      Hence, check_for_gpl_usage() and check_for_unused() are not called
      for vmlinux, either. is_vmlinux() is always false here.
      
      Remove the is_vmlinux() calls, and hard-code the ".ko" suffix.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      1be5fa6c
    • Masahiro Yamada's avatar
      modpost: remove mod->is_dot_o struct member · 3379576d
      Masahiro Yamada authored
      Previously, there were two cases where mod->is_dot_o is unset:
      
      [1] the executable 'vmlinux' in the second pass of modpost
      [2] modules loaded by read_dump()
      
      I think [1] was intended usage to distinguish 'vmlinux.o' and 'vmlinux'.
      Now that modpost does not parse the executable 'vmlinux', this case
      does not happen.
      
      [2] is obscure, maybe a bug. Module.symver stores module paths without
      extension. So, none of modules loaded by read_dump() has the .o suffix,
      and new_module() unsets ->is_dot_o. Anyway, it is not a big deal because
      handle_symbol() is not called for the case.
      
      To sum up, all the parsed ELF files are .o files.
      
      mod->is_dot_o is unneeded.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      3379576d
    • Masahiro Yamada's avatar
      modpost: move -d option in scripts/Makefile.modpost · 859c926a
      Masahiro Yamada authored
      Collect options for modules into a single place.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      859c926a
    • Masahiro Yamada's avatar
      modpost: remove -s option · 467b82d7
      Masahiro Yamada authored
      The -s option was added by commit 8d8d8289 ("kbuild: do not do
      section mismatch checks on vmlinux in 2nd pass").
      
      Now that the second pass does not parse vmlinux, this option is
      unneeded.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      467b82d7
    • Masahiro Yamada's avatar
      modpost: remove get_next_text() and make {grab,release_}file static · 75893572
      Masahiro Yamada authored
      get_next_line() is no longer used. Remove.
      
      grab_file() and release_file() are only used in modpost.c. Make them
      static.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      75893572
    • Masahiro Yamada's avatar
      modpost: use read_text_file() and get_line() for reading text files · 70f30cfe
      Masahiro Yamada authored
      grab_file() mmaps a file, but it is not so efficient here because
      get_next_line() copies every line to the temporary buffer anyway.
      
      read_text_file() and get_line() are simpler. get_line() exploits the
      library function strchr().
      
      Going forward, the missing *.symvers or *.cmd is a fatal error.
      This should not happen because scripts/Makefile.modpost guards the
      -i option files with $(wildcard $(input-symdump)).
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      70f30cfe
    • Masahiro Yamada's avatar
      modpost: avoid false-positive file open error · 7c8f5662
      Masahiro Yamada authored
      One problem of grab_file() is that it cannot distinguish the following
      two cases:
      
       - It cannot read the file (the file does not exist, or read permission
         is not set)
      
       - It can read the file, but the file size is zero
      
      This is because grab_file() calls mmap(), which requires the mapped
      length is greater than 0. Hence, grab_file() fails for both cases.
      
      If an empty header file were included for checksum calculation, the
      following warning would be printed:
      
        WARNING: modpost: could not open ...: Invalid argument
      
      An empty file is a valid source file, so it should not fail.
      
      Use read_text_file() instead. It can read a zero-length file.
      Then, parse_file() will succeed with doing nothing.
      
      Going forward, the first case (it cannot read the file) is a fatal
      error. If the source file from which an object was compiled is missing,
      something went wrong.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      7c8f5662
    • Masahiro Yamada's avatar
      modpost: fix potential mmap'ed file overrun in get_src_version() · f531c1b5
      Masahiro Yamada authored
      I do not know how reliably this function works, but it looks dangerous
      to me.
      
          strchr(sources, '\n');
      
      ... continues searching until it finds '\n' or it reaches the '\0'
      terminator. In other words, 'sources' should be a null-terminated
      string.
      
      However, grab_file() just mmaps a file, so 'sources' is not terminated
      with null byte. If the file does not contain '\n' at all, strchr() will
      go beyond the mmap'ed memory.
      
      Use read_text_file(), which loads the file content into a malloc'ed
      buffer, appending null byte.
      
      Here we are interested only in the first line of *.mod files. Use
      get_line() helper to get the first line.
      
      This also makes missing *.mod file a fatal error.
      
      Commit 4be40e22 ("kbuild: do not emit src version warning for
      non-modules") ignored missing *.mod files.
      
      I do not fully understand what that commit addressed, but commit
      91341d4b ("kbuild: introduce new option to enhance section mismatch
      analysis") introduced partial section checks by using modpost. built-in.o
      was parsed by modpost. Even modules had a problem because *.mod files
      were created after the modpost check.
      
      Commit b7dca6dd ("kbuild: create *.mod with full directory path and
      remove MODVERDIR") stopped doing that. Now that modpost is only invoked
      after the directory descend, *.mod files should always exist at the
      modpost stage.
      Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
      f531c1b5