- 28 Mar, 2015 17 commits
-
-
Miklos Szeredi authored
[ Upstream commit 0d278362 ] fuse_try_move_page() is not prepared for replacing pages that have already been read. Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Cc: stable@vger.kernel.org Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Miklos Szeredi authored
[ Upstream commit aa991b3b ] Regular pipe buffers' ->steal method (generic_pipe_buf_steal()) doesn't set PG_uptodate. Don't warn on this condition, just set the uptodate flag. Signed-off-by:
-
JeHyeon Yeon authored
[ Upstream commit d5e7cafd ] If the part of the compression data are corrupted, or the compression data is totally fake, the memory access over the limit is possible. This is the log from my system usning lz4 decompression. [6502]data abort, halting [6503]r0 0x00000000 r1 0x00000000 r2 0xdcea0ffc r3 0xdcea0ffc [6509]r4 0xb9ab0bfd r5 0xdcea0ffc r6 0xdcea0ff8 r7 0xdce80000 [6515]r8 0x00000000 r9 0x00000000 r10 0x00000000 r11 0xb9a98000 [6522]r12 0xdcea1000 usp 0x00000000 ulr 0x00000000 pc 0x820149bc [6528]spsr 0x400001f3 and the memory addresses of some variables at the moment are ref:0xdcea0ffc, op:0xdcea0ffc, oend:0xdcea1000 As you can see, COPYLENGH is 8bytes, so @ref and @op can access the momory over @oend. Signed-off-by:
JeHyeon Yeon <tom.yeon@windriver.com> Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit a239118a ] radeon_bo_create() calls radeon_ttm_placement_from_domain() before ttm_bo_init() is called. radeon_ttm_placement_from_domain() uses the ttm bo size to determine when to select top down allocation but since the ttm bo is not initialized yet the check is always false. It only took effect when buffers were validated later. It also seemed to regress suspend and resume on some systems possibly due to it not taking effect in radeon_bo_create(). radeon_bo_create() and radeon_ttm_placement_from_domain() need to be reworked substantially for this to be optimally effective. Re-enable it at that point. Noticed-by:
Oded Gabbay <oded.gabbay@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Maarten Lankhorst authored
[ Upstream commit b6610101 ] A normal wait adds to the front of the tail. By doing something similar to fence_default_wait the fence code can run without racing. This is a complete fix for "panic on suspend from KDE with radeon", and a partial fix for "Radeon: System pauses on TAHITI". On tahiti si_irq_set needs to be fixed too, to completely flush the writes before radeon_fence_activity is called in radeon_fence_enable_signaling. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=90861Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@ubuntu.com> Reported-by:
Jon Arne Jørgensen <jonjon.arnearne@gmail.com> Reported-and-tested-by:
Gustaw Smolarczyk <wielkiegie@gmail.com> Cc: stable@vger.kernel.org (v3.18+) Signed-off-by:
-
Christian König authored
[ Upstream commit a17d4996 ] Just keep it working, seems to fix some PLL problems. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=73378Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 77ae5f4b ] Need to double the viewport height. Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 54acf107 ] To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 0586915e ] To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Alex Deucher authored
[ Upstream commit cffefd9b ] To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 9d1393f2 ] To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Alex Deucher authored
[ Upstream commit f957063f ] To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Alex Deucher authored
[ Upstream commit c320bb5f ] To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by:
-
Tommi Rantala authored
[ Upstream commit a28b2a47 ] Passing zeroed drm_radeon_cs struct to DRM_IOCTL_RADEON_CS produces the following oops. Fix by always calling INIT_LIST_HEAD() to avoid the crash in list_sort(). ---------------------------------- #include <stdint.h> #include <fcntl.h> #include <unistd.h> #include <sys/ioctl.h> #include <drm/radeon_drm.h> static const struct drm_radeon_cs cs; int main(int argc, char **argv) { return ioctl(open(argv[1], O_RDWR), DRM_IOCTL_RADEON_CS, &cs); } ---------------------------------- [ttrantal@test2 ~]$ ./main /dev/dri/card0 [ 46.904650] BUG: unable to handle kernel NULL pointer dereference at (null) [ 46.905022] IP: [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] PGD 68f29067 PUD 688b5067 PMD 0 [ 46.905022] Oops: 0002 [#1] SMP [ 46.905022] CPU: 0 PID: 2413 Comm: main Not tainted 4.0.0-rc1+ #58 [ 46.905022] Hardware name: Hewlett-Packard HP Compaq dc5750 Small Form Factor/0A64h, BIOS 786E3 v02.10 01/25/2007 [ 46.905022] task: ffff880058e2bcc0 ti: ffff880058e64000 task.ti: ffff880058e64000 [ 46.905022] RIP: 0010:[<ffffffff814d6df2>] [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] RSP: 0018:ffff880058e67998 EFLAGS: 00010246 [ 46.905022] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 46.905022] RDX: ffffffff81644410 RSI: ffff880058e67b40 RDI: ffff880058e67a58 [ 46.905022] RBP: ffff880058e67a88 R08: 0000000000000000 R09: 0000000000000000 [ 46.905022] R10: ffff880058e2bcc0 R11: ffffffff828e6ca0 R12: ffffffff81644410 [ 46.905022] R13: ffff8800694b8018 R14: 0000000000000000 R15: ffff880058e679b0 [ 46.905022] FS: 00007fdc65a65700(0000) GS:ffff88006d600000(0000) knlGS:0000000000000000 [ 46.905022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 46.905022] CR2: 0000000000000000 CR3: 0000000058dd9000 CR4: 00000000000006f0 [ 46.905022] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 46.905022] DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400 [ 46.905022] Stack: [ 46.905022] ffff880058e67b40 ffff880058e2bcc0 ffff880058e67a78 0000000000000000 [ 46.905022] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 46.905022] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 46.905022] Call Trace: [ 46.905022] [<ffffffff81644a65>] radeon_cs_parser_fini+0x195/0x220 [ 46.905022] [<ffffffff81645069>] radeon_cs_ioctl+0xa9/0x960 [ 46.905022] [<ffffffff815e1f7c>] drm_ioctl+0x19c/0x640 [ 46.905022] [<ffffffff810f8fdd>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [ 46.905022] [<ffffffff810f90ad>] ? trace_hardirqs_on+0xd/0x10 [ 46.905022] [<ffffffff8160c066>] radeon_drm_ioctl+0x46/0x80 [ 46.905022] [<ffffffff81211868>] do_vfs_ioctl+0x318/0x570 [ 46.905022] [<ffffffff81462ef6>] ? selinux_file_ioctl+0x56/0x110 [ 46.905022] [<ffffffff81211b41>] SyS_ioctl+0x81/0xa0 [ 46.905022] [<ffffffff81dc6312>] system_call_fastpath+0x12/0x17 [ 46.905022] Code: 48 89 b5 10 ff ff ff 0f 84 03 01 00 00 4c 8d bd 28 ff ff ff 31 c0 48 89 fb b9 15 00 00 00 49 89 d4 4c 89 ff f3 48 ab 48 8b 46 08 <48> c7 00 00 00 00 00 48 8b 0e 48 85 c9 0f 84 7d 00 00 00 c7 85 [ 46.905022] RIP [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] RSP <ffff880058e67998> [ 46.905022] CR2: 0000000000000000 [ 47.149253] ---[ end trace 09576b4e8b2c20b8 ]--- Reviewed-by:
Tommi Rantala <tt.rantala@gmail.com> Signed-off-by:
-
Catalin Marinas authored
[ Upstream commit 285994a6 ] The ARM architecture allows the caching of intermediate page table levels and page table freeing requires a sequence like: pmd_clear() TLB invalidation pte page freeing With commit 5e5f6dc1 (arm64: mm: enable HAVE_RCU_TABLE_FREE logic), the page table freeing batching was moved from tlb_remove_page() to tlb_remove_table(). The former takes care of TLB invalidation as this is also shared with pte clearing and page cache page freeing. The latter, however, does not invalidate the TLBs for intermediate page table levels as it probably relies on the architecture code to do it if required. When the mm->mm_users < 2, tlb_remove_table() does not do any batching and page table pages are freed before tlb_finish_mmu() which performs the actual TLB invalidation. This patch introduces __tlb_flush_pgtable() for arm64 and calls it from the {pte,pmd,pud}_free_tlb() directly without relying on deferred page table freeing. Fixes: 5e5f6dc1 arm64: mm: enable HAVE_RCU_TABLE_FREE logic Reported-by:
Jon Masters <jcm@redhat.com> Tested-by:
Steve Capper <steve.capper@linaro.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Will Deacon authored
[ Upstream commit fb7332a9 ] On architectures with hardware broadcasting of TLB invalidation messages , it makes sense to reduce the range of the mmu_gather structure when unmapping page ranges based on the dirty address information passed to tlb_remove_tlb_entry. arm64 already does this by directly manipulating the start/end fields of the gather structure, but this confuses the generic code which does not expect these fields to change and can end up calculating invalid, negative ranges when forcing a flush in zap_pte_range. This patch moves the minimal range calculation out of the arm64 code and into the generic implementation, simplifying zap_pte_range in the process (which no longer needs to care about start/end, since they will point to the appropriate ranges already). With the range being tracked by core code, the need_flush flag is dropped in favour of checking that the end of the range has actually been set. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Michal Simek <monstr@monstr.eu> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Suzuki K. Poulose authored
[ Upstream commit 7132813c ] Current implementation doesn't zero out the pages allocated. Honor the __GFP_ZERO flag and zero out if set. Cc: <stable@vger.kernel.org> # v3.14+ Acked-by:
Suzuki K. Poulose <suzuki.poulose@arm.com> Signed-off-by:
-
- 24 Mar, 2015 23 commits
-
-
Eric Dumazet authored
[ Upstream commit 355a901e ] While working on sk_forward_alloc problems reported by Denys Fedoryshchenko, we found that tcp connect() (and fastopen) do not call sk_wmem_schedule() for SYN packet (and/or SYN/DATA packet), so sk_forward_alloc is negative while connect is in progress. We can fix this by calling regular sk_stream_alloc_skb() both for the SYN packet (in tcp_connect()) and the syn_data packet in tcp_send_syn_data() Then, tcp_send_syn_data() can avoid copying syn_data as we simply can manipulate syn_data->cb[] to remove SYN flag (and increment seq) Instead of open coding memcpy_fromiovecend(), simply use this helper. This leaves in socket write queue clean fast clone skbs. This was tested against our fastopen packetdrill tests. Reported-by:
Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Catalin Marinas authored
[ Upstream commit 91edd096 ] Commit db31c55a (net: clamp ->msg_namelen instead of returning an error) introduced the clamping of msg_namelen when the unsigned value was larger than sizeof(struct sockaddr_storage). This caused a msg_namelen of -1 to be valid. The native code was subsequently fixed by commit dbb490b9 (net: socket: error on a negative msg_namelen). In addition, the native code sets msg_namelen to 0 when msg_name is NULL. This was done in commit (6a2a2b3a net:socket: set msg_namelen to 0 if msg_name is passed as NULL in msghdr struct from userland) and subsequently updated by 08adb7da (fold verify_iovec() into copy_msghdr_from_user()). This patch brings the get_compat_msghdr() in line with copy_msghdr_from_user(). Fixes: db31c55a (net: clamp ->msg_namelen instead of returning an error) Cc: David S. Miller <davem@davemloft.net> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Josh Hunt authored
[ Upstream commit d22e1537 ] tcp_send_fin() does not account for the memory it allocates properly, so sk_forward_alloc can be negative in cases where we've sent a FIN: ss example output (ss -amn | grep -B1 f4294): tcp FIN-WAIT-1 0 1 192.168.0.1:45520 192.0.2.1:8080 skmem:(r0,rb87380,t0,tb87380,f4294966016,w1280,o0,bl0) Acked-by:
-
Steven Barth authored
[ Upstream commit 73ba57bf ] for throw routes to trigger evaluation of other policy rules EAGAIN needs to be propagated up to fib_rules_lookup similar to how its done for IPv4 A simple testcase for verification is: ip -6 rule add lookup 33333 priority 33333 ip -6 route add throw 2001:db8::1 ip -6 route add 2001:db8::1 via fe80::1 dev wlan0 table 33333 ip route get 2001:db8::1 Signed-off-by:
Steven Barth <cyrus@openwrt.org> Signed-off-by:
-
Ondrej Zary authored
[ Upstream commit 8d006e01 ] This reverts commit 11ad714b because it breaks cx82310_eth. The custom USB_DEVICE_CLASS macro matches bDeviceClass, bDeviceSubClass and bDeviceProtocol but the common USB_DEVICE_AND_INTERFACE_INFO matches bInterfaceClass, bInterfaceSubClass and bInterfaceProtocol instead, which are not specified. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Al Viro authored
[ Upstream commit 7d985ed1 ] [I would really like an ACK on that one from dhowells; it appears to be quite straightforward, but...] MSG_PEEK isn't passed to ->recvmsg() via msg->msg_flags; as the matter of fact, neither the kernel users of rxrpc, nor the syscalls ever set that bit in there. It gets passed via flags; in fact, another such check in the same function is done correctly - as flags & MSG_PEEK. It had been that way (effectively disabled) for 8 years, though, so the patch needs beating up - that case had never been tested. If it is correct, it's -stable fodder. Signed-off-by:
-
Al Viro authored
[ Upstream commit 3eeff778 ] It should be checking flags, not msg->msg_flags. It's ->sendmsg() instances that need to look for that in ->msg_flags, ->recvmsg() ones (including the other ->recvmsg() instance in that file, as well as unix_dgram_recvmsg() this one claims to be imitating) check in flags. Braino had been introduced in commit dcda13 ("caif: Bugfix - use MSG_TRUNC in receive") back in 2010, so it goes quite a while back. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit c8e2c80d ] inet_diag_dump_one_icsk() allocates too small skb. Add inet_sk_attr_size() helper right before inet_sk_diag_fill() so that it can be updated if/when new attributes are added. iproute2/ss currently does not use this dump_one() interface, this might explain nobody noticed this problem yet. Signed-off-by:
-
Jason Wang authored
[ Upstream commit ab3971b1 ] We don't delete napi from hash list during module exit. This will cause the following panic when doing module load and unload: BUG: unable to handle kernel paging request at 0000004e00000075 IP: [<ffffffff816bd01b>] napi_hash_add+0x6b/0xf0 PGD 3c5d5067 PUD 0 Oops: 0000 [#1] SMP ... Call Trace: [<ffffffffa0a5bfb7>] init_vqs+0x107/0x490 [virtio_net] [<ffffffffa0a5c9f2>] virtnet_probe+0x562/0x791815639d880be [virtio_net] [<ffffffff8139e667>] virtio_dev_probe+0x137/0x200 [<ffffffff814c7f2a>] driver_probe_device+0x7a/0x250 [<ffffffff814c81d3>] __driver_attach+0x93/0xa0 [<ffffffff814c8140>] ? __device_attach+0x40/0x40 [<ffffffff814c6053>] bus_for_each_dev+0x63/0xa0 [<ffffffff814c7a79>] driver_attach+0x19/0x20 [<ffffffff814c76f0>] bus_add_driver+0x170/0x220 [<ffffffffa0a60000>] ? 0xffffffffa0a60000 [<ffffffff814c894f>] driver_register+0x5f/0xf0 [<ffffffff8139e41b>] register_virtio_driver+0x1b/0x30 [<ffffffffa0a60010>] virtio_net_driver_init+0x10/0x12 [virtio_net] This patch fixes this by doing this in virtnet_free_queues(). And also don't delete napi in virtnet_freeze() since it will call virtnet_free_queues() which has already did this. Fixes 91815639 ("virtio-net: rx busy polling support") Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
-
Arnd Bergmann authored
[ Upstream commit f862e07c ] The rds_iw_update_cm_id function stores a large 'struct rds_sock' object on the stack in order to pass a pair of addresses. This happens to just fit withint the 1024 byte stack size warning limit on x86, but just exceed that limit on ARM, which gives us this warning: net/rds/iw_rdma.c:200:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] As the use of this large variable is basically bogus, we can rearrange the code to not do that. Instead of passing an rds socket into rds_iw_get_device, we now just pass the two addresses that we have available in rds_iw_update_cm_id, and we change rds_iw_get_mr accordingly, to create two address structures on the stack there. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
Alexey Kodanev authored
[ Upstream commit b1cb59cf ] sysctl has sysctl.net.core.rmem_*/wmem_* parameters which can be set to incorrect values. Given that 'struct sk_buff' allocates from rcvbuf, incorrectly set buffer length could result to memory allocation failures. For example, set them as follows: # sysctl net.core.rmem_default=64 net.core.wmem_default = 64 # sysctl net.core.wmem_default=64 net.core.wmem_default = 64 # ping localhost -s 1024 -i 0 > /dev/null This could result to the following failure: skbuff: skb_over_panic: text:ffffffff81628db4 len:-32 put:-32 head:ffff88003a1cc200 data:ffff88003a1cc200 tail:0xffffffe0 end:0xc0 dev:<NULL> kernel BUG at net/core/skbuff.c:102! invalid opcode: 0000 [#1] SMP ... task: ffff88003b7f5550 ti: ffff88003ae88000 task.ti: ffff88003ae88000 RIP: 0010:[<ffffffff8155fbd1>] [<ffffffff8155fbd1>] skb_put+0xa1/0xb0 RSP: 0018:ffff88003ae8bc68 EFLAGS: 00010296 RAX: 000000000000008d RBX: 00000000ffffffe0 RCX: 0000000000000000 RDX: ffff88003fdcf598 RSI: ffff88003fdcd9c8 RDI: ffff88003fdcd9c8 RBP: ffff88003ae8bc88 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 00000000000002b2 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88003d3f7300 R15: ffff88000012a900 FS: 00007fa0e2b4a840(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000d0f7e0 CR3: 000000003b8fb000 CR4: 00000000000006f0 Stack: ffff88003a1cc200 00000000ffffffe0 00000000000000c0 ffffffff818cab1d ffff88003ae8bd68 ffffffff81628db4 ffff88003ae8bd48 ffff88003b7f5550 ffff880031a09408 ffff88003b7f5550 ffff88000012aa48 ffff88000012ab00 Call Trace: [<ffffffff81628db4>] unix_stream_sendmsg+0x2c4/0x470 [<ffffffff81556f56>] sock_write_iter+0x146/0x160 [<ffffffff811d9612>] new_sync_write+0x92/0xd0 [<ffffffff811d9cd6>] vfs_write+0xd6/0x180 [<ffffffff811da499>] SyS_write+0x59/0xd0 [<ffffffff81651532>] system_call_fastpath+0x12/0x17 Code: 00 00 48 89 44 24 10 8b 87 c8 00 00 00 48 89 44 24 08 48 8b 87 d8 00 00 00 48 c7 c7 30 db 91 81 48 89 04 24 31 c0 e8 4f a8 0e 00 <0f> 0b eb fe 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 RIP [<ffffffff8155fbd1>] skb_put+0xa1/0xb0 RSP <ffff88003ae8bc68> Kernel panic - not syncing: Fatal exception Moreover, the possible minimum is 1, so we can get another kernel panic: ... BUG: unable to handle kernel paging request at ffff88013caee5c0 IP: [<ffffffff815604cf>] __alloc_skb+0x12f/0x1f0 ... Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by:
-
Nimrod Andy authored
[ Upstream commit af5cbc98 ] The current driver support receive VLAN CTAG HW acceleration feature (NETIF_F_HW_VLAN_CTAG_RX) through software simulation. There calls the api .skb_copy_to_linear_data_offset() to skip the VLAN tag, but there have overlap between the two memory data point range. The patch just fix the issue. V2: Michael Grzeschik suggest to use memmove() instead of skb_copy_to_linear_data_offset(). Reported-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Fixes: 1b7bde6d ("net: fec: implement rx_copybreak to improve rx performance") Signed-off-by:
Fugang Duan <B38611@freescale.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 5778d39d ] We dynamically allocate divisor+1 entries for ->ht[] in tc_u_hnode: ht = kzalloc(sizeof(*ht) + divisor*sizeof(void *), GFP_KERNEL); So ->ht is supposed to be the last field of this struct, however this is broken, since an rcu head is appended after it. Fixes: 1ce87720 ("net: sched: make cls_u32 lockless") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
-
David S. Miller authored
[ Upstream commit 2077cef4 ] Firstly, handle zero length calls properly. Believe it or not there are a few of these happening during early boot. Next, we can't just drop to a memcpy() call in the forward copy case where dst <= src. The reason is that the cache initializing stores used in the Niagara memcpy() implementations can end up clearing out cache lines before we've sourced their original contents completely. For example, considering NG4memcpy, the main unrolled loop begins like this: load src + 0x00 load src + 0x08 load src + 0x10 load src + 0x18 load src + 0x20 store dst + 0x00 Assume dst is 64 byte aligned and let's say that dst is src - 8 for this memcpy() call. That store at the end there is the one to the first line in the cache line, thus clearing the whole line, which thus clobbers "src + 0x28" before it even gets loaded. To avoid this, just fall through to a simple copy only mildly optimized for the case where src and dst are 8 byte aligned and the length is a multiple of 8 as well. We could get fancy and call GENmemcpy() but this is good enough for how this thing is actually used. Reported-by:
David Ahern <david.ahern@oracle.com> Reported-by:
Bob Picco <bpicco@meloft.net> Signed-off-by:
-
David Ahern authored
[ Upstream commit 31aaa98c ] With the increase in number of CPUs calls to functions that dump output to console (e.g., arch_trigger_all_cpu_backtrace) can take a long time to complete. If IRQs are disabled eventually the NMI watchdog kicks in and creates more havoc. Avoid by telling the NMI watchdog everything is ok. Signed-off-by:
-
David Ahern authored
[ Upstream commit d51291cb ] Currently perf-stat (aka, counting mode) does not work: $ perf stat ls ... Performance counter stats for 'ls': 1.585665 task-clock (msec) # 0.580 CPUs utilized 24 context-switches # 0.015 M/sec 0 cpu-migrations # 0.000 K/sec 86 page-faults # 0.054 M/sec <not supported> cycles <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend <not supported> instructions <not supported> branches <not supported> branch-misses 0.002735100 seconds time elapsed The reason is that state is never reset (stays with PERF_HES_UPTODATE set). Add a call to sparc_pmu_enable_event during the added_event handling. Clean up the encoding since pmu_start calls sparc_pmu_enable_event which does the same. Passing PERF_EF_RELOAD to sparc_pmu_start means the call to sparc_perf_event_set_period can be removed as well. With this patch: $ perf stat ls ... Performance counter stats for 'ls': 1.552890 task-clock (msec) # 0.552 CPUs utilized 24 context-switches # 0.015 M/sec 0 cpu-migrations # 0.000 K/sec 86 page-faults # 0.055 M/sec 5,748,997 cycles # 3.702 GHz <not supported> stalled-cycles-frontend:HG <not supported> stalled-cycles-backend:HG 1,684,362 instructions:HG # 0.29 insns per cycle 295,133 branches:HG # 190.054 M/sec 28,007 branch-misses:HG # 9.49% of all branches 0.002815665 seconds time elapsed Signed-off-by:
Bob Picco <bob.picco@oracle.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit 5b0d4b55 ] perf_pmu_disable is called by core perf code before pmu->del and the enable function is called by core perf code afterwards. No need to call again within sparc_pmu_del. Ditto for pmu->add and sparc_pmu_add. Signed-off-by:
-
Rob Gardner authored
[ Upstream commit 53eb2516 ] A bug was reported that the semtimedop() system call was always failing eith ENOSYS. Since SEMCTL is defined as 3, and SEMTIMEDOP is defined as 4, the comparison "call <= SEMCTL" will always prevent SEMTIMEDOP from getting through to the semaphore ops switch statement. This is corrected by changing the comparison to "call <= SEMTIMEDOP". Orabug: 20633375 Signed-off-by:
Rob Gardner <rob.gardner@oracle.com> Signed-off-by:
-
Andreas Larsson authored
[ Upstream commit 66d0f7ec ] Load balancing can be triggered in the critical sections protected by srmmu_context_spinlock in destroy_context() and switch_mm() and can hang the cpu waiting for the rq lock of another cpu that in turn has called switch_mm hangning on srmmu_context_spinlock leading to deadlock. So, disable interrupt while taking srmmu_context_spinlock in destroy_context() and switch_mm() so we don't deadlock. See also commit 77b838fa ("[SPARC64]: destroy_context() needs to disable interrupts.") Signed-off-by:
Andreas Larsson <andreas@gaisler.com> Signed-off-by:
-
Sasha Levin authored
Signed-off-by: -
Ian Munsie authored
commit a6130ed2 upstream. We were missing a return statement in the PSL interrupt handler in the case of an AFU error, which would trigger an "Unhandled CXL PSL IRQ" warning. We do actually handle these type of errors (by notifying userspace), so add the missing return IRQ_HANDLED so we don't throw unecessary warnings. Signed-off-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Ryan Grimm authored
commit 6f963ec2 upstream. When unbinding and rebinding the driver on a system with a card in PHB0, this error condition is reached after a few attempts: ERROR: Bad of_node_put() on /pciex@3fffe40000000 CPU: 0 PID: 3040 Comm: bash Not tainted 3.18.0-rc3-12545-g3627ffe #152 Call Trace: [c000000721acb5c0] [c00000000086ef94] .dump_stack+0x84/0xb0 (unreliable) [c000000721acb640] [c00000000073a0a8] .of_node_release+0xd8/0xe0 [c000000721acb6d0] [c00000000044bc44] .kobject_release+0x74/0xe0 [c000000721acb760] [c0000000007394fc] .of_node_put+0x1c/0x30 [c000000721acb7d0] [c000000000545cd8] .cxl_probe+0x1a98/0x1d50 [c000000721acb900] [c0000000004845a0] .local_pci_probe+0x40/0xc0 [c000000721acb980] [c000000000484998] .pci_device_probe+0x128/0x170 [c000000721acba30] [c00000000052400c] .driver_probe_device+0xac/0x2a0 [c000000721acbad0] [c000000000522468] .bind_store+0x108/0x160 [c000000721acbb70] [c000000000521448] .drv_attr_store+0x38/0x60 [c000000721acbbe0] [c000000000293840] .sysfs_kf_write+0x60/0xa0 [c000000721acbc50] [c000000000292500] .kernfs_fop_write+0x140/0x1d0 [c000000721acbcf0] [c000000000208648] .vfs_write+0xd8/0x260 [c000000721acbd90] [c000000000208b18] .SyS_write+0x58/0x100 [c000000721acbe30] [c000000000009258] syscall_exit+0x0/0x98 We are missing a call to of_node_get(). pnv_pci_to_phb_node() should call of_node_get() otherwise np's reference count isn't incremented and it might go away. Rename pnv_pci_to_phb_node() to pnv_pci_get_phb_node() so it's clear it calls of_node_get(). Signed-off-by:
Ryan Grimm <grimm@linux.vnet.ibm.com> Acked-by:
-
Ryan Grimm authored
commit 4beb5421 upstream. Select defaults such that a PERST causes flash image reload. Select which image based on what the card is set up to load. CXL_VSEC_PERST_LOADS_IMAGE selects whether PERST assertion causes flash image load. CXL_VSEC_PERST_SELECT_USER selects which image is loaded on the next PERST. cxl_update_image_control writes these bits into the VSEC. Signed-off-by:
-
