- 01 Oct, 2013 16 commits
-
-
Steffen Klassert authored
Git commit 0e6fbc5b ("ip_tunnels: extend iptunnel_xmit()") moved the IP header installation to iptunnel_xmit() and changed skb_push() to __skb_push(). This makes possible bugs hard to track down, so change it back to skb_push(). Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
Currently we can not update the tunnel parameters of the fallback tunnels because we don't find them in the hash lists. Fix this by adding them on initialization. Bug was introduced with commit c5441932 ("GRE: Refactor GRE tunneling code.") Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
We might extend the used aera of a skb beyond the total headroom when we install the ipip header. Fix this by calling skb_cow_head() unconditionally. Bug was introduced with commit c5441932 ("GRE: Refactor GRE tunneling code.") Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== The following patchset contains Netfilter/IPVS fixes for your net tree, they are: * Fix BUG_ON splat due to malformed TCP packets seen by synproxy, from Patrick McHardy. * Fix possible weight overflow in lblc and lblcr schedulers due to 32-bits arithmetics, from Simon Kirby. * Fix possible memory access race in the lblc and lblcr schedulers, introduced when it was converted to use RCU, two patches from Julian Anastasov. * Fix hard dependency on CPU 0 when reading per-cpu stats in the rate estimator, from Julian Anastasov. * Fix race that may lead to object use after release, when invoking ipvsadm -C && ipvsadm -R, introduced when adding RCU, from Julian Anastasov. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Manish Chopra authored
o Interface needs to be brought down and up while configuring SR-IOV. Protect interface up/down using rtnl_lock()/rtnl_unlock() Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ricardo Ribalda authored
The dma descriptors indexes are only initialized on the probe function. If a packet is on the buffer when temac_stop is called, the dma descriptors indexes can be left on a incorrect state where no other package can be sent. So an interface could be left in an usable state after ifdow/ifup. This patch makes sure that the descriptors indexes are in a proper status when the device is open. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
Since commit c93bdd0e ("netvm: allow skb allocation to use PFMEMALLOC reserves"), hole size is one bit less than what is written in the comment. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://gitorious.org/linux-can/linux-canDavid S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
Salam Noureddine authored
It is possible for the timer handlers to run after the call to ipv6_mc_down so use in6_dev_put instead of __in6_dev_put in the handler function in order to do proper cleanup when the refcnt reaches 0. Otherwise, the refcnt can reach zero without the inet6_dev being destroyed and we end up leaking a reference to the net_device and see messages like the following, unregister_netdevice: waiting for eth0 to become free. Usage count = 1 Tested on linux-3.4.43. Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Salam Noureddine authored
It is possible for the timer handlers to run after the call to ip_mc_down so use in_dev_put instead of __in_dev_put in the handler function in order to do proper cleanup when the refcnt reaches 0. Otherwise, the refcnt can reach zero without the in_device being destroyed and we end up leaking a reference to the net_device and see messages like the following, unregister_netdevice: waiting for eth0 to become free. Usage count = 1 Tested on linux-3.4.43. Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bartlomiej Zolnierkiewicz authored
__initdata tag should be placed between the variable name and equal sign for the variable to be placed in the intended .init.data section. In this particular case __initdata is incorrect as moxart_mac_driver can be used after the driver gets initialized. Also while at it static-ize moxart_mac_driver. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
gre_hlen already accounts for sizeof(struct ipv6_hdr) + gre header, so initialize max_headroom to zero. Otherwise the if (encap_limit >= 0) { max_headroom += 8; mtu -= 8; } increments an uninitialized variable before max_headroom was reset. Found with coverity: 728539 Cc: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aida Mynzhasova authored
Currently IEEE 1588 timer reference clock source is determined through hard-coded value in gianfar_ptp driver. This patch allows to select ptp clock source by means of device tree file node. For instance: fsl,cksel = <0>; for using external (TSEC_TMR_CLK input) high precision timer reference clock. Other acceptable values: <1> : eTSEC system clock <2> : eTSEC1 transmit clock <3> : RTC clock input When this attribute isn't used, eTSEC system clock will serve as IEEE 1588 timer reference clock. Signed-off-by: Aida Mynzhasova <aida.mynzhasova@skitlab.ru> Acked-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit 894116bd. I applied the wrong version of this patch, correct version coming up. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neil Horman authored
Recently grabbed this report: https://bugzilla.redhat.com/show_bug.cgi?id=1005567 Of an issue in which the bonding driver, with an attached vlan encountered the following errors when bond0 was taken down and back up: dummy1: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken. The error occurs because, during __bond_release_one, if we release our last slave, we take on a random mac address and issue a NETDEV_CHANGEADDR notification. With an attached vlan, the vlan may see that the vlan and bond mac address were in sync, but no longer are. This triggers a call to dev_uc_add and dev_set_rx_mode, which enables IFF_PROMISC on the bond device. Then, when we complete __bond_release_one, we use the current state of the bond flags to determine if we should decrement the promiscuity of the releasing slave. But since the bond changed promiscuity state during the release operation, we incorrectly decrement the slave promisc count when it wasn't in promiscuous mode to begin with, causing the above error Fix is pretty simple, just cache the bonding flags at the start of the function and use those when determining the need to set promiscuity. This is also needed for the ALLMULTI flag CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Mark Wu <wudxw@linux.vnet.ibm.com> CC: "David S. Miller" <davem@davemloft.net> Reported-by: Mark Wu <wudxw@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
When TCP Small Queues was added, we used a sysctl to limit amount of packets queues on Qdisc/device queues for a given TCP flow. Problem is this limit is either too big for low rates, or too small for high rates. Now TCP stack has rate estimation in sk->sk_pacing_rate, and TSO auto sizing, it can better control number of packets in Qdisc/device queues. New limit is two packets or at least 1 to 2 ms worth of packets. Low rates flows benefit from this patch by having even smaller number of packets in queues, allowing for faster recovery, better RTT estimations. High rates flows benefit from this patch by allowing more than 2 packets in flight as we had reports this was a limiting factor to reach line rate. [ In particular if TX completion is delayed because of coalescing parameters ] Example for a single flow on 10Gbp link controlled by FQ/pacing 14 packets in flight instead of 2 $ tc -s -d qd qdisc fq 8001: dev eth0 root refcnt 32 limit 10000p flow_limit 100p buckets 1024 quantum 3028 initial_quantum 15140 Sent 1168459366606 bytes 771822841 pkt (dropped 0, overlimits 0 requeues 6822476) rate 9346Mbit 771713pps backlog 953820b 14p requeues 6822476 2047 flow, 2046 inactive, 1 throttled, delay 15673 ns 2372 gc, 0 highprio, 0 retrans, 9739249 throttled, 0 flows_plimit Note that sk_pacing_rate is currently set to twice the actual rate, but this might be refined in the future when a flow is in congestion avoidance. Additional change : skb->destructor should be set to tcp_wfree(). A future patch (for linux 3.13+) might remove tcp_limit_output_bytes Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 30 Sep, 2013 12 commits
-
-
Peter Korsgaard authored
Pass-all-multicast is controlled by bit 3 in RX control, not bit 2 (pass undersized frames). Reported-by: Joseph Chang <joseph_chang@davicom.com.tw> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
fq_reset() should drops all packets in queue, including throttled flows. This patch moves code from fq_destroy() to fq_reset() to do the cleaning. fq_change() must stop calling fq_dequeue() if all remaining packets are from throttled flows. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
In commit 8ed78166 ("flow_keys: include thoff into flow_keys for later usage"), we missed that existing code was using nhoff as a temporary variable that could not always contain transport header offset. This is not a problem for TCP/UDP because port offset (@poff) is 0 for these protocols. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Liu authored
Signed-off-by: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Durrant authored
When the frontend state changes netback now specifies its desired state to a new function, set_backend_state(), which transitions through any necessary intermediate states. This fixes an issue observed with some old Windows frontend drivers where they failed to transition through the Closing state and netback would not behave correctly. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Marks authored
Consider the scenario where an IPv6 router is advertising a fixed preferred_lft of 1800 seconds, while the valid_lft begins at 3600 seconds and counts down in realtime. A client should reset its preferred_lft to 1800 every time the RA is received, but a bug is causing Linux to ignore the update. The core problem is here: if (prefered_lft != ifp->prefered_lft) { Note that ifp->prefered_lft is an offset, so it doesn't decrease over time. Thus, the comparison is always (1800 != 1800), which fails to trigger an update. The most direct solution would be to compute a "stored_prefered_lft", and use that value in the comparison. But I think that trying to filter out unnecessary updates here is a premature optimization. In order for the filter to apply, both of these would need to hold: - The advertised valid_lft and preferred_lft are both declining in real time. - No clock skew exists between the router & client. So in this patch, I've set "update_lft = 1" unconditionally, which allows the surrounding code to be greatly simplified. Signed-off-by: Paul Marks <pmarks@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
While sending packet skb_cow_head() can change skb header which invalidates inner_iph pointer to skb header. Following patch avoid using it. Found by code inspection. This bug was introduced by commit 0e6fbc5b (ip_tunnels: extend iptunnel_xmit()). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aleksander Morgado authored
Cinterion PLXX LTE devices have a 0x0060 product ID, not 0x12d1. The blacklisting in the serial/option driver does actually use the correct PID, as per commit 8ff10bdb ('USB: Blacklisted Cinterion's PLxx WWAN Interface'). CC: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> CC: Christian Schmiedl <christian.schmiedl@gemalto.com> CC: Nicolaus Colberg <nicolaus.colberg@gemalto.com> Signed-off-by: Aleksander Morgado <aleksander@lanedo.com> Acked-by: Bjørn Mork <bjorn@mork.no> Acked-by: Christian Schmiedl <christian.schmiedl@gemalto.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aida Mynzhasova authored
Currently IEEE 1588 timer reference clock source is determined through hard-coded value in gianfar_ptp driver. This patch allows to select ptp clock source by means of device tree file node. For instance: fsl,cksel = <0>; for using external (TSEC_TMR_CLK input) high precision timer reference clock. Other acceptable values: <1> : eTSEC system clock <2> : eTSEC1 transmit clock <3> : RTC clock input When this attribute isn't used, eTSEC system clock will serve as IEEE 1588 timer reference clock. Signed-off-by: Aida Mynzhasova <aida.mynzhasova@skitlab.ru> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
Use of RCU api makes vxlan code easier to understand. It also fixes bug due to missing ACCESS_ONCE() on sk_user_data dereference. In rare case without ACCESS_ONCE() compiler might omit vs on sk_user_data dereference. Compiler can use vs as alias for sk->sk_user_data, resulting in multiple sk_user_data dereference in rcu read context which could change. CC: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marc Kleine-Budde authored
In the flexcan_chip_start() function first the flexcan core is going through the soft reset sequence, then the RX FIFO is enabled. With the hardware is put into FIFO mode, message buffers 1...7 are reserved by the FIFO engine. The remaining message buffers are in reset default values. This patch removes the bogus initialization of the message buffers, as it causes an imprecise external abort on imx6. Cc: linux-stable <stable@vger.kernel.org> Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
Patrick McHardy authored
TCP packets hitting the SYN proxy through the SYNPROXY target are not validated by TCP conntrack. When th->doff is below 5, an underflow happens when calculating the options length, causing skb_header_pointer() to return NULL and triggering the BUG_ON(). Handle this case gracefully by checking for NULL instead of using BUG_ON(). Reported-by: Martin Topholm <mph@one.com> Tested-by: Martin Topholm <mph@one.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
- 28 Sep, 2013 4 commits
-
-
Eric Dumazet authored
A host might need net_secret[] and never open a single socket. Problem added in commit aebda156 ("net: defer net_secret[] initialization") Based on prior patch from Hannes Frederic Sowa. Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@strressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
There is currently serialization network namespaces exiting and network devices exiting as the final part of netdev_run_todo does not happen under the rtnl_lock. This is compounded by the fact that the only list of devices unregistering in netdev_run_todo is local to the netdev_run_todo. This lack of serialization in extreme cases results in network devices unregistering in netdev_run_todo after the loopback device of their network namespace has been freed (making dst_ifdown unsafe), and after the their network namespace has exited (making the NETDEV_UNREGISTER, and NETDEV_UNREGISTER_FINAL callbacks unsafe). Add the missing serialization by a per network namespace count of how many network devices are unregistering and having a wait queue that is woken up whenever the count is decreased. The count and wait queue allow default_device_exit_batch to wait until all of the unregistration activity for a network namespace has finished before proceeding to unregister the loopback device and then allowing the network namespace to exit. Only a single global wait queue is used because there is a single global lock, and there is a single waiter, per network namespace wait queues would be a waste of resources. The per network namespace count of unregistering devices gives a progress guarantee because the number of network devices unregistering in an exiting network namespace must ultimately drop to zero (assuming network device unregistration completes). The basic logic remains the same as in v1. This patch is now half comment and half rtnl_lock_unregistering an expanded version of wait_event performs no extra work in the common case where no network devices are unregistering when we get to default_device_exit_batch. Reported-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Catalin\(ux\) M. BOIE authored
When a router is doing DNAT for 6to4/6rd packets the latest anti-spoofing commit 218774dc ("ipv6: add anti-spoofing checks for 6to4 and 6rd") will drop them because the IPv6 address embedded does not match the IPv4 destination. This patch will allow them to pass by testing if we have an address that matches on 6to4/6rd interface. I have been hit by this problem using Fedora and IPV6TO4_IPV4ADDR. Also, log the dropped packets (with rate limit). Signed-off-by: Catalin(ux) M. BOIE <catab@embedromix.ro> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ming Lei authored
Commit 638c5115(USBNET: support DMA SG) introduces DMA SG if the usb host controller is capable of building packet from discontinuous buffers, but missed handling padding packet when building DMA SG. This patch attachs the pre-allocated padding packet at the end of the sg list, so padding packet can be sent to device if drivers require that. Reported-by: David Laight <David.Laight@aculab.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Sep, 2013 8 commits
-
-
Sucheta Chakraborty authored
o Commit 7e2cf4fe ("qlcnic: change driver hardware interface mechanism") has overwritten commit b43e5ee7 ("qlcnic: Register device in FAILED state") Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
VLAN priority is not being displayed for a VF currently when user executes "ip link show" command. This patch fixes it. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
Thix fix allows the VLAN priority to be configured for a VF interface via the "ip link set DEVICE vf NUM" path. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
Now the VF interfaces have privilege to add VLANs. Allow VLANs to be configured on these interfaces. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
In BE3-R, when UMC is enabled, the number of VLANs that can be added to the interface is reduced to 15. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
When the interface runs out of the allocated entries in VLAN table, we program the interface in VLAN promiscuous mode. Use OPCODE_COMMON_NTWK_RX_FILTER to set VLAN Promiscuous mode instead of OPCODE_COMMON_NTWK_VLAN_CONFIG. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
Size of be_nic_res_desc structure is incorrect. Fix it. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
Tx on SH-R can lockup if the packet size is less than 32 bytes. Pad such packets to a safer 36-byte size. Patch uses the Lancer-R workaround - which checks for packet <= 32-bytes Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-