- Convert pci-host-common.c platform .remove() callback to .remove_new()
  returning 'void' since it's not useful to return error codes here (Uwe
  Kleine-König)

- Log a message about updating AMD USB controller class code (so dwc3, not
  xhci, claims it) only when we actually change it (Guilherme G.  Piccoli)

- Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI lpfc
  (Ilpo Järvinen)

- Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)

- Fix 64GT/s effective data rate calculation to use 1b/1b encoding rather
  than the 8b/10b or 128b/130b used by lower rates (Ilpo Järvinen)

* pci/enumeration:
  PCI: Fix 64GT/s effective data rate calculation
  x86/pci: Clean up open-coded PCIBIOS return code mangling
  scsi: lpfc: Use PCI_HEADER_TYPE_MFD instead of literal
  powerpc/fsl-pci: Use PCI_HEADER_TYPE_MASK instead of literal
  x86/pci: Use PCI_HEADER_TYPE_* instead of literals
  PCI: Only override AMD USB controller if required
  PCI: host-generic: Convert to platform remove callback returning void

- Reserve ECAM if BIOS didn't include it in PNP0C02 _CRS (Bjorn Helgaas)

- Add MMCONFIG/ECAM debug logging (Bjorn Helgaas)

- Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas)

* pci/ecam:
  x86/pci: Reorder pci_mmcfg_arch_map() definition before calls
  x86/pci: Return pci_mmconfig_add() failure early
  x86/pci: Comment pci_mmconfig_insert() obscure MCFG dependency
  x86/pci: Rename pci_mmcfg_check_reserved() to pci_mmcfg_reserved()
  x86/pci: Rename acpi_mcfg_check_entry() to acpi_mcfg_valid_entry()
  x86/pci: Rename 'MMCONFIG' to 'ECAM', use pr_fmt
  x86/pci: Add MCFG debug logging
  x86/pci: Reword ECAM EfiMemoryMappedIO logging to avoid 'reserved'
  x86/pci: Reserve ECAM if BIOS didn't include it in PNP0C02 _CRS

- Log AER errors as "Correctable" (not "Corrected") or "Uncorrectable" to
  match spec terminology (Bjorn Helgaas)

- Decode Requester ID when no error info found instead of printing the raw
  hex value (Bjorn Helgaas)

* pci/aer:
  PCI/AER: Use explicit register sizes for struct members
  PCI/AER: Decode Requester ID when no error info found
  PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors

aer_irq() reads the AER Root Error Status and Error Source Identification
(PCI_ERR_ROOT_STATUS and PCI_ERR_ROOT_ERR_SRC) registers directly into
struct aer_err_source.  Both registers are 32 bits, so declare the members
explicitly as "u32" instead of "unsigned int".

Similarly, aer_get_device_error_info() reads the AER Header Log
(PCI_ERR_HEADER_LOG) registers, which are also 32 bits, into struct
aer_header_log_regs.  Declare those members as "u32" as well.

No functional changes intended.

Link: https://lore.kernel.org/r/20231206224231.732765-4-helgaas@kernel.orgSigned-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

When a device with AER detects an error, it logs error information in its
own AER Error Status registers.  It may send an Error Message to the Root
Port (RCEC in the case of an RCiEP), which logs the fact that an Error
Message was received (Root Error Status) and the Requester ID of the
message source (Error Source Identification).

aer_print_port_info() prints the Requester ID from the Root Port Error
Source in the usual Linux "bb:dd.f" format, but when find_source_device()
finds no error details in the hierarchy below the Root Port, it printed the
raw Requester ID without decoding it.

Decode the Requester ID in the usual Linux format so it matches other
messages.

Sample message changes:

  - pcieport 0000:00:1c.5: AER: Correctable error received: 0000:00:1c.5
  - pcieport 0000:00:1c.5: AER: can't find device of ID00e5
  + pcieport 0000:00:1c.5: AER: Correctable error message received from 0000:00:1c.5
  + pcieport 0000:00:1c.5: AER: found no error details for 0000:00:1c.5

Link: https://lore.kernel.org/r/20231206224231.732765-3-helgaas@kernel.orgSigned-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

The PCIe spec classifies errors as either "Correctable" or "Uncorrectable".
Previously we printed these as "Corrected" or "Uncorrected".  To avoid
confusion, use the same terms as the spec.

One confusing situation is when one agent detects an error, but another
agent is responsible for recovery, e.g., by re-attempting the operation.
The first agent may log a "correctable" error but it has not yet been
corrected.  The recovery agent must report an uncorrectable error if it is
unable to recover.  If we print the first agent's error as "Corrected", it
gives the false impression that it has already been resolved.

Sample message change:

  - pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
  + pcieport 0000:00:1c.5: AER: Correctable error received: 0000:00:1c.5

Link: https://lore.kernel.org/r/20231206224231.732765-2-helgaas@kernel.orgSigned-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

Unlike the lower rates, the PCIe 64GT/s Data Rate uses 1b/1b encoding, not
128b/130b (PCIe r6.1 sec 1.2, Table 1-1).  Correct the PCIE_SPEED2MBS_ENC()
calculation to reflect that.

Link: https://lore.kernel.org/r/20240102172701.65501-1-ilpo.jarvinen@linux.intel.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

The typical style is to define functions before calling them.  Move
pci_mmcfg_arch_map() and pci_mmcfg_arch_unmap() earlier so they're defined
before they're called.  No functional change intended.

Link: https://lore.kernel.org/r/20231121183643.249006-10-helgaas@kernel.orgTested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

If pci_mmconfig_alloc() fails, return the failure early so it's obvious
that the failure is the exception, and the success is the normal case.  No
functional change intended.

Link: https://lore.kernel.org/r/20231121183643.249006-9-helgaas@kernel.orgTested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

In pci_mmconfig_insert(), there's no reference to "addr" between locking
pci_mmcfg_lock and testing "addr", so it *looks* like we should move the
test before the lock.

But 07f9b61c ("x86/PCI: MMCONFIG: Check earlier for MMCONFIG region at
address zero") did that, which broke things by returning -EINVAL when
"addr" is zero instead of -EEXIST.

So 07f9b61c was reverted by 67d470e0 ("Revert "x86/PCI: MMCONFIG:
Check earlier for MMCONFIG region at address zero"").

Add a comment about this issue to prevent it from happening again.

Link: https://lore.kernel.org/r/20231121183643.249006-8-helgaas@kernel.orgTested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

"pci_mmcfg_check_reserved()" doesn't give a hint about what the boolean
return value means.  Rename it to pci_mmcfg_reserved() so testing
"if (pci_mmcfg_reserved())" makes sense.

Update callers to treat the return value as boolean instead of comparing
with 0.

Link: https://lore.kernel.org/r/20231121183643.249006-7-helgaas@kernel.orgTested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

"acpi_mcfg_check_entry()" doesn't give a hint about what the return value
means.  Rename it to "acpi_mcfg_valid_entry()", convert the return value to
bool, and update the return values and callers to match so testing
"if (acpi_mcfg_valid_entry())" makes sense.

Link: https://lore.kernel.org/r/20231121183643.249006-6-helgaas@kernel.orgTested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

The "MMCONFIG" term is not used in PCI/PCIe specs.  Replace it with "ECAM",
the term used in PCIe r6.0, sec 7.2.2.

Define pr_fmt() instead of repeating PREFIX in every log message.

Link: https://lore.kernel.org/r/20231121183643.249006-5-helgaas@kernel.orgTested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

MCFG handling is a frequent source of problems.  Add more logging to aid in
debugging.

Enable the logging with CONFIG_DYNAMIC_DEBUG=y and the kernel boot
parameter 'dyndbg="file arch/x86/pci +p"'.

Link: https://lore.kernel.org/r/20231121183643.249006-4-helgaas@kernel.orgTested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

fd3a8cff ("x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM
space") added the concept of using the EFI memory map to help decide
whether ECAM space mentioned in the MCFG table is valid.

Unfortunately it described that EfiMemoryMappedIO space as "reserved", but
it is actually not *reserved* by the EFI memory map.  EfiMemoryMappedIO
only means the firmware requested that the OS map this space for use by
firmware runtime services.

Change the dmesg logging to describe it as simply "EfiMemoryMappedIO", not
as "reserved as EfiMemoryMappedIO".  A previous commit actually *does*
reserve the space if ACPI PNP0C01/02 devices haven't done so:

  - PCI: ECAM at [mem 0xe0000000-0xefffffff] reserved as EfiMemoryMappedIO
  + PCI: ECAM at [mem 0xe0000000-0xefffffff] is EfiMemoryMappedIO; assuming valid
    PCI: ECAM [mem 0xe0000000-0xefffffff] reserved to work around lack of ACPI motherboard _CRS

Link: https://lore.kernel.org/r/20231121183643.249006-3-helgaas@kernel.orgTested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Tomasz, Sebastian, and some Proxmox users reported problems initializing
ixgbe NICs.

I think the problem is that ECAM space described in the ACPI MCFG table is
not reserved via a PNP0C02 _CRS method as required by the PCI Firmware spec
(r3.3, sec 4.1.2), but it *is* included in the PNP0A03 host bridge _CRS as
part of the MMIO aperture.

If we allocate space for a PCI BAR, we're likely to allocate it from that
ECAM space, which obviously cannot work.

This could happen for any device, but in the ixgbe case it happens because
it's an SR-IOV device and the BIOS didn't allocate space for the VF BARs,
so Linux reallocated the bridge window leading to ixgbe and put it on top
of the ECAM space.  From Tomasz' system:

  PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
  PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] not reserved in ACPI motherboard resources
  pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window]

  pci 0000:00:01.1: PCI bridge to [bus 02-03]
  pci 0000:00:01.1:   bridge window [mem 0xfb900000-0xfbbfffff]
  pci 0000:02:00.0: [8086:10fb] type 00 class 0x020000  # ixgbe
  pci 0000:02:00.0: reg 0x10: [mem 0xfba80000-0xfbafffff 64bit]
  pci 0000:02:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs)
  pci 0000:02:00.0: BAR 7: no space for [mem size 0x00100000 64bit]   # VF BAR 0

  pci_bus 0000:00: No. 2 try to assign unassigned res
  pci 0000:00:01.1: resource 14 [mem 0xfb900000-0xfbbfffff] released
  pci 0000:00:01.1: BAR 14: assigned [mem 0x80000000-0x806fffff]
  pci 0000:02:00.0: BAR 0: assigned [mem 0x80000000-0x8007ffff 64bit]
  pci 0000:02:00.0: BAR 7: assigned [mem 0x80204000-0x80303fff 64bit] # VF BAR 0

Fixes: 07eab090 ("efi/x86: Remove EfiMemoryMappedIO from E820 map")
Fixes: fd3a8cff ("x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM space")
Reported-by: Tomasz Pala <gotar@polanet.pl>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218050Reported-by: Sebastian Manciulea <manciuleas@protonmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218107
Link: https://forum.proxmox.com/threads/proxmox-8-kernel-6-2-16-4-pve-ixgbe-driver-fails-to-load-due-to-pci-device-probing-failure.131203/
Link: https://lore.kernel.org/r/20231121183643.249006-2-helgaas@kernel.orgTested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org	# v6.2+

Per PCI Firmware spec r3.3, sec 2.5.2, 2.6.2, and 2.7, the return code for
these PCI BIOS interfaces is in 8 bits of the EAX register.  Previously it
was extracted by open-coded masks and shifting.

Name the return code bits with a #define and add pcibios_get_return_code()
to extract the return code to improve code readability. In addition,
replace zero test with PCIBIOS_SUCCESSFUL.

No functional changes intended.

Link: https://lore.kernel.org/r/20231124085924.13830-1-ilpo.jarvinen@linux.intel.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Replace literal 0x80 with PCI_HEADER_TYPE_MFD.

Link: https://lore.kernel.org/r/20231124090919.23687-4-ilpo.jarvinen@linux.intel.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Replace 0x7f literals with PCI_HEADER_TYPE_MASK.

Link: https://lore.kernel.org/r/20231124090919.23687-2-ilpo.jarvinen@linux.intel.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Replace 0x7f and 0x80 literals with PCI_HEADER_TYPE_* defines.

Link: https://lore.kernel.org/r/20231124090919.23687-1-ilpo.jarvinen@linux.intel.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

By running a Van Gogh device (Steam Deck), the following message
was noticed in the kernel log:

  pci 0000:04:00.3: PCI class overridden (0x0c03fe -> 0x0c03fe) so dwc3 driver can claim this instead of xhci

Effectively this means the quirk executed but changed nothing, since the
class of this device was already the proper one (likely adjusted by newer
firmware versions).

Check and perform the override only if necessary.

Link: https://lore.kernel.org/r/20231120160531.361552-1-gpiccoli@igalia.comSigned-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Vicki Pfau <vi@endrift.com>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code.  However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

pci_host_common_remove() returned zero unconditionally. With that converted
to return void instead, the generic pci host driver can be switched to
.remove_new() trivially.

Link: https://lore.kernel.org/r/20231020092107.2148311-1-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Will Deacon <will@kernel.org>

The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))

Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/
Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/
Fixes: b6e3d1ba ("wifi: iwlwifi: mvm: implement new firmware API for statistics")
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc architecture fixes from Helge Deller:

 - Include the upper 5 address bits when inserting TLB entries on a
   64-bit kernel.

   On physical machines those are ignored, but in qemu it's nice to have
   them included and to be correct.

 - Stop the 64-bit kernel and show a warning if someone tries to boot on
   a machine with a 32-bit CPU

 - Fix a "no previous prototype" warning in parport-gsc

* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Prevent booting 64-bit kernels on PA1.x machines
  parport: gsc: mark init function static
  parisc/pgtable: Do not drop upper 5 address bits of physical address

Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - support PREEMPT_DYNAMIC with static keys

 - relax memory ordering for atomic operations

 - support BPF CPU v4 instructions for LoongArch

 - some build and runtime warning fixes

* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  selftests/bpf: Enable cpu v4 tests for LoongArch
  LoongArch: BPF: Support signed mod instructions
  LoongArch: BPF: Support signed div instructions
  LoongArch: BPF: Support 32-bit offset jmp instructions
  LoongArch: BPF: Support unconditional bswap instructions
  LoongArch: BPF: Support sign-extension mov instructions
  LoongArch: BPF: Support sign-extension load instructions
  LoongArch: Add more instruction opcodes and emit_* helpers
  LoongArch/smp: Call rcutree_report_cpu_starting() earlier
  LoongArch: Relax memory ordering for atomic operations
  LoongArch: Mark __percpu functions as always inline
  LoongArch: Disable module from accessing external data directly
  LoongArch: Support PREEMPT_DYNAMIC with static keys

Pull powerpc fixes from Michael Ellerman:

 - Finish a refactor of pgprot_framebuffer() which dependend
   on some changes that were merged via the drm tree

 - Fix some kernel-doc warnings to quieten the bots

Thanks to Nathan Lynch and Thomas Zimmermann.

* tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc
  powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc
  powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code
  powerpc: Remove file parameter from phys_mem_access_prot()
  powerpc/machdep: Remove trailing whitespaces

Pull smb client fixes from Steve French:

 - ctime caching fix (for setxattr)

 - encryption fix

 - DNS resolver mount fix

 - debugging improvements

 - multichannel fixes including cases where server stops or starts
   supporting multichannel after mount

 - reconnect fix

 - minor cleanups

* tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko
  cifs: handle when server stops supporting multichannel
  cifs: handle when server starts supporting multichannel
  Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
  smb3: allow dumping session and tcon id to improve stats analysis and debugging
  smb: client: fix mount when dns_resolver key is not available
  smb3: fix caching of ctime on setxattr
  smb3: minor cleanup of session handling code
  cifs: reconnect work should have reference on server struct
  cifs: do not pass cifs_sb when trying to add channels
  cifs: account for primary channel in the interface list
  cifs: distribute channels across interfaces based on speed
  cifs: handle cases where a channel is closed
  smb3: more minor cleanups for session handling routines
  smb3: minor RDMA cleanup
  cifs: Fix encryption of cleared, but unset rq_iter data buffers

Merge tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probes fixes from Masami Hiramatsu:

 - Documentation update: Add a note about argument and return value
   fetching is the best effort because it depends on the type.

 - objpool: Fix to make internal global variables static in
   test_objpool.c.

 - kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
   same prototypes in asm/kprobes.h for some architectures, but some of
   them are missing the prototype and it causes a warning. So move the
   prototype into linux/kprobes.h.

 - tracing: Fix to check the tracepoint event and return event at
   parsing stage. The tracepoint event doesn't support %return but if
   $retval exists, it will be converted to %return silently. This finds
   that case and rejects it.

 - tracing: Fix the order of the descriptions about the parameters of
   __kprobe_event_gen_cmd_start() to be consistent with the argument
   list of the function.

* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/kprobes: Fix the order of argument descriptions
  tracing: fprobe-event: Fix to check tracepoint event and return
  kprobes: unify kprobes_exceptions_nofify() prototypes
  lib: test_objpool: make global variables static
  Documentation: tracing: Add a note about argument and retval access

Pull fbdev fixes and cleanups from Helge Deller:

 - fix double free and resource leaks in imsttfb

 - lots of remove callback cleanups and section mismatch fixes in
   omapfb, amifb and atmel_lcdfb

 - error code fix and memparse simplification in omapfb

* tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits)
  fbdev: fsl-diu-fb: mark wr_reg_wa() static
  fbdev: amifb: Convert to platform remove callback returning void
  fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning
  fbdev: hyperv_fb: fix uninitialized local variable use
  fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void
  fbdev: omapfb/tfp410: Convert to platform remove callback returning void
  fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void
  fbdev: omapfb/opa362: Convert to platform remove callback returning void
  fbdev: omapfb/hdmi: Convert to platform remove callback returning void
  fbdev: omapfb/dvi: Convert to platform remove callback returning void
  fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void
  fbdev: omapfb/dpi: Convert to platform remove callback returning void
  fbdev: omapfb/analog-tv: Convert to platform remove callback returning void
  fbdev: atmel_lcdfb: Convert to platform remove callback returning void
  fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  ...

The order of descriptions should be consistent with the argument list of
the function, so "kretprobe" should be the second one.

int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe,
                                 const char *name, const char *loc, ...)

Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/

Fixes: 2a588dd1 ("tracing: Add kprobe event command generation functions")
Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Pull drm fixes from Daniel Vetter:
 "Dave's VPN to the big machine died, so it's on me to do fixes pr this
  and next week while everyone else is at plumbers.

   - big pile of amd fixes, but mostly for hw support newly added in 6.7

   - i915 fixes, mostly minor things

   - qxl memory leak fix

   - vc4 uaf fix in mock helpers

   - syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE"

* tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits)
  drm/amdgpu: fix error handling in amdgpu_vm_init
  drm/amdgpu: Fix possible null pointer dereference
  drm/amdgpu: move UVD and VCE sched entity init after sched init
  drm/amdgpu: move kfd_resume before the ip late init
  drm/amd: Explicitly check for GFXOFF to be enabled for s0ix
  drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2)
  drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5)
  drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support
  drm/amdgpu: fix software pci_unplug on some chips
  drm/amd/display: remove duplicated argument
  drm/amdgpu: correct mca debugfs dump reg list
  drm/amdgpu: correct acclerator check architecutre dump
  drm/amdgpu: add pcs xgmi v6.4.0 ras support
  drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3
  drm/amdgpu: disable smu v13.0.6 mca debug mode by default
  drm/amdgpu: Support multiple error query modes
  drm/amdgpu: refine smu v13.0.6 mca dump driver
  drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2)
  drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV
  drm: amd: Resolve Sphinx unexpected indentation warning
  ...

Pull arm64 fixes from Catalin Marinas:
 "Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
  MediaTek firmware:

   - Move the MediaTek GIC quirk handling from irqchip to core. Before
     the merging window commit 44bd78dd ("irqchip/gic-v3: Disable
     pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
     addressed this issue. Fixed now at a deeper level in the arch code

   - Reject events meant for other PMUs in the CoreSight PMU driver,
     otherwise some of the core PMU events would disappear

   - Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
     causing some events to be invisible

   - Remove duplicate declaration of __arm64_sys##name following the
     patch to avoid prototype warning for syscalls

   - Typos in the elf_hwcap documentation"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/syscall: Remove duplicate declaration
  Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
  arm64: Move MediaTek GIC quirk handling from irqchip to core
  arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
  perf: arm_cspmu: Reject events meant for other PMUs
  Documentation/arm64: Fix typos in elf_hwcaps

Pull sound fixes from Takashi Iwai:
 "A collection of fixes for rc1.

  The majority of changes are various ASoC driver-specific small fixes
  and usual HD-audio quirks, while there are a couple of core changes: a
  fix in ALSA core procfs code to avoid deadlocks at disconnection and
  an ASoC core fix for DAPM clock widgets"

* tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  OSS: dmasound/paula: Convert to platform remove callback returning void
  ALSA: hda: ASUS UM5302LA: Added quirks for cs35L41/10431A83 on i2c bus
  ALSA: info: Fix potential deadlock at disconnection
  ASoC: nau8540: Add self recovery to improve capture quility
  ALSA: hda/realtek: Add support dual speaker for Dell
  ALSA: hda: Add ASRock X670E Taichi to denylist
  ALSA: hda/realtek: Add quirk for ASUS UX7602ZM
  ASoC: SOF: sof-client: trivial: fix comment typo
  ASoC: dapm: fix clock get name
  ASoC: hdmi-codec: register hpd callback on component probe
  ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messages
  ASoC: da7219: Improve system suspend and resume handling
  ASoC: codecs: Modify macro value error
  ASoC: codecs: Modify the wrong judgment of re value
  ASoC: codecs: Modify the maximum value of calib
  ASoC: amd: acp: fix for i2s mode register field update
  ASoC: codecs: aw88399: Fix -Wuninitialized in aw_dev_set_vcalb()
  ASoC: rt712-sdca: fix speaker route missing issue
  ASoC: rockchip: Fix unused rockchip_i2s_tdm_match warning for !CONFIG_OF
  ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings

amd-drm-next-6.7-2023-11-10:

amdgpu:
- SR-IOV fixes
- DMCUB fixes
- DCN3.5 fixes
- DP2 fixes
- SubVP fixes
- SMU14 fixes
- SDMA4.x fixes
- Suspend/resume fixes
- AGP regression fix
- UAF fixes for some error cases
- SMU 13.0.6 fixes
- Documentation fixes
- RAS fixes
- Hotplug fixes
- Scheduling entity ordering fix
- GPUVM fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110190703.4741-1-alexander.deucher@amd.com

Pull spi fixes from Mark Brown:
 "A couple of fixes that came in during the merge window: one Kconfig
  dependency fix and another fix for a long standing issue where a sync
  transfer races with system suspend"

* tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: Fix null dereference on suspend
  spi: spi-zynq-qspi: add spi-mem to driver kconfig dependencies

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix broken cache-flush support for Micron eMMCs
   - Revert 'mmc: core: Capture correct oemid-bits for eMMC cards'

  MMC host:
   - sdhci_am654: Fix TAP value parsing for legacy speed mode
   - sdhci-pci-gli: Fix support for ASPM mode for GL9755/GL9750
   - vub300: Fix an error path in probe"

* tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER
  mmc: sdhci-pci-gli: GL9755: Mask the replay timer timeout of AER
  Revert "mmc: core: Capture correct oemid-bits for eMMC cards"
  mmc: vub300: fix an error code
  mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A
  mmc: sdhci_am654: fix start loop index for TAP value parsing

Merge tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm fixes from Thierry Reding:
 "This contains two very small fixes that I failed to include in the
  main pull request"

* tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: Fix double shift bug
  pwm: samsung: Fix a bit test in pwm_samsung_resume()

Pull io_uring fixes from Jens Axboe:
 "Mostly just a few fixes and cleanups caused by the read multishot
  support.

  Outside of that, a stable fix for how a connect retry is done"

* tag 'io_uring-6.7-2023-11-10' of git://git.kernel.dk/linux:
  io_uring: do not clamp read length for multishot read
  io_uring: do not allow multishot read to set addr or len
  io_uring: indicate if io_kbuf_recycle did recycle anything
  io_uring/rw: add separate prep handler for fixed read/write
  io_uring/rw: add separate prep handler for readv/writev
  io_uring/net: ensure socket is marked connected on connect retry
  io_uring/rw: don't attempt to allocate async data if opcode doesn't need it

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith:
      - nvme keyring config compile fixes (Hannes and Arnd)
      - fabrics keep alive fixes (Hannes)
      - tcp authentication fixes (Mark)
      - io_uring_cmd error handling fix (Anuj)
      - stale firmware attribute fix (Daniel)
      - tcp memory leak (Christophe)
      - crypto library usage simplification (Eric)

 - nbd use-after-free fix. May need a followup, but at least it's better
   than what it was before (Li)

 - Rate limit write on read-only device warnings (Yu)

* tag 'block-6.7-2023-11-10' of git://git.kernel.dk/linux:
  nvme: keyring: fix conditional compilation
  nvme: common: make keyring and auth separate modules
  blk-core: use pr_warn_ratelimited() in bio_check_ro()
  nbd: fix uaf in nbd_open
  nvme: start keep-alive after admin queue setup
  nvme-loop: always quiesce and cancel commands before destroying admin q
  nvme-tcp: avoid open-coding nvme_tcp_teardown_admin_queue()
  nvme-auth: always set valid seq_num in dhchap reply
  nvme-auth: add flag for bi-directional auth
  nvme-auth: auth success1 msg always includes resp
  nvme: fix error-handling for io_uring nvme-passthrough
  nvme: update firmware version after commit
  nvme-tcp: Fix a memory leak
  nvme-auth: use crypto_shash_tfm_digest()