- 09 Jul, 2012 6 commits
-
-
Avi Kivity authored
Null SS is valid in long mode; allow loading it. Signed-off-by:Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
Opcode 0F A2. Used by Linux during the mode change trampoline while in a state that is not virtualizable on vmx without unrestricted_guest, so we need to emulate it is emulate_invalid_guest_state=1. Signed-off-by: -
Avi Kivity authored
Instead of getting an exact leaf, follow the spec and fall back to the last main leaf instead. This lets us easily emulate the cpuid instruction in the emulator. Signed-off-by: -
Avi Kivity authored
Introduce kvm_cpuid() to perform the leaf limit check and calculate register values, and let kvm_emulate_cpuid() just handle reading and writing the registers from/to the vcpu. This allows us to reuse kvm_cpuid() in a context where directly reading and writing registers is not desired. Signed-off-by: -
Avi Kivity authored
In protected mode, the CPL is defined as the lower two bits of CS, as set by the last far jump. But during the transition to protected mode, there is no last far jump, so we need to return zero (the inherited real mode CPL). Fix by reading CPL from the cache during the transition. This isn't 100% correct since we don't set the CPL cache on a far jump, but since protected mode transition will always jump to a segment with RPL=0, it will always work. Signed-off-by: -
Avi Kivity authored
Currently the MMU's ->new_cr3() callback does nothing when guest paging is disabled or when two-dimentional paging (e.g. EPT on Intel) is active. This means that an emulated write to cr3 can be lost; kvm_set_cr3() will write vcpu-arch.cr3, but the GUEST_CR3 field in the VMCS will retain its old value and this is what the guest sees. This bug did not have any effect until now because: - with unrestricted guest, or with svm, we never emulate a mov cr3 instruction - without unrestricted guest, and with paging enabled, we also never emulate a mov cr3 instruction - without unrestricted guest, but with paging disabled, the guest's cr3 is ignored until the guest enables paging; at this point the value from arch.cr3 is loaded correctly my the mov cr0 instruction which turns on paging However, the patchset that enables big real mode causes us to emulate mov cr3 instructions in protected mode sometimes (when guest state is not virtualizable by vmx); this mov cr3 is effectively ignored and will crash the guest. The fix is to make nonpaging_new_cr3() call mmu_free_roots() to force a cr3 reload. This is awkward because now all the new_cr3 callbacks to the same thing, and because mmu_free_roots() is somewhat of an overkill; but fixing that is more complicated and will be done after this minimal fix. Observed in the Window XP 32-bit installer while bringing up secondary vcpus. Signed-off-by:
-
- 06 Jul, 2012 1 commit
-
-
Rik van Riel authored
If last_boosted_vcpu == 0, then we fall through all test cases and may end up with all VCPUs pouncing on vcpu 0. With a large enough guest, this can result in enormous runqueue lock contention, which can prevent vcpu0 from running, leading to a livelock. Changing < to <= makes sure we properly handle that case. Signed-off-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com>
-
- 03 Jul, 2012 9 commits
-
-
Cornelia Huck authored
If sigp sense doesn't have any status bits to report, it should set cc 0 and leave the register as-is. Since we know about the external call pending bit, we should report it if it is set as well. Acked-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Just use the defines instead of using plain numbers and adding a comment behind each line. Signed-off-by:
-
Heiko Carstens authored
If an invalid parameter is passed or the addressed cpu is in an incorrect state sigp set prefix will store a status. This status must only have bits set as defined by the architecture. The current kvm implementation missed to clear bits and also did not set the intended status bit ("and" instead of "or" operation). Signed-off-by: -
Heiko Carstens authored
Only if the sensed cpu is not running a status is stored, which is reflected by condition code 1. If the cpu is running, condition code 0 should be returned. Just the opposite of what the code is doing. Acked-by:
-
Heiko Carstens authored
The smp and the kvm code have different defines for the sigp order codes. Let's just have a single place where these are defined. Also move the sigp condition code and sigp cpu status bits to the new sigp.h header file. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
condition code "status stored" for sigp sense running always implies that only the "not running" status bit is set. Therefore no need to check if it is set. Signed-off-by:
-
Marc Zyngier authored
In order to avoid compilation failure when KVM is not compiled in, guard the mmu_notifier specific sections with both CONFIG_MMU_NOTIFIER and KVM_ARCH_WANT_MMU_NOTIFIER, like it is being done in the rest of the KVM code. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by:
-
Guo Chao authored
Signed-off-by:
Guo Chao <yan@linux.vnet.ibm.com> Signed-off-by:
-
Michael S. Tsirkin authored
On UP i386, when APIC is disabled # CONFIG_X86_UP_APIC is not set # CONFIG_PCI_IOAPIC is not set code looking at apicdrivers never has any effect but it still gets compiled in. In particular, this causes build failures with kvm, but it generally bloats the kernel unnecessarily. Fix by defining both __apicdrivers and __apicdrivers_end to be NULL when CONFIG_X86_LOCAL_APIC is unset: I verified that as the result any loop scanning __apicdrivers gets optimized out by the compiler. Warning: a .config with apic disabled doesn't seem to boot for me (even without this patch). Still verifying why, meanwhile this patch is compile-tested only. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reported-by:
Randy Dunlap <rdunlap@xenotime.net> Acked-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
- 25 Jun, 2012 8 commits
-
-
Michael S. Tsirkin authored
Implementation of PV EOI using shared memory. This reduces the number of exits an interrupt causes as much as by half. The idea is simple: there's a bit, per APIC, in guest memory, that tells the guest that it does not need EOI. We set it before injecting an interrupt and clear before injecting a nested one. Guest tests it using a test and clear operation - this is necessary so that host can detect interrupt nesting - and if set, it can skip the EOI MSR. There's a new MSR to set the address of said register in guest memory. Otherwise not much changed: - Guest EOI is not required - Register is tested & ISR is automatically cleared on exit For testing results see description of previous patch 'kvm_para: guest side for eoi avoidance'. Signed-off-by:
-
Michael S. Tsirkin authored
Each time we need to cancel injection we invoke same code (cancel_injection callback). Move it towards the end of function using the familiar goto on error pattern. Will make it easier to do more cleanups for PV EOI. Signed-off-by:
-
Michael S. Tsirkin authored
Commit eb0dc6d0368072236dcd086d7fdc17fd3c4574d4 introduced apic attention bitmask but kvm still syncs lapic unconditionally. As that commit suggested and in anticipation of adding more attention bits, only sync lapic if(apic_attention). Signed-off-by:
-
Michael S. Tsirkin authored
Document the new EOI MSR. Couldn't decide whether this change belongs conceptually on guest or host side, so a separate patch. Signed-off-by:
-
Michael S. Tsirkin authored
__test_and_clear_bit is actually atomic with respect to the local CPU. Add a note saying that KVM on x86 relies on this behaviour so people don't accidentaly break it. Also warn not to rely on this in portable code. Signed-off-by:
-
Michael S. Tsirkin authored
The idea is simple: there's a bit, per APIC, in guest memory, that tells the guest that it does not need EOI. Guest tests it using a single est and clear operation - this is necessary so that host can detect interrupt nesting - and if set, it can skip the EOI MSR. I run a simple microbenchmark to show exit reduction (note: for testing, need to apply follow-up patch 'kvm: host side for eoi optimization' + a qemu patch I posted separately, on host): Before: Performance counter stats for 'sleep 1s': 47,357 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 5,001 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 22,124 kvm:kvm_apic [99.98%] 49,849 kvm:kvm_exit [99.98%] 21,115 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 22,937 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.98%] 22,207 kvm:kvm_apic_accept_irq [99.98%] 22,421 kvm:kvm_eoi [99.98%] 0 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 57 kvm:kvm_emulate_insn [99.99%] 0 kvm:vcpu_match_mmio [99.99%] 0 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 23,609 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [99.99%] 226 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002100578 seconds time elapsed After: Performance counter stats for 'sleep 1s': 28,354 kvm:kvm_entry [99.98%] 0 kvm:kvm_hypercall [99.98%] 0 kvm:kvm_hv_hypercall [99.98%] 1,347 kvm:kvm_pio [99.98%] 0 kvm:kvm_cpuid [99.98%] 1,931 kvm:kvm_apic [99.98%] 29,595 kvm:kvm_exit [99.98%] 24,884 kvm:kvm_inj_virq [99.98%] 0 kvm:kvm_inj_exception [99.98%] 0 kvm:kvm_page_fault [99.98%] 1,986 kvm:kvm_msr [99.98%] 0 kvm:kvm_cr [99.98%] 0 kvm:kvm_pic_set_irq [99.98%] 0 kvm:kvm_apic_ipi [99.99%] 25,953 kvm:kvm_apic_accept_irq [99.99%] 26,132 kvm:kvm_eoi [99.99%] 26,593 kvm:kvm_pv_eoi [99.99%] 0 kvm:kvm_nested_vmrun [99.99%] 0 kvm:kvm_nested_intercepts [99.99%] 0 kvm:kvm_nested_vmexit [99.99%] 0 kvm:kvm_nested_vmexit_inject [99.99%] 0 kvm:kvm_nested_intr_vmexit [99.99%] 0 kvm:kvm_invlpga [99.99%] 0 kvm:kvm_skinit [99.99%] 284 kvm:kvm_emulate_insn [99.99%] 68 kvm:vcpu_match_mmio [99.99%] 68 kvm:kvm_userspace_exit [99.99%] 2 kvm:kvm_set_irq [99.99%] 2 kvm:kvm_ioapic_set_irq [99.99%] 28,288 kvm:kvm_msi_set_irq [99.99%] 1 kvm:kvm_ack_irq [99.99%] 131 kvm:kvm_mmio [100.00%] 588 kvm:kvm_fpu [100.00%] 0 kvm:kvm_age_page [100.00%] 0 kvm:kvm_try_async_get_page [100.00%] 0 kvm:kvm_async_pf_doublefault [100.00%] 0 kvm:kvm_async_pf_not_present [100.00%] 0 kvm:kvm_async_pf_ready [100.00%] 0 kvm:kvm_async_pf_completed 1.002039622 seconds time elapsed We see that # of exits is almost halved. Signed-off-by: -
Michael S. Tsirkin authored
We perform ISR lookups twice: during interrupt injection and on EOI. Typical workloads only have a single bit set there. So we can avoid ISR scans by 1. counting bits as we set/clear them in ISR 2. on set, caching the injected vector number 3. on clear, invalidating the cache The real purpose of this is enabling PV EOI which needs to quickly validate the vector. But non PV guests also benefit: with this patch, and without interrupt nesting, apic_find_highest_isr will always return immediately without scanning ISR. Signed-off-by:
-
Michael S. Tsirkin authored
Signed-off-by:
-
- 19 Jun, 2012 1 commit
-
-
Takuya Yoshikawa authored
The following commit did not care about the error handling path: commit c1a7b32a KVM: Avoid wasting pages for small lpage_info arrays If memory allocation fails, vfree() will be called with the address returned by kzalloc(). This patch fixes this issue. Signed-off-by:
Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by:
-
- 18 Jun, 2012 2 commits
-
-
Christoffer Dall authored
This is a preparatory patch for the KVM/ARM implementation. KVM/ARM will use the KVM_IRQ_LINE ioctl, which is currently conditional on __KVM_HAVE_IOAPIC, but ARM obviously doesn't have any IOAPIC support and we need a separate define. Signed-off-by:
-
Marc Zyngier authored
The KVM code sometimes uses CONFIG_HAVE_KVM_IRQCHIP to protect code that is related to IRQ routing, which not all in-kernel irqchips may support. Use KVM_CAP_IRQ_ROUTING instead. Signed-off-by:
-
- 13 Jun, 2012 4 commits
-
-
Cornelia Huck authored
The list of exit reasons for the kvm_userspace_exit event was missing recent additions; bring it into sync again. Reviewed-by:
-
Heinz Graalfs authored
For processing under KVM it is required to detect the actual SCLP console type in order to set it as preferred console. Signed-off-by:
Heinz Graalfs <graalfs@linux.vnet.ibm.com> Acked-by:
Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
The initial cpu reset sets the cpu in the stopped state. Several places check for the cpu state (e.g. sigp set prefix) and not setting the STOPPED state triggered errors with newer guest kernels after reboot. Signed-off-by:
-
Xudong Hao authored
EPT Dirty bit use bit 9 as Intel SDM definition, to avoid conflict, change PT_FIRST_AVAIL_BITS_SHIFT to 10. Signed-off-by:
Xudong Hao <xudong.hao@intel.com> Signed-off-by:
Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by:
-
- 12 Jun, 2012 1 commit
-
-
Takuya Yoshikawa authored
Size is not needed to return one from pre-allocated objects. Signed-off-by:
-
- 06 Jun, 2012 4 commits
-
-
git://github.com/agraf/linux-2.6Avi Kivity authored
Alex says: "Changes this time include: - Generalize KVM_GUEST support to overall ePAPR code - Fix reset for Book3S HV - Fix machine check deferral when CONFIG_KVM_GUEST=y - Add support for BookE register DECAR" * 'for-upstream' of git://github.com/agraf/linux-2.6: KVM: PPC: Not optimizing MSR_CE and MSR_ME with paravirt. KVM: PPC: booke: Added DECAR support KVM: PPC: Book3S HV: Make the guest hash table size configurable KVM: PPC: Factor out guest epapr initialization Signed-off-by:
-
Michael S. Tsirkin authored
I see this in 3.5-rc1: arch/x86/kvm/mmu.c: In function ‘kvm_test_age_rmapp’: arch/x86/kvm/mmu.c:1271: warning: ‘iter.desc’ may be used uninitialized in this function The line in question was introduced by commit 1e3f42f0 static int kvm_test_age_rmapp(struct kvm *kvm, unsigned long *rmapp, unsigned long data) { - u64 *spte; + u64 *sptep; + struct rmap_iterator iter; <- line 1271 int young = 0; /* The reason I think is that the compiler assumes that the rmap value could be 0, so static u64 *rmap_get_first(unsigned long rmap, struct rmap_iterator *iter) { if (!rmap) return NULL; if (!(rmap & 1)) { iter->desc = NULL; return (u64 *)rmap; } iter->desc = (struct pte_list_desc *)(rmap & ~1ul); iter->pos = 0; return iter->desc->sptes[iter->pos]; } will not initialize iter.desc, but the compiler isn't smart enough to see that for (sptep = rmap_get_first(*rmapp, &iter); sptep; sptep = rmap_get_next(&iter)) { will immediately exit in this case. I checked by adding if (!*rmapp) goto out; on top which is clearly equivalent but disables the warning. This patch uses uninitialized_var to disable the warning without increasing code size. Signed-off-by:
-
Christoffer Dall authored
Introduces a couple of print functions, which are essentially wrappers around standard printk functions, with a KVM: prefix. Functions introduced or modified are: - kvm_err(fmt, ...) - kvm_info(fmt, ...) - kvm_debug(fmt, ...) - kvm_pr_unimpl(fmt, ...) - pr_unimpl(vcpu, fmt, ...) -> vcpu_unimpl(vcpu, fmt, ...) Signed-off-by:
-
Christian Borntraeger authored
Since Carsten is now working on a different project, Cornelia will work as the 2nd s390/kvm maintainer. Signed-off-by:
-
- 05 Jun, 2012 4 commits
-
-
Orit Wasserman authored
For example migration between Westmere and Nehelem hosts, caught in big real mode. The code that fixes the segments for real mode guest was moved from enter_rmode to vmx_set_segments. enter_rmode calls vmx_set_segments for each segment. Signed-off-by:
Orit Wasserman <owasserm@rehdat.com> Signed-off-by:
-
Gleb Natapov authored
mmu_shrink() needlessly iterates over all VMs even though it will not attempt to free mmu pages from more than one on them. Fix that and also check used mmu pages count outside of VM lock to skip inactive VMs faster. Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
-
Avi Kivity authored
Practically all patches to ia64 KVM are build fixes; numerous warnings remain; the last patch from the maintainer was committed more than three years ago. It is clear that no one is using this thing. Mark as BROKEN to ensure people don't get hit by pointless build problems. Signed-off-by:
-
Xudong Hao authored
Signed-off-by:
Haitao Shan <haitao.shan@intel.com> Signed-off-by:
-
