- 12 Oct, 2007 22 commits
-
-
Matthew Wilcox authored
- Add a pci_driver interface for the PCI advansys devices (for ISA/EISA/VLB devices, we still call advansys_detect). - Many functions are converted from __init to __devinit to allow hotplug PCI to work. - Only keep devices found by advansys_detect in the asc_host list. - Rename asc_board_count to asc_legacy_count. New asc_board_count is only used to generate a unique name for each device. - Remove some now-unused macros and struct definitions Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
- Switch from scsi_register/scsi_unregister to scsi_host_alloc, scsi_add_host, scsi_scan_host and scsi_host_put. - Rename the scsi_host_template to advansys_template - Use module_init and module_exit instead of scsi_module.c - Remove protection against advansys_detect being called twice Signed-off-by:
-
Matthew Wilcox authored
- Put all the error cleanup at the end of the function and goto the appropriate label - Split advansys_wide_init_chip out of advansys_board_found - Split advansys_wide_free_mem out of advansys_board_found. Use it from advansys_release - Use GFP_KERNEL, not GFP_ATOMIC, when allocating memory during initialisation - Eliminate lots of PROC_FS ifdefs by removing the ifdefs around the prtbuf struct member Signed-off-by:
-
Matthew Wilcox authored
The interrupt routines used to walk the list of Scsi_Hosts belonging to this driver to make sure that the scsi_cmnd belonged to one of them. This is a waste of time and gets in the way of later cleanups, so delete it. Signed-off-by:
-
Matthew Wilcox authored
Pass the Scsi_Host to the interrupt handler, rather than polling all hosts for each interrupt. Return IRQ_NONE if we didn't handle this interrupt Don't set the IRQF_DISABLED flag; this is not a fast-executing interrupt handler. Signed-off-by:
-
Matthew Wilcox authored
Just use the Scsi_Host passed in, rather than looking through the driver's own array of boards for one that matches it. Signed-off-by:
-
Matthew Wilcox authored
Update the version to 3.4 Add my copyright Add myself to MAINTAINERS Exercise my right to change the license from dual BSD/GPL to GPL Don't force the definition of CONFIG_ISA on x86 Always include pci.h Stop including stat.h Signed-off-by:
-
FUJITA Tomonori authored
unsigned short is too small for sizeof(struct scatterlist) * min(q->max_hw_segments, q->max_phys_segments). This fixes memory leak with 4096 segments since 16 (likely sg size with x86) * 4096 sets sglist_len to zero. This might not happen without sg chaining support. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
Douglas Gilbert <dougg@torque.net> Signed-off-by:
-
Matthew Wilcox authored
Stress-testing and some thought has revealed some places where asynchronous scanning needs some more attention to locking. - Since async_scan is a bit, we need to hold the host_lock while modifying it to prevent races against other CPUs modifying the word that bit is in. This is probably a theoretical race for the moment, but other patches may change that. - The async_scan bit means not only that this host is being scanned asynchronously, but that all the devices attached to this host are not yet added to sysfs. So we must ensure that this bit is always in sync. I've chosen to do this with the scan_mutex since it's already acquired in most of the right places. - If the host changes state to deleted while we're in the middle of a scan, we'll end up with some devices on the host's list which must be deleted. Add a check to scsi_sysfs_add_devices() to ensure the host is still running. - To avoid the async_scan bit being protected by three locks, the async_scan_lock now only protects the scanning_list. Signed-off-by:
-
Boaz Harrosh authored
- use scsi_cmnd data accessors - Clean the !use_sg code paths Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> [jejb: merge conflict fix] Signed-off-by:
-
Mike Christie authored
sg's may have setup a the buffer with a different length than the transfer length so we should be using the bufflen passed in as the request's data len. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
FUJITA Tomonori authored
This converts ps3rom driver to use the new accessors for the sg lists and the parameters. Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by:
-
FUJITA Tomonori authored
it's better to remove tgt dependencies in srp transport class since most people want only initiator support. Signed-off-by:
-
FUJITA Tomonori authored
This converts ibmvstgt to use transport tsk_mgmt_response callback. Signed-off-by:
-
FUJITA Tomonori authored
This moves tsk_mgmt_response callback in struct scsi_host_template to struct scsi_transport_template since struct scsi_transport_template is more suitable for the task management stuff. Signed-off-by:
-
FUJITA Tomonori authored
This converts libsrp and ibmvstgt to use srp transport. Signed-off-by:
Brian King <brking@us.ibm.com> Signed-off-by:
-
FUJITA Tomonori authored
This adds minimum target driver support: - srp_rport_{add,del} calls scsi_tgt_it_nexus_{create,destroy} for target drivers. - add a callback to notify target drivers of the nexus operation results to srp_function_template. Signed-off-by: -
FUJITA Tomonori authored
tgt uses scsi_host as I_T nexus. This works for ibmvstgt because it creates one scsi_host for one initiator. However, other target drivers don't work like that. This adds I_T nexus support, which enable one scsi_host to handle multiple initiators. New scsi_tgt_it_nexus_create/destroy functions are expected be called transport classes. For example, ibmvstgt creates an initiator remote port, then the srp transport calls tgt_it_nexus_create. tgt doesn't manages I_T nexus, instead it tells tgtd, user-space daemon, to create a new I_T nexus. On the receiving the response from tgtd, tgt calls shost->transportt->it_nexus_response. transports should notify a lld. The srp transport uses it_nexus_response callback in srp_function_template to do that. Signed-off-by:
-
FUJITA Tomonori authored
This adds a 'roles' attribute to rport like transport_fc. The role can be initiator or target. That is, the initiator driver creates target remote ports and the target driver creates initiator remote ports. Signed-off-by:
-
FUJITA Tomonori authored
This converts ib_srp to use the srp transport class. I don't have ib hardware so I've not tested this patch. Signed-off-by:
-
FUJITA Tomonori authored
This converts ibmvscsi to use the srp transport class. Signed-off-by:
-
FUJITA Tomonori authored
This adds srp transport class that works with ib_srp and ibmvscsi. It creates only /sys/class/{srp_host,srp_remote_ports} and srp_remote_ports has only "port_id" attribute. viola:/sys/class/srp_remote_ports/port-0:1# ls device port_id subsystem uevent viola:/sys/class/srp_remote_ports/port-0:1# cat port_id 4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00 Signed-off-by:
-
- 15 Aug, 2007 9 commits
-
-
Andrew Vasquez authored
Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Original implementation manipulated the FC_GS values for port-speed. Transition the codes to use the driver's own internal representations as this makes for a reduction in duplicate 'conversion' codes throughout the driver. Signed-off-by:
-
Andrew Vasquez authored
Transitioning link-state via NOS/OLS requires a relogin to a fabric's Management Server. Request relogin when the firmware issues a point-to-point asynchronous event (0x8030). Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Heiko Carstens authored
Fix the data buffer accessor patch. For request without a data buffer nothing was written into a SBALE. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Swen Schillig <swen@vnet.ibm.com> Signed-off-by:
-
Heiko Carstens authored
allocate gid_pn_data objects from gid_pn_cache. Allocate gid_pn_data objects from the corresponding cache which ensures proper alignment. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
fix memory leak. Signed-off-by:
-
- 14 Aug, 2007 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixesLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: [GFS2] Revert remounting w/o acl option leaves acls enabled [GFS2] Fix setting of inherit jdata attr [GFS2] Fix incorrect error path in prepare_write() [GFS2] Fix incorrect return code in rgrp.c [GFS2] soft lockup in rgblk_search [GFS2] soft lockup detected in databuf_lo_before_commit [DLM] fix basts for granted PR waiting CW [DLM] More othercon fixes [DLM] Fix memory leak in dlm_add_member() when dlm_node_weight() returns less than zero [DLM] zero unused parts of sockaddr_storage [DLM] fix NULL ls usage [DLM] Clear othercon pointers when a connection is closed
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c-s3c2410: Build fix i2c/menelaus: Build fix i2c-mv64xxx: Reinitialize hw and driver on I2C bus hang i2c-mpc: Don't disable I2C module on stop condition i2c-iop3xx: Set I2C_CLASS_HWMON to adapter class i2c/isp1301_omap: Build fixes, whitespace i2c-mpc: Pass correct dev_id to free_irq on error path i2c-i801: Typo: erroneous
-
Ben Dooks authored
Fixup the include files after the arch moves that where included in 2.6.23. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
Jean Delvare <khali@linux-fr.org>
-
David Brownell authored
Fix Menelaus build error, and remove needless "#define DEBUG". Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Dale Farnsworth authored
Under certain conditions, the mv64xxx I2C bus can hang preventing further operation. To make the driver more robust, we now reset the I2C hardware and the driver state machine when such hangs are detected. Signed-off-by:
Dale Farnsworth <dale@farnsworth.org> Acked-by:
Mark A. Greer <mgreer@mvista.com> Signed-off-by:
-
Domen Puncer authored
Disabling module on stop doesn't work on some CPUs (ie. mpc8241, as reported by Guennadi Liakhovetski), so remove that. Disable I2C module on errors/interrupts to prevent it from locking up on mpc5200b. Signed-off-by:
Domen Puncer <domen.puncer@telargo.com> Acked-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Arnaud Patard authored
In order to be able to use sensors on the IOP3xx SoCs, one needs to set the adapter class to I2C_CLASS_HWMON. Signed-off-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by:
-
David Brownell authored
Build fixes for isp1301_omap driver. I think an earlier version of this must have gotten lost somewhere, or maybe it only went into the Linux-OMAP tree. Also, some whitespace fixes to bring this more into sync with the version of this found in the Linux-OMAP tree. (That version has updates for the OTG controller on the OMAP 1710 which break that functionality on OMAP 161x boards like the H2, so merging all of it is not currently an option.) Signed-off-by:
-
Scott Wood authored
Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
