Use the current logging styles.

Convert a few printks that should have been udf_warn and udf_err.
Coalesce formats.  Add #define pr_fmt.
Move an #include "udfdecls.h" above other includes in udftime.c
so pr_fmt works correctly.  Strip prefixes from conversions as appropriate.
Reorder logging definitions in udfdecl.h
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jan Kara <jack@suse.cz>

Rename udf_warning to udf_warn for consistency with normal logging
uses of pr_warn.

Rename function udf_warning to _udf_warn.
Remove __func__ from uses and move __func__ to a new udf_warn
macro that calls _udf_warn.
Add \n's to uses of udf_warn, remove \n from _udf_warn.
Coalesce formats.
Reviewed-by: NamJae Jeon <linkinjeon@gmail.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jan Kara <jack@suse.cz>

Rename udf_error to udf_err for consistency with normal logging
uses of pr_err.

Rename function udf_err to _udf_err.
Remove __func__ from uses and move __func__ to a new udf_err
macro that calls _udf_err.
Some of the udf_error uses had \n terminations, some did not so
standardize \n's to udf_err uses, remove \n from _udf_err function.
Coalesce udf_err formats.
One message prefixed with udf_read_super is now prefixed with
udf_fill_super.
Reviewed-by: NamJae Jeon <linkinjeon@gmail.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jan Kara <jack@suse.cz>

If there is a problem with a scratched disc or loader, it's valuable to know
which error occurred.

Convert some debug messages to udf_error, neaten those messages too.
Add the calculated tag checksum and the read checksum to error message.
Make udf_error a public function and move the logging prototypes together.
Original-patch-by: NamJae Jeon <linkinjeon@gmail.com>
Reviewed-by: NamJae Jeon <linkinjeon@gmail.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jan Kara <jack@suse.cz>

There are no user of EXT3_IOC32_WAIT_FOR_READONLY and also it is
broken. No one set the set_ro_timer, no one wake up us and our
state is set to TASK_INTERRUPTIBLE not RUNNING. So remove it.

Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>

Use mpage_readpages() instead of multiple calls to udf_readpage() to reduce the
CPU utilization and make performance higher.
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>

This quites the sparse noise:

warning: symbol 'ext3_trim_all_free' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>

Signed-off-by: Li Haifeng <omycle@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>

For a long time now orlov is the default block allocator in the ext3. It
performs better than the old one and no one seems to claim otherwise so
we can safely drop it and make oldalloc and orlov mount option
deprecated.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>

Delete nontrivial initialization that is immediately overwritten by the
result of an allocation function.

The semantic match that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
type T;
identifier i;
expression e;
@@

(
T i = \(0\|NULL\|ERR_PTR(...)\);
|
-T i = e;
+T i;
)
... when != i
i = \(kzalloc\|kcalloc\|kmalloc\)(...);

// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jan Kara <jack@suse.cz>

Delete nontrivial initialization that is immediately overwritten by the
result of an allocation function.

The semantic match that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
type T;
identifier i;
expression e;
@@

(
T i = \(0\|NULL\|ERR_PTR(...)\);
|
-T i = e;
+T i;
)
... when != i
i = \(kzalloc\|kcalloc\|kmalloc\)(...);

// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jan Kara <jack@suse.cz>

If there are some inodes in orphan list while a filesystem is being
read-only mounted, we should recommend that peole umount and then
mount it when they try to remount with read-write. But the current
message and comment recommend that they umount and then remount it
which may be slightly misleading.
Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Jan Kara <jack@suse.cz>

ext3_sync_file() does not need i_mutex for anything so just drop it.
Signed-off-by: Jan Kara <jack@suse.cz>

* 'kvm-updates/3.1' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: uses TASKSTATS, depends on NET
  KVM: fix TASK_DELAY_ACCT kconfig warning

* 'fixallnoconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] fix "allnoconfig" build

CONFIG_TASKSTATS just had a change to use netlink, including
a change to "depends on NET".  Since "select" does not follow
dependencies, KVM also needs to depend on NET to prevent build
errors when CONFIG_NET is not enabled.

Sample of the reported "undefined reference" build errors:

taskstats.c:(.text+0x8f686): undefined reference to `nla_put'
taskstats.c:(.text+0x8f721): undefined reference to `nla_reserve'
taskstats.c:(.text+0x8f8fb): undefined reference to `init_net'
taskstats.c:(.text+0x8f905): undefined reference to `netlink_unicast'
taskstats.c:(.text+0x8f934): undefined reference to `kfree_skb'
taskstats.c:(.text+0x8f9e9): undefined reference to `skb_clone'
taskstats.c:(.text+0x90060): undefined reference to `__alloc_skb'
taskstats.c:(.text+0x901e9): undefined reference to `skb_put'
taskstats.c:(.init.text+0x4665): undefined reference to `genl_register_family'
taskstats.c:(.init.text+0x4699): undefined reference to `genl_register_ops'
taskstats.c:(.init.text+0x4710): undefined reference to `genl_unregister_ops'
taskstats.c:(.init.text+0x471c): undefined reference to `genl_unregister_family'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Fix build errors (found when CONFIG_SYSFS is not enabled):

  drivers/xen/xen-selfballoon.c:446: warning: data definition has no type or storage class
  drivers/xen/xen-selfballoon.c:446: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL'
  drivers/xen/xen-selfballoon.c:446: warning: parameter names (without types) in function declaration
  drivers/xen/xen-selfballoon.c:485: error: expected declaration specifiers or '...' before string constant
  drivers/xen/xen-selfballoon.c:485: warning: data definition has no type or storage class
  drivers/xen/xen-selfballoon.c:485: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE'
  drivers/xen/xen-selfballoon.c:485: warning: function declaration isn't a prototype
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Kirill Shutemov found problems with the non-upstream IMG driver where the
use of extra DRM encoder/connector types caused random crashes when the DRM
layer tried to display their matching name. This removes the MIPI types
matching the changes Pauli Nieminen made to the non upstream driver set.

As Pauli points out:
" MIPI (or DSI) is protocol specification on top of LVDS serial bus. That
 makes it resonable to call MIPI connectors and encoders LVDS."

(and indeed they may also be HDMI convertors or similar when we want to
 report a more useful to end user result)
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit b33f9cbd ("regmap: Specify a module license") added a
MODULES_LICENSE to this file without adding an include of module.h.

module.h should have been included anyway, since this file has
EXPORT_SYMBOLs as well.  With the pending module.h split up, this would
probably have caused build problems.

Cc: Stephen Warren <swarren@nvidia.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'docs-move' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs:
  Docs: MSI-HOWTO: MSI -> MSIs
  Docs: MSI-HOWTO: Insert a comma
  Docs: MSI-HOWTO: can -> could
  Docs: MSI-HOWTO: Use `unknown ...' rather than `... know about.'
  Docs: MSI-HOWTO: may -> might
  Docs: MSI-HOWTO: Insert a comma
  Docs: MSI-HOWTO: API -> function
  Docs: MSI-HOWTO: , -> ;
  Docs: MSI-HOWTO: Move a sentence to another paragraph
  Docs: MSI-HOWTO: Insert `that'
  Docs: MSI-HOWTO: Offset modifier with a comma, and insert `yet' for emphasis
  Docs: MSI-HOWTO: Put the `because' subordinate clause first
  Docs: MSI-HOWTO: Streamline some wording
  Docs: MSI-HOWTO: `asked for' -> `requested'
  Docs: MSI-HOWTO: Use present tense and streamline some wording
  Docs: MSI-HOWTO: Use the subjunctive, and change `can' to `may'

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Set HAVE_C_RECORDMCOUNT
  sparc32: unbreak arch_write_unlock()
  sparc64: remove unnecessary macros from spinlock_64.h

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6:
  drm/i915: Cannot set clock gating under UMS
  drm/i915: Can't do accurate vblank timestamps with UMS
  Not all systems expose a firmware or platform mechanism for changing the backlight intensity on i915, so add native driver support.
  drm/i915: split out PCH refclk update code
  drm/i915: show interrupt info on IVB
  drm/i915: Remove unused 'reg' argument to dp_pipe_enabled
  drm/i915: Fix PCH port pipe select in CPT disable paths
  drm/i915: Leave LVDS registers unlocked
  drm/i915: Wait for LVDS panel power sequence

arch/x86/mm/fault.c needs to include asm/vsyscall.h to fix a
build error:

  arch/x86/mm/fault.c: In function '__bad_area_nosemaphore':
  arch/x86/mm/fault.c:728: error: 'VSYSCALL_START' undeclared (first use in this function)
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: David S. Miller <davem@davemloft.net>

The sparc32 version of arch_write_unlock() is just a plain assignment.
Unfortunately this allows the compiler to schedule side-effects in a
protected region to occur after the HW-level unlock, which is broken.
E.g., the following trivial test case gets miscompiled:

	#include <linux/spinlock.h>
	rwlock_t lock;
	int counter;
	void foo(void) { write_lock(&lock); ++counter; write_unlock(&lock); }

Fixed by adding a compiler memory barrier to arch_write_unlock().  The
sparc64 version combines the barrier and assignment into a single asm(),
and implements the operation as a static inline, so that's what I did too.

Compile-tested with sparc32_defconfig + CONFIG_SMP=y.
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

The sparc64 spinlock_64.h contains a number of operations defined
first as static inline functions, and then as macros with the same
names and parameters as the functions.  Maybe this was needed at
some point in the past, but now nothing seems to depend on these
macros (checked with a recursive grep looking for ifdefs on these
names).  Other archs don't define these identity-macros.

So this patch deletes these unnecessary macros.

Compile-tested with sparc64_defconfig.
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

The clock gating functions are only assigned under KMS, so don't try
to call them under UMS.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Justin P. Mattock <justinmattock@gmail.com>

Disable this feature when KMS is not running by setting the
driver->get_vblank_timestamp function pointer to NULL.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Justin P. Mattock <justinmattock@gmail.com>

Not all systems expose a firmware or platform mechanism for changing the backlight intensity on i915, so add native driver support.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Sedat Dilek <sedat.dilek@googlemail.com>
Tested-by: Michel Alexandre Salim <salimma@fedoraproject.org>
Tested-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Keith Packard <keithp@keithp.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: allow booting guest with CONFIG_RELOCATABLE=y
  virtio: Add text copy of spec to Documentation/virtual.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: ohci: fix DMA unmapping in an error path
  firewire: cdev: fix 32 bit userland on 64 bit kernel compat corner cases

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  jfs: flush journal completely before releasing metadata inodes

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: don't try to be smart in the hpd handler
  drm/radeon: re-POST the asic on Apple hardware when booted via EFI
  drm/radeon: Allow panel preferred EDID to override BIOS native mode
  drm/radeon/kms: make some watermark messages debug only
  drm/radeon/kms: fix regression is handling >2 heads on cedar/caicos
  drm/radeon/kms: don't enable connectors that are off in the hotplug handler

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: Do not set cifs/ntfs acl using a file handle (try #4)
  [CIFS] Cleanup use of CONFIG_CIFS_STATS2 ifdef to make transport routines more readable

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Specify a module license
  regmap: Fix bulk reads

Attempting to try and turn off disconnected display hw in the
hotput handler lead to more problems than it helped.  For
now just register an event and only attempt the do something
interesting with DP.  Other connectors are just too problematic:
- Some systems have an HPD pin assigned to LVDS, but it's rarely
if ever connected properly and we don't really care about hpd
events on LVDS anyway since it's always connected.
- The HPD pin is wired up correctly for eDP, but we don't really
have to do anything since the events since it's always connected.
- Some HPD pins fire more than once when you connect/disconnect
- etc.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=39882Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

The CONFIG_RELOCATABLE code tries to align the unpack destination to
the value of 'kernel_alignment' in the setup_hdr.  If that's 0, it
tries to unpack to address 0, which in fact causes the gunzip code
to call 'error("Out of memory while allocating output buffer")'.

The bootloader (ie. the lguest Launcher in this case) should be doing
setting this field; the normal bzImage is 16M, we can use the same.
Reported-by: Stefanos Geraggelos <sgerag@cslab.ece.ntua.gr>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org

As suggested by Christoph Hellwig.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Commit db64fe02 ("mm: rewrite vmap layer") introduced code that does
address calculations under the assumption that VMAP_BLOCK_SIZE is a
power of two.  However, this might not be true if CONFIG_NR_CPUS is not
set to a power of two.

Wrong vmap_block index/offset values could lead to memory corruption.
However, this has never been observed in practice (or never been
diagnosed correctly); what caught this was the BUG_ON in vb_alloc() that
checks for inconsistent vmap_block indices.

To fix this, ensure that VMAP_BLOCK_SIZE always is a power of two.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=31572Reported-by: Pavel Kysilka <goldenfish@linuxsoft.cz>
Reported-by: Matias A. Fonzo <selk@dragora.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: 2.6.28+ <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>