- 22 Oct, 2010 40 commits
-
-
Otavio Salvador authored
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
matt mooney authored
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Felipe Balbi authored
commit 633ba7876b96ec339ef685357e2f7c60b5a8ce85 broke g_file_storage functionality by enabling AUTOCLEAR on all cases without caring for all gadget drivers. This patch will only enable AUTOCLEAR if our endpoint's FIFO was configured with double buffering support. Note this is not a complete fix, double buffered case still doesn't work always, but that hasn't been working for quite some time. Other than reverting the entire commit and breaking testusb with double buffered case again, I decided it was better to fix the single buffered case and spend more time fixing double buffered case properly. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ming Lei authored
This patch fixes the problem reported by Sergei: >how come? we need to send ZLP before giving back the request. >Well, look at the code ionce again. We need to send ZLP *after* >request->actual == request->length, but as the check is inserted >after the ZLP send, ZLP *may* be sent once the first DMA completes, >not the last. The patch also has been discussed on the link below: http://marc.info/?t=128454814900001&r=1&w=2Signed-off-by: Ming Lei <tom.leiming@gmail.com> Reported-by: Sergei Shtylyov <sshtylyov@mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Heikki Krogerus authored
This will ignore any SESSREQ interrupt if musb is B state. Charger detection may cause spurious SESSREQ interrupts. Signed-off-by: Heikki Krogerus <ext-heikki.krogerus@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Sergei Shtylyov authored
musb_g_rx() always returns if next_request() call yields NULL, so the DBG() near the function's end can never be invoked. Remove it along with unneeded 'return'; also remove the duplicate 'request' check... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jon Povey authored
Wrap flags with uninitialized_var() to suppress this: drivers/usb/musb/cppi_dma.c:1158: warning: 'flags' may be used uninitialized in this function Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
T. S., Anil Kumar authored
Add support for MUSB Host DMA transfers greater than max channel length, so that such transfers won't be truncated. Signed-off-by: Anil Shetty <anil@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Bob Liu authored
Since not all platforms are using the same offset 0x10 in musb_save/restore_context() eg Blackfin the offset is 0x40, Change the indexed address to direct. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Maulik Mankad authored
The USB stack maps the buffer for DMA if the controller supports DMA. MUSB controller can perform DMA as well as PIO transfers. The buffer needs to be unmapped before CPU can perform PIO data transfers. Export unmap_urb_for_dma() so that drivers can perform the DMA unmapping in a sane way. Signed-off-by: Maulik Mankad <x0082077@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Anil Shetty authored
MUSB's DMA controller max channel length was set to 64k. Transfer length greater than this max value is being truncated. Signed-off-by: Anil Shetty <anil@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ming Lei authored
This patch has been tested OK on beagle B5 board and use usbtest #15 and #16 as testcase. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Sergei Shtylyov <sshtylyov@mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Sergei Shtylyov authored
Texas Instruments DA8xx/OMAP-L1x glue layer for the MUSBMHRDC driver. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Yadviga Grigorieva <yadviga@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Sergei Shtylyov authored
Enabling CONFIG_USB_MUSB_DEBUG option causes -DDEBUG to be added to gcc's command line, however the DBG() macro doesn't depend on DEBUG, so that the debugging messages get printed regardless of the option, and I don't think that this was intended. Get rid of otherwise unused xprintk() macro and make DBG() macro directly call pr_debug() which only results in the actual code generated if DEBUG is defined. This change makes musb_hdrc.o ~30% less in size with CONFIG_USB_MUSB_DEBUG disabled (in host mode). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Tomoki Sekiyama authored
This fixes the memory leak on disconnecting the device. In addition, it fixes some messages corrupted by incorrect encoding. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
This assigns the minor number 192 to the yurex driver. We also fix up the previous usb minor number entry, it was wrong. Cc: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Tomoki Sekiyama authored
Meywa-Denki/Kayac YUREX is a leg-shakes sensor device. See http://bbu.kayac.com/en/about/ for further information. This driver support read/write the leg-shakes counter in the device via a device file /dev/yurex[0-9]*. [minor coding style cleanups fixed by gregkh] Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Michal Nazarewicz authored
This commit changes storage_common.c and file_storage.c to reuse definitions from linux/usb/storage.h header file. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Matthew Wilcox authored
USB Attached SCSI is a new protocol specified jointly by the SCSI T10 committee and the USB Implementors Forum. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> [mina86@mina86.com: updated to use new USB_ prefix] Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Matthew Wilcox authored
The libusual header file is hard to use from code that isn't part of libusual. As the comment suggests, these definitions are moved to their own header file, paralleling other USB classes. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> [mina86@mina86.com: updated to use USB_ prefix and added #include guard] Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> index 0000000..d7fc910
-
Michal Nazarewicz authored
This commit changes prefix for some of the USB mass storage class related macros (ie. USB_SC_ for subclass and USB_PR_ for class). Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Matthias G. Eckermann authored
this patch to qcserial.c enables the Diagnostics Monitor and NMEA GPS ports on Qualcomm Gobi 2000 devices. A Gobi 2000 device will provide 3 serial ports: # /dev/ttyUSB0 -> Diagnostics # /dev/ttyUSB1 -> 3G Modem # /dev/ttyUSB2 -> NMEA GPS port * The Diagnostics Monitor uses Qualcomm's DM protocol; I used libqcdm (ModemManager) to talk to it, found it working, but at least DM commands 12 and 64 are not implemented on my device (Gobi 2000 built into Thinkpad x100e). * Functionality of the 3G Modem port remains unchanged. * The GPS port and how to enable it has been confirmed now in the Gobi 3000 source code at: https://www.codeaurora.org/patches/quic/gobi/ Enable/disable GPS via: echo "\$GPS_START" > /dev/ttyUSB2 # use GPS echo "\$GPS_STOP" > /dev/ttyUSB2 Signed-off-by: Matthias G. Eckermann <mge@arcor.de>
-
Yauheni Kaliuta authored
In usb_cdc_ncm_dpe32 the fields are 32 bit long and according to usb style (hungarian notation) should be called dwDatagramIndex and dwDatagramLength (see CDC NCM subclass spec, 3.3.2). Actually, they were called wDatagramIndex, wDatagramLength. Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Johan Hovold authored
This reverts commit 6a1a82df. RTS and DTR should not be modified based on CRTSCTS when calling set_termios. Modem control lines are raised at port open by the tty layer and should stay raised regardless of whether hardware flow control is enabled or not. This is in conformance with the way serial ports work today and many applications depend on this behaviour to be able to talk to hardware implementing hardware flow control (without the applications actually using it). Hardware which expects different behaviour on these lines can always use TIOCMSET/TIOCMBI[SC] after port open to change them. Reported-by: Daniel Mack <daniel@caiaq.de> Reported-by: Dave Mielke <dave@mielke.cc> Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Matthew Garrett authored
Seems to work fine in my testing. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jean-Christophe PLAGNIOL-VILLARD authored
to ensure gpio_is_valid return false Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Yauheni Kaliuta authored
Make a dedicated structure for datagram pointer entry. There is no explicit declaration in the spec, but it's used by the host implementation and makes the structure more clear. Add some missed constants from the spec Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Yauheni Kaliuta authored
This reverts commit 65e0b499. Since the host and gadget implementations are different, there is no common code for the file, remove for now. Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Yauheni Kaliuta authored
Some typos were in the initial commit, make the spelling according to the spec. Add some more comments. Also change constant names according to the style of the rest of the file Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Enrico Mioso authored
This patch, adds to the option driver the Onda Communication (http://www.ondacommunication.com) vendor id, and the MT825UP modem device id. Note that many variants of this same device are being release here in Italy (at least one or two per telephony operator). These devices are perfectly equivalent except for some predefined settings (which can be changed of course). It should be noted that most ONDA devices are allready supported (they used other vendor's ids in the past). The patch seems working fine here, and the rest of the driver seems uninfluenced. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
DJ Delorie authored
RX610 development board by Renesas Bus 001 Device 024: ID 045b:0053 Hitachi, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x045b Hitachi, Ltd idProduct 0x0053 bcdDevice 1.00 iManufacturer 1 Silicon Labs iProduct 2 RX-Stick iSerial 3 0001 . . . http://am.renesas.com/rx610stickSigned-off-by: DJ Delorie <dj@delorie.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Keshava Munegowda authored
The un-registration of OHCI driver was not done in the ohci_hcd_mod_exit function. This was affecting rmmod command not to work for OMAP3 platforms. The platform driver un-registration for OMAP3 platforms is perfomed while removing the OHCI module from kernel. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-of-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Rich Mattes authored
Adds support for Accesio USB to Serial adapters, which are built around FTDI FT232 UARTs. Tested with the Accesio USB-COM-4SM. Signed-off-by: Rich Mattes <richmattes@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
The /sys/kernel/debug/usb/devices file doesn't know about Wireless or SuperSpeed USB. This patch (as1416b) teaches it, and updates the Documentation/usb/proc_sub_info.txt file accordingly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Vrabel <david.vrabel@csr.com> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Andy Shevchenko authored
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mauro Carvalho Chehab authored
There are lots of ZTE USB id's currently not covered by usb/serial. Adds them, to allow those devices to work properly on Linux. While here, put the USB ID's for 0x2002/0x2003 at the sorted order. This patch is based on zte.c file found on MF645. PS.: The ZTE driver is commenting the USB ID for 0x0053. It also adds, commented, an USB ID for 0x0026. Not sure why, but I think that 0053 is used by their devices in storage mode only. So, I opted to keep the comment on this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Javier Martinez Canillas authored
In today linux-next I got a compile error on usb/host/isp1362-hcd: drivers/usb/host/isp1362-hcd.c: In function ‘isp1362_hub_control’: drivers/usb/host/isp1362-hcd.c:1680: error: ‘ohci’ undeclared (first use in this function) The problem is when the CONFIG_USB_OTG option is enabled. ohci variable is never declared and there isn't any CONFIG_USB_OTG dependent code besides the portion defined in isp1362_hub_control. So I think that maybe USB OTG support is not needed/supported. This patch removes the CONFIG_USB_OTG dependent block so the driver can compile cleanly. Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Roger Quadros authored
The composite gadget will OOPS if the host sends a control request targetted to an interface of an un-configured composite device. This patch prevents this. The OOPS was observed during WHQL USB CV tests. With this patch, the device STALLs as per requirement. Failing test case: From host do the following. I used libusb-1.0 1) Set configuration to zero. libusb_control_transfer(device_handle, 0, /* standard OUT */ 0x9, /* setConfiguration */ 0, 0, NULL, 0, 0); 2) Query current configuratioan. libusb_control_transfer(device_handle, 0x80, /* standard IN*/ 0x8, /* getConfiguration */ 0, 0, data, 1, 0); 3) Send the non-standard ctrl transfer targetted to interface libusb_control_transfer(device_handle, 0x81, /* standard IN to interface*/ 0x6, /* getDescriptor */ 0x2300, 0, data, 0x12, 0); Signed-off-by: Roger Quadros <roger.quadros@nokia.com> Cc: stable <stable@kernel.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Robert Lukassen <robert.lukassen@tomtom.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-