- 30 Jul, 2020 17 commits
-
-
Atish Patra authored
The trap vector is set only in trap_init which may be too late in some cases. Early ioremap/efi spits many warning messages which may be useful. Setup the trap vector early so that any warning/bug can be handled before generic code invokes trap_init. Signed-off-by:
Atish Patra <atish.patra@wdc.com> Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com>
-
Emil Renner Berthing authored
This allows the pgtable tests to be built. Signed-off-by:
Emil Renner Berthing <kernel@esmil.dk> Signed-off-by:
-
Pekka Enberg authored
The <linux/pgtable.h> header now defines generic pgprot_ macros also for the no-MMU configuration, so let's use them. Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Pekka Enberg authored
The <linux/pgtable.h> header defines some generic pgprot_* implementations, but they are only available when CONFIG_MMU is enabled. The RISC-V architecture, for example, therefore defines some of these pgprot_* macros for !NOMMU. Let's make the pgprot_* generic available even for !NOMMU so we can remove the RISC-V specific definitions. Compile-tested with x86 defconfig, and riscv defconfig and !MMU defconfig. Suggested-by:
Mike Rapoport <rppt@linux.ibm.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Guo Ren authored
- TASK_THREAD_SP is duplicated define - TASK_STACK is no use at all - Don't worry about thread_info's offset in task_struct, have a look on comment in include/linux/sched.h: struct task_struct { /* * For reasons of header soup (see current_thread_info()), this * must be the first element of task_struct. */ struct thread_info thread_info; Signed-off-by:Guo Ren <guoren@linux.alibaba.com> Signed-off-by:
-
Emil Renner Berthing authored
Add jump-label implementation based on the ARM64 version and add CONFIG_JUMP_LABEL=y to the defconfigs. Signed-off-by:
Björn Töpel <bjorn.topel@gmail.com> Tested-by:
-
Emil Renner Berthing authored
These are needed for the __jump_table in modules using static keys/jump-labels with the layout from HAVE_ARCH_JUMP_LABEL_RELATIVE on 64bit kernels. Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
Guo Ren authored
The -fstack-protector & -fstack-protector-strong features are from gcc. The patch only add basic kernel support to stack-protector feature and some arch could have its own solution such as ARM64_PTR_AUTH. After enabling STACKPROTECTOR and STACKPROTECTOR_STRONG, the .text size is expanded from 0x7de066 to 0x81fb32 (only 5%) to add canary checking code. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Tobias Klauser authored
s/userpsace/userspace/ Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Tobias Klauser authored
Tested using syzkaller in QEMU's riscv64 virt machine. Signed-off-by:
-
Tobias Klauser authored
Add ARCH_HAS_KCOV and HAVE_GCC_PLUGINS to the riscv Kconfig. Also disable instrumentation of some early boot code and vdso. Boot-tested on QEMU's riscv64 virt machine. Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Greentime Hu authored
This patch implements and enables context tracking for riscv (which is a prerequisite for CONFIG_NO_HZ_FULL support) It adds checking for previous state in the entry that all excepttions and interrupts goes to and calls context_tracking_user_exit() if it comes from user space. It also calls context_tracking_user_enter() if it will return to user space before restore_all. This patch is tested with the dynticks-testing testcase in qemu-system-riscv64 virt machine and Unleashed board. git://git.kernel.org/pub/scm/linux/kernel/git/frederic/dynticks-testing.git We can see the log here. The tick got mostly stopped during the execution of the user loop. _-----=> irqs-off / _----=> need-resched | / _---=> hardirq/softirq || / _--=> preempt-depth ||| / delay TASK-PID CPU# |||| TIMESTAMP FUNCTION | | | |||| | | <idle>-0 [001] d..2 604.183512: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=taskset next_pid=273 next_prio=120 user_loop-273 [001] d.h1 604.184788: hrtimer_expire_entry: hrtimer=000000002eda5fab function=tick_sched_timer now=604176096300 user_loop-273 [001] d.s2 604.184897: workqueue_queue_work: work struct=00000000383402c2 function=vmstat_update workqueue=00000000f36d35d4 req_cpu=1 cpu=1 user_loop-273 [001] dns2 604.185039: tick_stop: success=0 dependency=SCHED user_loop-273 [001] dn.1 604.185103: tick_stop: success=0 dependency=SCHED user_loop-273 [001] d..2 604.185154: sched_switch: prev_comm=taskset prev_pid=273 prev_prio=120 prev_state=R+ ==> next_comm=kworker/1:1 next_pid=46 next_prio=120 <...>-46 [001] .... 604.185194: workqueue_execute_start: work struct 00000000383402c2: function vmstat_update <...>-46 [001] d..2 604.185266: sched_switch: prev_comm=kworker/1:1 prev_pid=46 prev_prio=120 prev_state=I ==> next_comm=taskset next_pid=273 next_prio=120 user_loop-273 [001] d.h1 604.188812: hrtimer_expire_entry: hrtimer=000000002eda5fab function=tick_sched_timer now=604180133400 user_loop-273 [001] d..1 604.189050: tick_stop: success=1 dependency=NONE user_loop-273 [001] d..2 614.251386: sched_switch: prev_comm=user_loop prev_pid=273 prev_prio=120 prev_state=X ==> next_comm=swapper/1 next_pid=0 next_prio=120 <idle>-0 [001] d..2 614.315391: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=taskset next_pid=276 next_prio=120 Signed-off-by:
Greentime Hu <greentime.hu@sifive.com> Signed-off-by:
-
Greentime Hu authored
Support for arch_irq_work_raise() and arch_irq_work_has_interrupt() was missing from riscv (a prerequisite for FULL_NOHZ). Signed-off-by:
-
Guo Ren authored
Lockdep is needed by proving the spinlocks and rwlocks. To suupport it, we need fixup TRACE_IRQFLAGS_SUPPORT in kernel/entry.S. This patch follow Documentation/irqflags-tracing.txt. Signed-off-by:
-
Zong Li authored
The cpu_running is not a lock-class, it lacks the dep_map member in completion. It causes the error as follow: arch/riscv/kernel/smpboot.c: In function '__cpu_up': ./include/linux/lockdep.h:364:52: error: 'struct completion' has no member named 'dep_map' 364 | #define lockdep_is_held(lock) lock_is_held(&(lock)->dep_map) | ^~ ./include/asm-generic/bug.h:113:25: note: in definition of macro 'WARN_ON' 113 | int __ret_warn_on = !!(condition); \ | ^~~~~~~~~ ./include/linux/lockdep.h:390:27: note: in expansion of macro 'lockdep_is_held' 390 | WARN_ON(debug_locks && !lockdep_is_held(l)); \ | ^~~~~~~~~~~~~~~ arch/riscv/kernel/smpboot.c:118:2: note: in expansion of macro 'lockdep_assert_held' 118 | lockdep_assert_held(&cpu_running); There are a lot of archs which use cpu_running in smpboot.c (arm, arm64, openrisc, xtensa, s390, x86, mips), but none of them try lockdep_assert_held(&cpu_running.wait.lock). So Just remove it. Signed-off-by:Zong Li <zong.li@sifive.com> Signed-off-by:
-
Guo Ren authored
When enable LOCKDEP, static_obj() will cause error. Because some __initdata static variables is before _stext: static int static_obj(const void *obj) { unsigned long start = (unsigned long) &_stext, end = (unsigned long) &_end, addr = (unsigned long) obj; /* * static variable? */ if ((addr >= start) && (addr < end)) return 1; [ 0.067192] INFO: trying to register non-static key. [ 0.067325] the code is fine but needs lockdep annotation. [ 0.067449] turning off the locking correctness validator. [ 0.067718] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc7-dirty #44 [ 0.067945] Call Trace: [ 0.068369] [<ffffffe00020323c>] walk_stackframe+0x0/0xa4 [ 0.068506] [<ffffffe000203422>] show_stack+0x2a/0x34 [ 0.068631] [<ffffffe000521e4e>] dump_stack+0x94/0xca [ 0.068757] [<ffffffe000255a4e>] register_lock_class+0x5b8/0x5bc [ 0.068969] [<ffffffe000255abe>] __lock_acquire+0x6c/0x1d5c [ 0.069101] [<ffffffe0002550fe>] lock_acquire+0xae/0x312 [ 0.069228] [<ffffffe000989a8e>] _raw_spin_lock_irqsave+0x40/0x5a [ 0.069357] [<ffffffe000247c64>] complete+0x1e/0x50 [ 0.069479] [<ffffffe000984c38>] rest_init+0x1b0/0x28a [ 0.069660] [<ffffffe0000016a2>] 0xffffffe0000016a2 [ 0.069779] [<ffffffe000001b84>] 0xffffffe000001b84 [ 0.069953] [<ffffffe000001092>] 0xffffffe000001092 static __initdata DECLARE_COMPLETION(kthreadd_done); noinline void __ref rest_init(void) { ... complete(&kthreadd_done); Signed-off-by:
-
- 09 Jul, 2020 1 commit
-
-
Zong Li authored
Add System RAM to /proc/iomem, various tools expect it such as kdump. It is also needed for page_is_ram API which checks the specified address whether registered as System RAM in iomem_resource list. Signed-off-by:
-
- 29 Jun, 2020 2 commits
-
-
Greentime Hu authored
Store the smp_processor_id() in a local variable to save some pointer chasing. Signed-off-by:
-
Chenxi Mao authored
Select ARCH_SUPPORTS_ATOMIC_RMW by default to enable osqlocks. Signed-off-by:
Chenxi Mao <maochenxi@eswin.com> [Palmer: commit text] Signed-off-by:
-
- 28 Jun, 2020 20 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM OMAP fixes from Arnd Bergmann: "The OMAP developers are particularly active at hunting down regressions, so this is a separate branch with OMAP specific fixes for v5.8: As Tony explains "The recent display subsystem (DSS) related platform data changes caused display related regressions for suspend and resume. Looks like I only tested suspend and resume before dropping the legacy platform data, and forgot to test it after dropping it. Turns out the main issue was that we no longer have platform code calling pm_runtime_suspend for DSS like we did for the legacy platform data case, and that fix is still being discussed on the dri-devel list and will get merged separately. The DSS related testing exposed a pile other other display related issues that also need fixing though": - Fix ti-sysc optional clock handling and reset status checks for devices that reset automatically in idle like DSS - Ignore ti-sysc clockactivity bit unless separately requested to avoid unexpected performance issues - Init ti-sysc framedonetv_irq to true and disable for am4 - Avoid duplicate DSS reset for legacy mode with dts data - Remove LCD timings for am4 as they cause warnings now that we're using generic panels Other OMAP changes from Tony include: - Fix omap_prm reset deassert as we still have drivers setting the pm_runtime_irq_safe() flag - Flush posted write for ti-sysc enable and disable - Fix droid4 spi related errors with spi flags - Fix am335x USB range and a typo for softreset - Fix dra7 timer nodes for clocks for IPU and DSP - Drop duplicate mailboxes after mismerge for dra7 - Prevent pocketgeagle header line signal from accidentally setting micro-SD write protection signal by removing the default mux - Fix NFSroot flakeyness after resume for duover by switching the smsc911x gpio interrupt to back to level sensitive - Fix regression for omap4 clockevent source after recent system timer changes - Yet another ethernet regression fix for the "rgmii" vs "rgmii-rxid" phy-mode - One patch to convert am3/am4 DT files to use the regular sdhci-omap driver instead of the old hsmmc driver, this was meant for the merge window but got lost in the process" * tag 'arm-omap-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits) ARM: dts: am5729: beaglebone-ai: fix rgmii phy-mode ARM: dts: Fix omap4 system timer source clocks ARM: dts: Fix duovero smsc interrupt for suspend ARM: dts: am335x-pocketbeagle: Fix mmc0 Write Protect Revert "bus: ti-sysc: Increase max softreset wait" ARM: dts: am437x-epos-evm: remove lcd timings ARM: dts: am437x-gp-evm: remove lcd timings ARM: dts: am437x-sk-evm: remove lcd timings ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag ARM: dts: Fix am33xx.dtsi USB ranges length bus: ti-sysc: Increase max softreset wait ARM: OMAP2+: Fix legacy mode dss_reset bus: ti-sysc: Fix uninitialized framedonetv_irq bus: ti-sysc: Ignore clockactivity unless specified as a quirk bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit ARM: dts: omap4-droid4: Fix spi configuration and increase rate bus: ti-sysc: Flush posted write on enable and disable soc: ti: omap-prm: use atomic iopoll instead of sleeping one ... -
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "Here are a couple of bug fixes, mostly for devicetree files NXP i.MX: - Use correct voltage on some i.MX8M board device trees to avoid hardware damage - Code fixes for a compiler warning and incorrect reference counting, both harmless. - Fix the i.MX8M SoC driver to correctly identify imx8mp - Fix watchdog configuration in imx6ul-kontron device tree. Broadcom: - A small regression fix for the Raspberry-Pi firmware driver - A Kconfig change to use the correct timer driver on Northstar - A DT fix for the Luxul XWC-2000 machine - Two more DT fixes for NSP SoCs STmicroelectronics STI - Revert one broken patch for L2 cache configuration ARM Versatile Express: - Fix a regression by reverting a broken DT cleanup TEE drivers: - MAINTAINERS: change tee mailing list" * tag 'arm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: Revert "ARM: sti: Implement dummy L2 cache's write_sec" soc: imx8m: fix build warning ARM: imx6: add missing put_device() call in imx6q_suspend_init() ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() soc: imx8m: Correct i.MX8MP UID fuse offset ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2 arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range ARM: dts: NSP: Correct FA2 mailbox node ARM: bcm2835: Fix integer overflow in rpi_firmware_print_firmware_revision() MAINTAINERS: change tee mailing list ARM: dts: NSP: Disable PL330 by default, add dma-coherent property ARM: bcm: Select ARM_TIMER_SP804 for ARCH_BCM_NSP ARM: dts: BCM5301X: Add missing memory "device_type" for Luxul XWC-2000 arm: dts: vexpress: Move mcc node back into motherboard node -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Ingo Molnar: "A single DocBook fix" * tag 'timers-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Fix kerneldoc system_device_crosststamp & al
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Ingo Molnar: "A single Kbuild dependency fix" * tag 'perf-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/rapl: Fix RAPL config variable bug
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Ingo Molnar: - Fix build regression on v4.8 and older - Robustness fix for TPM log parsing code - kobject refcount fix for the ESRT parsing code - Two efivarfs fixes to make it behave more like an ordinary file system - Style fixup for zero length arrays - Fix a regression in path separator handling in the initrd loader - Fix a missing prototype warning - Add some kerneldoc headers for newly introduced stub routines - Allow support for SSDT overrides via EFI variables to be disabled - Report CPU mode and MMU state upon entry for 32-bit ARM - Use the correct stack pointer alignment when entering from mixed mode * tag 'efi-urgent-2020-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/libstub: arm: Print CPU boot mode and MMU state at boot efi/libstub: arm: Omit arch specific config table matching array on arm64 efi/x86: Setup stack correctly for efi_pe_entry efi: Make it possible to disable efivar_ssdt entirely efi/libstub: Descriptions for stub helper functions efi/libstub: Fix path separator regression efi/libstub: Fix missing-prototype warning for skip_spaces() efi: Replace zero-length array and use struct_size() helper efivarfs: Don't return -EINTR when rate-limiting reads efivarfs: Update inode modification time for successful writes efi/esrt: Fix reference count leak in esre_create_sysfs_entry. efi/tpm: Verify event log header before parsing efi/x86: Fix build with gcc 4
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Borislav Petkov: "The most anticipated fix in this pull request is probably the horrible build fix for the RANDSTRUCT fail that didn't make -rc2. Also included is the cleanup that removes those BUILD_BUG_ON()s and replaces it with ugly unions. Also included is the try_to_wake_up() race fix that was first triggered by Paul's RCU-torture runs, but was independently hit by Dave Chinner's fstest runs as well" * tag 'sched_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cfs: change initial value of runnable_avg smp, irq_work: Continue smp_call_function*() and irq_work*() integration sched/core: s/WF_ON_RQ/WQ_ON_CPU/ sched/core: Fix ttwu() race sched/core: Fix PI boosting between RT and DEADLINE tasks sched/deadline: Initialize ->dl_boosted sched/core: Check cpus_mask, not cpus_ptr in __set_cpus_allowed_ptr(), to fix mask corruption sched/core: Fix CONFIG_GCC_PLUGIN_RANDSTRUCT build fail
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - AMD Memory bandwidth counter width fix, by Babu Moger. - Use the proper length type in the 32-bit truncate() syscall variant, by Jiri Slaby. - Reinit IA32_FEAT_CTL during wakeup to fix the case where after resume, VMXON would #GP due to VMX not being properly enabled, by Sean Christopherson. - Fix a static checker warning in the resctrl code, by Dan Carpenter. - Add a CR4 pinning mask for bits which cannot change after boot, by Kees Cook. - Align the start of the loop of __clear_user() to 16 bytes, to improve performance on AMD zen1 and zen2 microarchitectures, by Matt Fleming. * tag 'x86_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm/64: Align start of __clear_user() loop to 16-bytes x86/cpu: Use pinning mask for CR4 bits needing to be 0 x86/resctrl: Fix a NULL vs IS_ERR() static checker warning in rdt_cdp_peer_get() x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup syscalls: Fix offset type of ksys_ftruncate() x86/resctrl: Fix memory bandwidth counter width for AMD
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RCU-vs-KCSAN fixes from Borislav Petkov: "A single commit that uses "arch_" atomic operations to avoid the instrumentation that comes with the non-"arch_" versions. In preparation for that commit, it also has another commit that makes these "arch_" atomic operations available to generic code. Without these commits, KCSAN uses can see pointless errors" * tag 'rcu_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Fixup noinstr warnings locking/atomics: Provide the arch_atomic_ interface to generic code
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fixes from Borislav Petkov: "Three fixes from Peter Zijlstra suppressing KCOV instrumentation in noinstr sections. Peter Zijlstra says: "Address KCOV vs noinstr. There is no function attribute to selectively suppress KCOV instrumentation, instead teach objtool to NOP out the calls in noinstr functions" This cures a bunch of KCOV crashes (as used by syzcaller)" * tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix noinstr vs KCOV objtool: Provide elf_write_{insn,reloc}() objtool: Clean up elf_write() condition -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 entry fixes from Borislav Petkov: "This is the x86/entry urgent pile which has accumulated since the merge window. It is not the smallest but considering the almost complete entry core rewrite, the amount of fixes to follow is somewhat higher than usual, which is to be expected. Peter Zijlstra says: 'These patches address a number of instrumentation issues that were found after the x86/entry overhaul. When combined with rcu/urgent and objtool/urgent, these patches make UBSAN/KASAN/KCSAN happy again. Part of making this all work is bumping the minimum GCC version for KASAN builds to gcc-8.3, the reason for this is that the __no_sanitize_address function attribute is broken in GCC releases before that. No known GCC version has a working __no_sanitize_undefined, however because the only noinstr violation that results from this happens when an UB is found, we treat it like WARN. That is, we allow it to violate the noinstr rules in order to get the warning out'" * tag 'x86_entry_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry: Fix #UD vs WARN more x86/entry: Increase entry_stack size to a full page x86/entry: Fixup bad_iret vs noinstr objtool: Don't consider vmlinux a C-file kasan: Fix required compiler version compiler_attributes.h: Support no_sanitize_undefined check with GCC 4 x86/entry, bug: Comment the instrumentation_begin() usage for WARN() x86/entry, ubsan, objtool: Whitelist __ubsan_handle_*() x86/entry, cpumask: Provide non-instrumented variant of cpu_is_offline() compiler_types.h: Add __no_sanitize_{address,undefined} to noinstr kasan: Bump required compiler version x86, kcsan: Add __no_kcsan to noinstr kcsan: Remove __no_kcsan_or_inline x86, kcsan: Remove __no_kcsan_or_inline usage -
Vincent Guittot authored
Some performance regression on reaim benchmark have been raised with commit 070f5e86 ("sched/fair: Take into account runnable_avg to classify group") The problem comes from the init value of runnable_avg which is initialized with max value. This can be a problem if the newly forked task is finally a short task because the group of CPUs is wrongly set to overloaded and tasks are pulled less agressively. Set initial value of runnable_avg equals to util_avg to reflect that there is no waiting time so far. Fixes: 070f5e86 ("sched/fair: Take into account runnable_avg to classify group") Reported-by:
kernel test robot <rong.a.chen@intel.com> Signed-off-by:
Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200624154422.29166-1-vincent.guittot@linaro.org
-
Peter Zijlstra authored
Instead of relying on BUG_ON() to ensure the various data structures line up, use a bunch of horrible unions to make it all automatic. Much of the union magic is to ensure irq_work and smp_call_function do not (yet) see the members of their respective data structures change name. Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Reviewed-by:
Frederic Weisbecker <frederic@kernel.org> Link: https://lkml.kernel.org/r/20200622100825.844455025@infradead.org
-
Peter Zijlstra authored
Use a better name for this poorly named flag, to avoid confusion... Signed-off-by:
Mel Gorman <mgorman@suse.de> Link: https://lkml.kernel.org/r/20200622100825.785115830@infradead.org
-
Peter Zijlstra authored
Paul reported rcutorture occasionally hitting a NULL deref: sched_ttwu_pending() ttwu_do_wakeup() check_preempt_curr() := check_preempt_wakeup() find_matching_se() is_same_group() if (se->cfs_rq == pse->cfs_rq) <-- *BOOM* Debugging showed that this only appears to happen when we take the new code-path from commit: 2ebb1771 ("sched/core: Offload wakee task activation if it the wakee is descheduling") and only when @cpu == smp_processor_id(). Something which should not be possible, because p->on_cpu can only be true for remote tasks. Similarly, without the new code-path from commit: c6e7bd7a ("sched/core: Optimize ttwu() spinning on p->on_cpu") this would've unconditionally hit: smp_cond_load_acquire(&p->on_cpu, !VAL); and if: 'cpu == smp_processor_id() && p->on_cpu' is possible, this would result in an instant live-lock (with IRQs disabled), something that hasn't been reported. The NULL deref can be explained however if the task_cpu(p) load at the beginning of try_to_wake_up() returns an old value, and this old value happens to be smp_processor_id(). Further assume that the p->on_cpu load accurately returns 1, it really is still running, just not here. Then, when we enqueue the task locally, we can crash in exactly the observed manner because p->se.cfs_rq != rq->cfs_rq, because p's cfs_rq is from the wrong CPU, therefore we'll iterate into the non-existant parents and NULL deref. The closest semi-plausible scenario I've managed to contrive is somewhat elaborate (then again, actual reproduction takes many CPU hours of rcutorture, so it can't be anything obvious): X->cpu = 1 rq(1)->curr = X CPU0 CPU1 CPU2 // switch away from X LOCK rq(1)->lock smp_mb__after_spinlock dequeue_task(X) X->on_rq = 9 switch_to(Z) X->on_cpu = 0 UNLOCK rq(1)->lock // migrate X to cpu 0 LOCK rq(1)->lock dequeue_task(X) set_task_cpu(X, 0) X->cpu = 0 UNLOCK rq(1)->lock LOCK rq(0)->lock enqueue_task(X) X->on_rq = 1 UNLOCK rq(0)->lock // switch to X LOCK rq(0)->lock smp_mb__after_spinlock switch_to(X) X->on_cpu = 1 UNLOCK rq(0)->lock // X goes sleep X->state = TASK_UNINTERRUPTIBLE smp_mb(); // wake X ttwu() LOCK X->pi_lock smp_mb__after_spinlock if (p->state) cpu = X->cpu; // =? 1 smp_rmb() // X calls schedule() LOCK rq(0)->lock smp_mb__after_spinlock dequeue_task(X) X->on_rq = 0 if (p->on_rq) smp_rmb(); if (p->on_cpu && ttwu_queue_wakelist(..)) [*] smp_cond_load_acquire(&p->on_cpu, !VAL) cpu = select_task_rq(X, X->wake_cpu, ...) if (X->cpu != cpu) switch_to(Y) X->on_cpu = 0 UNLOCK rq(0)->lock However I'm having trouble convincing myself that's actually possible on x86_64 -- after all, every LOCK implies an smp_mb() there, so if ttwu observes ->state != RUNNING, it must also observe ->cpu != 1. (Most of the previous ttwu() races were found on very large PowerPC) Nevertheless, this fully explains the observed failure case. Fix it by ordering the task_cpu(p) load after the p->on_cpu load, which is easy since nothing actually uses @cpu before this. Fixes: c6e7bd7a ("sched/core: Optimize ttwu() spinning on p->on_cpu") Reported-by:Paul E. McKenney <paulmck@kernel.org> Tested-by:
-
Juri Lelli authored
syzbot reported the following warning: WARNING: CPU: 1 PID: 6351 at kernel/sched/deadline.c:628 enqueue_task_dl+0x22da/0x38a0 kernel/sched/deadline.c:1504 At deadline.c:628 we have: 623 static inline void setup_new_dl_entity(struct sched_dl_entity *dl_se) 624 { 625 struct dl_rq *dl_rq = dl_rq_of_se(dl_se); 626 struct rq *rq = rq_of_dl_rq(dl_rq); 627 628 WARN_ON(dl_se->dl_boosted); 629 WARN_ON(dl_time_before(rq_clock(rq), dl_se->deadline)); [...] } Which means that setup_new_dl_entity() has been called on a task currently boosted. This shouldn't happen though, as setup_new_dl_entity() is only called when the 'dynamic' deadline of the new entity is in the past w.r.t. rq_clock and boosted tasks shouldn't verify this condition. Digging through the PI code I noticed that what above might in fact happen if an RT tasks blocks on an rt_mutex hold by a DEADLINE task. In the first branch of boosting conditions we check only if a pi_task 'dynamic' deadline is earlier than mutex holder's and in this case we set mutex holder to be dl_boosted. However, since RT 'dynamic' deadlines are only initialized if such tasks get boosted at some point (or if they become DEADLINE of course), in general RT 'dynamic' deadlines are usually equal to 0 and this verifies the aforementioned condition. Fix it by checking that the potential donor task is actually (even if temporary because in turn boosted) running at DEADLINE priority before using its 'dynamic' deadline value. Fixes: 2d3d891d ("sched/deadline: Add SCHED_DEADLINE inheritance logic") Reported-by: syzbot+119ba87189432ead09b4@syzkaller.appspotmail.com Signed-off-by:Juri Lelli <juri.lelli@redhat.com> Signed-off-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Tested-by:
Daniel Wagner <dwagner@suse.de> Link: https://lkml.kernel.org/r/20181119153201.GB2119@localhost.localdomain
-
Juri Lelli authored
syzbot reported the following warning triggered via SYSC_sched_setattr(): WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 setup_new_dl_entity /kernel/sched/deadline.c:594 [inline] WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 enqueue_dl_entity /kernel/sched/deadline.c:1370 [inline] WARNING: CPU: 0 PID: 6973 at kernel/sched/deadline.c:593 enqueue_task_dl+0x1c17/0x2ba0 /kernel/sched/deadline.c:1441 This happens because the ->dl_boosted flag is currently not initialized by __dl_clear_params() (unlike the other flags) and setup_new_dl_entity() rightfully complains about it. Initialize dl_boosted to 0. Fixes: 2d3d891d ("sched/deadline: Add SCHED_DEADLINE inheritance logic") Reported-by: syzbot+5ac8bac25f95e8b221e7@syzkaller.appspotmail.com Signed-off-by:
-
Scott Wood authored
This function is concerned with the long-term CPU mask, not the transitory mask the task might have while migrate disabled. Before this patch, if a task was migrate-disabled at the time __set_cpus_allowed_ptr() was called, and the new mask happened to be equal to the CPU that the task was running on, then the mask update would be lost. Signed-off-by:
Scott Wood <swood@redhat.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Peter Zijlstra authored
As a temporary build fix, the proper cleanup needs more work. Reported-by:
Guenter Roeck <linux@roeck-us.net> Reported-by:
Eric Biggers <ebiggers@kernel.org> Suggested-by:
-
Arnd Bergmann authored
Merge tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.8: - Fix LDO1 and LDO2 voltage range for a couple of i.MX8M board device trees. - Fix i.MX8MP UID fuse offset in i.MX8M SoC driver. - Fix watchdog configuration in imx6ul-kontron device tree. - Fix one build warning seen on building soc-imx8m driver with x86_64-randconfig. - Add missing put_device() call for a couple of mach-imx PM functions. * tag 'imx-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx8m: fix build warning ARM: imx6: add missing put_device() call in imx6q_suspend_init() ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram() soc: imx8m: Correct i.MX8MP UID fuse offset ARM: dts: imx6ul-kontron: Change WDOG_ANY signal from push-pull to open-drain ARM: dts: imx6ul-kontron: Move watchdog from Kontron i.MX6UL/ULL board to SoM arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2 arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range Link: https://lore.kernel.org/r/20200624111725.GA24312@dragonSigned-off-by:
Arnd Bergmann <arnd@arndb.de>
-
