- 27 Jun, 2006 2 commits
-
-
James Smart authored
This removes the duplicate functionality which had been added to the lpfc driver. Signed-off-by:
James Smart <James.Smart@emulex.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
James Smart authored
The scsi midlayer portion of the patch Signed-off-by:
-
- 26 Jun, 2006 38 commits
-
-
Salyzyn, Mark authored
This may seem like a DILLIGAF, but after chatting with the F/W folks, there is no harm in dropping the page calculation as denoted in the enclosed patch for these older adapters in this new age of 4GB+ memory sticks. Any resource optimization within the old-old-old adapters for systems with less than 4G of memory is of little consequence. The existing AAC_QUIRK_31BIT flag in linit.c should look after the rest of the legacy hardware DMA limitations. Signed-off-by:
Mark Salyzyn <aacraid@adaptec.com> Signed-off-by:
-
Matt Mackall authored
The scsi layer is already calling add_disk_randomness in scsi_end_request. Signed-off-by:
Matt Mackall <mpm@selenic.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Alan Cox authored
We currently stuff a truncated size into the geometry logic and return the result which can produce bizarre reports for a 4Tb array. Since that mapping logic isn't useful for disks that big don't try and map this way at all. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
GOTO Masanori authored
Add scsi_add_host() failure handling for nsp32 and silence warning. drivers/scsi/nsp32.c:2888: warning: ignoring return value of 'Scsi_add_host', declared with attribute warn_unused_result Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
GOTO Masanori <gotom@sanori.org> Signed-off-by:
-
Randy Dunlap authored
From: Randy Dunlap <rdunlap@xenotime.net> Fix sparse warnings: use NULL instead of 0 for pointers: drivers/scsi/lpfc/lpfc_els.c:827:56: warning: Using plain integer as NULL pointer drivers/scsi/lpfc/lpfc_els.c:2781:18: warning: Using plain integer as NULL pointer drivers/scsi/lpfc/lpfc_els.c:2782:18: warning: Using plain integer as NULL pointer drivers/scsi/lpfc/lpfc_init.c:951:21: warning: Using plain integer as NULL pointer drivers/scsi/lpfc/lpfc_init.c:956:20: warning: Using plain integer as NULL pointer Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
Original code incorrectly assigned it to the driver's link-down-timeout value (a value in seconds). Signed-off-by:
-
Andrew Vasquez authored
Also remove qla2xxx_probe_one/qla2xxx_remove_one stubs previously used with external firmware module loaders. Signed-off-by:
-
Andrew Vasquez authored
As there is no point in failing the initialization process when firmware informs the host software that it could not transition beyond a CONFIG_WAIT nor WAIT_FOR_LOGIN state. Previous logic would mark such conditions as a general *failure* and subsequently tear-down the scsi-host during initialization. Signed-off-by:
-
Andrew Vasquez authored
Similar in form to QLogic's standard offering -- via the 'extended_error_logging' module parameter. Signed-off-by:
-
Andrew Vasquez authored
- macro usage statements should terminate with a ';' - remove unused macros. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
The host section of ISP24xx NVRAMs contain a new bit which allows a user to selectively disable ports of an HBA. These ports (hosts) will not be presented to the midlayer. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
- Defer firmware dump-data raw-to-textual conversion to user-space. - Add module parameter (ql2xallocfwdump) to allow for per-HBA allocations of firmware dump memory. - Dump request and response queue data as per firmware group request. - Add extended firmware trace support for ISP24XX/ISP54XX chips. Signed-off-by:
-
Alan Stern authored
We have to be able to remove SCSI devices even when they are suspended, so QUIESCE -> CANCEL must be a legal state transition. This patch (as727) adds the transition to the state machine. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Luben Tuikov authored
This patch simplifies "good_bytes" computation in sd_rw_intr(). sd: "good_bytes" computation is always done in terms of the resolution of the device's medium, since after that it is the number of good bytes we pass around and other layers/contexts (as opposed ot sd) can translate that to their own resolution (block layer:512). It also makes scsi_io_completion() processing more straightforward, eliminating the 3rd argument to the function. It also fixes a couple of bugs like not checking return value, using "break" instead of "return;", etc. I've been running with this patch for some time now on a test (do-it-all) system. Signed-off-by:
Luben Tuikov <ltuikov@yahoo.com> Signed-off-by:
-
Hannes Reinecke authored
Even with the latest fixes aic79xx still occasionally triggers the BUG_ON in slave_destroy. Rather than trying to figure out the various levels of interaction here I've decided to remove the callback altogether. The primary reason for the slave_alloc / slave_destroy is to keep an index of pointers to the sdevs associated with a given target. However, by changing the arguments to the affected functions slightly it's possible to avoid the use of that index entirely. The only performance penalty we'll incur is in writing the information for /proc/scsi/XXX, as we'll have to recurse over all available sdevs to find the correct ones. But I doubt that reading from /proc is in any way time-critical. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Hannes Reinecke authored
According to Anthony Cheung all HP XP arrays with "OPEN-" types support REPORT_LUN. So there is no reason why we shouldn't use it. Signed-off-by:
Anthony Cheung <anthony.cheung@hp.com> Signed-off-by:
-
Sumant Patro authored
The patch adds support for a ZCR controller (Device ID : 0x413). It also has a critical bug fix : Disable controller interrupt before firing INIT cmd to FW. Interrupt is enabled after required initialization is over. This is done to ensure that driver is ready to handle interrupts when it is generated by the controller. Signed-off-by:
Sumant Patro <Sumant.Patro@lsil.com> Signed-off-by:
-
Dave C Boutcher authored
This patch fixes a condition where ibmvscsi treats a transport error as a "busy" condition, so no errors were returned to the scsi mid-layer. In a RAID environment this means that I/O hung rather than failing over. Signed-off-by: -
Douglas Gilbert authored
- add 'virtual_gb' parameter to simulate large storage (by wrapping in dev_size_mb megabytes of actual ram) - add 'no_lun_0' parameter to skip lun 0 on each target (but still respond as required to INQUIRY + REPORT LUNS) - add well know lu support - add MODE SELECT commands support [pages: 0xa and 0x1c] - add LOG SENSE command support [pages: 0xd and 0x2f] - add READ CAPACITY (16) support - increase number of mode pages supported (to read), mainly transport specific (SAS) mode (sub)pages - add more VPD pages and extend others, including ATA information VPD page - START STOP UNIT now maintains a state machine - READ (16) and WRITE (16) cope with lbas larger than 32 bits (needed for the 'virtual_gb' parameter) - allow single command transfers up to 32 MB - more precise error (sense data) messages Signed-off-by:Douglas Gilbert <dougg@torque.net> Signed-off-by:
-
Dave Jones authored
On Wed, Jun 21, 2006 at 07:00:34PM +0000, Linux Kernel wrote: > commit 67d59dfd > tree ae85703651d81740f4a6cd398f9dd4d6aabe6a2f > parent 6db874fb > author James Bottomley <James.Bottomley@steeleye.com> Wed, 14 Jun 2006 07:31:19 -0500 > committer James Bottomley <jejb@mulgrave.il.steeleye.com> Tue, 20 Jun 2006 05:34:01 -0500 > > [SCSI] 53c700: remove reliance on deprecated cmnd fields > ... > > + SDp->hostdata = kmalloc(GFP_KERNEL, sizeof(struct NCR_700_sense)); > + > + if (!SDp->hostdata) > + return -ENOMEM; "I'll take reversed arguments for $100 please Alex". Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Malcolm Parsons authored
binfmt_flat.c calls set_personality with PER_LINUX as the personality. On the arm architecture this results in the program running in 26bit usermode. PER_LINUX_32BIT should be used instead. This doesn't affect other architectures that use binfmt_flat. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Change enable_irq() macro to be a statement, not expression. Signed-off-by:
-
Greg Ungerer authored
Fix PLL setting for the Coldfire 5249 CPU. This brings it into line with the new style frequency configuration of m68knommu parts. Signed-off-by:
-
Greg Ungerer authored
Fix flush code for the ColdFire 5206/5206e/5272 cases. Add support for the new ColdFire 532x CPU family Signed-off-by:
-
Philippe De Muyter authored
Here is a patch to the system call handling for 5307/5272/etc to: - fix the strace support (one tested the wrong bit) - make all system calls a little bit faster by inlining set_esp0 and supporting ENOSYS out of the critical path. - remove extraneous spaces Signed-off-by:
-
Greg Ungerer authored
This patch solve a bug triggered by execvp (this function use calloc to store the argument list and gcc 3.4.x align the stack to word, not to dword). This situation aren't related to signal handling and all 2.6.x have the bug. On ColdFire targets we must force the stack to be aligned. Original patch from Andrea Tarani <andrea.tarani@gilbarco.com>, Signed-off-by:
-
Greg Ungerer authored
Remove list of fixed clock frequency options used for configuring master clock, and make field an int. Much more flexible this way, no need to add more options for every new used freqency. Signed-off-by:
-
Greg Ungerer authored
Remove list of fixed clock frequency options used for configuring master clock, and make field an int. Much more flexible this way, no need to add more options for every new used freqency. Signed-off-by:
-
Greg Ungerer authored
Add support for the AVNET 5282 board. Patch submitted by Daniel Alomar <dalomar@serrasold.com>. Signed-off-by:
-
Greg Ungerer authored
Add configure support for the new Freescale 532x family of CPUs. Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>. Signed-off-by:
-
Linus Torvalds authored
This reverts commits 3e3318de [PATCH] swsusp: x86_64 mark special saveable/unsaveable pages b6370d96 [PATCH] swsusp: i386 mark special saveable/unsaveable pages ce4ab001 [PATCH] swsusp: add architecture special saveable pages support because not only do they apparently cause page faults on x86, the infrastructure doesn't compile on powerpc. Signed-off-by:
-
Greg Ungerer authored
Add build support for the new Freescale 532x CPU platforms. Signed-off-by:
-
