- 26 Jan, 2008 40 commits
-
-
Bartlomiej Zolnierkiewicz authored
* Move setting hwif->gendev.parent from ide_pci_setup_ports() to ide_hwif_configure(). * Always set hwif->io_ports in ide_hwif_configure(). * Use ide_init_port_hw() in ide_hwif_configure(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* ide_init_hwif_ports() call in setup-pci.c::ide_hwif_configure() doesn't depend on the default cotrol register offset, default IRQ or ppc_ide_md.ide_init_hwif implementations so ide_std_init_ports() can always be used. * Since 'base' is always non-zero and thus hwif->io_ports[IDE_DATA_OFFSET] is also non-zero always clear hwif->noprobe. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* hwif->hold is always set in au_ide_probe() (few lines earlier), no need to set it again * hwif->{channel,select_data,config_data} should be always zero * autotune PIO also if CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is defined Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Add mpc8xx_ide_probe() to mpc8xx.c and call it from probe_for_hwifs(). * Convert ide_arm, ide-cris, ide-h8300, ide-pnp, buddha, falconide, gayle, macide, q40ide, cmd640 and mpc8xx host drivers to use ide_device_add(). This removes dependency on ide_generic for these drivers so update ide/Kconfig accordingly. v2: * ide_arm build fix (s/ide_device_idx/ide_device_add/) (Thanks to Christoph Lameter <clameter@sgi.com> for reporting the problem). Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Make BLK_DEV_CMD640 select IDE_GENERIC. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Remove ide_init_port_data() call from ide_arm_init() and move ide_arm_init() call from init_ide_data() to ide_init(). This patch is a preparation for the future changes (and as a side-effect makes obsolete "idex=io[,ctl[,irq]]" kernel parameters work for ide_arm). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Rename init_hwif_data() to ide_init_port_data() and export it. * For all users of ide_register_hw() with 'initializing' argument set hwif->present and hwif->hold are always zero so convert these host drivers to use ide_find_port()+ide_init_port_data()+ide_init_port_hw() instead (also no need for init_hwif_default() call since the setup done by it gets over-ridden by ide_init_port_hw() call). * Drop 'initializing' argument from ide_register_hw(). Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Add ide_init_port_hw() helper. * rapide.c: convert rapide_locate_hwif() to rapide_setup_ports() and use ide_init_port_hw(). * ide_platform.c: convert plat_ide_locate_hwif() to plat_ide_setup_ports() and use ide_init_port_hw(). * sgiioc4.c: use ide_init_port_hw(). * pmac.c: add 'hw_regs_t *hw' argument to pmac_ide_setup_device(), setup 'hw' in pmac_ide_{macio,pci}_attach() and use ide_init_port_hw() in pmac_ide_setup_device(). This patch is a preparation for the future changes in the IDE probing code. There should be no functionality changes caused by this patch. Cc: Russell King <rmk@arm.linux.org.uk> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Jeremy Higdon <jeremy@sgi.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
'if (hwif->io_ports[IDE_DATA_OFFSET] != cmd_base)' is always true. Cc: Jeremy Higdon <jeremy@sgi.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Olof Johansson authored
Fix build break of powerpc holly_defconfig: In file included from arch/powerpc/platforms/embedded6xx/holly.c:24: include/linux/ide.h:1206: error: 'CONFIG_IDE_MAX_HWIFS' undeclared here (not in a function) There's no need to have a sized array in the prototype, might as well turn it into a pointer. It could probably be argued that large parts of the include file can be covered under #ifdef CONFIG_IDE, but that's a larger undertaking. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Rename ide_device_add() to ide_device_add_all() and make it accept 'u8 idx[MAX_HWIFS]' instead of 'u8 idx[4]' as an argument. * Add ide_device_add() wrapper for ide_device_add_all(). * Convert ide_generic_init() to use ide_device_add_all(). * Remove no longer needed ideprobe_init(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Add hwif->chipset fixup identical to the one in ideprobe_init() to ide_device_add(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
hwif->chipset should be set if the hwif is claimed by host driver. Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
hwif->chipset should be set if the hwif is claimed by host driver. Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
After hwif_register_devices() IDE devices are ready to be used so the way in which ide_device_add() works currently is racy for hosts with serialized / IRQ sharing interfaces. Fix ide_device_add() by looping over interfaces for probe_hwif(), hwif_init() and hwif_register_devices() operations. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Host drivers using ide_register_hw() and 'initializing == 1': * ide-pnp - depends on ISA * ide_arm - ARM arch specific - initialized before all other host drivers * ide-cris - CRIS arch specific => IDE_ARCH_OBSOLETE_INIT is not defined - broken * ide-h8300 - H8300 arch specific => IDE_ARCH_OBSOLETE_INIT is not defined, no PCI * buddha/q40/gayle/macide/falconide - M68K arch specific => IDE_ARCH_OBSOLETE_INIT is not defined, no PCI Since the only host drivers which probe interfaces before the above ones are: * ali14xx/dtc2278/ht6560b/qd65xx/umc8672 - depend on ISA - require IDE_ARCH_OBSOLETE_INIT=y to work * PCI ones - depend on PCI don't try to unregister interfaces if 'initializing == 1' in ide_register_hw() (it is possible that built-in host drivers will claim all IDE interfaces but later ide-pnp host driver will try to unregister them - this change fixes it). Also skip hwif->hold check if 'initializing == 1' since it is set only by: * pmac - PPC && PMAC specific => no ISA * au1xxx-ide - MIPS && SOC_AU1200 specific => no ISA and use ide_find_port() helper to find free ide_hwifs[] slot. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Assign drive->quirk_list in ->quirkproc implementations: - hpt366.c::hpt3xx_quirkproc() - pdc202xx_new.c::pdcnew_quirkproc() - pdc202xx_old.c::pdc202xx_quirkproc() * Make ->quirkproc void. * Move calling ->quirkproc from do_identify() to probe_hwif(). * Convert it821x_fixups() to it821x_quirkproc() in it821x.c. * Convert siimage_fixup() to sil_quirkproc() in siimage.c, also remove no longer needed drive->present check from is_dev_seagate_sata(). * Convert ide_undecoded_slave() to accept 'drive' instead of 'hwif' as an argument. Then convert ide_register_hw() to accept 'quirkproc' argument instead of 'fixup' one. * Remove no longer needed ->fixup method. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Dump taskfile HOB registers in ide_tf_load() (if DEBUG is defined). * Remove no longer needed DEBUG code from __ide_do_rw_disk(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Merge ->dma_host_{on,off} methods into ->dma_host_set method which takes 'int on' argument. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Enable/disable UDMA in atiixp_set_dma_mode(). * Remove no longer needed atiixp_dma_host_{on,off}() and save_mdma_mode[]. * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Rename cris_dma_{on,off}() to cris_dma_host_{on,off}(). * Remove no longer needed ->dma_off_quietly (IDE core has the needed code now). * Make cris_dma_host_on() void. I left fixing ide-cris after "kill dma_on/dma_off_quietly() methods" patch because: * Currently this driver is broken: cris_dma_on() (returns 'int') is assigned to hwif->dma_host_on (returns 'void') so the driver won't build. * ->ide_dma_on method was missing so the driver OOPS-es on attempt to enable DMA. * drive->using_dma was never set/cleared so DMA wouldn't be used anyway. Unfortunately it seems that ide-cris stays broken even after this patch: * V10: <asm/arch-v10/ide.h> needs fixing - ide_init_default_hwifs() should be removed (IDE core no longer uses it) - same for ide_init_hwif_ports() and ide_default_{irq,io_base}() (they shouldn't be needed for ide-cris host driver) * V32: I'm unable to find a place which defines ETRAX_ARCH_V32 but I'm leaving fixing this to CRIS gurus. :) Cc: Mikael Starvik <starvik@axis.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Make ide_dma_off_quietly() and __ide_dma_on() always available. * Drop "__" prefix from __ide_dma_on(). * Check for presence of ->dma_host_on instead of ->ide_dma_on. * Convert all users of ->ide_dma_on and ->dma_off_quietly methods to use ide_dma_on() and ide_dma_off_quietly() instead. * Remove no longer needed ->ide_dma_on and ->dma_off_quietly methods from ide_hwif_t. * Make ide_dma_on() void. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Add ide_toggle_bounce() call to ->ide_dma_on/->dma_off_quietly methods so they match generic __ide_dma_on()/ide_dma_off_quietly(). Since there is no PCI device there should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Add ide_toggle_bounce() call to ->ide_dma_on/->dma_off_quietly methods so they match generic __ide_dma_on()/ide_dma_off_quietly(). Since there is no PCI device there should be no functionality changes caused by this patch. Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Add ide_toggle_bounce() call to ->ide_dma_on/->dma_off_quietly methods so they match generic __ide_dma_on()/ide_dma_off_quietly(). Tested on Altix by Jeremy. Acked-by: Jeremy Higdon <jeremy@sgi.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Fix SWDMA/MWDMA masks in cy82c693_chipset. * Add IDE_HFLAG_CY82C693 host flag and use it in ide_tune_dma() to check whether the DMA should be enabled even if ide_max_dma_mode() fails. * Convert cy82c693_dma_enable() to become cy82c693_set_dma_mode() and remove no longer needed cy82c693_ide_dma_on(). Then set IDE_HFLAG_CY82C693 instead of IDE_HFLAG_TRUST_BIOS_FOR_DMA in cy82c693_chipset. * Bump driver version. As a result of this patch cy82c693 driver will configure and use DMA on all SWDMA0-2 and MWDMA0-2 capable ATA devices instead of relying on BIOS. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Mask device DMA masks by ATA_{S,M}WDMA2 in cy82c693_ide_dma_on(). * Remove clipping of DMA modes by id->tDMA in cy82c693_dma_enable(): - id->tDMA may not be defined on newer devices - id->vendor6/id->tDMA word is in LE endianness (cy82c693 seems to be Alpha specific though) * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Set the correct hwif->dma_base for the second channel in ide_get_or_set_dma_base(). * Remove DMA enable code from cs5520_set_pio_mode(), this can be handled by the generic ->dma_host_on method now. * Add VDMA check to ide_config_drive_speed(). * drive->using_dma was never enabled since cs5520 host driver's ->ide_dma_on method overrided the generic ->ide_dma_on (so __ide_dma_on() was never called, drive->using_dma was never set and VDMA was never used since it depends on drive->using_dma). Fix it by using ->dma_host_on method instead of ->ide_dma_on (also add matching ->dma_host_off method). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
IDE core guarantees that ->set_dma_mode will be called only for DMA modes set in SWDMA/MWDMA/UDMA masks. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Program register 0x40 in sl82c105_resetproc(). * Remove no longer needed sl82c105_selectproc() and pci_set_drvdata() calls. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
* Program DMA timings in sl82c105_dma_start() (->dma_start method) before starting DMA transfer. * Add sl82c105_dma_end() (->ide_dma_end method) to switch back to PIO timings when DMA transfer is complete. * In sl82c105_set_pio_mode() program timings regardless of ->using_dma setting and in sl82c105_set_dma_mode() only cache the new timings. * Remove no longer needed sl82c105_{ide_dma_on,off_quietly}(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (200 commits) [SCSI] usbstorage: use last_sector_bug flag universally [SCSI] libsas: abstract STP task status into a function [SCSI] ultrastor: clean up inline asm warnings [SCSI] aic7xxx: fix firmware build [SCSI] aacraid: fib context lock for management ioctls [SCSI] ch: remove forward declarations [SCSI] ch: fix device minor number management bug [SCSI] ch: handle class_device_create failure properly [SCSI] NCR5380: fix section mismatch [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices [SCSI] IB/iSER: add logical unit reset support [SCSI] don't use __GFP_DMA for sense buffers if not required [SCSI] use dynamically allocated sense buffer [SCSI] scsi.h: add macro for enclosure bit of inquiry data [SCSI] sd: add fix for devices with last sector access problems [SCSI] fix pcmcia compile problem [SCSI] aacraid: add Voodoo Lite class of cards. [SCSI] aacraid: add new driver features flags [SCSI] qla2xxx: Update version number to 8.02.00-k7. [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] hifn795x: Disallow built-in hifn795x when HW_RANDOM is m
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2Linus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (31 commits) ocfs2: clean up bh null checks ocfs2: document access rules for blocked_lock_list configfs: file.c fix possible recursive locking configfs: dir.c fix possible recursive locking configfs: Remove EXPERIMENTAL ocfs2: bump version number ocfs2/dlm: Clear joining_node on hearbeat node down ocfs2: convert byte order of constant instead of variable ocfs2: Update default cluster timeouts ocfs2: printf fixes ocfs2: Use generic_file_llseek ocfs2: Safer read_inline_data() ocfs2: Silence false lockdep warnings [PATCH 2/2] ocfs2: cluster aware flock() [PATCH 1/2] ocfs2: add flock lock type ocfs2: Local alloc window size changeable via mount option ocfs2: Support commit= mount option ocfs2: Add missing permission checks [PATCH 2/2] ocfs2: Implement group add for online resize [PATCH 1/2] ocfs2: Add group extend for online resize ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (67 commits) fix drivers/ata/sata_fsl.c double-decl [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof() pata_legacy: Merge winbond support ata_generic: Cenatek support pata_winbond: error return pata_serverworks: Fix cable types and cosmetics pata_mpc52xx: remove un-needed assignment libata: fix off-by-one in error categorization ahci: factor out AHCI enabling and enable AHCI before reading CAP ata_piix: implement SIDPR SCR access ata_piix: convert to prepare - activate initialization libata: factor out ata_pci_activate_sff_host() from ata_pci_one() [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof() pata_legacy: resychronize with upstream changes and resubmit [libata] pata_legacy: typo fix [libata] pata_winbond: update for new ->data_xfer hook pata_pcmcia: convert to new data_xfer prototype libata annotations and fixes libata: use dev_driver_string() instead of "libata" in libata-sff.c ata_piix: kill unused constants and flags ...
-