Mako-based machines (PA8800 and PA8900 CPUs) don't allow aliasing on
non-equaivalent addresses.
Signed-off-by: Helge Deller <deller@gmx.de>

Signed-off-by: Helge Deller <deller@gmx.de>

There are no callers of pcibios_init_bus(), so remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Helge Deller <deller@gmx.de>

When using the Promise TX2+ SATA controller on PA-RISC, the system often
crashes with kernel panic, for example just writing data with the dd
utility will make it crash.

Kernel panic - not syncing: drivers/parisc/sba_iommu.c: I/O MMU @ 000000000000a000 is out of mapping resources

CPU: 0 PID: 18442 Comm: mkspadfs Not tainted 4.4.0-rc2 #2
Backtrace:
 [<000000004021497c>] show_stack+0x14/0x20
 [<0000000040410bf0>] dump_stack+0x88/0x100
 [<000000004023978c>] panic+0x124/0x360
 [<0000000040452c18>] sba_alloc_range+0x698/0x6a0
 [<0000000040453150>] sba_map_sg+0x260/0x5b8
 [<000000000c18dbb4>] ata_qc_issue+0x264/0x4a8 [libata]
 [<000000000c19535c>] ata_scsi_translate+0xe4/0x220 [libata]
 [<000000000c19a93c>] ata_scsi_queuecmd+0xbc/0x320 [libata]
 [<0000000040499bbc>] scsi_dispatch_cmd+0xfc/0x130
 [<000000004049da34>] scsi_request_fn+0x6e4/0x970
 [<00000000403e95a8>] __blk_run_queue+0x40/0x60
 [<00000000403e9d8c>] blk_run_queue+0x3c/0x68
 [<000000004049a534>] scsi_run_queue+0x2a4/0x360
 [<000000004049be68>] scsi_end_request+0x1a8/0x238
 [<000000004049de84>] scsi_io_completion+0xfc/0x688
 [<0000000040493c74>] scsi_finish_command+0x17c/0x1d0

The cause of the crash is not exhaustion of the IOMMU space, there is
plenty of free pages. The function sba_alloc_range is called with size
0x11000, thus the pages_needed variable is 0x11. The function
sba_search_bitmap is called with bits_wanted 0x11 and boundary size is
0x10 (because dma_get_seg_boundary(dev) returns 0xffff).

The function sba_search_bitmap attempts to allocate 17 pages that must not
cross 16-page boundary - it can't satisfy this requirement
(iommu_is_span_boundary always returns true) and fails even if there are
many free entries in the IOMMU space.

How did it happen that we try to allocate 17 pages that don't cross
16-page boundary? The cause is in the function iommu_coalesce_chunks. This
function tries to coalesce adjacent entries in the scatterlist. The
function does several checks if it may coalesce one entry with the next,
one of those checks is this:

	if (startsg->length + dma_len > max_seg_size)
		break;

When it finishes coalescing adjacent entries, it allocates the mapping:

sg_dma_len(contig_sg) = dma_len;
dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE);
sg_dma_address(contig_sg) =
	PIDE_FLAG
	| (iommu_alloc_range(ioc, dev, dma_len) << IOVP_SHIFT)
	| dma_offset;

It is possible that (startsg->length + dma_len > max_seg_size) is false
(we are just near the 0x10000 max_seg_size boundary), so the funcion
decides to coalesce this entry with the next entry. When the coalescing
succeeds, the function performs
	dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE);
And now, because of non-zero dma_offset, dma_len is greater than 0x10000.
iommu_alloc_range (a pointer to sba_alloc_range) is called and it attempts
to allocate 17 pages for a device that must not cross 16-page boundary.

To fix the bug, we must make sure that dma_len after addition of
dma_offset and alignment doesn't cross the segment boundary. I.e. change
	if (startsg->length + dma_len > max_seg_size)
		break;
to
	if (ALIGN(dma_len + dma_offset + startsg->length, IOVP_SIZE) > max_seg_size)
		break;

This patch makes this change (it precalculates max_seg_boundary at the
beginning of the function iommu_coalesce_chunks). I also added a check
that the mapping length doesn't exceed dma_get_seg_boundary(dev) (it is
not needed for Promise TX2+ SATA, but it may be needed for other devices
that have dma_get_seg_boundary lower than dma_get_max_seg_size).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>

Pull device mapper fixes from Mike Snitzer:
 "Five stable fixes:

   - Two DM btree bufio buffer leak fixes that resolve reported BUG_ONs
     during DM thinp metadata close's dm_bufio_client_destroy().

   - A DM thinp range discard fix to handle discarding a partially
     mapped range.

   - A DM thinp metadata snapshot fix to make sure the btree roots saved
     in the metadata snapshot are the most current.

   - A DM space map metadata refcounting fix that improves both DM thinp
     and DM cache metadata"

* tag 'dm-4.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm btree: fix bufio buffer leaks in dm_btree_del() error path
  dm space map metadata: fix ref counting bug when bootstrapping a new space map
  dm thin metadata: fix bug when taking a metadata snapshot
  dm thin metadata: fix bug in dm_thin_remove_range()
  dm btree: fix leak of bufio-backed block in btree_split_sibling error path

Pull fuse fixes from Miklos Szeredi:
 "Two bugfixes, both bound for -stable"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: break infinite loop in fuse_fill_write_pages()
  cuse: fix memory leak

Pull drm fixes from Dave Airlie:
 "Not too much this time.

   - One nouveau workaround extended to a few more GPUs
   - Some amdgpu big endian fixes, and a regression fixer
   - Some vmwgfx fixes
   - One ttm locking fix
   - One vgaarb fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  vgaarb: fix signal handling in vga_get()
  radeon: Fix VCE IB test on Big-Endian systems
  radeon: Fix VCE ring test for Big-Endian systems
  radeon/cik: Fix GFX IB test on Big-Endian
  drm/amdgpu: fix the lost duplicates checking
  drm/nouveau/pmu: remove whitelist for PGOB-exit WAR, enable by default
  drm/vmwgfx: Implement the cursor_set2 callback v2
  drm/vmwgfx: fix a warning message
  drm/ttm: Fixed a read/write lock imbalance

There are few defects in vga_get() related to signal hadning:

  - we shouldn't check for pending signals for TASK_UNINTERRUPTIBLE
    case;

  - if we found pending signal we must remove ourself from wait queue
    and change task state back to running;

  - -ERESTARTSYS is more appropriate, I guess.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: stable@vger.kernel.org
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

some big endian fixes and one regression fix.

* 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux:
  radeon: Fix VCE IB test on Big-Endian systems
  radeon: Fix VCE ring test for Big-Endian systems
  radeon/cik: Fix GFX IB test on Big-Endian
  drm/amdgpu: fix the lost duplicates checking

Pull rdma fixes from Doug Ledford:
 "Most are minor to important fixes.

  There is one performance enhancement that I took on the grounds that
  failing to check if other processes can run before running what's
  intended to be a background, idle-time task is a bug, even though the
  primary effect of the fix is to improve performance (and it was a very
  simple patch)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/mlx5: Postpone remove_keys under knowledge of coming preemption
  IB/mlx4: Use vmalloc for WR buffers when needed
  IB/mlx4: Use correct order of variables in log message
  iser-target: Remove explicit mlx4 work-around
  mlx4: Expose correct max_sge_rd limit
  IB/mad: Require CM send method for everything except ClassPortInfo
  IB/cma: Add a missing rcu_read_unlock()
  IB core: Fix ib_sg_to_pages()
  IB/srp: Fix srp_map_sg_fr()
  IB/srp: Fix indirect data buffer rkey endianness
  IB/srp: Initialize dma_length in srp_map_idb
  IB/srp: Fix possible send queue overflow
  IB/srp: Fix a memory leak
  IB/sa: Put netlink request into the request list before sending
  IB/iser: use sector_div instead of do_div
  IB/core: use RCU for uverbs id lookup
  IB/qib: Minor fixes to qib per SFF 8636
  IB/core: Fix user mode post wr corruption
  IB/qib: Fix qib_mr structure

Pull sound fixes from Takashi Iwai:
 "Again less intensive changes in this rc: you can find only a few
  HD-audio fixes (noise fixes for Intel Broxton chip and a few Thinkpad
  models, quirks for Alienware 17 and Packard Bell DOTS) in addition to
  a long-standing rme96 bug fix"

* tag 'sound-4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/ca0132 - quirk for Alienware 17 2015
  ALSA: hda - Fix noise problems on Thinkpad T440s
  ALSA: hda - Fixing speaker noise on the two latest thinkpad models
  ALSA: hda - Add inverted dmic for Packard Bell DOTS
  ALSA: hda - Fix playback noise with 24/32 bit sample size on BXT
  ALSA: rme96: Fix unexpected volume reset after rate changes

If dm_btree_del()'s call to push_frame() fails, e.g. due to
btree_node_validator finding invalid metadata, the dm_btree_del() error
path must unlock all frames (which have active dm-bufio buffers) that
were pushed onto the del_stack.

Otherwise, dm_bufio_client_destroy() will BUG_ON() because dm-bufio
buffers have leaked, e.g.:
  device-mapper: bufio: leaked buffer 3, hold count 1, list 0
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org

Pull VFIO fixes from Alex Williamson:

 - Various fixes for removing redundancy, const'ifying structs, avoiding
   stack usage, fixing WARN usage (Krzysztof Kozlowski, Julia Lawall,
   Kees Cook, Dan Carpenter)

 - Revert No-IOMMU mode as the intended user has not emerged (Alex
   Williamson)

* tag 'vfio-v4.4-rc5' of git://github.com/awilliam/linux-vfio:
  Revert: "vfio: Include No-IOMMU mode"
  vfio: fix a warning message
  vfio: platform: remove needless stack usage
  vfio-pci: constify pci_error_handlers structures
  vfio: Drop owner assignment from platform_driver

Merge tag 'devicetree-fixes-for-4.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DT fixes from Rob Herring:
 "I think this should be all for 4.4:

   - Fix incorrect warning about overlapping memory regions

   - Export of_irq_find_parent again which was made static in 4.4, but
     has users pending for 4.5.

   - Fix of_msi_map_rid declaration location

   - Fix re-entrancy for of_fdt_unflatten_tree

   - Clean-up of phys_addr_t printks"

* tag 'devicetree-fixes-for-4.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of/irq: move of_msi_map_rid declaration to the correct ifdef section
  of/irq: Export of_irq_find_parent again
  of/fdt: Add mutex protection for calls to __unflatten_device_tree()
  of/address: fix typo in comment block of of_translate_one()
  of: do not use 0x in front of %pa
  of: Fix comparison of reserved memory regions

Pull clk fixes from Stephen Boyd:
 "One small build fix, a couple do_div() fixes, and a fix for the gpio
  basic clock type are the major changes here.  There's also a couple
  fixes for the TI, sunxi, and scpi clock drivers"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sunxi: pll2: Fix clock running too fast
  clk: scpi: add missing of_node_put
  clk: qoriq: fix memory leak
  imx/clk-pllv2: fix wrong do_div() usage
  imx/clk-pllv1: fix wrong do_div() usage
  clk: mmp: add linux/clk.h includes
  clk: ti: drop locking code from mux/divider drivers
  clk: ti816x: Add missing dmtimer clkdev entries
  clk: ti: fapll: fix wrong do_div() usage
  clk: ti: clkt_dpll: fix wrong do_div() usage
  clk: gpio: Get parent clk names in of_gpio_clk_setup()

Pull IPMI fix from Corey Minyard:
 "Fix an Oops if an interrupt occurs at startup.  This can happen on
  some hardware"

* tag 'for-linus-4.4-1' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi: move timer init to before irq is setup

We encountered a panic on boot in ipmi_si on a dell per320 due to an
uninitialized timer as follows.

static int smi_start_processing(void       *send_info,
                                ipmi_smi_t intf)
{
        /* Try to claim any interrupts. */
        if (new_smi->irq_setup)
                new_smi->irq_setup(new_smi);

 --> IRQ arrives here and irq handler tries to modify uninitialized timer

    which triggers BUG_ON(!timer->function) in __mod_timer().

 Call Trace:
   <IRQ>
   [<ffffffffa0532617>] start_new_msg+0x47/0x80 [ipmi_si]
   [<ffffffffa053269e>] start_check_enables+0x4e/0x60 [ipmi_si]
   [<ffffffffa0532bd8>] smi_event_handler+0x1e8/0x640 [ipmi_si]
   [<ffffffff810f5584>] ? __rcu_process_callbacks+0x54/0x350
   [<ffffffffa053327c>] si_irq_handler+0x3c/0x60 [ipmi_si]
   [<ffffffff810efaf0>] handle_IRQ_event+0x60/0x170
   [<ffffffff810f245e>] handle_edge_irq+0xde/0x180
   [<ffffffff8100fc59>] handle_irq+0x49/0xa0
   [<ffffffff8154643c>] do_IRQ+0x6c/0xf0
   [<ffffffff8100ba53>] ret_from_intr+0x0/0x11

        /* Set up the timer that drives the interface. */
        setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi);

The following patch fixes the problem.

To: Openipmi-developer@lists.sourceforge.net
To: Corey Minyard <minyard@acm.org>
CC: linux-kernel@vger.kernel.org
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # Applies cleanly to 3.10-, needs small rework before

ROL on a 32 bit integer with a shift of 32 or more is undefined and the
result is arch-dependent. Avoid this by handling the trivial case of
roling by 0 correctly.

The trivial solution of checking if shift is 0 breaks gcc's detection
of this code as a ROL instruction, which is unacceptable.

This bug was reported and fixed in GCC
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=57157):

	The standard rotate idiom,

	  (x << n) | (x >> (32 - n))

	is recognized by gcc (for concreteness, I discuss only the case that x
	is an uint32_t here).

	However, this is portable C only for n in the range 0 < n < 32. For n
	== 0, we get x >> 32 which gives undefined behaviour according to the
	C standard (6.5.7, Bitwise shift operators). To portably support n ==
	0, one has to write the rotate as something like

	  (x << n) | (x >> ((-n) & 31))

	And this is apparently not recognized by gcc.

Note that this is broken on older GCCs and will result in slower ROL.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When applying block operations (BOPs) do not remove them from the
uncommitted BOP ring-buffer until after they've been applied -- in case
we recurse.

Also, perform BOP_INC operation, in dm_sm_metadata_create() and
sm_metadata_extend(), in terms of the uncommitted BOP ring-buffer rather
than using direct calls to sm_ll_inc().
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org

When you take a metadata snapshot the btree roots for the mapping and
details tree need to have their reference counts incremented so they
persist for the lifetime of the metadata snap.

The roots being incremented were those currently written in the
superblock, which could possibly be out of date if concurrent IO is
triggering new mappings, breaking of sharing, etc.

Fix this by performing a commit with the metadata lock held while taking
a metadata snapshot.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org

Pull vfs fixes from Al Viro:
 "A couple of fixes, both -stable fodder (9p one all way back to 2.6.32,
  dio - to all branches where "Fix negative return from dio read beyond
  eof" will end up it; it's a fixup to commit marked for -stable)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix the regression from "direct-io: Fix negative return from dio read beyond eof"
  9p: ->evict_inode() should kick out ->i_data, not ->i_mapping

Pull PCI fixes from Bjorn Helgaas:
 "These are more fixes I'd like to have in v4.4.  Several for the Altera
  driver added for v4.4, and one for an MSI domain problem that affects
  several arm64 platforms:

  MSI:
   - Only use the generic MSI layer when domain is hierarchical (Marc
     Zyngier)

  Altera host bridge driver:
   - Fix loop in tlp_read_packet() (Dan Carpenter)
   - Fix Requester ID for config accesses (Ley Foon Tan)
   - Check TLP completion status (Ley Foon Tan)
   - Fix error when INTx is 4 (Ley Foon Tan)"

* tag 'pci-v4.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: altera: Fix error when INTx is 4
  PCI: altera: Check TLP completion status
  PCI: altera: Fix Requester ID for config accesses
  PCI: altera: Fix loop in tlp_read_packet()
  PCI/MSI: Only use the generic MSI layer when domain is hierarchical

The Alienware 17 (2015) has the same card and pin configuration of the
Alienware 15, so the same quirks must be applied.
Signed-off-by: Gabriele Martino <g.martino@gmx.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In checking fixes for of_irq_find_parent declaration location, I found
that of_msi_map_rid is also wrong. of_msi_map_rid is not implemented for
Sparc, so it should not be in the Sparc specific section of the header.
Move it to just depend on OF_IRQ.

Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

of_irq_find_parent was made static since it had no users outside of
of_irq.c. Export it again since we are going to use it again.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
[robh: move of_irq_find_parent to correct ifdef section]
Signed-off-by: Rob Herring <robh@kernel.org>

Lenovo Thinkpad T440s suffers from constant background noises, and it
seems to be a generic hardware issue on this model:
  https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/T440s-speaker-noise/td-p/1339883

As the noise comes from the analog loopback path, disabling the path
is the easy workaround.

Also, the machine gives significant cracking noises at PM suspend.  A
workaround found by trial-and-error is to disable the shutup callback
currently used for ALC269-variant.

This patch addresses these noise issues by introducing a new fixup
chain.  Although the same workaround might be applicable to other
Thinkpad models, it's applied only to T440s (17aa:220c) in this patch,
so far, just to be safe (you chicken!).  As a compromise, a new model
option string "tp440" is provided now, though, so that owners of other
Thinkpad models can test it more easily.

Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=958504Reported-and-tested-by: Tim Hardeck <thardeck@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch makes the VCE IB test pass on Big-Endian systems. It converts
to little-endian the contents of the VCE message.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch fixes the VCE ring test when running on Big-Endian machines.
Every write to the ring needs to be translated to little-endian.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch makes the IB test on the GFX ring pass for CI-based cards
installed in Big-Endian machines.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Cc: stable@vger.kernel.org

Pull request of 2015-12-08

A couple of fixes for vmwgfx. A WARN() fix by Dan Carpenter,
a TTM read/write lock imbalance causing occasional hangs with Wayland and
an implementation of cursor_set2 to fix incorrectly offset Wayland cursors.

* tag 'vmwgfx-fixes-4.4-151208' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Implement the cursor_set2 callback v2
  drm/vmwgfx: fix a warning message
  drm/ttm: Fixed a read/write lock imbalance

Just the one commit I mentioned earlier, making the PGOB workaround the
default.

* 'linux-4.4' of https://github.com/skeggsb/linux:
  drm/nouveau/pmu: remove whitelist for PGOB-exit WAR, enable by default

Pull uml fixes from Richard Weinberger:
 "This contains various bug fixes, most of them are fall out from the
  merge window"

* 'for-linus-4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: fix returns without va_end
  um: Fix fpstate handling
  arch: um: fix error when linking vmlinux.
  um: Fix get_signal() usage

NVIDIA have indicated that the workaround is required on all GK10[467]
boards that have the PGOB fuse set.

I've left the commandline option in place for now, as paranoia.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The remove_keys() logic is performed as garbage collection task. Such
task is intended to be run when no other active processes are running.

The need_resched() will return TRUE if there are user tasks to be
activated in near future.

In such case, we don't execute remove_keys() and postpone
the garbage collection work to try to run in next cycle,
in order to free CPU resources to other tasks.

The possible pseudo-code to trigger such scenario:
1. Allocate a lot of MR to fill the cache above the limit.
2. Wait a small amount of time "to calm" the system.
3. Start CPU extensive operations on multi-node cluster.
4. Expect performance degradation during MR cache shrink operation.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

There are several hits that WR buffer allocation(kmalloc) failed.
It failed at order 3 and/or 4 contigous pages allocation. At the same time
there are actually 100MB+ free memory but well fragmented.
So try vmalloc when kmalloc failed.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

There is a mis-order in mlx4 log. Fix it.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Pull cgroup fixes from Tejun Heo:
 "More change than I'd have liked at this stage.  The pids controller
  and the changes made to cgroup core to support it introduced and
  revealed several important issues.

   - Assigning membership to a newly created task and migrating it can
     race leading to incorrect accounting.  Oleg fixed it by widening
     threadgroup synchronization.  It looks like we'll be able to merge
     it with a different percpu rwsem which is used in fork path making
     things simpler and cheaper.

   - The recent change to extend cgroup membership to zombies (so that
     pid accounting can extend till the pid is actually released) missed
     pinning the underlying data structures leading to use-after-free.
     Fixed.

   - v2 hierarchy was calling subsystem callbacks with the wrong target
     cgroup_subsys_state based on the incorrect assumption that they
     share the same target.  pids is the first controller affected by
     this.  Subsys callbacks updated so that they can deal with
     multi-target migrations"

* 'for-4.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup_pids: don't account for the root cgroup
  cgroup: fix handling of multi-destination migration from subtree_control enabling
  cgroup_freezer: simplify propagation of CGROUP_FROZEN clearing in freezer_attach()
  cgroup: pids: kill pids_fork(), simplify pids_can_fork() and pids_cancel_fork()
  cgroup: pids: fix race between cgroup_post_fork() and cgroup_migrate()
  cgroup: make css_set pin its css's to avoid use-afer-free
  cgroup: fix cftype->file_offset handling

Pull libata fixes from Tejun Heo:
 "Nothing too interesting.  All are device specific additions and
  workarounds"

* 'for-4.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata/sata_fsl.c: add ATA_FLAG_NO_LOG_PAGE to blacklist the controller for log page reads
  libata-eh.c: Introduce new ata port flag for controller which lockup on read log page
  sata_sil: disable trim
  AHCI: Fix softreset failed issue of Port Multiplier
  sata/mvebu: use #ifdef around suspend/resume code
  ahci: Order SATA device IDs for codename Lewisburg
  ahci: Add Device ID for Intel Sunrise Point PCH

When using va_list ensure that va_start will be followed by va_end.
Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>