- 21 Oct, 2020 27 commits
-
-
Ben Gardon authored
Separate the functions for generating leaf page table entries from the function that inserts them into the paging structure. This refactoring will facilitate changes to the MMU sychronization model to use atomic compare / exchanges (which are not guaranteed to succeed) instead of a monolithic MMU lock. No functional change expected. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This commit introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by:
Ben Gardon <bgardon@google.com> Reviewed-by:
Peter Shier <pshier@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Ben Gardon authored
The TDP MMU page fault handler will need to be able to create non-leaf SPTEs to build up the paging structures. Rather than re-implementing the function, factor the SPTE creation out of link_shadow_page. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538Signed-off-by:
-
Paolo Bonzini authored
Pick up bugfixes from 5.9, otherwise various tests fail.
-
Joe Perches authored
This should be const, so make it so. Signed-off-by:
Joe Perches <joe@perches.com> Message-Id: <d130e88dd4c82a12d979da747cc0365c72c3ba15.1601770305.git.joe@perches.com> Signed-off-by:
-
Lai Jiangshan authored
Add FSGSBASE to the set of possible guest-owned CR4 bits, i.e. let the guest own it on VMX. KVM never queries the guest's CR4.FSGSBASE value, thus there is no reason to force VM-Exit on FSGSBASE being toggled. Note, because FSGSBASE is conditionally available, this is dependent on recent changes to intercept reserved CR4 bits and to update the CR4 guest/host mask in response to guest CPUID changes. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Lai Jiangshan <laijs@linux.alibaba.com> [sean: added justification in changelog] Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200930041659.28181-6-sean.j.christopherson@intel.com> Signed-off-by:
-
Sean Christopherson authored
Intercept CR4 bits that are guest reserved so that KVM correctly injects a #GP fault if the guest attempts to set a reserved bit. If a feature is supported by the CPU but is not exposed to the guest, and its associated CR4 bit is not intercepted by KVM by default, then KVM will fail to inject a #GP if the guest sets the CR4 bit without triggering an exit, e.g. by toggling only the bit in question. Note, KVM doesn't give the guest direct access to any CR4 bits that are also dependent on guest CPUID. Yet. Signed-off-by:
-
Sean Christopherson authored
Now that vcpu_after_set_cpuid() and update_exception_bitmap() are called back-to-back, subsume the exception bitmap update into the common CPUID update. Drop the SVM invocation entirely as SVM's exception bitmap doesn't vary with respect to guest CPUID. Signed-off-by:
-
Sean Christopherson authored
Move the call to kvm_x86_ops.vcpu_after_set_cpuid() to the very end of kvm_vcpu_after_set_cpuid() to allow the vendor implementation to react to changes made by the common code. In the near future, this will be used by VMX to update its CR4 guest/host masks to account for reserved bits. In the long term, SGX support will update the allowed XCR0 mask for enclaves based on the vCPU's allowed XCR0. vcpu_after_set_cpuid() (nee kvm_update_cpuid()) was originally added by commit 2acf923e ("KVM: VMX: Enable XSAVE/XRSTOR for guest"), and was called separately after kvm_x86_ops.vcpu_after_set_cpuid() (nee kvm_x86_ops->cpuid_update()). There is no indication that the placement of the common code updates after the vendor updates was anything more than a "new function at the end" decision. Inspection of the current code reveals no dependency on kvm_x86_ops' vcpu_after_set_cpuid() in kvm_vcpu_after_set_cpuid() or any of its helpers. The bulk of the common code depends only on the guest's CPUID configuration, kvm_mmu_reset_context() does not consume dynamic vendor state, and there are no collisions between kvm_pmu_refresh() and VMX's update of PT state. Signed-off-by:
-
Lai Jiangshan authored
Unconditionally intercept changes to CR4.LA57 so that KVM correctly injects a #GP fault if the guest attempts to set CR4.LA57 when it's supported in hardware but not exposed to the guest. Long term, KVM needs to properly handle CR4 bits that can be under guest control but also may be reserved from the guest's perspective. But, KVM currently sets the CR4 guest/host mask only during vCPU creation, and reworking flows to change that will take a bit of elbow grease. Even if/when generic support for intercepting reserved bits exists, it's probably not worth letting the guest set CR4.LA57 directly. LA57 can't be toggled while long mode is enabled, thus it's all but guaranteed to be set once (maybe twice, e.g. by BIOS and kernel) during boot and never touched again. On the flip side, letting the guest own CR4.LA57 may incur extra VMREADs. In other words, this temporary "hack" is probably also the right long term fix. Fixes: fd8cb433 ("KVM: MMU: Expose the LA57 feature to VM.") Cc: stable@vger.kernel.org Cc: Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by:
-
Suravee Suthikulpanit authored
The function amd_ir_set_vcpu_affinity makes use of the parameter struct amd_iommu_pi_data.prev_ga_tag to determine if it should delete struct amd_iommu_pi_data from a list when not running in AVIC mode. However, prev_ga_tag is initialized only when AVIC is enabled. The non-zero uninitialized value can cause unintended code path, which ends up making use of the struct vcpu_svm.ir_list and ir_list_lock without being initialized (since they are intended only for the AVIC case). This triggers NULL pointer dereference bug in the function vm_ir_list_del with the following call trace: svm_update_pi_irte+0x3c2/0x550 [kvm_amd] ? proc_create_single_data+0x41/0x50 kvm_arch_irq_bypass_add_producer+0x40/0x60 [kvm] __connect+0x5f/0xb0 [irqbypass] irq_bypass_register_producer+0xf8/0x120 [irqbypass] vfio_msi_set_vector_signal+0x1de/0x2d0 [vfio_pci] vfio_msi_set_block+0x77/0xe0 [vfio_pci] vfio_pci_set_msi_trigger+0x25c/0x2f0 [vfio_pci] vfio_pci_set_irqs_ioctl+0x88/0xb0 [vfio_pci] vfio_pci_ioctl+0x2ea/0xed0 [vfio_pci] ? alloc_file_pseudo+0xa5/0x100 vfio_device_fops_unl_ioctl+0x26/0x30 [vfio] ? vfio_device_fops_unl_ioctl+0x26/0x30 [vfio] __x64_sys_ioctl+0x96/0xd0 do_syscall_64+0x37/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Therefore, initialize prev_ga_tag to zero before use. This should be safe because ga_tag value 0 is invalid (see function avic_vm_init). Fixes: dfa20099 ("KVM: SVM: Refactor AVIC vcpu initialization into avic_init_vcpu()") Signed-off-by:Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20201003232707.4662-1-suravee.suthikulpanit@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Maxim Levitsky authored
This way we don't waste memory on VMs which don't use nesting virtualization even when the host enabled it for them. Signed-off-by:
Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20201001112954.6258-5-mlevitsk@redhat.com> Signed-off-by:
-
Maxim Levitsky authored
This will be used to signal an error to the userspace, in case the vendor code failed during handling of this msr. (e.g -ENOMEM) Signed-off-by:
-
Maxim Levitsky authored
This will allow the KVM to report such errors (e.g -ENOMEM) to the userspace. Signed-off-by:
-
Maxim Levitsky authored
Return 1 on errors that are caused by wrong guest behavior (which will inject #GP to the guest) And return a negative error value on issues that are the kernel's fault (e.g -ENOMEM) Signed-off-by:
-
Joe Perches authored
These should be const, so make it so. Signed-off-by:
-
Vitaly Kuznetsov authored
As vcpu->arch.cpuid_entries is now allocated dynamically, the only remaining use for KVM_MAX_CPUID_ENTRIES is to check KVM_SET_CPUID/ KVM_SET_CPUID2 input for sanity. Since it was reported that the current limit (80) is insufficient for some CPUs, bump KVM_MAX_CPUID_ENTRIES and use an arbitrary value '256' as the new limit. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20201001130541.1398392-4-vkuznets@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
The current limit for guest CPUID leaves (KVM_MAX_CPUID_ENTRIES, 80) is reported to be insufficient but before we bump it let's switch to allocating vcpu->arch.cpuid_entries[] array dynamically. Currently, 'struct kvm_cpuid_entry2' is 40 bytes so vcpu->arch.cpuid_entries is 3200 bytes which accounts for 1/4 of the whole 'struct kvm_vcpu_arch' but having it pre-allocated (for all vCPUs which we also pre-allocate) gives us no real benefits. Another plus of the dynamic allocation is that we now do kvm_check_cpuid() check before we assign anything to vcpu->arch.cpuid_nent/cpuid_entries so no changes are made in case the check fails. Opportunistically remove unneeded 'out' labels from kvm_vcpu_ioctl_set_cpuid()/kvm_vcpu_ioctl_set_cpuid2() and return directly whenever possible. Signed-off-by:
-
Vitaly Kuznetsov authored
As a preparatory step to allocating vcpu->arch.cpuid_entries dynamically make kvm_check_cpuid() check work with an arbitrary 'struct kvm_cpuid_entry2' array. Currently, when kvm_check_cpuid() fails we reset vcpu->arch.cpuid_nent to 0 and this is kind of weird, i.e. one would expect CPUIDs to remain unchanged when KVM_SET_CPUID[2] call fails. No functional change intended. It would've been possible to move the updated kvm_check_cpuid() in kvm_vcpu_ioctl_set_cpuid2() and check the supplied input before we start updating vcpu->arch.cpuid_entries/nent but we can't do the same in kvm_vcpu_ioctl_set_cpuid() as we'll have to copy 'struct kvm_cpuid_entry' entries first. The change will be made when vcpu->arch.cpuid_entries[] array becomes allocated dynamically. Suggested-by:
-
Oliver Upton authored
Reviewed-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Oliver Upton <oupton@google.com> Change-Id: I0c6355b09fedf8f9cc4cc5f51be418e2c1c82b7b Message-Id: <20200818152429.1923996-5-oupton@google.com> Signed-off-by:
-
Oliver Upton authored
KVM unconditionally provides PV features to the guest, regardless of the configured CPUID. An unwitting guest that doesn't check KVM_CPUID_FEATURES before use could access paravirt features that userspace did not intend to provide. Fix this by checking the guest's CPUID before performing any paravirtual operations. Introduce a capability, KVM_CAP_ENFORCE_PV_FEATURE_CPUID, to gate the aforementioned enforcement. Migrating a VM from a host w/o this patch to a host with this patch could silently change the ABI exposed to the guest, warranting that we default to the old behavior and opt-in for the new one. Reviewed-by:
Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
-
Oliver Upton authored
Small change to avoid meaningless duplication in the subsequent patch. No functional change intended. Reviewed-by:
-
Oliver Upton authored
No functional change intended. Reviewed-by:
-
Vitaly Kuznetsov authored
KVM was switched to interrupt-based mechanism for 'page ready' event delivery in Linux-5.8 (see commit 2635b5c4 ("KVM: x86: interrupt based APF 'page ready' event delivery")) and #PF (ab)use for 'page ready' event delivery was removed. Linux guest switched to this new mechanism exclusively in 5.9 (see commit b1d40575 ("KVM: x86: Switch KVM guest to using interrupts for page ready APF delivery")) so it is not possible to get #PF for a 'page ready' event even when the guest is running on top of an older KVM (APF mechanism won't be enabled). Update the comment in exc_page_fault() to reflect the new reality. Signed-off-by:
-
Matteo Croce authored
Let KVM_WERROR depend on KVM, so it doesn't show in menuconfig alone. Signed-off-by:
Matteo Croce <mcroce@microsoft.com> Message-Id: <20201001112014.9561-1-mcroce@linux.microsoft.com> Fixes: 4f337faf ("KVM: allow disabling -Werror") Signed-off-by:
-
Li Qiang authored
Fixes: e287d6de ("Documentation: kvm: Convert cpuid.txt to .rst") Signed-off-by:
Li Qiang <liq3ea@163.com> Message-Id: <20201001095333.7611-1-liq3ea@163.com> Signed-off-by:
-
Paolo Bonzini authored
Allowing userspace to intercept reads to x2APIC MSRs when APICV is fully enabled for the guest simply can't work. But more in general, the LAPIC could be set to in-kernel after the MSR filter is setup and allowing accesses by userspace would be very confusing. We could in principle allow userspace to intercept reads and writes to TPR, and writes to EOI and SELF_IPI, but while that could be made it work, it would still be silly. Cc: Alexander Graf <graf@amazon.com> Cc: Aaron Lewis <aaronlewis@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: -
Sean Christopherson authored
Rework the resetting of the MSR bitmap for x2APIC MSRs to ignore userspace filtering. Allowing userspace to intercept reads to x2APIC MSRs when APICV is fully enabled for the guest simply can't work; the LAPIC and thus virtual APIC is in-kernel and cannot be directly accessed by userspace. To keep things simple we will in fact forbid intercepting x2APIC MSRs altogether, independent of the default_allow setting. Cc: Alexander Graf <graf@amazon.com> Cc: Aaron Lewis <aaronlewis@google.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by:
-
- 20 Oct, 2020 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarmPaolo Bonzini authored
KVM/arm64 updates for Linux 5.10 - New page table code for both hypervisor and guest stage-2 - Introduction of a new EL2-private host context - Allow EL2 to have its own private per-CPU variables - Support of PMU event filtering - Complete rework of the Spectre mitigation
-
- 19 Oct, 2020 1 commit
-
-
Peter Xu authored
Fix an inverted flag for intercepting x2APIC MSRs and intercept writes by default, even when APICV is enabled. Fixes: 3eb90017 ("KVM: x86: VMX: Prevent MSR passthrough when MSR access is denied") Co-developed-by:
Peter Xu <peterx@redhat.com> [sean: added changelog] Signed-off-by:
-
- 03 Oct, 2020 2 commits
-
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/arm64 fixes for 5.9, take #3 - Fix synchronization of VTTBR update on TLB invalidation for nVHE systems
-
Paolo Bonzini authored
The PFEC_MASK and PFEC_MATCH fields in the VMCS reverse the meaning of the #PF intercept bit in the exception bitmap when they do not match. This means that, if PFEC_MASK and/or PFEC_MATCH are set, the hypervisor can get a vmexit for #PF exceptions even when the corresponding bit is clear in the exception bitmap. This is unexpected and is promptly detected by a WARN_ON_ONCE. To fix it, reset PFEC_MASK and PFEC_MATCH when the #PF intercept is disabled (as is common with enable_ept && !allow_smaller_maxphyaddr). Reported-by:
Qian Cai <cai@redhat.com>> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by:
-
- 02 Oct, 2020 4 commits
-
-
Marc Zyngier authored
Signed-off-by:Marc Zyngier <maz@kernel.org>
-
Will Deacon authored
If a change in the MMU notifier sequence number forces user_mem_abort() to return early when attempting to handle a stage-2 fault, we return uninitialised stack to kvm_handle_guest_abort(), which could potentially result in the injection of an external abort into the guest or a spurious return to userspace. Neither or these are what we want to do. Initialise 'ret' to 0 in user_mem_abort() so that bailing due to a change in the MMU notrifier sequence number is treated as though the fault was handled. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
Alexandru Elisei <alexandru.elisei@arm.com> Reviewed-by:
Gavin Shan <gshan@redhat.com> Cc: Gavin Shan <gshan@redhat.com> Cc: Alexandru Elisei <alexandru.elisei@arm.com> Link: https://lore.kernel.org/r/20200930102442.16142-1-will@kernel.org
-
Will Deacon authored
Alex pointed out that we don't pass a level hint to the TLBI instruction when handling a stage-2 permission fault, even though the walker does at some point have the level information in its hands. Rework stage2_update_leaf_attrs() so that it can optionally return the level of the updated pte to its caller, which can in turn be used to provide the correct TLBI level hint. Reported-by:
-
Mauro Carvalho Chehab authored
As warned with make htmldocs: .../Documentation/virt/kvm/devices/vcpu.rst:70: WARNING: Malformed table. Text in column margin in table line 2. ======= ====================================================== -ENODEV: PMUv3 not supported or GIC not initialized -ENXIO: PMUv3 not properly configured or in-kernel irqchip not configured as required prior to calling this attribute -EBUSY: PMUv3 already initialized -EINVAL: Invalid filter range ======= ====================================================== The ':' character for two lines are above the size of the column. Besides that, other tables at the file doesn't use ':', so just drop them. While here, also fix this warning also introduced at the same patch: .../Documentation/virt/kvm/devices/vcpu.rst:88: WARNING: Block quote ends without a blank line; unexpected unindent. By marking the C code as a literal block. Fixes: 8be86a5e ("KVM: arm64: Document PMU filtering API") Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
- 01 Oct, 2020 1 commit
-
-
Marc Zyngier authored
Commit a0e50aa3 ("KVM: arm64: Factor out stage 2 page table data from struct kvm") dropped the ISB after __load_guest_stage2(), only leaving the one that is required when the speculative AT workaround is in effect. As Andrew points it: "This alternative is 'backwards' to avoid a double ISB as there is one in __load_guest_stage2 when the workaround is active." Restore the missing ISB, conditionned on the AT workaround not being active. Fixes: a0e50aa3 ("KVM: arm64: Factor out stage 2 page table data from struct kvm") Reported-by:
Andrew Scull <ascull@google.com> Reported-by:
Thomas Tai <thomas.tai@oracle.com> Signed-off-by:
-
- 30 Sep, 2020 4 commits
-
-
Marc Zyngier authored
Signed-off-by: -
Marc Zyngier authored
Signed-off-by: -
David Brazdil authored
With all nVHE per-CPU variables being part of the hyp per-CPU region, mapping them individual is not necessary any longer. They are mapped to hyp as part of the overall per-CPU region. Signed-off-by:
David Brazdil <dbrazdil@google.com> Signed-off-by:
-
David Brazdil authored
Add hyp percpu section to linker script and rename the corresponding ELF sections of hyp/nvhe object files. This moves all nVHE-specific percpu variables to the new hyp percpu section. Allocate sufficient amount of memory for all percpu hyp regions at global KVM init time and create corresponding hyp mappings. The base addresses of hyp percpu regions are kept in a dynamically allocated array in the kernel. Add NULL checks in PMU event-reset code as it may run before KVM memory is initialized. Signed-off-by:
-
