- 22 Oct, 2012 1 commit
-
-
Greg Kroah-Hartman authored
This reverts commit 2101aa5b which is commit 60ea8226 upstream. To quote Ben: This is not needed, as there is no QUEUE_FLAG_BYPASS in 3.0.y. To quote Tejun: I don't think it will break anything as it simply changes assignment to |= to avoid overwriting existing flags. That said, any patch can break anything, so if possible it would be better to drop for 3.0.y. So I'll revert this to be safe. Cc: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 21 Oct, 2012 38 commits
-
-
Greg Kroah-Hartman authored
-
Maxim Kachur authored
commit 10f571d0 upstream. Add chip details for E-mu 1010 PCIe card. It has the same chip as found in E-mu 1010b but it uses different PCI id. Signed-off-by:
Maxim Kachur <mcdebugger@duganet.ru> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 733a48e5 upstream. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44721Signed-off-by:
-
Nikola Pajkovsky authored
commit 68766a2e upstream. In case we detect a problem and bail out, we fail to set "ret" to a nonzero value, and udf_load_logicalvol will mistakenly report success. Signed-off-by:
Nikola Pajkovsky <npajkovs@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Peter Huewe authored
commit abce9ac2 upstream. tpm_write calls tpm_transmit without checking the return value and assigns the return value unconditionally to chip->pending_data, even if it's an error value. This causes three bugs. So if we write to /dev/tpm0 with a tpm_param_size bigger than TPM_BUFSIZE=0x1000 (e.g. 0x100a) and a bufsize also bigger than TPM_BUFSIZE (e.g. 0x100a) tpm_transmit returns -E2BIG which is assigned to chip->pending_data as -7, but tpm_write returns that TPM_BUFSIZE bytes have been successfully been written to the TPM, altough this is not true (bug #1). As we did write more than than TPM_BUFSIZE bytes but tpm_write reports that only TPM_BUFSIZE bytes have been written the vfs tries to write the remaining bytes (in this case 10 bytes) to the tpm device driver via tpm_write which then blocks at /* cannot perform a write until the read has cleared either via tpm_read or a user_read_timer timeout */ while (atomic_read(&chip->data_pending) != 0) msleep(TPM_TIMEOUT); for 60 seconds, since data_pending is -7 and nobody is able to read it (since tpm_read luckily checks if data_pending is greater than 0) (#bug 2). After that the remaining bytes are written to the TPM which are interpreted by the tpm as a normal command. (bug #3) So if the last bytes of the command stream happen to be a e.g. tpm_force_clear this gets accidentally sent to the TPM. This patch fixes all three bugs, by propagating the error code of tpm_write and returning -E2BIG if the input buffer is too big, since the response from the tpm for a truncated value is bogus anyway. Moreover it returns -EBUSY to userspace if there is a response ready to be read. Signed-off-by:
Peter Huewe <peter.huewe@infineon.com> Signed-off-by:
Kent Yoder <key@linux.vnet.ibm.com> Signed-off-by:
-
H. Peter Anvin authored
commit 49d859d7 upstream. If the CPU declares that RDRAND is available, go through a guranteed reseed sequence, and make sure that it is actually working (producing data.) If it does not, disable the CPU feature flag. Allow RDRAND to be disabled on the command line (as opposed to at compile time) for a user who has special requirements with regards to random numbers. Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
H. Peter Anvin authored
commit 628c6246 upstream. Architectural inlines to get random ints and longs using the RDRAND instruction. Intel has introduced a new RDRAND instruction, a Digital Random Number Generator (DRNG), which is functionally an high bandwidth entropy source, cryptographic whitener, and integrity monitor all built into hardware. This enables RDRAND to be used directly, bypassing the kernel random number pool. For technical documentation, see: http://software.intel.com/en-us/articles/download-the-latest-bull-mountain-software-implementation-guide/ In this patch, this is *only* used for the nonblocking random number pool. RDRAND is a nonblocking source, similar to our /dev/urandom, and is therefore not a direct replacement for /dev/random. The architectural hooks presented in the previous patch only feed the kernel internal users, which only use the nonblocking pool, and so this is not a problem. Since this instruction is available in userspace, there is no reason to have a /dev/hw_rng device driver for the purpose of feeding rngd. This is especially so since RDRAND is a nonblocking source, and needs additional whitening and reduction (see the above technical documentation for details) in order to be of "pure entropy source" quality. The CONFIG_EXPERT compile-time option can be used to disable this use of RDRAND. Signed-off-by:
Fenghua Yu <fenghua.yu@intel.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Jan Kara authored
commit 09e05d48 upstream. ext3 users of data=journal mode with blocksize < pagesize were occasionally hitting assertion failure in journal_commit_transaction() checking whether the transaction has at least as many credits reserved as buffers attached. The core of the problem is that when a file gets truncated, buffers that still need checkpointing or that are attached to the committing transaction are left with buffer_mapped set. When this happens to buffers beyond i_size attached to a page stradding i_size, subsequent write extending the file will see these buffers and as they are mapped (but underlying blocks were freed) things go awry from here. The assertion failure just coincidentally (and in this case luckily as we would start corrupting filesystem) triggers due to journal_head not being properly cleaned up as well. Under some rare circumstances this bug could even hit data=ordered mode users. There the assertion won't trigger and we would end up corrupting the filesystem. We fix the problem by unmapping buffers if possible (in lots of cases we just need a buffer attached to a transaction as a place holder but it must not be written out anyway). And in one case, we just have to bite the bullet and wait for transaction commit to finish. Reviewed-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
-
Egbert Eich authored
commit 08291847 upstream. radeon_i2c_fini() walks thru the list of I2C bus recs rdev->i2c_bus[] to destroy each of them. radeon_ext_tmds_enc_destroy() however also has code to destroy it's associated I2C bus rec which has been obtained by radeon_i2c_lookup() and is therefore also in the i2c_bus[] list. This causes a double free resulting in a kernel panic when unloading the radeon driver. Removing destroy code from radeon_ext_tmds_enc_destroy() fixes this problem. agd5f: fix compiler warning Signed-off-by:
Egbert Eich <eich@suse.de> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Jean-Christian de Rivaz authored
commit e7d491a1 upstream. This USB V.92/V.32bis Controllered Modem have the USB vendor ID 0x0572 and device ID 0x1340. It need the NO_UNION_NORMAL quirk to be recognized. Reference: http://www.conexant.com/servlets/DownloadServlet/DSH-201723-005.pdf?docid=1725&revid=5 See idVendor and idProduct in table 6-1. Device Descriptors Signed-off-by:
Jean-Christian de Rivaz <jc@eclis.ch> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jan Engelhardt authored
commit 82e6bfe2 upstream. Commit v2.6.19-rc1~1272^2~41 tells us that r->cost != 0 can happen when a running state is saved to userspace and then reinstated from there. Make sure that private xt_limit area is initialized with correct values. Otherwise, random matchings due to use of uninitialized memory. Signed-off-by:
Jan Engelhardt <jengelh@inai.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Acked-by:
-
Florian Westphal authored
commit 7a909ac7 upstream. credit_cap can be set to credit, which avoids inlining user2credits twice. Also, remove inline keyword and let compiler decide. old: 684 192 0 876 36c net/netfilter/xt_limit.o 4927 344 32 5303 14b7 net/netfilter/xt_hashlimit.o now: 668 192 0 860 35c net/netfilter/xt_limit.o 4793 344 32 5169 1431 net/netfilter/xt_hashlimit.o Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 2614f864 upstream. In __nf_ct_expect_check, the function refresh_timer returns 1 if a matching expectation is found and its timer is successfully refreshed. This results in nf_ct_expect_related returning 0. Note that at this point: - the passed expectation is not inserted in the expectation table and its timer was not initialized, since we have refreshed one matching/existing expectation. - nf_ct_expect_alloc uses kmem_cache_alloc, so the expectation timer is in some undefined state just after the allocation, until it is appropriately initialized. This can be a problem for the SIP helper during the expectation addition: ... if (nf_ct_expect_related(rtp_exp) == 0) { if (nf_ct_expect_related(rtcp_exp) != 0) nf_ct_unexpect_related(rtp_exp); ... Note that nf_ct_expect_related(rtp_exp) may return 0 for the timer refresh case that is detailed above. Then, if nf_ct_unexpect_related(rtcp_exp) returns != 0, nf_ct_unexpect_related(rtp_exp) is called, which does: spin_lock_bh(&nf_conntrack_lock); if (del_timer(&exp->timeout)) { nf_ct_unlink_expect(exp); nf_ct_expect_put(exp); } spin_unlock_bh(&nf_conntrack_lock); Note that del_timer always returns false if the timer has been initialized. However, the timer was not initialized since setup_timer was not called, therefore, the expectation timer remains in some undefined state. If I'm not missing anything, this may lead to the removal an unexistent expectation. To fix this, the optimization that allows refreshing an expectation is removed. Now nf_conntrack_expect_related looks more consistent to me since it always add the expectation in case that it returns success. Thanks to Patrick McHardy for participating in the discussion of this patch. I think this may be the source of the problem described by: http://marc.info/?l=netfilter-devel&m=134073514719421&w=2Reported-by:
Rafal Fitt <rafalf@aplusc.com.pl> Acked-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Patrick McHardy authored
commit f22eb25c upstream. Via-headers are parsed beginning at the first character after the Via-address. When the address is translated first and its length decreases, the offset to start parsing at is incorrect and header parameters might be missed. Update the offset after translating the Via-address to fix this. Signed-off-by:
-
Lin Ming authored
commit 9e33ce45 upstream. IPVS should not reset skb->nf_bridge in FORWARD hook by calling nf_reset for NAT replies. It triggers oops in br_nf_forward_finish. [ 579.781508] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [ 579.781669] IP: [<ffffffff817b1ca5>] br_nf_forward_finish+0x58/0x112 [ 579.781792] PGD 218f9067 PUD 0 [ 579.781865] Oops: 0000 [#1] SMP [ 579.781945] CPU 0 [ 579.781983] Modules linked in: [ 579.782047] [ 579.782080] [ 579.782114] Pid: 4644, comm: qemu Tainted: G W 3.5.0-rc5-00006-g95e69f9 #282 Hewlett-Packard /30E8 [ 579.782300] RIP: 0010:[<ffffffff817b1ca5>] [<ffffffff817b1ca5>] br_nf_forward_finish+0x58/0x112 [ 579.782455] RSP: 0018:ffff88007b003a98 EFLAGS: 00010287 [ 579.782541] RAX: 0000000000000008 RBX: ffff8800762ead00 RCX: 000000000001670a [ 579.782653] RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff8800762ead00 [ 579.782845] RBP: ffff88007b003ac8 R08: 0000000000016630 R09: ffff88007b003a90 [ 579.782957] R10: ffff88007b0038e8 R11: ffff88002da37540 R12: ffff88002da01a02 [ 579.783066] R13: ffff88002da01a80 R14: ffff88002d83c000 R15: ffff88002d82a000 [ 579.783177] FS: 0000000000000000(0000) GS:ffff88007b000000(0063) knlGS:00000000f62d1b70 [ 579.783306] CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b [ 579.783395] CR2: 0000000000000004 CR3: 00000000218fe000 CR4: 00000000000027f0 [ 579.783505] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 579.783684] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 579.783795] Process qemu (pid: 4644, threadinfo ffff880021b20000, task ffff880021aba760) [ 579.783919] Stack: [ 579.783959] ffff88007693cedc ffff8800762ead00 ffff88002da01a02 ffff8800762ead00 [ 579.784110] ffff88002da01a02 ffff88002da01a80 ffff88007b003b18 ffffffff817b26c7 [ 579.784260] ffff880080000000 ffffffff81ef59f0 ffff8800762ead00 ffffffff81ef58b0 [ 579.784477] Call Trace: [ 579.784523] <IRQ> [ 579.784562] [ 579.784603] [<ffffffff817b26c7>] br_nf_forward_ip+0x275/0x2c8 [ 579.784707] [<ffffffff81704b58>] nf_iterate+0x47/0x7d [ 579.784797] [<ffffffff817ac32e>] ? br_dev_queue_push_xmit+0xae/0xae [ 579.784906] [<ffffffff81704bfb>] nf_hook_slow+0x6d/0x102 [ 579.784995] [<ffffffff817ac32e>] ? br_dev_queue_push_xmit+0xae/0xae [ 579.785175] [<ffffffff8187fa95>] ? _raw_write_unlock_bh+0x19/0x1b [ 579.785179] [<ffffffff817ac417>] __br_forward+0x97/0xa2 [ 579.785179] [<ffffffff817ad366>] br_handle_frame_finish+0x1a6/0x257 [ 579.785179] [<ffffffff817b2386>] br_nf_pre_routing_finish+0x26d/0x2cb [ 579.785179] [<ffffffff817b2cf0>] br_nf_pre_routing+0x55d/0x5c1 [ 579.785179] [<ffffffff81704b58>] nf_iterate+0x47/0x7d [ 579.785179] [<ffffffff817ad1c0>] ? br_handle_local_finish+0x44/0x44 [ 579.785179] [<ffffffff81704bfb>] nf_hook_slow+0x6d/0x102 [ 579.785179] [<ffffffff817ad1c0>] ? br_handle_local_finish+0x44/0x44 [ 579.785179] [<ffffffff81551525>] ? sky2_poll+0xb35/0xb54 [ 579.785179] [<ffffffff817ad62a>] br_handle_frame+0x213/0x229 [ 579.785179] [<ffffffff817ad417>] ? br_handle_frame_finish+0x257/0x257 [ 579.785179] [<ffffffff816e3b47>] __netif_receive_skb+0x2b4/0x3f1 [ 579.785179] [<ffffffff816e69fc>] process_backlog+0x99/0x1e2 [ 579.785179] [<ffffffff816e6800>] net_rx_action+0xdf/0x242 [ 579.785179] [<ffffffff8107e8a8>] __do_softirq+0xc1/0x1e0 [ 579.785179] [<ffffffff8135a5ba>] ? trace_hardirqs_off_thunk+0x3a/0x6c [ 579.785179] [<ffffffff8188812c>] call_softirq+0x1c/0x30 The steps to reproduce as follow, 1. On Host1, setup brige br0(192.168.1.106) 2. Boot a kvm guest(192.168.1.105) on Host1 and start httpd 3. Start IPVS service on Host1 ipvsadm -A -t 192.168.1.106:80 -s rr ipvsadm -a -t 192.168.1.106:80 -r 192.168.1.105:80 -m 4. Run apache benchmark on Host2(192.168.1.101) ab -n 1000 http://192.168.1.106/ ip_vs_reply4 ip_vs_out handle_response ip_vs_notrack nf_reset() { skb->nf_bridge = NULL; } Actually, IPVS wants in this case just to replace nfct with untracked version. So replace the nf_reset(skb) call in ip_vs_notrack() with a nf_conntrack_put(skb->nfct) call. Signed-off-by:
Lin Ming <mlin@ss.pku.edu.cn> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 3f509c68 upstream. We're hitting bug while trying to reinsert an already existing expectation: kernel BUG at kernel/timer.c:895! invalid opcode: 0000 [#1] SMP [...] Call Trace: <IRQ> [<ffffffffa0069563>] nf_ct_expect_related_report+0x4a0/0x57a [nf_conntrack] [<ffffffff812d423a>] ? in4_pton+0x72/0x131 [<ffffffffa00ca69e>] ip_nat_sdp_media+0xeb/0x185 [nf_nat_sip] [<ffffffffa00b5b9b>] set_expected_rtp_rtcp+0x32d/0x39b [nf_conntrack_sip] [<ffffffffa00b5f15>] process_sdp+0x30c/0x3ec [nf_conntrack_sip] [<ffffffff8103f1eb>] ? irq_exit+0x9a/0x9c [<ffffffffa00ca738>] ? ip_nat_sdp_media+0x185/0x185 [nf_nat_sip] We have to remove the RTP expectation if the RTCP expectation hits EBUSY since we keep trying with other ports until we succeed. Reported-by:
-
Jozsef Kadlecsik authored
commit 07153c6e upstream. It was reported that the Linux kernel sometimes logs: klogd: [2629147.402413] kernel BUG at net / netfilter / nf_conntrack_proto_tcp.c: 447! klogd: [1072212.887368] kernel BUG at net / netfilter / nf_conntrack_proto_tcp.c: 392 ipv4_get_l4proto() in nf_conntrack_l3proto_ipv4.c and tcp_error() in nf_conntrack_proto_tcp.c should catch malformed packets, so the errors at the indicated lines - TCP options parsing - should not happen. However, tcp_error() relies on the "dataoff" offset to the TCP header, calculated by ipv4_get_l4proto(). But ipv4_get_l4proto() does not check bogus ihl values in IPv4 packets, which then can slip through tcp_error() and get caught at the TCP options parsing routines. The patch fixes ipv4_get_l4proto() by invalidating packets with bogus ihl value. The patch closes netfilter bugzilla id 771. Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 5b423f6a upstream. Existing code assumes that del_timer returns true for alive conntrack entries. However, this is not true if reliable events are enabled. In that case, del_timer may return true for entries that were just inserted in the dying list. Note that packets / ctnetlink may hold references to conntrack entries that were just inserted to such list. This patch fixes the issue by adding an independent timer for event delivery. This increases the size of the ecache extension. Still we can revisit this later and use variable size extensions to allocate this area on demand. Tested-by:
Oliver Smith <olipro@8.c.9.b.0.7.4.0.1.0.0.2.ip6.arpa> Signed-off-by:
-
Julian Anastasov authored
commit 283283c4 upstream. After commit 39f618b4 (3.4) "ipvs: reset ipvs pointer in netns" we can oops in ip_vs_dst_event on rmmod ip_vs because ip_vs_control_cleanup is called after the ipvs_core_ops subsys is unregistered and net->ipvs is NULL. Fix it by exiting early from ip_vs_dst_event if ipvs is NULL. It is safe because all services and dests for the net are already freed. Signed-off-by:
-
Matt Carlson authored
commit b7abee6e upstream. 5906 devices also need the short DMA fragment workaround. This patch makes the necessary change. Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Tested-by:
Christian Kujau <lists@nerdbynature.de> Signed-off-by:
Mike Pagano <mpagano@gentoo.org>
-
Amerigo Wang authored
commit 5aa8b572 upstream. For IPv6, sizeof(struct ipv6hdr) = 40, thus the following expression will result negative: datalen = pkt_dev->cur_pkt_size - 14 - sizeof(struct ipv6hdr) - sizeof(struct udphdr) - pkt_dev->pkt_overhead; And, the check "if (datalen < sizeof(struct pktgen_hdr))" will be passed as "datalen" is promoted to unsigned, therefore will cause a crash later. This is a quick fix by checking if "datalen" is negative. The following patch will increase the default value of 'min_pkt_size' for IPv6. This bug should exist for a long time, so Cc -stable too. Signed-off-by:
Cong Wang <amwang@redhat.com> Signed-off-by:
-
Hildner, Christian authored
commit 26cff4e2 upstream. Adding two (or more) timers with large values for "expires" (they have to reside within tv5 in the same list) leads to endless looping between cascade() and internal_add_timer() in case CONFIG_BASE_SMALL is one and jiffies are crossing the value 1 << 18. The bug was introduced between 2.6.11 and 2.6.12 (and survived for quite some time). This patch ensures that when cascade() is called timers within tv5 are not added endlessly to their own list again, instead they are added to the next lower tv level tv4 (as expected). Signed-off-by:
Christian Hildner <christian.hildner@siemens.com> Reviewed-by:
Jan Kiszka <jan.kiszka@siemens.com> Link: http://lkml.kernel.org/r/98673C87CB31274881CFFE0B65ECC87B0F5FC1963E@DEFTHW99EA4MSX.ww902.siemens.netSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Daniel Drake authored
commit 012a1211 upstream. As detailed in the thread titled "viafb PLL/clock tweaking causes XO-1.5 instability," enabling or disabling the IGA1/IGA2 clocks causes occasional stability problems during suspend/resume cycles on this platform. This is rather odd, as the documentation suggests that clocks have two states (on/off) and the default (stable) configuration is configured to enable the clock only when it is needed. However, explicitly enabling *or* disabling the clock triggers this system instability, suggesting that there is a 3rd state at play here. Leaving the clock enable/disable registers alone solves this problem. This fixes spurious reboots during suspend/resume behaviour introduced by commit b692a63a. Signed-off-by:
Daniel Drake <dsd@laptop.org> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
Alexander Holler authored
commit b8c4321f upstream. Line 0 and 1 were both written to line 0 (on the display) and all subsequent lines had an offset of -1. The result was that the last line on the display was never overwritten by writes to /dev/fbN. Signed-off-by:
Alexander Holler <holler@ahsoftware.de> Acked-by:
Bernie Thompson <bernie@plugable.com> Signed-off-by:
-
Matthew Garrett authored
commit c99af375 upstream. Cloudlinux have a product called lve that includes a kernel module. This was previously GPLed but is now under a proprietary license, but the module continues to declare MODULE_LICENSE("GPL") and makes use of some EXPORT_SYMBOL_GPL symbols. Forcibly taint it in order to avoid this. Signed-off-by:
Matthew Garrett <mjg59@srcf.ucam.org> Cc: Alex Lyashkov <umka@cloudlinux.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Ian Kent authored
commit 49999ab2 upstream. In autofs4_d_automount(), if a mount fail occurs the AUTOFS_INF_PENDING mount pending flag is not cleared. One effect of this is when using the "browse" option, directory entry attributes show up with all "?"s due to the incorrect callback and subsequent failure return (when in fact no callback should be made). Signed-off-by:
Ian Kent <ikent@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Tejun Heo authored
commit 60ea8226 upstream. A queue newly allocated with blk_alloc_queue_node() has only QUEUE_FLAG_BYPASS set. For request-based drivers, blk_init_allocated_queue() is called and q->queue_flags is overwritten with QUEUE_FLAG_DEFAULT which doesn't include BYPASS even though the initial bypass is still in effect. In blk_init_allocated_queue(), or QUEUE_FLAG_DEFAULT to q->queue_flags instead of overwriting. Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit cd0608e7 upstream. The hypervisor will trap it. However without this patch, we would crash as the .read_tscp is set to NULL. This patch fixes it and sets it to the native_read_tscp call. Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit 1a7bbda5 upstream. We actually do not do anything about it. Just return a default value of zero and if the kernel tries to write anything but 0 we BUG_ON. This fixes the case when an user tries to suspend the machine and it blows up in save_processor_state b/c 'read_cr8' is set to NULL and we get: kernel BUG at /home/konrad/ssd/linux/arch/x86/include/asm/paravirt.h:100! invalid opcode: 0000 [#1] SMP Pid: 2687, comm: init.late Tainted: G O 3.6.0upstream-00002-gac264ac-dirty #4 Bochs Bochs RIP: e030:[<ffffffff814d5f42>] [<ffffffff814d5f42>] save_processor_state+0x212/0x270 .. snip.. Call Trace: [<ffffffff810733bf>] do_suspend_lowlevel+0xf/0xac [<ffffffff8107330c>] ? x86_acpi_suspend_lowlevel+0x10c/0x150 [<ffffffff81342ee2>] acpi_suspend_enter+0x57/0xd5 Signed-off-by:
-
Trond Myklebust authored
commit a519fc7a upstream. Instead of doing a shutdown() call, we need to do an actual close(). Ditto if/when the server is sending us junk RPC headers. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by:
Simon Kirby <sim@hostway.ca> Signed-off-by:
-
Stefan Richter authored
commit 790198f7 upstream. Fix two bugs of the /dev/fw* character device concerning the FW_CDEV_IOC_GET_INFO ioctl with nonzero fw_cdev_get_info.bus_reset. (Practically all /dev/fw* clients issue this ioctl right after opening the device.) Both bugs are caused by sizeof(struct fw_cdev_event_bus_reset) being 36 without natural alignment and 40 with natural alignment. 1) Memory corruption, affecting i386 userland on amd64 kernel: Userland reserves a 36 bytes large buffer, kernel writes 40 bytes. This has been first found and reported against libraw1394 if compiled with gcc 4.7 which happens to order libraw1394's stack such that the bug became visible as data corruption. 2) Information leak, affecting all kernel architectures except i386: 4 bytes of random kernel stack data were leaked to userspace. Hence limit the respective copy_to_user() to the 32-bit aligned size of struct fw_cdev_event_bus_reset. Reported-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Simon Horman authored
commit 7253b85c upstream. arm: Add ARM ERRATA 775420 workaround Workaround for the 775420 Cortex-A9 (r2p2, r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance operation aborts with MMU exception, it might cause the processor to deadlock. This workaround puts DSB before executing ISB if an abort may occur on cache maintenance. Based on work by Kouei Abe and feedback from Catalin Marinas. Signed-off-by:
Kouei Abe <kouei.abe.cp@rms.renesas.com> [ horms@verge.net.au: Changed to implementation suggested by catalin.marinas@arm.com ] Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Hugh Dickins authored
commit 35c2a7f4 upstream. Fuzzing with trinity oopsed on the 1st instruction of shmem_fh_to_dentry(), u64 inum = fid->raw[2]; which is unhelpfully reported as at the end of shmem_alloc_inode(): BUG: unable to handle kernel paging request at ffff880061cd3000 IP: [<ffffffff812190d0>] shmem_alloc_inode+0x40/0x40 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Call Trace: [<ffffffff81488649>] ? exportfs_decode_fh+0x79/0x2d0 [<ffffffff812d77c3>] do_handle_open+0x163/0x2c0 [<ffffffff812d792c>] sys_open_by_handle_at+0xc/0x10 [<ffffffff83a5f3f8>] tracesys+0xe1/0xe6 Right, tmpfs is being stupid to access fid->raw[2] before validating that fh_len includes it: the buffer kmalloc'ed by do_sys_name_to_handle() may fall at the end of a page, and the next page not be present. But some other filesystems (ceph, gfs2, isofs, reiserfs, xfs) are being careless about fh_len too, in fh_to_dentry() and/or fh_to_parent(), and could oops in the same way: add the missing fh_len checks to those. Reported-by:
Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Sage Weil <sage@inktank.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jason Wessel authored
commit f0a996ee upstream. This fault was detected using the kgdb test suite on boot and it crashes recursively due to the fact that CONFIG_KPROBES on mips adds an extra die notifier in the page fault handler. The crash signature looks like this: kgdbts:RUN bad memory access test KGDB: re-enter exception: ALL breakpoints killed Call Trace: [<807b7548>] dump_stack+0x20/0x54 [<807b7548>] dump_stack+0x20/0x54 The fix for now is to have kgdb return immediately if the fault type is DIE_PAGE_FAULT and allow the kprobe code to decide what is supposed to happen. Signed-off-by:
Jason Wessel <jason.wessel@windriver.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Feng Tang authored
commit 67bfa9b6 upstream. By enlarging the GPE storm threshold back to 20, that laptop's EC works fine with interrupt mode instead of polling mode. https://bugzilla.kernel.org/show_bug.cgi?id=45151Reported-and-Tested-by:
Francesco <trentini@dei.unipd.it> Signed-off-by:
Feng Tang <feng.tang@intel.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Feng Tang authored
commit a520d52e upstream. The Linux EC driver includes a mechanism to detect GPE storms, and switch from interrupt-mode to polling mode. However, polling mode sometimes doesn't work, so the workaround is problematic. Also, different systems seem to need the threshold for detecting the GPE storm at different levels. ACPI_EC_STORM_THRESHOLD was initially 20 when it's created, and was changed to 8 in 2.6.28 commit 06cf7d3c "ACPI: EC: lower interrupt storm threshold" to fix kernel bug 11892 by forcing the laptop in that bug to work in polling mode. However in bug 45151, it works fine in interrupt mode if we lift the threshold back to 20. This patch makes the threshold a module parameter so that user has a flexible option to debug/workaround this issue. The default is unchanged. This is also a preparation patch to fix specific systems: https://bugzilla.kernel.org/show_bug.cgi?id=45151Signed-off-by:
-
Stanislav Kinsbursky authored
commit 303a7ce9 upstream. Taking hostname from uts namespace if not safe, because this cuold be performind during umount operation on child reaper death. And in this case current->nsproxy is NULL already. Signed-off-by:
Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by:
-
Russell King authored
commit 846a1368 upstream. Michael Olbrich reported that his test program fails when built with -O2 -mcpu=cortex-a8 -mfpu=neon, and a kernel which supports v6 and v7 CPUs: volatile int x = 2; volatile int64_t y = 2; int main() { volatile int a = 0; volatile int64_t b = 0; while (1) { a = (a + x) % (1 << 30); b = (b + y) % (1 << 30); assert(a == b); } } and two instances are run. When built for just v7 CPUs, this program works fine. It uses the "vadd.i64 d19, d18, d16" VFP instruction. It appears that we do not save the high-16 double VFP registers across context switches when the kernel is built for v6 CPUs. Fix that. Tested-By:
Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by:
-
- 12 Oct, 2012 1 commit
-
-
Greg Kroah-Hartman authored
-
