Display core provides a feature that makes it easy for users to debug
Multiple planes by enabling a visual notification at the bottom of each
plane. This commit introduces how to use such a feature.
Reviewed-by: Yann Dirson <ydirson@free.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Display core documentation is not well organized, and it is hard to find
information due to the lack of sections. This commit reorganizes the
documentation layout, and it is preparation work for future changes.

Changes since V1:
- Christian: Group amdgpu documentation together.
- Daniel: Drop redundant amdgpu prefix.
- Jani: Create index pages.
- Yann: Mirror display folder in the documentation.
Reviewed-by: Yann Dirson <ydirson@free.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

SMU firmware expects the driver maintains error context
and doesn't interact with SMU any more when SMU errors
occurred. That will aid in debugging SMU firmware issues.

Add SMU debug option support for this request, it can be
enabled or disabled via amdgpu_smu_debug debugfs file.
Use a 32-bit mask to indicate corresponding debug modes.
Currently, only one mode(HALT_ON_ERROR) is supported.
When enabled, it brings hardware to a kind of halt state
so that no one can touch it any more in the envent of SMU
errors.

The dirver interacts with SMU via sending messages. And
threre are three ways to sending messages to SMU in current
implementation. Handle them respectively as following:

1, smu_cmn_send_smc_msg_with_param() for normal timeout cases

  Halt on any error.

2, smu_cmn_send_msg_without_waiting()/smu_cmn_wait_for_response()
for longer timeout cases

  Halt on errors apart from ETIME. Otherwise this way won't work.
  Let the user handle ETIME error in such a case.

3, smu_cmn_send_msg_without_waiting() for no waiting cases

  Halt on errors apart from ETIME. Otherwise second way won't work.

== Command Guide ==

1, enable HALT_ON_ERROR mode

 # echo 0x1 > /sys/kernel/debug/dri/0/amdgpu_smu_debug

2, disable HALT_ON_ERROR mode

 # echo 0x0 > /sys/kernel/debug/dri/0/amdgpu_smu_debug

v5:
 - Use bit mask to allow more debug features.(Evan)
 - Use WRAN() instead of BUG().(Evan)

v4:
 - Set to halt state instead of a simple hang.(Christian)

v3:
 - Use debugfs_create_bool().(Christian)
 - Put variable into smu_context struct.
 - Don't resend command when timeout.

v2:
 - Resend command when timeout.(Lijo)
 - Use debugfs file instead of module parameter.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It is useful to maintain error context when debugging
SW/FW issues. Introduce amdgpu_device_halt() for this
purpose. It will bring hardware to a kind of halt state,
so that no one can touch it any more.

Compare to a simple hang, the system will keep stable
at least for SSH access. Then it should be trivial to
inspect the hardware state and see what's going on.

v2:
 - Set adev->no_hw_access earlier to avoid potential crashes.(Christian)
Suggested-by: Christian Koenig <christian.koenig@amd.com>
Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.co>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

in case they are not avaiable in early phase
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Leave this bit as hardware default setting
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

should count on GC IP base address
Signed-off-by: Le Ma <le.ma@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

read and authenticate ip discovery binary getting from
vram first, if it is not valid, read and authenticate
the one getting from file
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To be used to check ip discovery binary signature
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add _from_vram in the funciton name to diffrentiate
the one used to read from file
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To be used when ip_discovery binary is not carried by vbios
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Guest OS will setup VCN instance 1 which is disabled as an enabled instance and
execute initialization work on it, but this causes VCN ib ring test failure
on the disabled VCN instance during modprobe:

amdgpu 0000:00:08.0: amdgpu: ring vcn_enc_1.0 uses VM inv eng 5 on hub 1
amdgpu 0000:00:08.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on vcn_dec_0 (-110).
amdgpu 0000:00:08.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on vcn_enc_0.0 (-110).
[drm:amdgpu_device_delayed_init_work_handler [amdgpu]] *ERROR* ib ring test failed (-110).

v2: drop amdgpu_discovery_get_vcn_version and rename sriov_config to
vcn_config
v3: modify VCN's revision in SR-IOV and bare-metal

Fixes: baf3f8f3 ("drm/amdgpu: handle SRIOV VCN revision parsing")
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix following warning in SRIOV during modprobe:

amdgpu 0000:00:08.0: GFX9+ requires FB check based on format modifier
WARNING: CPU: 0 PID: 1023 at drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:1150 amdgpu_display_framebuffer_init+0x8e7/0xb40 [amdgpu]
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch reverts the following:
commit 48733b22 ("drm/amdkfd: add Navi2x to GWS init conditions")

Disable GWS usage in default settings for now due to FW bugs.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Initalize GWS on Navi2x with mec2_fw_version >= 0x42.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-and-tested-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We found some headaches on ASICs don't need that,
so remove that for them.
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Kevin Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Currently, we don't find some neccesities to power on/off
SDMA in SMU hw_init/fini(). It makes more sense in SDMA
hw_init/fini().
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Kevin Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Hawaii support is mostly untested these days. ROCm user mode also
depends on custom firmware for AQL packet processing, that was never
pushed upstream due to quality regressions in graphics driver testing.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If an existing SVM range overlaps an svm_range_set_attr call, we would
normally split it in order to update only the overlapping part.
However, if the attributes of the existing range would not be changed
splitting it is unnecessary.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The existing function doesn't compare the access bitmaps and flags.
This can result in failure to update those attributes in existing
ranges when all other attributes remained unchanged.

Because the access and flags attributes modify only some bits in the
respective bitmaps, we cannot compare them directly. Instead we need to
check whether applying the attributes to a particular range would
change the bitmaps.

A PREFETCH_LOC attribute must always trigger a migration, even if the
attribute value remains unchanged. E.g. if some pages were migrated due
to a CPU page fault, a prefetch must still be executed to migrate pages
back to VRAM.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add null-pointer check after the last svm_range_new call. This was
originally reported by Zhou Qingyang <zhou1615@umn.edu> based on a
static analyzer.

To avoid duplicating the unwinding code from svm_range_handle_overlap,
I merged the two functions into one.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Zhou Qingyang <zhou1615@umn.edu>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Remove not unique timestamp WARNING as same timestamp interrupt happens
on some chips,

Drain fault need to wait for the processed_timestamp to be truly greater
than the checkpoint or the ring to be empty to be sure no stale faults
are handled.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1818Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This fixes the warning below by changing the prototype to a location
that's actually included by the .c files that call
amdgpu_kms_compat_ioctl:

 warning: no previous prototype for ‘amdgpu_kms_compat_ioctl’
 [-Wmissing-prototypes]
 37 | long amdgpu_kms_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
    |      ^~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This fixes warnings caused by global functions lacking prototypes:, such as:

 warning: no previous prototype for 'dcn303_hw_sequencer_construct'
 [-Wmissing-prototypes]
 12 | void dcn303_hw_sequencer_construct(struct dc *dc)
    |      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 ...
 warning: no previous prototype for ‘amdgpu_has_atpx’
 [-Wmissing-prototypes]
 76 | bool amdgpu_has_atpx(void) {
    |      ^~~~~~~~~~~~~~~
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

 This turns previously global functions into static, thus removing
 compile-time warnings such as:

 warning: no previous prototype for 'pm_set_resources_vi' [-Wmissing-prototypes]
 113 | int pm_set_resources_vi(struct packet_manager *pm, uint32_t *buffer,
     |     ^~~~~~~~~~~~~~~~~~~
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This turns previously global functions into static, thus removing
compile-time warnings such as:

 warning: no previous prototype for 'amdgpu_vkms_output_init' [-Wmissing-prototypes]
 399 | int amdgpu_vkms_output_init(struct drm_device *dev,
     |     ^~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This fixes various warnings relating to erroneous docstring syntax, of
which some are listed below:

 warning: Function parameter or member 'adev' not described in
 'amdgpu_atomfirmware_ras_rom_addr'
 ...
 warning: expecting prototype for amdgpu_atpx_validate_functions().
 Prototype was for amdgpu_atpx_validate() instead
 ...
 warning: Excess function parameter 'mem' description in 'amdgpu_preempt_mgr_new'
 ...
 warning: Cannot understand  * @kfd_get_cu_occupancy - Collect number of
 waves in-flight on this device
 ...
 warning: This comment starts with '/**', but isn't a kernel-doc
 comment. Refer Documentation/doc-guide/kernel-doc.rst
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Silences 166 compile-time warnings like:

 warning: 'UVD0_BASE' defined but not used [-Wunused-const-variable=]
 129 | static const struct IP_BASE UVD0_BASE ={ { { { 0x00007800, 0x00007E00, 0, 0, 0 } },
     |                             ^~~~~~~~~
 warning: 'UMC0_BASE' defined but not used [-Wunused-const-variable=]
 123 | static const struct IP_BASE UMC0_BASE ={ { { { 0x00014000, 0, 0, 0, 0 } },
     |                             ^~~~~~~~~
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For the ASIC has big FB, it need more time to clear FB during reset.
This change extended SRIOV VF waiting reset completion timeout from 5s
to 10s.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Acked-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For SRIOV VF, the XGMI topology was not recovered after reset. This
change added code to SRIOV VF reset function to update XGMI topology
for SRIOV VF after reset.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For SRIOV VF, XGMI was not initialized in PSP during recover. This change
added PSP XGMI initialization for SRIOV VF during recover.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On SRIOV, host driver can support FLR(function level reset) on individual VF
within the hive which might bring the individual device back to normal without
the necessary to execute the hive reset. If the FLR failed , host driver will
trigger the hive reset, each guest VF will get reset notification before the
real hive reset been executed. The VF device can handle the reset request
individually in it's reset work handler.

This change updated gpu recover sequence to skip reset other device in
the same hive for SRIOV VF.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Allow for disabling non transparent mode of LTTPR for running tests.

[How]
Add a feature flag and set them during init sequence. The flags are
already being used in DC.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The RAS poison mode is enabled by default on the platform.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It is to force SST sequence on MST capable receivers.

v2: squash in compilation fix when CONFIG_DRM_AMD_DC_DCN is not set
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Once EDID is parsed, the monitor HDMI support information is available
through drm_display_info.is_hdmi. The amdgpu driver still calls
drm_detect_hdmi_monitor() to retrieve the same information, which
is less efficient. Change to drm_display_info.is_hdmi

This is a TODO task in Documentation/gpu/todo.rst
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Claudio Suarez <cssk@net-c.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use drm_edid_get_monitor_name() instead of duplicating the code that
parses the EDID in dm_helpers_parse_edid_caps()
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Claudio Suarez <cssk@net-c.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm_display_info is updated by drm_get_edid() or
drm_connector_update_edid_property(). In the amdgpu driver it is almost
always updated when the edid is read in amdgpu_connector_get_edid(),
but not always.  Change amdgpu_connector_get_edid() and
amdgpu_connector_free_edid() to keep drm_display_info updated.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Claudio Suarez <cssk@net-c.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
During dcn31_stream_encoder_create, if PHYC/D get remapped to F/G on B0
then we'll index 5 or 6 into a array of length 5 - leading to an
access violation on some configs during device creation.

[How]
Software won't be touching PHYF/PHYG directly, so just extend the
array to cover all possible engine IDs.

Even if it does by try to access one of these registers by accident
the offset will be 0 and we'll get a warning during the access.

Fixes: 2fe9a0e1 ("drm/amd/display: Fix DCN3 B0 DP Alt Mapping")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

remove in recovery stat check, skip umc ras err cnt
harvest in amdgpu_ras_log_on_err_counter
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>