In order to guarantee that a probe will be called before other probes that
are attached to a tracepoint, there needs to be a mechanism to provide
priority of one probe over the others.

Adding a prio field to the struct tracepoint_func, which lets the probes be
sorted by the priority set in the structure. If no priority is specified,
then a priority of 10 is given (this is a macro, and perhaps may be changed
in the future).

Now probes may be added to affect other probes that are attached to a
tracepoint with a guaranteed order.

One use case would be to allow tracing of tracepoints be able to filter by
pid. A special (higher priority probe) may be added to the sched_switch
tracepoint and set the necessary flags of the other tracepoints to notify
them if they should be traced or not. In case a tracepoint is enabled at the
sched_switch tracepoint too, the order of the two are not random.

Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Now, ftrace only calculate the dyn_ftrace number in the adding
breakpoint loop, not in adding update and finish update loop.

Calculate the correct dyn_ftrace, once ftrace reports the failure message
to the userspace.

Link: http://lkml.kernel.org/r/1442420382-13130-1-git-send-email-mnfhuang@gmail.comSigned-off-by: Minfei Huang <mnfhuang@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Both start_branch_trace() and stop_branch_trace() are used in only one
location, and are both static. As they are small functions there is no
need to keep them separated out.

Link: http://lkml.kernel.org/r/1445000689-32596-1-git-send-email-0x7f454c46@gmail.comSigned-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add a new options to trace Kconfig, CONFIG_TRACING_EVENTS_GPIO, that is
used for enabling/disabling compilation of gpio function trace events.

Link: http://lkml.kernel.org/r/1438432079-11704-4-git-send-email-tal.shorer@gmail.comAcked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tal Shorer <tal.shorer@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Allow a trace events header file to disable compilation of its
trace events by defining the preprocessor macro NOTRACE.

This could be done, for example, according to a Kconfig option.

Link: http://lkml.kernel.org/r/1438432079-11704-3-git-send-email-tal.shorer@gmail.comSigned-off-by: Tal Shorer <tal.shorer@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Link: http://lkml.kernel.org/r/1443545176-3215-5-git-send-email-0x7f454c46@gmail.comSigned-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Extend module command for function filter selection with globbing.
It uses the same globbing as function filter.

  sh# echo '*alloc*:mod:*' > set_ftrace_filter

Will trace any function with the letters 'alloc' in the name in any
module but not in kernel.

  sh# echo '!*alloc*:mod:ipv6' >> set_ftrace_filter

Will prevent from tracing functions with 'alloc' in the name from module
ipv6 (do not forget to append to set_ftrace_filter file).

  sh# echo '*alloc*:mod:!ipv6' > set_ftrace_filter

Will trace functions with 'alloc' in the name from kernel and any
module except ipv6.

  sh# echo '*alloc*:mod:!*' > set_ftrace_filter

Will trace any function with the letters 'alloc' in the name only from
kernel, but not from any module.

  sh# echo '*:mod:!*' > set_ftrace_filter
or
  sh# echo ':mod:!' > set_ftrace_filter

Will trace every function in the kernel, but will not trace functions
from any module.

  sh# echo '*:mod:*' > set_ftrace_filter
or
  sh# echo ':mod:' > set_ftrace_filter

As the opposite will trace all functions from all modules, but not from
kernel.

  sh# echo '*:mod:*snd*' > set_ftrace_filter

Will trace your sound drivers only (if any).

Link: http://lkml.kernel.org/r/1443545176-3215-4-git-send-email-0x7f454c46@gmail.comSigned-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
[ Made format changes ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

ftrace_match parameters are very related and I reduce the number of local
variables & parameters with it.
This is also preparation for module globbing as it would introduce more
realated variables & parameters.

Link: http://lkml.kernel.org/r/1443545176-3215-3-git-send-email-0x7f454c46@gmail.comSigned-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
[ Made some formatting changes ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

"Not" is too abstract variable name - changed to clear_filter.
Removed ftrace_match_module_records function: comparison with !* or *
not does the general code in filter_parse_regex() as it works without
mod command for
  sh# echo '!*' > /sys/kernel/debug/tracing/set_ftrace_filter

Link: http://lkml.kernel.org/r/1443545176-3215-2-git-send-email-0x7f454c46@gmail.comSigned-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

By now there isn't any subcommand for mod.

Before:
	sh$ echo '*:mod:ipv6:a' > set_ftrace_filter
	sh$ echo '*:mod:ipv6' > set_ftrace_filter
had the same results, but now first will result in:
	sh$ echo '*:mod:ipv6:a' > set_ftrace_filter
	-bash: echo: write error: Invalid argument

Also, I clarified ftrace_mod_callback code a little.

Link: http://lkml.kernel.org/r/1443545176-3215-1-git-send-email-0x7f454c46@gmail.comSigned-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
[ converted 'if (ret == 0)' to 'if (!ret)' ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

To cover the common case of sorting an array of pointers, Daniel
Wagner recently modified the library sort() to use a specific swap
function for size==8, in addition to the size==4 case which was
already handled. Since sizeof(long) is either 4 or 8,
ftrace_swap_ips() is redundant and we can just let sort() pick an
appropriate and fast swap callback.

Link: http://lkml.kernel.org/r/1441834023-13130-1-git-send-email-linux@rasmusvillemoes.dkSigned-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The kernel now has kstrdup_const/kfree_const for reusing .rodata
(typically string literals) when possible; there's no reason to
duplicate that logic in the tracing system. Moreover, as the comment
above core_kernel_data states, it may not always return true for
.rodata - that is for example the case on x86_64, where we thus end up
kstrdup'ing all the passed-in strings.

Arguably, testing for .rodata explicitly (as kstrdup_const does) is
also more correct: I don't think one is supposed to be able to change
the name after creating the event_subsystem by passing the address of
a static char (but non-const) array.

Link: http://lkml.kernel.org/r/1441833841-12955-1-git-send-email-linux@rasmusvillemoes.dkSigned-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add the tracer options to instances options directory as well. Only add the
options for tracers that are allowed to be enabled by an instance. But note,
that tracer options are global. That is, tracer options enabled in an
instance, also take affect at the top level and in other instances.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Allow instances to have their own options, at least for the core options
(non tracer specific ones). There are a few global options that should not
be added to instances, like enabling of trace_printk, and the sched comm
recording, which do not have a specific trace instance associated to them.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

In preparation for the multi buffer instances to have their own trace_flags,
the check in ftrace_trace_stack() needs to test the trace_array descriptor
flag that is for the current event, not the global_trace descriptor.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

In preparation of having the multi buffer instances having their own trace
option flags, the trace option files needs a way to not only pass in the
flag they represent, but also the trace_array descriptor.

A new field is added to the trace_array descriptor called trace_flags_index,
which is a 32 byte character array representing a bit. This array is simply
filled with the index of the array, where

  index_array[n] = n;

Then the address of this array is passed to the file callbacks instead of
the index of the flag index. Then to retrieve both the flag index and the
trace_array descriptor:

  data is the passed in argument.

  index = *(unsigned char *)data;

  data -= index;

  /* Now data points to the address of the array in the trace_array */

  tr = container_of(data, struct trace_array, trace_flags_index);
Suggested-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

In preparation to make trace options per instance, the global trace_flags
needs to be moved from being a global variable to a field within the trace
instance trace_array structure.

There's still more work to do, as there's some functions that use
trace_flags without passing in a way to get to the current_trace array. For
those, the global_trace is used directly (from trace.c). This includes
setting and clearing the trace_flags. This means that when a new instance is
created, it just gets the trace_flags of the global_trace and will not be
able to modify them. Depending on the functions that have access to the
trace_array, the flags of an instance may not affect parts of its trace,
where the global_trace is used. These will be fixed in future changes.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The sleep-time and graph-time options are only for the function graph tracer
and are not used by anything else. As tracer options are now visible when
the tracer is not activated, its better to move the function graph specific
tracer options into the function graph tracer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

In the effort to move the global trace_flags to the tracing instances, the
direct access to trace_flags must be removed from trace_printk.c

Instead, add a new trace_printk_enabled boolean that is set by a new access
function trace_printk_control(), that will enable or disable trace_printk.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add a enum that denotes the last bit of the trace_flags and have a
BUILD_BUG_ON(last_bit > 32).

If we add more bits than we have in trace_flags, the kernel wont build.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

There are options that are unique to a specific tracer (like function and
function graph). Currently, these options are only visible in the options
directory when the tracer is enabled.

This has been a pain, especially for something like the func_stack_trace
option that if used inappropriately, could bring the system to a crawl. But
the only way to see it, is to enable the function tracer.

For example, if one had done:

 # cd /sys/kernel/tracing
 # echo __schedule > set_ftrace_filter
 # echo 1 > options/func_stack_trace
 # echo function > current_tracer

The __schedule call will be traced and a stack trace will also be recorded
there. Now when you were done, you may do...

 # echo nop > current_tracer
 # echo > set_ftrace_filter

But you forgot to disable the func_stack_trace. The only way to disable it
is to re-enable function tracing first. If you do not add a filter to
set_ftrace_filter and just do:

 # echo function > current_tracer

Now you would be performing a stack trace on *every* function! On some
systems, that causes a live lock. Others may take a few minutes to fix your
mistake.

Having the func_stack_trace option visible allows you to check it and
disable it before enabling the funtion tracer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Only create the stacktrace trace option when CONFIG_STACKTRACE is
configured.

Cleaned up the ftrace_trace_stack() function call a little to allow better
encapsulation of the stacktrace trace flag.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

When the function tracer is not compiled in, do not create the option files
for it.

Fix up both the sched_wakeup and irqsoff tracers to handle the change.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

When the branch tracer is not compiled in, do not create the option files
associated to it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Do not create fuction graph tracer options when function graph tracer is not
even compiled in.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Use a cute little macro trick to keep the names of the trace flags file
guaranteed to match the corresponding masks.

The macro TRACE_FLAGS is defined as a serious of enum names followed by
the string name of the file that matches it. For example:

 #define TRACE_FLAGS						\
		C(PRINT_PARENT,		"print-parent"),	\
		C(SYM_OFFSET,		"sym-offset"),		\
		C(SYM_ADDR,		"sym-addr"),		\
		C(VERBOSE,		"verbose"),

Now we can define the following:

 #undef C
 #define C(a, b) TRACE_ITER_##a##_BIT
 enum trace_iterator_bits { TRACE_FLAGS };

The above creates:

 enum trace_iterator_bits {
	TRACE_ITER_PRINT_PARENT_BIT,
	TRACE_ITER_SYM_OFFSET_BIT,
	TRACE_ITER_SYM_ADDR_BIT,
	TRACE_ITER_VERBOSE_BIT,
 };

Then we can redefine C as:

 #undef C
 #define C(a, b) TRACE_ITER_##a = (1 << TRACE_ITER_##a##_BIT)
 enum trace_iterator_flags { TRACE_FLAGS };

Which creates:

 enum trace_iterator_flags {
	TRACE_ITER_PRINT_PARENT	= (1 << TRACE_ITER_PRINT_PARENT_BIT),
	TRACE_ITER_SYM_OFFSET	= (1 << TRACE_ITER_SYM_OFFSET_BIT),
	TRACE_ITER_SYM_ADDR	= (1 << TRACE_ITER_SYM_ADDR_BIT),
	TRACE_ITER_VERBOSE	= (1 << TRACE_ITER_VERBOSE_BIT),
 };

Then finally we can create the list of file names:

 #undef C
 #define C(a, b) b
 static const char *trace_options[] = {
	TRACE_FLAGS
	NULL
 };

Which creates:
 static const char *trace_options[] = {
	"print-parent",
	"sym-offset",
	"sym-addr",
	"verbose",
	NULL
 };

The importance of this is that the strings match the bit index.

	trace_options[TRACE_ITER_SYM_ADDR_BIT] == "sym-addr"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Using enums with FLAG_BIT and then defining a FLAG = (1 << FLAG_BIT), is a
bit more robust as we require that there are no bits out of order or skipped
to match the file names that represent the bits.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

There was a time where the function tracing would disable interrupts unless
specifically told not to, where it would only disable preemption. With the
new lockless code, the function tracing never disalbes interrupts and just
uses disabling of preemption. Remove the option "ftrace_preempt" as it does
nothing anyway.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

In order to facilitate making all tracer options visible even when the
tracer is not active, we need to get rid of duplicate options. Any option
that is shared between multiple tracers really should be a main option.

As the wakeup and irqsoff tracers both use the "display-graph" option, and
use it exactly the same way, move that option from the tracer options to the
main options and consolidate them.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

seq_print_user_ip() is used in only one location in one file. Turn it into a
static function. We could inject its code into the caller, but that would
make the code a bit too complex. Keep the code separate.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

seq_print_userip_objs() is used only in one location, in one file. Instead
of having it as an external function, go one further than making it static,
but inject is code into its only user. It doesn't make the calling function
much more complex.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

ftrace_trace_stack() is not called outside of trace.c. Make it a static
function.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

In preparation for having trace options be per instance, the trace_array
needs to be passed to the trace_buffer_unlock_commit(). The
trace_event_buffer_lock_reserve() already passes in the trace_event_file
where the trace_array can be derived from.

Also added a "__init" to the boot up test event plus function tracing
function function_test_events_call().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

trace_current_buffer_lock_reserve() is not used by anything. Might as well
get rid of it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

ftrace_trace_stack_regs() is used in only one place, and because that is
such a simple function, just move its code into the location that it was
used in (trace_buffer_unlock_commit_regs()).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Commit ee53bbd1 "tracing: Move the perf code out of trace_event.h" moved
more than just the perf code out of trace_event.h, but also removed a bit of
the tracing code too. Move it back.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

This patch makes is_good_name return bool to improve readability
due to this particular function only using either one or zero as its
return value.

No functional change.

Link: http://lkml.kernel.org/r/1442929393-4753-2-git-send-email-bywxiaobai@163.comSigned-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Pull ARM fixes from Russell King:
 "Three fixes and a resulting cleanup for -rc2:

   - Andre Przywara reported that he was seeing a warning with the new
     cast inside DMA_ERROR_CODE's definition, and fixed the incorrect
     use.

   - Doug Anderson noticed that kgdb causes a "scheduling while atomic"
     bug.

   - OMAP5 folk noticed that their Thumb-2 compiled X servers crashed
     when enabling support to cover ARMv6 CPUs due to a kernel bug
     leaking some conditional context into the signal handler"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8425/1: kgdb: Don't try to stop the machine when setting breakpoints
  ARM: 8437/1: dma-mapping: fix build warning with new DMA_ERROR_CODE definition
  ARM: get rid of needless #if in signal handling code
  ARM: fix Thumb2 signal handling when ARMv6 is enabled

Merge tag 'linux-kselftest-4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "This update contains 7 fixes for problems ranging from build failurs
  to incorrect error reporting"

* tag 'linux-kselftest-4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: exec: revert to default emit rule
  selftests: change install command to rsync
  selftests: mqueue: simplify the Makefile
  selftests: mqueue: allow extra cflags
  selftests: rename jump label to static_keys
  selftests/seccomp: add support for s390
  seltests/zram: fix syntax error