Skip to content

L
linux
Switch branch/tag
  1. 03 Jan, 2015 2 commits
  3. 02 Jan, 2015 14 commits
  5. 01 Jan, 2015 7 commits
  7. 31 Dec, 2014 17 commits
    • David S. Miller's avatar
      igb_ptp: Include clocksource.h to get CLOCKSOURCE_MASK. · 9aacfb20
      David S. Miller authored 
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9aacfb20
    • David S. Miller's avatar
      e1000e: Include clocksource.h to get CLOCKSOURCE_MASK. · 54da5083
      David S. Miller authored 
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      54da5083
    • David S. Miller's avatar
      Merge branch 'fib_trie-next' · e495f78d
      David S. Miller authored 
      Alexander Duyck says:

====================
fib_trie: Reduce time spent in fib_table_lookup by 35 to 75%

These patches are meant to address several performance issues I have seen
in the fib_trie implementation, and fib_table_lookup specifically.  With
these changes in place I have seen a reduction of up to 35 to 75% for the
total time spent in fib_table_lookup depending on the type of search being
performed.

On a VM running in my Corei7-4930K system with a trie of maximum depth of 7
this resulted in a reduction of over 370ns per packet in the total time to
process packets received from an ixgbe interface and route them to a dummy
interface.  This represents a failed lookup in the local trie followed by
a successful search in the main trie.

				Baseline	Refactor
  ixgbe->dummy routing		1.20Mpps	2.21Mpps
  ------------------------------------------------------------
  processing time per packet		835ns		453ns
  fib_table_lookup		50.1%	418ns	25.0%	113ns
  check_leaf.isra.9		 7.9%	 66ns	   --	 --
  ixgbe_clean_rx_irq		 5.3%	 44ns	 9.8%	 44ns
  ip_route_input_noref		 2.9%	 25ns	 4.6%	 21ns
  pvclock_clocksource_read	 2.6%	 21ns	 4.6%	 21ns
  ip_rcv			 2.6%	 22ns	 4.0%	 18ns

In the simple case of receiving a frame and dropping it before it can reach
the socket layer I saw a reduction of 40ns per packet.  This represents a
trip through the local trie with the correct leaf found with no need for
any backtracing.

				Baseline	Refactor
  ixgbe->local receive		2.65Mpps	2.96Mpps
  ------------------------------------------------------------
  processing time per packet		377ns		337ns
  fib_table_lookup		25.1%	 95ns	25.8%	 87ns
  ixgbe_clean_rx_irq		 8.7%	 33ns	 9.0%	 30ns
  check_leaf.isra.9		 7.2%	 27ns	   --	 --
  ip_rcv			 5.7%	 21ns	 6.5%	 22ns

These changes have resulted in several functions being inlined such as
check_leaf and fib_find_node, but due to the code simplification the
overall size of the code has been reduced.

   text	   data	    bss	    dec	    hex	filename
  16932	    376	     16	  17324	   43ac	net/ipv4/fib_trie.o - before
  15259	    376	      8	  15643	   3d1b	net/ipv4/fib_trie.o - after

Changes since RFC:
  Replaced this_cpu_ptr with correct call to this_cpu_inc in patch 1
  Changed test for leaf_info mismatch to (key ^ n->key) & li->mask_plen in patch 10
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e495f78d
    • Alexander Duyck's avatar
      fib_trie: Add tracking value for suffix length · 5405afd1
      Alexander Duyck authored 
      This change adds a tracking value for the maximum suffix length of all
prefixes stored in any given tnode.  With this value we can determine if we
need to backtrace or not based on if the suffix is greater than the pos
value.

By doing this we can reduce the CPU overhead for lookups in the local table
as many of the prefixes there are 32b long and have a suffix length of 0
meaning we can immediately backtrace to the root node without needing to
test any of the nodes between it and where we ended up.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5405afd1
    • Alexander Duyck's avatar
      fib_trie: Remove checks for index >= tnode_child_length from tnode_get_child · 21d1f11d
      Alexander Duyck authored 
      For some reason the compiler doesn't seem to understand that when we are in
a loop that runs from tnode_child_length - 1 to 0 we don't expect the value
of tn->bits to change.  As such every call to tnode_get_child was rerunning
tnode_chile_length which ended up consuming quite a bit of space in the
resultant assembly code.

I have gone though and verified that in all cases where tnode_get_child
is used we are either winding though a fixed loop from tnode_child_length -
1 to 0, or are in a fastpath case where we are verifying the value by
either checking for any remaining bits after shifting index by bits and
testing for leaf, or by using tnode_child_length.

size net/ipv4/fib_trie.o
Before:
   text	   data	    bss	    dec	    hex	filename
  15506	    376	      8	  15890	   3e12	net/ipv4/fib_trie.o

After:
   text	   data	    bss	    dec	    hex	filename
  14827	    376	      8	  15211	   3b6b	net/ipv4/fib_trie.o
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      21d1f11d
    • Alexander Duyck's avatar
      fib_trie: inflate/halve nodes in a more RCU friendly way · 12c081a5
      Alexander Duyck authored 
      This change pulls the node_set_parent functionality out of put_child_reorg
and instead leaves that to the function to take care of as well.  By doing
this we can fully construct the new cluster of tnodes and all of the
pointers out of it before we start routing pointers into it.

I am suspecting this will likely fix some concurency issues though I don't
have a good test to show as such.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      12c081a5
    • Alexander Duyck's avatar
      fib_trie: Push tnode flushing down to inflate/halve · fc86a93b
      Alexander Duyck authored 
      This change pushes the tnode freeing down into the inflate and halve
functions.  It makes more sense here as we have a better grasp of what is
going on and when a given cluster of nodes is ready to be freed.

I believe this may address a bug in the freeing logic as well.  For some
reason if the freelist got to a certain size we would call
synchronize_rcu().  I'm assuming that what they meant to do is call
synchronize_rcu() after they had handed off that much memory via
call_rcu().  As such that is what I have updated the behavior to be.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fc86a93b
    • Alexander Duyck's avatar
      fib_trie: Push assignment of child to parent down into inflate/halve · ff181ed8
      Alexander Duyck authored 
      This change makes it so that the assignment of the tnode to the parent is
handled directly within whatever function is currently handling the node be
it inflate, halve, or resize.  By doing this we can avoid some of the need
to set NULL pointers in the tree while we are resizing the subnodes.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ff181ed8
    • Alexander Duyck's avatar
      fib_trie: Add functions should_inflate and should_halve · f05a4819
      Alexander Duyck authored 
      This change pulls the logic for if we should inflate/halve the nodes out
into separate functions.  It also addresses what I believe is a bug where 1
full node is all that is needed to keep a node from ever being halved.

Simple script to reproduce the issue:
	modprobe dummy;	ifconfig dummy0 up
	for i in `seq 0 255`; do ifconfig dummy0:$i 10.0.${i}.1/24 up; done
	ifconfig dummy0:256 10.0.255.33/16 up
	for i in `seq 0 254`; do ifconfig dummy0:$i down; done

Results from /proc/net/fib_triestat
Before:
	Local:
		Aver depth:     3.00
		Max depth:      4
		Leaves:         17
		Prefixes:       18
		Internal nodes: 11
		  1: 8  2: 2  10: 1
		Pointers: 1048
	Null ptrs: 1021
	Total size: 11  kB
After:
	Local:
		Aver depth:     3.41
		Max depth:      5
		Leaves:         17
		Prefixes:       18
		Internal nodes: 12
		  1: 8  2: 3  3: 1
		Pointers: 36
	Null ptrs: 8
	Total size: 3  kB
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f05a4819
    • Alexander Duyck's avatar
      fib_trie: Move resize to after inflate/halve · cf3637bb
      Alexander Duyck authored 
      This change consists of a cut/paste of resize to behind inflate and halve
so that I could remove the two function prototypes.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cf3637bb
    • Alexander Duyck's avatar
      fib_trie: Push rcu_read_lock/unlock to callers · 345e9b54
      Alexander Duyck authored 
      This change is to start cleaning up some of the rcu_read_lock/unlock
handling.  I realized while reviewing the code there are several spots that
I don't believe are being handled correctly or are masking warnings by
locally calling rcu_read_lock/unlock instead of calling them at the correct
level.

A common example is a call to fib_get_table followed by fib_table_lookup.
The rcu_read_lock/unlock ought to wrap both but there are several spots where
they were not wrapped.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      345e9b54
    • Alexander Duyck's avatar
      fib_trie: Use unsigned long for anything dealing with a shift by bits · 98293e8d
      Alexander Duyck authored 
      This change makes it so that anything that can be shifted by, or compared
to a value shifted by bits is updated to be an unsigned long.  This is
mostly a precaution against an insanely huge address space that somehow
starts coming close to the 2^32 root node size which would require
something like 1.5 billion addresses.

I chose unsigned long instead of unsigned long long since I do not believe
it is possible to allocate a 32 bit tnode on a 32 bit system as the memory
consumed would be 16GB + 28B which exceeds the addressible space for any
one process.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      98293e8d
    • Alexander Duyck's avatar
      fib_trie: Update meaning of pos to represent unchecked bits · e9b44019
      Alexander Duyck authored 
      This change moves the pos value to the other side of the "bits" field.  By
doing this it actually simplifies a significant amount of code in the trie.

For example when halving a tree we know that the bit lost exists at
oldnode->pos, and if we inflate the tree the new bit being add is at
tn->pos.  Previously to find those bits you would have to subtract pos and
bits from the keylength or start with a value of (1 << 31) and then shift
that.

There are a number of spots throughout the code that benefit from this.  In
the case of the hot-path searches the main advantage is that we can drop 2
or more operations from the search path as we no longer need to compute the
value for the index to be shifted by and can instead just use the raw pos
value.

In addition the tkey_extract_bits is now defunct and can be replaced by
get_index since the two operations were doing the same thing, but now
get_index does it much more quickly as it is only an xor and shift versus a
pair of shifts and a subtraction.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e9b44019
    • Alexander Duyck's avatar
      fib_trie: Optimize fib_table_insert · 836a0123
      Alexander Duyck authored 
      This patch updates the fib_table_insert function to take advantage of the
changes made to improve the performance of fib_table_lookup.  As a result
the code should be smaller and run faster then the original.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      836a0123
    • Alexander Duyck's avatar
      fib_trie: Optimize fib_find_node · 939afb06
      Alexander Duyck authored 
      This patch makes use of the same features I made use of for
fib_table_lookup to streamline fib_find_node.  The resultant code should be
smaller and run faster than the original.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      939afb06
    • Alexander Duyck's avatar
      fib_trie: Optimize fib_table_lookup to avoid wasting time on loops/variables · 9f9e636d
      Alexander Duyck authored 
      This patch is meant to reduce the complexity of fib_table_lookup by reducing
the number of variables to the bare minimum while still keeping the same if
not improved functionality versus the original.

Most of this change was started off by the desire to rid the function of
chopped_off and current_prefix_length as they actually added very little to
the function since they only applied when computing the cindex.  I was able
to replace them mostly with just a check for the prefix match.  As long as
the prefix between the key and the node being tested was the same we know
we can search the tnode fully versus just testing cindex 0.

The second portion of the change ended up being a massive reordering.
Originally the calls to check_leaf were up near the start of the loop, and
the backtracing and descending into lower levels of tnodes was later.  This
didn't make much sense as the structure of the tree means the leaves are
always the last thing to be tested.  As such I reordered things so that we
instead have a loop that will delve into the tree and only exit when we
have either found a leaf or we have exhausted the tree.  The advantage of
rearranging things like this is that we can fully inline check_leaf since
there is now only one reference to it in the function.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9f9e636d
    • Alexander Duyck's avatar
      fib_trie: Merge leaf into tnode · adaf9816
      Alexander Duyck authored 
      This change makes it so that leaf and tnode are the same struct.  As a
result there is no need for rt_trie_node anymore since everyting can be
merged into tnode.

On 32b systems this results in the leaf being 4 bytes larger, however I
don't know if that is really an issue as this and an eariler patch that
added bits & pos have increased the size from 20 to 28.  If I am not
mistaken slub/slab allocate on power of 2 sizes so 20 was likely being
rounded up to 32 anyway.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      adaf9816
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7