- 24 Apr, 2024 1 commit
-
-
Nam Cao authored
With deferred IO enabled, a page fault happens when data is written to the framebuffer device. Then driver determines which page is being updated by calculating the offset of the written virtual address within the virtual memory area, and uses this offset to get the updated page within the internal buffer. This page is later copied to hardware (thus the name "deferred IO"). This offset calculation is only correct if the virtual memory area is mapped to the beginning of the internal buffer. Otherwise this is wrong. For example, if users do: mmap(ptr, 4096, PROT_WRITE, MAP_FIXED | MAP_SHARED, fd, 0xff000); Then the virtual memory area will mapped at offset 0xff000 within the internal buffer. This offset 0xff000 is not accounted for, and wrong page is updated. Correct the calculation by using vmf->pgoff instead. With this change, the variable "offset" will no longer hold the exact offset value, but it is rounded down to multiples of PAGE_SIZE. But this is still correct, because this variable is only used to calculate the page offset. Reported-by:Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Closes: https://lore.kernel.org/linux-fbdev/271372d6-e665-4e7f-b088-dee5f4ab341a@oracle.com Fixes: 56c134f7 ("fbdev: Track deferred-I/O pages in pageref struct") Cc: <stable@vger.kernel.org> Signed-off-by:
Nam Cao <namcao@linutronix.de> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Tested-by:
-
- 19 Apr, 2024 1 commit
-
-
Lucas Stach authored
Old and new state parameters are swapped, so the old state was cleared instead of the new duplicated state. Fixes: 90367458 ("drm/atomic-helper: Add format-conversion state to shadow-plane state") Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Tested-by:
Leonard Göhrs <l.goehrs@pengutronix.de> Reviewed-by:
-
- 18 Apr, 2024 1 commit
-
-
Patrik Jakobsson authored
Due to a change in the order of initialization, the lid timer got started before proper setup was made. This resulted in a crash during boot. The lid switch is handled by gma500 through a timer that periodically polls the opregion for changes. These types of ACPI events shouldn't be handled by the graphics driver so let's get rid of the lid code. This fixes the crash during boot. Reported-by:
Enrico Bartky <enrico.bartky@gmail.com> Fixes: 8f1aaccb ("drm/gma500: Implement client-based fbdev emulation") Tested-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by:
-
- 16 Apr, 2024 2 commits
-
-
Dmitry Baryshkov authored
The DSI device for the panel was registered by the DSI host, so it is an error to unregister it from the panel driver. Drop the call to mipi_dsi_device_unregister(). Fixes: ea4f9975 ("drm/panel: Add support for Novatek NT36672E panel driver") Reviewed-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240404-drop-panel-unregister-v1-2-9f56953c5fb9@linaro.org
-
Dmitry Baryshkov authored
The DSI device for the panel was registered by the DSI host, so it is an error to unregister it from the panel driver. Drop the call to mipi_dsi_device_unregister(). Fixes: c7f66d32 ("drm/panel: add support for rm69299 visionox panel") Reviewed-by:
-
- 15 Apr, 2024 9 commits
-
-
Lyude Paul authored
I didn't pay close enough attention the last time I tried to fix this problem - while we currently do correctly take care to make sure we don't probe a connected eDP port more then once, we don't do the same thing for eDP ports we found to be disconnected. So, fix this and make sure we only ever probe eDP ports once and then leave them at that connector state forever (since without HPD, it's not going to change on its own anyway). This should get rid of the last few GSP errors getting spit out during runtime suspend and resume on some machines, as we tried to reprobe eDP ports in response to ACPI hotplug probe events. Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240404233736.7946-3-lyude@redhat.com (cherry picked from commit fe6660b6)
-
Lyude Paul authored
GSP has its own state for keeping track of whether or not a given display connector is plugged in or not, and enforces this state on the driver. In particular, AUX transactions on a DisplayPort connector which GSP says is disconnected can never succeed - and can in some cases even cause unexpected timeouts, which can trickle up to cause other problems. A good example of this is runtime power management: where we can actually get stuck trying to resume the GPU if a userspace application like fwupd tries accessing a drm_aux_dev for a disconnected port. This was an issue I hit a few times with my Slimbook Executive 16 - where trying to offload something to the discrete GPU would wake it up, and then potentially cause it to timeout as fwupd tried to immediately access the dp_aux_dev nodes for nouveau. Likewise: we don't really have any cases I know of where we'd want to ignore this state and try an aux transaction anyway - and failing pointless aux transactions immediately can even speed things up. So - let's start enabling/disabling the aux bus in nouveau_dp_detect() to fix this. We enable the aux bus during connector probing, and leave it enabled if we discover something is actually on the connector. Otherwise, we just shut it off. This should fix some people's runtime PM issues (like myself), and also get rid of quite of a lot of GSP error spam in dmesg. Signed-off-by:
-
Maíra Canal authored
The commit 509433d8 ("drm/v3d: Expose the total GPU usage stats on sysfs") introduced the calculation of global GPU stats. For the regards, it used the already existing infrastructure provided by commit 09a93cc4 ("drm/v3d: Implement show_fdinfo() callback for GPU usage stats"). While adding global GPU stats calculation ability, the author forgot to delete the existing one. Currently, the value of `enabled_ns` is incremented twice by the end of the job, when it should be added just once. Therefore, delete the leftovers from commit 509433d8 ("drm/v3d: Expose the total GPU usage stats on sysfs"). Fixes: 509433d8 ("drm/v3d: Expose the total GPU usage stats on sysfs") Reported-by:
Tvrtko Ursulin <tursulin@igalia.com> Signed-off-by:
Maíra Canal <mcanal@igalia.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by:
Jose Maria Casanova Crespo <jmcasanova@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240403203517.731876-2-mcanal@igalia.com
-
Zack Rusin authored
The table of primary plane formats wasn't sorted at all, leading to applications picking our least desirable formats by defaults. Sort the primary plane formats according to our order of preference. Nice side-effect of this change is that it makes IGT's kms_atomic plane-invalid-params pass because the test picks the first format which for vmwgfx was DRM_FORMAT_XRGB1555 and uses fb's with odd sizes which make Pixman, which IGT depends on assert due to the fact that our 16bpp formats aren't 32 bit aligned like Pixman requires all formats to be. Signed-off-by:
Zack Rusin <zack.rusin@broadcom.com> Fixes: 36cc79bc ("drm/vmwgfx: Add universal plane support") Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.12+ Acked-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412025511.78553-6-zack.rusin@broadcom.com
-
Zack Rusin authored
The conditional was supposed to prevent enabling of a crtc state without a set primary plane. Accidently it also prevented disabling crtc state with a set primary plane. Neither is correct. Fix the conditional and just driver-warn when a crtc state has been enabled without a primary plane which will help debug broken userspace. Fixes IGT's kms_atomic_interruptible and kms_atomic_transition tests. Signed-off-by:
Ian Forbes <ian.forbes@broadcom.com> Reviewed-by:
Martin Krastev <martin.krastev@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412025511.78553-5-zack.rusin@broadcom.com
-
Zack Rusin authored
vmwgfx never supported prime import of external buffers. Furthermore the driver exposes two different objects to userspace: vmw_surface's and gem buffers but prime import/export only worked with vmw_surfaces. Because gem buffers are used through the dumb_buffer interface this meant that the driver created buffers couldn't have been prime exported or imported. Fix prime import/export. Makes IGT's kms_prime pass. Signed-off-by:
-
Christian König authored
We only pool write combined and uncached allocations because they require extra overhead on allocation and release. If we also pool cached NUMA it not only means some extra unnecessary overhead, but also that under memory pressure it can happen that pages from the wrong NUMA node enters the pool and are re-used over and over again. This can lead to performance reduction after running into memory pressure. v2: restructure and cleanup the code a bit from the internal hack to test this. Signed-off-by:Christian König <christian.koenig@amd.com> Fixes: 4482d3c9 ("drm/ttm: add NUMA node id to the pool") CC: stable@vger.kernel.org Reviewed-by:
Felix Kuehling <felix.kuehling@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240415134821.1919-1-christian.koenig@amd.com
-
Mikhail Kobuk authored
When Output Resource (dcb->or) value is assigned in fabricate_dcb_output(), there may be out of bounds access to dac_users array in case dcb->or is zero because ffs(dcb->or) is used as index there. The 'or' argument of fabricate_dcb_output() must be interpreted as a number of bit to set, not value. Utilize macros from 'enum nouveau_or' in calls instead of hardcoding. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 2e5702af ("drm/nouveau: fabricate DCB encoder table for iMac G4") Fixes: 670820c0 ("drm/nouveau: Workaround incorrect DCB entry on a GeForce3 Ti 200.") Signed-off-by:
Mikhail Kobuk <m.kobuk@ispras.ru> Signed-off-by:
Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240411110854.16701-1-m.kobuk@ispras.ru
-
Dave Airlie authored
Running a lot of VK CTS in parallel against nouveau, once every few hours you might see something like this crash. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 8000000114e6e067 P4D 8000000114e6e067 PUD 109046067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 53891 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27 Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 RIP: 0010:gp100_vmm_pgt_mem+0xe3/0x180 [nouveau] Code: c7 48 01 c8 49 89 45 58 85 d2 0f 84 95 00 00 00 41 0f b7 46 12 49 8b 7e 08 89 da 42 8d 2c f8 48 8b 47 08 41 83 c7 01 48 89 ee <48> 8b 40 08 ff d0 0f 1f 00 49 8b 7e 08 48 89 d9 48 8d 75 04 48 c1 RSP: 0000:ffffac20c5857838 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000004d8001 RCX: 0000000000000001 RDX: 00000000004d8001 RSI: 00000000000006d8 RDI: ffffa07afe332180 RBP: 00000000000006d8 R08: ffffac20c5857ad0 R09: 0000000000ffff10 R10: 0000000000000001 R11: ffffa07af27e2de0 R12: 000000000000001c R13: ffffac20c5857ad0 R14: ffffa07a96fe9040 R15: 000000000000001c FS: 00007fe395eed7c0(0000) GS:ffffa07e2c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000011febe001 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ... ? gp100_vmm_pgt_mem+0xe3/0x180 [nouveau] ? gp100_vmm_pgt_mem+0x37/0x180 [nouveau] nvkm_vmm_iter+0x351/0xa20 [nouveau] ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] ? __lock_acquire+0x3ed/0x2170 ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] nvkm_vmm_ptes_get_map+0xc2/0x100 [nouveau] ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] nvkm_vmm_map_locked+0x224/0x3a0 [nouveau] Adding any sort of useful debug usually makes it go away, so I hand wrote the function in a line, and debugged the asm. Every so often pt->memory->ptrs is NULL. This ptrs ptr is set in the nv50_instobj_acquire called from nvkm_kmap. If Thread A and Thread B both get to nv50_instobj_acquire around the same time, and Thread A hits the refcount_set line, and in lockstep thread B succeeds at refcount_inc_not_zero, there is a chance the ptrs value won't have been stored since refcount_set is unordered. Force a memory barrier here, I picked smp_mb, since we want it on all CPUs and it's write followed by a read. v2: use paired smp_rmb/smp_wmb. Cc: <stable@vger.kernel.org> Fixes: be55287a ("drm/nouveau/imem/nv50: embed nvkm_instobj directly into nv04_instobj") Signed-off-by:
-
- 09 Apr, 2024 1 commit
-
-
Zack Rusin authored
Enable DMA mappings in vmwgfx after TTM has been fixed in commit 3bf3710e ("drm/ttm: Add a generic TTM memcpy move for page-based iomem") This enables full guest-backed memory support and in particular allows usage of screen targets as the presentation mechanism. Signed-off-by:
Ye Li <ye.li@broadcom.com> Tested-by:
-
- 08 Apr, 2024 10 commits
-
-
Ville Syrjälä authored
The modes[] array contains pointers to modes on the connectors' mode lists, which are protected by dev->mode_config.mutex. Thus we need to extend modes[] the same protection or by the time we use it the elements may already be pointing to freed/reused memory. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10583Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240404203336.10454-2-ville.syrjala@linux.intel.comReviewed-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Thierry Reding authored
The host1x devices are virtual compound devices and do not perform DMA accesses themselves, so they do not need to be set up for DMA. Ideally we would also not need to set up DMA masks for the virtual devices, but we currently still need those for legacy support on old hardware. Tested-by:
Jon Hunter <jonathanh@nvidia.com> Acked-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240314154943.2487549-1-thierry.reding@gmail.com
-
Jacek Lawrynowicz authored
ivpu_device->context_xa is locked both in kernel thread and IRQ context. It requires XA_FLAGS_LOCK_IRQ flag to be passed during initialization otherwise the lock could be acquired from a thread and interrupted by an IRQ that locks it for the second time causing the deadlock. This deadlock was reported by lockdep and observed in internal tests. Fixes: 35b13763 ("accel/ivpu: Introduce a new DRM driver for Intel VPU") Cc: <stable@vger.kernel.org> # v6.3+ Signed-off-by:
Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-9-jacek.lawrynowicz@linux.intel.com
-
Jacek Lawrynowicz authored
Change "VPU" to "NPU" in ivpu_suspend() so it matches all other error messages. Signed-off-by:
-
Jacek Lawrynowicz authored
DRM_IVPU_PARAM_CORE_CLOCK_RATE returns current NPU frequency which could be 0 if device was sleeping. This value isn't really useful to the user space, so return max freq instead which can be used to estimate NPU performance. Fixes: c39dc151 ("accel/ivpu: Read clock rate only if device is up") Cc: <stable@vger.kernel.org> # v6.7 Signed-off-by:
-
Wachowski, Karol authored
This patch improves readability and clarity of MMU error messages. Previously, the error strings were somewhat confusing and could lead to ambiguous interpretations, making it difficult to diagnose issues. Signed-off-by:
Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by:
-
Jacek Lawrynowicz authored
Put NPU in D3hot after ivpu_resume() fails to power up the device. This will assure that D3->D0 power cycle will be performed before the next resume and also will minimize power usage in this corner case. Fixes: 28083ff1 ("accel/ivpu: Fix DevTLB errors on suspend/resume and recovery") Cc: <stable@vger.kernel.org> # v6.8+ Signed-off-by:
-
Wachowski, Karol authored
In case of failed power up we end up left in PCI D3hot state making it impossible to access NPU registers on retry. Enter D0 state on retry before proceeding with power up sequence. Fixes: 28083ff1 ("accel/ivpu: Fix DevTLB errors on suspend/resume and recovery") Cc: <stable@vger.kernel.org> # v6.8+ Signed-off-by:
-
Jacek Lawrynowicz authored
Always enter D3hot after entering D0i3 an all platforms. This minimizes power usage. Signed-off-by:
-
Wachowski, Karol authored
Return value of drmm_mutex_init(ipc->lock) was unchecked. Fixes: 5d7422cf ("accel/ivpu: Add IPC driver and JSM messages") Cc: <stable@vger.kernel.org> # v6.3+ Signed-off-by:
-
- 05 Apr, 2024 4 commits
-
-
Arnd Bergmann authored
Calling a function through an incompatible pointer type causes breaks kcfi, so clang warns about the assignment: drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c:73:10: error: cast from 'void (*)(const void *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] 73 | .fini = (void(*)(void *))kfree, Avoid this with a trivial wrapper. Fixes: c39f472e ("drm/nouveau: remove symlinks, move core/ to nvkm/ (no code changes)") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Kees Cook authored
Using the end of rpc->entries[] for addressing runs into both compile-time and run-time detection of accessing beyond the end of the array. Use the base pointer instead, since was allocated with the additional bytes for storing the strings. Avoids the following warning in future GCC releases with support for __counted_by: In function 'fortify_memcpy_chk', inlined from 'r535_gsp_rpc_set_registry' at ../drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1123:3: ../include/linux/fortify-string.h:553:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 553 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ for this code: strings = (char *)&rpc->entries[NV_GSP_REG_NUM_ENTRIES]; ... memcpy(strings, r535_registry_entries[i].name, name_len); Signed-off-by:Kees Cook <keescook@chromium.org> Signed-off-by:
-
Alex Constantino authored
This reverts commit 5a838e5d. Changes from commit 5a838e5d ("drm/qxl: simplify qxl_fence_wait") would result in a '[TTM] Buffer eviction failed' exception whenever it reached a timeout. Due to a dependency to DMA_FENCE_WARN this also restores some code deleted by commit d72277b6 ("dma-buf: nuke DMA_FENCE_TRACE macros v2"). Fixes: 5a838e5d ("drm/qxl: simplify qxl_fence_wait") Link: https://lore.kernel.org/regressions/ZTgydqRlK6WX_b29@eldamar.lan/Reported-by:
Timo Lindfors <timo.lindfors@iki.fi> Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1054514Signed-off-by:
Alex Constantino <dreaming.about.electric.sheep@gmail.com> Signed-off-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240404181448.1643-2-dreaming.about.electric.sheep@gmail.com
-
Jammy Huang authored
There is a while-loop in ast_dp_set_on_off() that could lead to infinite-loop. This is because the register, VGACRI-Dx, checked in this API is a scratch register actually controlled by a MCU, named DPMCU, in BMC. These scratch registers are protected by scu-lock. If suc-lock is not off, DPMCU can not update these registers and then host will have soft lockup due to never updated status. DPMCU is used to control DP and relative registers to handshake with host's VGA driver. Even the most time-consuming task, DP's link training, is less than 100ms. 200ms should be enough. Signed-off-by:
Jammy Huang <jammy_huang@aspeedtech.com> Fixes: 594e9c04 ("drm/ast: Create the driver for ASPEED proprietory Display-Port") Reviewed-by:
Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by:
-
- 04 Apr, 2024 1 commit
-
-
Boris Brezillon authored
Subject: [PATCH] drm/panfrost: Fix the error path in panfrost_mmu_map_fault_addr() If some the pages or sgt allocation failed, we shouldn't release the pages ref we got earlier, otherwise we will end up with unbalanced get/put_pages() calls. We should instead leave everything in place and let the BO release function deal with extra cleanup when the object is destroyed, or let the fault handler try again next time it's called. Fixes: 187d2929 ("drm/panfrost: Add support for GPU heap allocations") Cc: <stable@vger.kernel.org> Reviewed-by:
Steven Price <steven.price@arm.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Co-developed-by:
Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by:
-
- 01 Apr, 2024 1 commit
-
-
Oleksandr Natalenko authored
While studying the code I've bumped into a small typo within the kernel-doc for two functions, apparently, due to copy-paste. This commit fixes "sizo" word to be "size". Signed-off-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Fixes: b3daa5ef ("drm: Add helper for DP++ adaptors") Reviewed-by:
-
- 28 Mar, 2024 6 commits
-
-
Rob Clark authored
virtgpu "vram" GEM objects do not implement obj->get_sg_table(). But they also don't use drm_gem_map_dma_buf(). In fact they may not even have guest visible pages. But it is perfectly fine to export and share with other virtual devices. Reported-by:
Dominik Behr <dbehr@chromium.org> Fixes: 207395da ("drm/prime: reject DMA-BUF attach when get_sg_table is missing") Signed-off-by:
Rob Clark <robdclark@chromium.org> Reviewed-by:
Simon Ser <contact@emersion.fr> Signed-off-by:
-
Dave Airlie authored
dEQP-VK.sparse_resources.image_rebind.2d_array.r64i.128_128_8 was causing a remap operation like the below. op_remap: prev: 0000003fffed0000 00000000000f0000 00000000a5abd18a 0000000000000000 op_remap: next: op_remap: unmap: 0000003fffed0000 0000000000100000 0 op_map: map: 0000003ffffc0000 0000000000010000 000000005b1ba33c 00000000000e0000 This was resulting in an unmap operation from 0x3fffed0000+0xf0000, 0x100000 which was corrupting the pagetables and oopsing the kernel. Fixes the prev + unmap range calcs to use start/end and map back to addr/range. Signed-off-by:
-
Colin Ian King authored
There is a statement with two semicolons. Remove the second one, it is redundant. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Christian Hewitt authored
Increase the timeout value to prevent system logs on Amlogic boards flooding with power transition warnings: [ 13.047638] panfrost ffe40000.gpu: shader power transition timeout [ 13.048674] panfrost ffe40000.gpu: l2 power transition timeout [ 13.937324] panfrost ffe40000.gpu: shader power transition timeout [ 13.938351] panfrost ffe40000.gpu: l2 power transition timeout ... [39829.506904] panfrost ffe40000.gpu: shader power transition timeout [39829.507938] panfrost ffe40000.gpu: l2 power transition timeout [39949.508369] panfrost ffe40000.gpu: shader power transition timeout [39949.509405] panfrost ffe40000.gpu: l2 power transition timeout The 2000 value has been found through trial and error testing with devices using G52 and G31 GPUs. Fixes: 22aa1a20 ("drm/panfrost: Really power off GPU cores in panfrost_gpu_power_off()") Signed-off-by:
Christian Hewitt <christianshewitt@gmail.com> Reviewed-by:
-
Miguel Ojeda authored
Clang 14 in an (essentially) defconfig loongarch64 build for next-20240327 reports [1]: drivers/gpu/drm/qxl/qxl_ioctl.c:148:14: error: variable 'num_relocs' set but not used [-Werror,-Wunused-but-set-variable] The variable was originally used in the `out_free_bos` label, but commit 74d9a633 ("drm/qxl: Simplify cleaning qxl processing command") removed the use that happened in that label. Thus remove the unused variable. Fixes: 74d9a633 ("drm/qxl: Simplify cleaning qxl processing command") Closes: https://lore.kernel.org/lkml/CANiq72kqqQfUxLkHJYqeBAhpc6YcX7bfR96gmmbF=j8hEOykqw@mail.gmail.com/ [1] Signed-off-by:Miguel Ojeda <ojeda@kernel.org> Link: https://lore.kernel.org/r/20240327175556.233126-2-ojeda@kernel.orgSigned-off-by:
-
Miguel Ojeda authored
Clang 14 in an (essentially) defconfig loongarch64 build for next-20240326 reports [1]: drivers/gpu/drm/qxl/qxl_cmd.c:424:6: error: variable 'count' set but not used [-Werror,-Wunused-but-set-variable] The variable is already unused in the version that got into the tree. Thus remove the unused variable. Fixes: f64122c1 ("drm: add new QXL driver. (v1.4)") Closes: https://lore.kernel.org/lkml/CANiq72mjc5t4n25SQvYSrOEhxxpXYPZ4pPzneSJHEnc3qApu2Q@mail.gmail.com/ [1] Closes: https://lore.kernel.org/all/20240327163331.GB1153323@dev-arch.thelio-3990X/Signed-off-by:
-
- 27 Mar, 2024 1 commit
-
-
Jocelyn Falempe authored
The driver creates /sys/kernel/debug/dri/0/mob_ttm even when the corresponding ttm_resource_manager is not allocated. This leads to a crash when trying to read from this file. Add a check to create mob_ttm, system_mob_ttm, and gmr_ttm debug file only when the corresponding ttm_resource_manager is allocated. crash> bt PID: 3133409 TASK: ffff8fe4834a5000 CPU: 3 COMMAND: "grep" #0 [ffffb954506b3b20] machine_kexec at ffffffffb2a6bec3 #1 [ffffb954506b3b78] __crash_kexec at ffffffffb2bb598a #2 [ffffb954506b3c38] crash_kexec at ffffffffb2bb68c1 #3 [ffffb954506b3c50] oops_end at ffffffffb2a2a9b1 #4 [ffffb954506b3c70] no_context at ffffffffb2a7e913 #5 [ffffb954506b3cc8] __bad_area_nosemaphore at ffffffffb2a7ec8c #6 [ffffb954506b3d10] do_page_fault at ffffffffb2a7f887 #7 [ffffb954506b3d40] page_fault at ffffffffb360116e [exception RIP: ttm_resource_manager_debug+0x11] RIP: ffffffffc04afd11 RSP: ffffb954506b3df0 RFLAGS: 00010246 RAX: ffff8fe41a6d1200 RBX: 0000000000000000 RCX: 0000000000000940 RDX: 0000000000000000 RSI: ffffffffc04b4338 RDI: 0000000000000000 RBP: ffffb954506b3e08 R8: ffff8fee3ffad000 R9: 0000000000000000 R10: ffff8fe41a76a000 R11: 0000000000000001 R12: 00000000ffffffff R13: 0000000000000001 R14: ffff8fe5bb6f3900 R15: ffff8fe41a6d1200 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffb954506b3e00] ttm_resource_manager_show at ffffffffc04afde7 [ttm] #9 [ffffb954506b3e30] seq_read at ffffffffb2d8f9f3 RIP: 00007f4c4eda8985 RSP: 00007ffdbba9e9f8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 000000000037e000 RCX: 00007f4c4eda8985 RDX: 000000000037e000 RSI: 00007f4c41573000 RDI: 0000000000000003 RBP: 000000000037e000 R8: 0000000000000000 R9: 000000000037fe30 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4c41573000 R13: 0000000000000003 R14: 00007f4c41572010 R15: 0000000000000003 ORIG_RAX: 0000000000000000 CS: 0033 SS: 002b Signed-off-by:
-
- 26 Mar, 2024 1 commit
-
-
Andy Yan authored
The Alpha blending for 30 bit RGB/BGR are not functioning properly for rk3568/rk3588, so remove it from the format list. Fixes: bfd8a5c2 ("drm/rockchip: vop2: Add more supported 10bit formats") Signed-off-by:
Andy Yan <andy.yan@rock-chips.com> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240304100952.3592984-1-andyshrk@163.com
-
- 25 Mar, 2024 1 commit
-
-
Thomas Zimmermann authored
Framebuffer I/O on the Sparc Sbus requires read/write helpers for I/O memory. Select FB_IOMEM_FOPS accordingly. Reported-by:
Nick Bowler <nbowler@draconx.ca> Closes: https://lore.kernel.org/lkml/5bc21364-41da-a339-676e-5bb0f4faebfb@draconx.ca/Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240322083005.24269-1-tzimmermann@suse.de
-
