There is no good reason to start out disabled - drivers can control if
the poll instance can be scheduled by simply not scheduling it yet.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>

The new name is irq_poll as iopoll is already taken.  Better suggestions
welcome.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>

Pull drm fixes from Dave Airlie:
 "A bunch of change across the board, the main things are some vblank
  fallout in radeon and nouveau required some work, but I think this
  should fix it all.  There is also one drm fix for an oops in vmwgfx
  with how we pass the drm master around.

  The rest is just some amdgpu, i915, imx and rockchip fixes.

  Probably more than I'd like at this point, but hopefully things settle
  down now"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (40 commits)
  drm/amdgpu: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v3)
  drm/radeon: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v2)
  drm/radeon: Retry DDC probing on DVI on failure if we got an HPD interrupt
  drm/amdgpu: add spin lock to protect freed list in vm (v2)
  drm/amdgpu: partially revert "drm/amdgpu: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR" v2
  drm/amdgpu: take a BO reference for the user fence
  drm/amdgpu: take a BO reference in the display code
  drm/amdgpu: set snooped flags only on system addresses v2
  drm/nouveau: Fix pre-nv50 pageflip events (v4)
  drm: Fix an unwanted master inheritance v2
  drm/amdgpu: fix race condition in amd_sched_entity_push_job
  drm/amdgpu: add err check for pin userptr
  drm/i915: take a power domain reference while checking the HDMI live status
  drm/i915: add MISSING_CASE to a few port/aux power domain helpers
  drm/i915/ddi: fix intel_display_port_aux_power_domain() after HDMI detect
  drm/i915: Introduce a gmbus power domain
  drm/i915: Clean up AUX power domain handling
  drm/rockchip: Use CRTC vblank event interface
  drm/rockchip: Fix module autoload for OF platform driver
  drm/rockchip: vop: fix window origin calculation
  ...

Pull crypto fixes from Herbert Xu:
 "This fixes a couple of crypto drivers that were using memcmp to verify
  authentication tags.  They now use crypto_memneq instead"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: talitos - Fix timing leak in ESP ICV verification
  crypto: nx - Fix timing leak in GCM and CCM decryption

A few more last minute fixes for 4.4 on top of my pull request from
earlier this week.  The big change here is a vblank regression fix due to
commit 4dfd6486 "drm: Use vblank timestamps to guesstimate how many vblanks
were missed".  Beyond that, a hotplug fix and a few VM fixes.

* 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v3)
  drm/radeon: Fixup hw vblank counter/ts for new drm_update_vblank_count() (v2)
  drm/radeon: Retry DDC probing on DVI on failure if we got an HPD interrupt
  drm/amdgpu: add spin lock to protect freed list in vm (v2)
  drm/amdgpu: partially revert "drm/amdgpu: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR" v2
  drm/amdgpu: take a BO reference for the user fence
  drm/amdgpu: take a BO reference in the display code
  drm/amdgpu: set snooped flags only on system addresses v2
  drm/amdgpu: fix race condition in amd_sched_entity_push_job
  drm/amdgpu: add err check for pin userptr
  add blacklist for thinkpad T40p
  drm/amdgpu: fix VM page table reference counting
  drm/amdgpu: fix userptr flags check

Pull Ceph fix from Sage Weil:
 "This addresses a refcounting bug that leads to a use-after-free"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: don't put snap_context twice in rbd_queue_workfn()

commit 4dfd6486 "drm: Use vblank timestamps to guesstimate how many
vblanks were missed" introduced in Linux 4.4-rc1 makes the drm core
more fragile to drivers which don't update hw vblank counters and
vblank timestamps in sync with firing of the vblank irq and
essentially at leading edge of vblank.

This exposed a problem with radeon-kms/amdgpu-kms which do not
satisfy above requirements:

The vblank irq fires a few scanlines before start of vblank, but
programmed pageflips complete at start of vblank and
vblank timestamps update at start of vblank, whereas the
hw vblank counter increments only later, at start of vsync.

This leads to problems like off by one errors for vblank counter
updates, vblank counters apparently going backwards or vblank
timestamps apparently having time going backwards. The net result
is stuttering of graphics in games, or little hangs, as well as
total failure of timing sensitive applications.

See bug #93147 for an example of the regression on Linux 4.4-rc:

https://bugs.freedesktop.org/show_bug.cgi?id=93147

This patch tries to align all above events better from the
viewpoint of the drm core / of external callers to fix the problem:

1. The apparent start of vblank is shifted a few scanlines earlier,
so the vblank irq now always happens after start of this extended
vblank interval and thereby drm_update_vblank_count() always samples
the updated vblank count and timestamp of the new vblank interval.

To achieve this, the reporting of scanout positions by
radeon_get_crtc_scanoutpos() now operates as if the vblank starts
radeon_crtc->lb_vblank_lead_lines before the real start of the hw
vblank interval. This means that the vblank timestamps which are based
on these scanout positions will now update at this earlier start of
vblank.

2. The driver->get_vblank_counter() function will bump the returned
vblank count as read from the hw by +1 if the query happens after
the shifted earlier start of the vblank, but before the real hw increment
at start of vsync, so the counter appears to increment at start of vblank
in sync with the timestamp update.

3. Calls from vblank irq-context and regular non-irq calls are now
treated identical, always simulating the shifted vblank start, to
avoid inconsistent results for queries happening from vblank irq vs.
happening from drm_vblank_enable() or vblank_disable_fn().

4. The radeon_flip_work_func will delay mmio programming a pageflip until
the start of the real vblank iff it happens to execute inside the shifted
earlier start of the vblank, so pageflips now also appear to execute at
start of the shifted vblank, in sync with vblank counter and timestamp
updates. This to avoid some races between updates of vblank count and
timestamps that are used for swap scheduling and pageflip execution which
could cause pageflips to execute before the scheduled target vblank.

The lb_vblank_lead_lines "fudge" value is calculated as the size of
the display controllers line buffer in scanlines for the given video
mode: Vblank irq's are triggered by the line buffer logic when the line
buffer refill for a video frame ends, ie. when the line buffer source read
position enters the hw vblank. This means that a vblank irq could fire at
most as many scanlines before the current reported scanout position of the
crtc timing generator as the number of scanlines the line buffer can
maximally hold for a given video mode.

This patch has been successfully tested on a RV730 card with DCE-3 display
engine and on a evergreen card with DCE-4 display engine, in single-display
and dual-display configuration, with different video modes.

A similar patch is needed for amdgpu-kms to fix the same problem.

Limitations:

- Maybe replace the udelay() in the flip_work_func() by a suitable
  usleep_range() for a bit better efficiency? Will try that.

- Line buffer sizes in pixels are hard-coded on < DCE-4 to a value
  i just guessed to be high enough to work ok, lacking info on the true
  sizes atm.

Probably fixes: fdo#93147

Port of Mario's radeon fix to amdgpu.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(v1) Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>

(v2) Refine amdgpu_flip_work_func() for better efficiency.

     In amdgpu_flip_work_func, replace the busy waiting udelay(5)
     with event lock held by a more performance and energy efficient
     usleep_range() until at least predicted true start of hw vblank,
     with some slack for scheduler happiness. Release the event lock
     during waits to not delay other outputs in doing their stuff, as
     the waiting can last up to 200 usecs in some cases.

     Also small fix to code comment and formatting in that function.

(v2) Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>

(v3) Fix crash in crtc disabled case

Pull libnvdimm fixes from Dan Williams:

 - NFIT parsing regression fixes from Linda.  The nvdimm hot-add
   implementation merged in 4.4-rc1 interpreted the specification in a
   way that breaks actual HPE platforms.  We are also closing the loop
   with the ACPI Working Group to get this clarification added to the
   spec.

 - Andy pointed out that his laptop without nvdimm resources is loading
   the e820-nvdimm module by default, fix that up to only load the
   module when an e820-type-12 range is present.

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nfit: Adjust for different _FIT and NFIT headers
  nfit: Fix the check for a successful NFIT merge
  nfit: Account for table size length variation
  libnvdimm, e820: skip module loading when no type-12

Pull ARM KVM fixes from Paolo Bonzini:

 - a series of fixes to deal with the aliasing between the sp and xzr
   register

 - a fix for the cache flush fix that went in -rc3

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  ARM/arm64: KVM: correct PTE uncachedness check
  arm64: KVM: Get rid of old vcpu_reg()
  arm64: KVM: Correctly handle zero register in system register accesses
  arm64: KVM: Remove const from struct sys_reg_params
  arm64: KVM: Correctly handle zero register during MMIO

commit 4dfd6486 "drm: Use vblank timestamps to guesstimate how many
vblanks were missed" introduced in Linux 4.4-rc1 makes the drm core
more fragile to drivers which don't update hw vblank counters and
vblank timestamps in sync with firing of the vblank irq and
essentially at leading edge of vblank.

This exposed a problem with radeon-kms/amdgpu-kms which do not
satisfy above requirements:

The vblank irq fires a few scanlines before start of vblank, but
programmed pageflips complete at start of vblank and
vblank timestamps update at start of vblank, whereas the
hw vblank counter increments only later, at start of vsync.

This leads to problems like off by one errors for vblank counter
updates, vblank counters apparently going backwards or vblank
timestamps apparently having time going backwards. The net result
is stuttering of graphics in games, or little hangs, as well as
total failure of timing sensitive applications.

See bug #93147 for an example of the regression on Linux 4.4-rc:

https://bugs.freedesktop.org/show_bug.cgi?id=93147

This patch tries to align all above events better from the
viewpoint of the drm core / of external callers to fix the problem:

1. The apparent start of vblank is shifted a few scanlines earlier,
so the vblank irq now always happens after start of this extended
vblank interval and thereby drm_update_vblank_count() always samples
the updated vblank count and timestamp of the new vblank interval.

To achieve this, the reporting of scanout positions by
radeon_get_crtc_scanoutpos() now operates as if the vblank starts
radeon_crtc->lb_vblank_lead_lines before the real start of the hw
vblank interval. This means that the vblank timestamps which are based
on these scanout positions will now update at this earlier start of
vblank.

2. The driver->get_vblank_counter() function will bump the returned
vblank count as read from the hw by +1 if the query happens after
the shifted earlier start of the vblank, but before the real hw increment
at start of vsync, so the counter appears to increment at start of vblank
in sync with the timestamp update.

3. Calls from vblank irq-context and regular non-irq calls are now
treated identical, always simulating the shifted vblank start, to
avoid inconsistent results for queries happening from vblank irq vs.
happening from drm_vblank_enable() or vblank_disable_fn().

4. The radeon_flip_work_func will delay mmio programming a pageflip until
the start of the real vblank iff it happens to execute inside the shifted
earlier start of the vblank, so pageflips now also appear to execute at
start of the shifted vblank, in sync with vblank counter and timestamp
updates. This to avoid some races between updates of vblank count and
timestamps that are used for swap scheduling and pageflip execution which
could cause pageflips to execute before the scheduled target vblank.

The lb_vblank_lead_lines "fudge" value is calculated as the size of
the display controllers line buffer in scanlines for the given video
mode: Vblank irq's are triggered by the line buffer logic when the line
buffer refill for a video frame ends, ie. when the line buffer source read
position enters the hw vblank. This means that a vblank irq could fire at
most as many scanlines before the current reported scanout position of the
crtc timing generator as the number of scanlines the line buffer can
maximally hold for a given video mode.

This patch has been successfully tested on a RV730 card with DCE-3 display
engine and on a evergreen card with DCE-4 display engine, in single-display
and dual-display configuration, with different video modes.

A similar patch is needed for amdgpu-kms to fix the same problem.

Limitations:

- Line buffer sizes in pixels are hard-coded on < DCE-4 to a value
  i just guessed to be high enough to work ok, lacking info on the true
  sizes atm.

Fixes: fdo#93147
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>

(v1) Tested-by: Dave Witbrodt <dawitbro@sbcglobal.net>

(v2) Refine radeon_flip_work_func() for better efficiency:

     In radeon_flip_work_func, replace the busy waiting udelay(5)
     with event lock held by a more performance and energy efficient
     usleep_range() until at least predicted true start of hw vblank,
     with some slack for scheduler happiness. Release the event lock
     during waits to not delay other outputs in doing their stuff, as
     the waiting can last up to 200 usecs in some cases.

     Retested on DCE-3 and DCE-4 to verify it still works nicely.

(v2) Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

HPD signals on DVI ports can be fired off before the pins required for
DDC probing actually make contact, due to the pins for HPD making
contact first. This results in a HPD signal being asserted but DDC
probing failing, resulting in hotplugging occasionally failing.

This is somewhat rare on most cards (depending on what angle you plug
the DVI connector in), but on some cards it happens constantly. The
Radeon R5 on the machine used for testing this patch for instance, runs
into this issue just about every time I try to hotplug a DVI monitor and
as a result hotplugging almost never works.

Rescheduling the hotplug work for a second when we run into an HPD
signal with a failing DDC probe usually gives enough time for the rest
of the connector's pins to make contact, and fixes this issue.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

there is a protection fault about freed list when OCL test.
add a spin lock to protect it.

v2: drop changes in vm_fini
Signed-off-by: JimQu <jim.qu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

The gtt_end is already inclusive, we don't need to subtract one here.

v2 (chk): keep the fix for the VM code, cause here it really applies.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Anatoli Antonovitch <anatoli.antonovitch@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

No need for a GEM reference here.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

No need for the GEM reference here.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'kvm-arm-for-v4.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master

KVM/ARM fixes for v4.4-rc4

- A series of fixes to deal with the aliasing between the sp and xzr register
- A fix for the cache flush fix that went in -rc3

Not necessary for VRAM.

v2: no need to check if ttm is NULL.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull sound fixes from Takashi Iwai:
 "This time we've got a larger number of updates, mainly from ASoC
  world.  The only significant LOCs found here are for Realtek codecs,
  where most of changes are quite systematic replacements.

  There are also a few fixes in ASoC core side: one is the PM call order
  fix to ensure the DPAM resume working properly.  Another is the proper
  cleanup call after freeing DAPM widgets, and the correction of the
  wrong callback set in topology API.

  The rest are a wide range of driver-specific small fixes, including
  HD-audio"

* tag 'sound-4.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
  ALSA: hda - Add Conexant CX8200 (14f1:2008) codec entry
  ALSA: hda - Correct codec names for 14f1:50f1 and 14f1:50f3
  ALSA: hda - Skip ELD notification during system suspend
  ASoC: core: Change power state before rechecking endpoint
  ASoC: fix kernel-doc warnings in sound/soc/soc-ops.c
  ASoC: rt5645: Add dmi_system_id "Google Terra"
  ASoC: rockchip: Fix incorrect VDW value for 24 bit
  ASoC: fsl: clarify ac97 dependency
  ASoC: Intel: Skylake: fix memory leak
  ASoC: davinci-mcasp: Fix master capture only mode
  ASoC: es8328: Fix shifts for mixer switches
  ASoC: rt5645: Add dmi_system_id "Google Wizpig"
  ASoC: sti: set player private data
  ASoC: sti: rename ST proprietary DT properties
  ASoC: sti: remove wrong error message
  ASoC: Intel: Skylake: Add I2C depends for SKL machine
  ASoC: topology: fix info callback for TLV byte control
  ASoC: rt5670: fix wrong bit def for pll src
  ASoC: nau8825: add pm function
  ASoC: rt5645: Add struct dmi_system_id "Google Edgar" for Chrome OS
  ...

Pull power management and ACPI fixes from Rafael Wysocki:
 "These fix a recent regression in the ACPI PCI host bridge
  initialization code, clean up some recent changes (generic power
  domains framework, ACPI AML debugger support), fix three older but
  annoying bugs (PCI power management.  generic power domains framework,
  cpufreq) and a build problem (device properties framework), and update
  a stale MAINTAINERS entry (ACPI backlight driver).

  Specifics:

   - Fix a regression in the ACPI PCI host bridge initialization code
     introduced by the recent consolidation of the host bridge handling
     on x86 and ia64 that forgot to take one special piece of code
     related to NUMA on x86 into account (Liu Jiang).

   - Improve the Kconfig help description of the new ACPI AML debugger
     support option to avoid possible confusion (Peter Zijlstra).

   - Remove a piece of code in the generic power domains framework that
     should have been removed by one of the recent commits modifying
     that code (Ulf Hansson).

   - Reduce the log level of a PCI PM message that generates a lot of
     false-positive log noise for some drivers and improve the message
     itself while at it (Imre Deak).

   - Fix the OF-based domain lookup code in the generic power domains
     framework to make it drop references to DT nodes correctly (Eric
     Anholt).

   - Prevent the cpufreq core from setting the policy back to the
     default after a CPU offline/online cycle for cpufreq drivers
     providing the ->setpolicy callback (Srinivas Pandruvada).

   - Fix a build problem for CONFIG_ACPI unset in the device properties
     framework (Hanjun Guo).

   - Fix a stale file path in the ACPI backlight driver entry in
     MAINTAINERS (Dan Carpenter)"

* tag 'pm+acpi-4.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / Domains: Fix bad of_node_put() in failure paths of genpd_dev_pm_attach()
  cpufreq: use last policy after online for drivers with ->setpolicy
  PCI / PM: Tune down retryable runtime suspend error messages
  PM / Domains: Validate cases of a non-bound driver in genpd governor
  MAINTAINERS: ACPI / video: update a file name in drivers/acpi/
  ACPI / property: fix compile error for acpi_node_get_property_reference() when CONFIG_ACPI=n
  x86/PCI/ACPI: Fix regression caused by commit 4d6b4e69
  ACPI: Better describe ACPI_DEBUGGER

Commit e6fab544 ("ARM/arm64: KVM: test properly for a PTE's
uncachedness") modified the logic to test whether a HYP or stage-2
mapping needs flushing, from [incorrectly] interpreting the page table
attributes to [incorrectly] checking whether the PFN that backs the
mapping is covered by host system RAM. The PFN number is part of the
output of the translation, not the input, so we have to use pte_pfn()
on the contents of the PTE, not __phys_to_pfn() on the HYP virtual
address or stage-2 intermediate physical address.

Fixes: e6fab544 ("ARM/arm64: KVM: test properly for a PTE's uncachedness")
Cc: stable@vger.kernel.org
Tested-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Using oldstyle vcpu_reg() accessor is proven to be inappropriate and
unsafe on ARM64. This patch converts the rest of use cases to new
accessors and completely removes vcpu_reg() on ARM64.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

System register accesses also use zero register for Rt == 31, and
therefore using it will also result in getting SP value instead. This
patch makes them also using new accessors, introduced by the previous
patch. Since register value is no longer directly associated with storage
inside vCPU context structure, we introduce a dedicated storage for it in
struct sys_reg_params.

This refactor also gets rid of "massive hack" in kvm_handle_cp_64().
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Further rework is going to introduce a dedicated storage for transfer
register value in struct sys_reg_params. Before doing this we have to
remove 'const' modifiers from it in all accessor functions and their
callers.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

On ARM64 register index of 31 corresponds to both zero register and SP.
However, all memory access instructions, use ZR as transfer register. SP
is used only as a base register in indirect memory addressing, or by
register-register arithmetics, which cannot be trapped here.

Correct emulation is achieved by introducing new register accessor
functions, which can do special handling for reg_num == 31. These new
accessors intentionally do not rely on old vcpu_reg() on ARM64, because
it is to be removed. Since the affected code is shared by both ARM
flavours, implementations of these accessors are also added to ARM32 code.

This patch fixes setting MMIO register to a random value (actually SP)
instead of zero by something like:

 *((volatile int *)reg) = 0;

compilers tend to generate "str wzr, [xx]" here

[Marc: Fixed 32bit splat]
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Commit 4e752f0a ("rbd: access snapshot context and mapping size
safely") moved ceph_get_snap_context() out of rbd_img_request_create()
and into rbd_queue_workfn(), adding a ceph_put_snap_context() to the
error path in rbd_queue_workfn().  However, rbd_img_request_create()
consumes a ref on snapc, so calling ceph_put_snap_context() after
a successful rbd_img_request_create() leads to an extra put.  Fix it.

Cc: stable@vger.kernel.org # 3.18+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Josh Durgin <jdurgin@redhat.com>

* pm-domains:
  PM / Domains: Fix bad of_node_put() in failure paths of genpd_dev_pm_attach()
  PM / Domains: Validate cases of a non-bound driver in genpd governor

* pm-cpufreq:
  cpufreq: use last policy after online for drivers with ->setpolicy

* acpica:
  ACPI: Better describe ACPI_DEBUGGER

* acpi-video:
  MAINTAINERS: ACPI / video: update a file name in drivers/acpi/

* device-properties:
  ACPI / property: fix compile error for acpi_node_get_property_reference() when CONFIG_ACPI=n

* acpi-pci:
  x86/PCI/ACPI: Fix regression caused by commit 4d6b4e69

* pm-pci:
  PCI / PM: Tune down retryable runtime suspend error messages

Apparently pre-nv50 pageflip events happen before the actual vblank
period. Therefore that functionality got semi-disabled in

commit af4870e4
Author: Mario Kleiner <mario.kleiner.de@gmail.com>
Date:   Tue May 13 00:42:08 2014 +0200

    drm/nouveau/kms/nv04-nv40: fix pageflip events via special case.

Unfortunately that hack got uprooted in

commit cc1ef118
Author: Thierry Reding <treding@nvidia.com>
Date:   Wed Aug 12 17:00:31 2015 +0200

    drm/irq: Make pipe unsigned and name consistent

Triggering a warning when trying to sample the vblank timestamp for a
non-existing pipe. There's a few ways to fix this:

- Open-code the old behaviour, which just enshrines this slight
  breakage of the userspace ABI.

- Revert Mario's commit and again inflict broken timestamps, again not
  pretty.

- Fix this for real by delaying the pageflip TS until the next vblank
  interrupt, thereby making it accurate.

This patch implements the third option. Since having a page flip
interrupt that happens when the pageflip gets armed and not when it
completes in the next vblank seems to be fairly common (older i915 hw
works very similarly) create a new helper to arm vblank events for
such drivers.

v2 (Mario Kleiner):
- Fix function prototypes in drmP.h
- Add missing vblank_put() for pageflip completion without
  pageflip event.
- Initialize sequence number for queued pageflip event to avoid
  trouble in drm_handle_vblank_events().
- Remove dead code and spelling fix.

v3 (Mario Kleiner):
- Add a signed-off-by and cc stable tag per Ilja's advice.

v4 (Thierry Reding):
- Fix kerneldoc typo, discovered by Michel Dänzer
- Rearrange tags and changelog

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=106431
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: stable@vger.kernel.org # v4.3
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

A client calling drmSetMaster() using a file descriptor that was opened
when another client was master would inherit the latter client's master
object and all its authenticated clients.

This is unwanted behaviour, and when this happens, instead allocate a
brand new master object for the client calling drmSetMaster().

Fixes a BUG() throw in vmw_master_set().

Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

imx-drm crtc, plane, parallel panel, and TV encoder fixes

- Use drm_crtc_send_vblank_event to fix per crtc vblank handling
- Move the crtc device of_node assignment out of the ipuv3-crtc driver into
  ipu-common code, where the devices are created.
- Fix parallel display support with simple-panels
- Remove some unused fields and superfluous checks
- Switch to universal planes and add error handling for primary plane creation
- Fix module autoload for TV encoder driver

* tag 'imx-drm-fixes-2015-12-01' of git://git.pengutronix.de/git/pza/linux:
  drm: imx: imx-tve: Fix module autoload for OF platform driver
  drm: imx: convert to drm_crtc_send_vblank_event()
  GPU-DRM-IMX: Delete an unnecessary check before drm_fbdev_cma_restore_mode()
  drm/imx: Remove of_node assignment from ipuv3-crtc driver probe
  gpu: ipu-v3: Assign of_node of child platform devices to corresponding ports
  gpu: ipu-v3: Remove reg_offset field
  gpu: ipu-v3: drop unused dmfc field from client platform data
  drm/imx: parallel-display: allow to determine bus format from the connected panel
  drm/imx: ipuv3-crtc: Return error if ipu_plane_init() fails for primary plane
  drm/imx: switch to universal planes

Another batch of drm/i915 fixes for v4.4, on top of the ones from
earlier this week. One timeout handling regression fix from Chris, and
backport of five patches from our -next to fix a power management
related HDMI hotplug regression.

* tag 'drm-intel-fixes-2015-12-03' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: take a power domain reference while checking the HDMI live status
  drm/i915: add MISSING_CASE to a few port/aux power domain helpers
  drm/i915/ddi: fix intel_display_port_aux_power_domain() after HDMI detect
  drm/i915: Introduce a gmbus power domain
  drm/i915: Clean up AUX power domain handling
  drm/i915: Check the timeout passed to i915_wait_request

It looks like these meant to be unreffing the
of_parse_phandle_with_args() node, since the error paths above it
don't do of_node_put.  That function returns a new ref in pd_args.np,
though, not a new ref on dev->of_node.  Also, it would have leaked the
ref in the success case.

Fixes "ERROR: Bad of_node_put()" on bcm2835 in the -EPROBE_DEFER case.

Fixes: aa42240a (PM / Domains: Add generic OF-based PM domain look-up)
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Cc: 3.18+ <stable@vger.kernel.org> # 3.18+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull networking fixes from David Miller:
 "A lot of Thanksgiving turkey leftovers accumulated, here goes:

   1) Fix bluetooth l2cap_chan object leak, from Johan Hedberg.

   2) IDs for some new iwlwifi chips, from Oren Givon.

   3) Fix rtlwifi lockups on boot, from Larry Finger.

   4) Fix memory leak in fm10k, from Stephen Hemminger.

   5) We have a route leak in the ipv6 tunnel infrastructure, fix from
      Paolo Abeni.

   6) Fix buffer pointer handling in arm64 bpf JIT,f rom Zi Shen Lim.

   7) Wrong lockdep annotations in tcp md5 support, fix from Eric
      Dumazet.

   8) Work around some middle boxes which prevent proper handling of TCP
      Fast Open, from Yuchung Cheng.

   9) TCP repair can do huge kmalloc() requests, build paged SKBs
      instead.  From Eric Dumazet.

  10) Fix msg_controllen overflow in scm_detach_fds, from Daniel
      Borkmann.

  11) Fix device leaks on ipmr table destruction in ipv4 and ipv6, from
      Nikolay Aleksandrov.

  12) Fix use after free in epoll with AF_UNIX sockets, from Rainer
      Weikusat.

  13) Fix double free in VRF code, from Nikolay Aleksandrov.

  14) Fix skb leaks on socket receive queue in tipc, from Ying Xue.

  15) Fix ifup/ifdown crach in xgene driver, from Iyappan Subramanian.

  16) Fix clearing of persistent array maps in bpf, from Daniel
      Borkmann.

  17) In TCP, for the cross-SYN case, we don't initialize tp->copied_seq
      early enough.  From Eric Dumazet.

  18) Fix out of bounds accesses in bpf array implementation when
      updating elements, from Daniel Borkmann.

  19) Fill gaps in RCU protection of np->opt in ipv6 stack, from Eric
      Dumazet.

  20) When dumping proxy neigh entries, we have to accomodate NULL
      device pointers properly, from Konstantin Khlebnikov.

  21) SCTP doesn't release all ipv6 socket resources properly, fix from
      Eric Dumazet.

  22) Prevent underflows of sch->q.qlen for multiqueue packet
      schedulers, also from Eric Dumazet.

  23) Fix MAC and unicast list handling in bnxt_en driver, from Jeffrey
      Huang and Michael Chan.

  24) Don't actively scan radar channels, from Antonio Quartulli"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (110 commits)
  net: phy: reset only targeted phy
  bnxt_en: Setup uc_list mac filters after resetting the chip.
  bnxt_en: enforce proper storing of MAC address
  bnxt_en: Fixed incorrect implementation of ndo_set_mac_address
  net: lpc_eth: remove irq > NR_IRQS check from probe()
  net_sched: fix qdisc_tree_decrease_qlen() races
  openvswitch: fix hangup on vxlan/gre/geneve device deletion
  ipv4: igmp: Allow removing groups from a removed interface
  ipv6: sctp: implement sctp_v6_destroy_sock()
  arm64: bpf: add 'store immediate' instruction
  ipv6: kill sk_dst_lock
  ipv6: sctp: add rcu protection around np->opt
  net/neighbour: fix crash at dumping device-agnostic proxy entries
  sctp: use GFP_USER for user-controlled kmalloc
  sctp: convert sack_needed and sack_generation to bits
  ipv6: add complete rcu protection around np->opt
  bpf: fix allocation warnings in bpf maps and integer overflow
  mvebu: dts: enable IP checksum with jumbo frames for Armada 38x on Port0
  net: mvneta: enable setting custom TX IP checksum limit
  net: mvneta: fix error path for building skb
  ...

Pull block fixes from Jens Axboe:
 "A collection of fixes from this series.  The most important here is a
  regression fix for an issue that some folks would hit in blk-merge.c,
  and the NVMe queue depth limit for the screwed up Apple "nvme"
  controller.

  In more detail, this pull request contains:

   - a set of fixes for null_blk, including a fix for a few corner cases
     where we could hang the device.  From Arianna and Paolo.

   - lightnvm:
        - A build improvement from Keith.
        - Update the qemu pci id detection from Matias.
        - Error handling fixes for leaks and other little fixes from
          Sudip and Wenwei.

   - fix from Eric where BLKRRPART would not return EBUSY for whole
     device mounts, only when partitions were mounted.

   - fix from Jan Kara, where EOF O_DIRECT reads would return
     negatively.

   - remove check for rq_mergeable() when checking limits for cloned
     requests.  The check doesn't make any sense.  It's assuming that
     since NOMERGE is set on the request that we don't have to
     recalculate limits since the request didn't change, but that's not
     true if the request has been redirected.  From Hannes.

   - correctly get the bio front segment value set for single segment
     bio's, fixing a BUG() in blk-merge.  From Ming"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvme: temporary fix for Apple controller reset
  null_blk: change type of completion_nsec to unsigned long
  null_blk: guarantee device restart in all irq modes
  null_blk: set a separate timer for each command
  blk-merge: fix computing bio->bi_seg_front_size in case of single segment
  direct-io: Fix negative return from dio read beyond eof
  block: Always check queue limits for cloned requests
  lightnvm: missing nvm_lock acquire
  lightnvm: unconverted ppa returned in get_bb_tbl
  lightnvm: refactor and change vendor id for qemu
  lightnvm: do device max sectors boundary check first
  lightnvm: fix ioctl memory leaks
  lightnvm: free memory when gennvm register fails
  lightnvm: Simplify config when disabled
  Return EBUSY from BLKRRPART for mounted whole-dev fs

Pull tracing fix from Steven Rostedt:
 "During the merge window I added a new file that is used to filter
  trace events on pids.  It filters all events where only tasks with
  their pid in that file exists.  It also handles the sched_switch and
  sched_wakeup trace events where the current task does not have its pid
  in the file, but the task either being switched to or awaken does.

  Unfortunately, I forgot about sched_wakeup_new and sched_waking.  Both
  of these tracepoints use the same class as the sched_wakeup
  tracepoint, and they too should be included in what gets filtered by
  the set_event_pid file"

* tag 'trace-v4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Add sched_wakeup_new and sched_waking tracepoints for pid filter

Merge tag 'mac80211-for-davem-2015-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
A small set of fixes for 4.4:
 * fix scanning in mac80211 to not actively scan radar
   channels (from Antonio)
 * fix uninitialized variable in remain-on-channel that
   could lead to treating frame TX as remain-on-channel
   and not sending the frame at all
 * remove NL80211_FEATURE_FULL_AP_CLIENT_STATE again, it
   was broken and needs more work, we'll enable it later
 * fix call_rcu() induced use-after-reset/free in mesh
   (that was suddenly causing issues in certain tests)
 * always request block-ack window size 64 as we found
   some APs will otherwise crash (really ...)
 * fix P2P-Device teardown sequence to avoid restarting
   with uninitialized data
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

It is possible to address another chip on same MDIO bus. The case is
correctly handled for media advertising. It is taken into account
only if mii_data->phy_id == phydev->addr. However, this condition
was missing for reset case.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: set mac address and uc_list bug fixes.

Fix ndo_set_mac_address() for PF and VF.
Re-apply uc_list after chip reset.

v2: Fix compile error if CONFIG_BNXT_SRIOV is not set.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Call bnxt_cfg_rx_mode() in bnxt_init_chip() to setup uc_list and
mc_list mac address filters.  Before the patch, uc_list is not
setup again after chip reset (such as ethtool ring size change)
and macvlans don't work any more after that.

Modify bnxt_cfg_rx_mode() to return error codes appropriately so
that the init chip sequence can detect any failures.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>