- 16 Jan, 2015 40 commits
-
-
Rafael J. Wysocki authored
commit bd9b2f9a upstream. The ACPI device enumeration code in Linux assumes that buttons always are wakeup devices, so it calls acpi_setup_gpe_for_wake() for them which leads to undesirable side effects. Namely, that function sets up implicit device wake notification mechanism for a given GPE if there is no handler method in the ACPI namespace, which from the ACPICA's perspective means that there always is a way to handle that GPE if enabled. However, we don't handle wake notify events for buttons, so if there are no handler methods for their GPEs in the namespace, enabling a button GPE at run time leads to a GPE storm in some cases (the GPE triggers, ACPICA carries out the implicit wake notification for it which isn't handled, so the GPE triggers again and so on). To prevent that from happening use acpi_mark_gpe_for_wake() instead of acpi_setup_gpe_for_wake() for buttons which will cause ACPICA to only enable button GPEs if there are handler methods for the in the namespace. Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Rafael J. Wysocki authored
commit c12f07d1 upstream. ACPICA commit c49dbfed2bc069d0038ea7e1294409bfde7c2c8c Some potential callers of acpi_setup_gpe_for_wake may know in advance that there won't be any notify handlers installed for device wake notifications from the given GPE (one example is a button GPE in Linux). For these cases, acpi_mark_gpe_for_wake should be used instead of acpi_setup_gpe_for_wake. This will set the ACPI_GPE_CAN_WAKE flag for the GPE without trying to setup implicit wake notification for it (since there's no handler method). Rafael Wysocki. Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by:
-
Kent Overstreet authored
commit bcf090e0 upstream. this was very wrong - mempool_alloc() only guarantees success with GFP_WAIT. bcache uses GFP_NOWAIT in various other places where we have a fallback, circuits must've gotten crossed when writing this code or something. Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Cc: Gabriel de Perthuis <g2p.code@gmail.com> Signed-off-by:
-
Linus Lüssing authored
commit f0b4eece upstream. Ebtables on the OUTPUT chain (NF_BR_LOCAL_OUT) would not work as expected for both locally generated IGMP and MLD queries. The IP header specific filter options are off by 14 Bytes for netfilter (actual output on interfaces is fine). NF_HOOK() expects the skb->data to point to the IP header, not the ethernet one (while dev_queue_xmit() does not). Luckily there is an br_dev_queue_push_xmit() helper function already - let's just use that. Introduced by eb1d1641 ("bridge: Add core IGMP snooping support") Ebtables example: $ ebtables -I OUTPUT -p IPv6 -o eth1 --logical-out br0 \ --log --log-level 6 --log-ip6 --log-prefix="~EBT: " -j DROP before (broken): ~EBT: IN= OUT=eth1 MAC source = 02:04:64:a4:39:c2 \ MAC dest = 33:33:00:00:00:01 proto = 0x86dd IPv6 \ SRC=64a4:39c2:86dd:6000:0000:0020:0001:fe80 IPv6 \ DST=0000:0000:0000:0004:64ff:fea4:39c2:ff02, \ IPv6 priority=0x3, Next Header=2 after (working): ~EBT: IN= OUT=eth1 MAC source = 02:04:64:a4:39:c2 \ MAC dest = 33:33:00:00:00:01 proto = 0x86dd IPv6 \ SRC=fe80:0000:0000:0000:0004:64ff:fea4:39c2 IPv6 \ DST=ff02:0000:0000:0000:0000:0000:0000:0001, \ IPv6 priority=0x0, Next Header=0 Signed-off-by:
Linus Lüssing <linus.luessing@web.de> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Dan Carpenter authored
commit 2196937e upstream. We could be reading 8 bytes into a 4 byte buffer here. It seems harmless but adding a check is the right thing to do and it silences a static checker warning. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Giedrius Statkevičius authored
commit 2bacedad upstream. New Genius MousePen i608X devices have a new id 0x501a instead of the old 0x5011 so add a new #define with "_2" appended and change required places. The remaining two checkpatch warnings about line length being over 80 characters are present in the original files too and this patch was made in the same style (no line break). Just adding a new id and changing the required places should make the new device work without any issues according to the bug report in the following url. This patch was made according to and fixes: https://bugzilla.kernel.org/show_bug.cgi?id=67111Signed-off-by:
Giedrius Statkevičius <giedrius.statkevicius@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Pavel Machek authored
commit 4bf9636c upstream. Commit 9fc2105a ("ARM: 7830/1: delay: don't bother reporting bogomips in /proc/cpuinfo") breaks audio in python, and probably elsewhere, with message FATAL: cannot locate cpu MHz in /proc/cpuinfo I'm not the first one to hit it, see for example https://theredblacktree.wordpress.com/2014/08/10/fatal-cannot-locate-cpu-mhz-in-proccpuinfo/ https://devtalk.nvidia.com/default/topic/765800/workaround-for-fatal-cannot-locate-cpu-mhz-in-proc-cpuinf/?offset=1 Reading original changelog, I have to say "Stop breaking working setups. You know who you are!". Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Nishanth Menon authored
commit 9008d83f upstream. Commit 705814b5 ("ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5") Moved logic generic for OMAP5+ as part of the init routine by introducing omap4_pm_init. However, the patch left the powerdomain initial setup, an unused omap4430 es1.0 check and a spurious log "Power Management for TI OMAP4." in the original code. Remove the duplicate code which is already present in omap4_pm_init from omap4_init_static_deps. As part of this change, also move the u-boot version print out of the static dependency function to the omap4_pm_init function. Fixes: 705814b5 ("ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5") Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Tomasz Figa authored
commit 5e794de5 upstream. The PWM block is required for system clock source so it must be always enabled. This patch fixes boot issues on SMDK6410 which did not have the node enabled explicitly for other purposes. Fixes: eeb93d02 ("clocksource: of: Respect device tree node status") Signed-off-by:
Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
Lokesh Vutla authored
commit be668835 upstream. OMAP wdt driver supports only ti,omap3-wdt compatible. In DRA7 dt wdt compatible property is defined as ti,omap4-wdt by mistake instead of ti,omap3-wdt. Correcting the typo. Fixes: 6e58b8f1 ("ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board") Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:
-
Johannes Berg authored
commit 7b990789 upstream. The change from \d+ to .+ inside __aligned() means that the following structure: struct test { u8 a __aligned(2); u8 b __aligned(2); }; essentially gets modified to struct test { u8 a; }; for purposes of kernel-doc, thus dropping a struct member, which in turns causes warnings and invalid kernel-doc generation. Fix this by replacing the catch-all (".") with anything that's not a semicolon ("[^;]"). Fixes: 9dc30918 ("scripts/kernel-doc: handle struct member __aligned without numbers") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Cc: Nishanth Menon <nm@ti.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Ryusuke Konishi authored
commit 705304a8 upstream. Same story as in commit 41080b5a ("nfsd race fixes: ext2") (similar ext2 fix) except that nilfs2 needs to use insert_inode_locked4() instead of insert_inode_locked() and a bug of a check for dead inodes needs to be fixed. If nilfs_iget() is called from nfsd after nilfs_new_inode() calls insert_inode_locked4(), nilfs_iget() will wait for unlock_new_inode() at the end of nilfs_mkdir()/nilfs_create()/etc to unlock the inode. If nilfs_iget() is called before nilfs_new_inode() calls insert_inode_locked4(), it will create an in-core inode and read its data from the on-disk inode. But, nilfs_iget() will find i_nlink equals zero and fail at nilfs_read_inode_common(), which will lead it to call iget_failed() and cleanly fail. However, this sanity check doesn't work as expected for reused on-disk inodes because they leave a non-zero value in i_mode field and it hinders the test of i_nlink. This patch also fixes the issue by removing the test on i_mode that nilfs2 doesn't need. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Dan Carpenter authored
commit 69eba10e upstream. In olden times the snd_hda_param_read() function always set "*start_id" but in 2007 we introduced a new return and it causes uninitialized data bugs in a couple of the callers: print_codec_info() and hdmi_parse_codec(). Fixes: e8a7f136 ('[ALSA] hda-intel - Improve HD-audio codec probing robustness') Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Karl Relton authored
commit da940db4 upstream. Apple bluetooth wireless keyboard (sold in UK) has always reported zero for battery strength no matter what condition the batteries are actually in. With this patch applied (applying same quirk as other Apple keyboards), the battery strength is now correctly reported. Signed-off-by:
Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by:
-
Anton Blanchard authored
commit cd32e2dc upstream. We have some code in udbg_uart_getc_poll() that tries to protect against a NULL udbg_uart_in, but gets it all wrong. Found with the LLVM static analyzer (scan-build). Fixes: 30925748 ("powerpc: Cleanup udbg_16550 and add support for LPC PIO-only UARTs") Signed-off-by:
Anton Blanchard <anton@samba.org> [mpe: Add some newlines for readability while we're here] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Xue jiufei authored
commit 53dc20b9 upstream. In ocfs2_link(), the parent directory inode passed to function ocfs2_lookup_ino_from_name() is wrong. Parameter dir is the parent of new_dentry not old_dentry. We should get old_dir from old_dentry and lookup old_dentry in old_dir in case another node remove the old dentry. With this change, hard linking works again, when paths are relative with at least one subdirectory. This is how the problem was reproducable: # mkdir a # mkdir b # touch a/test # ln a/test b/test ln: failed to create hard link `b/test' => `a/test': No such file or directory However when creating links in the same dir, it worked well. Now the link gets created. Fixes: 0e048316 ("ocfs2: check existence of old dentry in ocfs2_link()") Signed-off-by:
joyce.xue <xuejiufei@huawei.com> Reported-by:
Szabo Aron - UBIT <aron@ubit.hu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Tested-by:
-
Roger Quadros authored
commit 775a9134 upstream. 3430LDP has NAND flash with 32 bytes OOB size which is sufficient to hold BCH8 codes but the small page check introduced in commit b491da72 ("mtd: nand: omap: clean-up ecc layout for BCH ecc schemes") considers anything below 64 bytes unsuitable for BCH4/8/16. There is another bug in that code where it doesn't skip the check for OMAP_ECC_HAM1_CODE_SW. Get rid of that small page check code as it is insufficient and redundant because we are checking for OOB available bytes vs ecc layout before calling nand_scan_tail(). Fixes: b491da72 ("mtd: nand: omap: clean-up ecc layout for BCH ecc schemes") Reported-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Takashi Sakamoto authored
commit 92cb4658 upstream. Although the 't->length' is a big-endian value, it's used without any conversion. This means that the driver always uses 'length' parameter. Fixes: 555e8a8f("ALSA: fireworks: Add command/response functionality into hwdep interface") Reported-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Mika Westerberg authored
commit 5b44c53a upstream. When a hid driver that uses i2c-hid as transport is unloaded, the hid core will call i2c_hid_stop() which releases all the buffers associated with the device. This includes also the command buffer. Now, when the i2c-hid driver itself is unloaded it tries to power down the device by sending it PWR_SLEEP command. Since the command buffer is already released we get following crash: [ 79.691459] BUG: unable to handle kernel NULL pointer dereference at (null) [ 79.691532] IP: [<ffffffffa05bc049>] __i2c_hid_command+0x49/0x310 [i2c_hid] ... [ 79.693467] Call Trace: [ 79.693494] [<ffffffff810424e1>] ? __unmask_ioapic+0x21/0x30 [ 79.693537] [<ffffffff81042855>] ? unmask_ioapic+0x25/0x40 [ 79.693581] [<ffffffffa05bc35b>] ? i2c_hid_set_power+0x4b/0xa0 [i2c_hid] [ 79.693632] [<ffffffffa05bc3cf>] ? i2c_hid_runtime_resume+0x1f/0x30 [i2c_hid] [ 79.693689] [<ffffffff814c08fb>] ? __rpm_callback+0x2b/0x70 [ 79.693733] [<ffffffff814c0961>] ? rpm_callback+0x21/0x90 [ 79.693776] [<ffffffff814c0dec>] ? rpm_resume+0x41c/0x600 [ 79.693820] [<ffffffff814c1e1c>] ? __pm_runtime_resume+0x4c/0x80 [ 79.693868] [<ffffffff814b8588>] ? __device_release_driver+0x28/0x100 [ 79.693917] [<ffffffff814b8d90>] ? driver_detach+0xa0/0xb0 [ 79.693959] [<ffffffff814b82cc>] ? bus_remove_driver+0x4c/0xb0 [ 79.694006] [<ffffffff810d1cfd>] ? SyS_delete_module+0x11d/0x1d0 [ 79.694054] [<ffffffff8165f107>] ? int_signal+0x12/0x17 [ 79.694095] [<ffffffff8165ee69>] ? system_call_fastpath+0x12/0x17 Fix this so that we only free buffers when the i2c-hid driver itself is removed. Fixes: 34f439e4 ("HID: i2c-hid: add runtime PM support") Reported-by:
Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Takashi Iwai authored
commit 077661b6 upstream. The of_node_put() call in eukrea_tlv320_probe() may take an uninitialized pointer, as compiler spotted out: sound/soc/fsl/eukrea-tlv320.c:221:14: warning: 'ssi_np' may be used uninitialized in this function [-Wuninitialized] This patch adds the proper NULL initializations as a fix. (codec_np is also NULL initialized just for consistency.) Fixes: 66f23290 ('ASoC: eukrea-tlv320: Add DT support') Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Arnaud Ebalard authored
commit 5945b288 upstream. When Intersil ISL12057 support was added by commit 70e12337 ("rtc: Add support for Intersil ISL12057 I2C RTC chip"), two masks for time registers values imported from the device were either wrong or omitted, leading to additional bits from those registers to impact read values: - mask for hour register value when reading it in AM/PM mode. As AM/PM mode is not the usual mode used by the driver, this error would only have an impact on an externally configured RTC hour later read by the driver. - mask for month value. The lack of masking would provide an erroneous value if century bit is set. This patch fixes those two masks. Fixes: 70e12337 ("rtc: Add support for Intersil ISL12057 I2C RTC chip") Signed-off-by:
Arnaud Ebalard <arno@natisbad.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Grant Likely <grant.likely@linaro.org> Acked-by:
Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by:
-
Jerry Hoemann authored
commit 6424babf upstream. During file system stress testing on 3.10 and 3.12 based kernels, the umount command occasionally hung in fsnotify_unmount_inodes in the section of code: spin_lock(&inode->i_lock); if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) { spin_unlock(&inode->i_lock); continue; } As this section of code holds the global inode_sb_list_lock, eventually the system hangs trying to acquire the lock. Multiple crash dumps showed: The inode->i_state == 0x60 and i_count == 0 and i_sb_list would point back at itself. As this is not the value of list upon entry to the function, the kernel never exits the loop. To help narrow down problem, the call to list_del_init in inode_sb_list_del was changed to list_del. This poisons the pointers in the i_sb_list and causes a kernel to panic if it transverse a freed inode. Subsequent stress testing paniced in fsnotify_unmount_inodes at the bottom of the list_for_each_entry_safe loop showing next_i had become free. We believe the root cause of the problem is that next_i is being freed during the window of time that the list_for_each_entry_safe loop temporarily releases inode_sb_list_lock to call fsnotify and fsnotify_inode_delete. The code in fsnotify_unmount_inodes attempts to prevent the freeing of inode and next_i by calling __iget. However, the code doesn't do the __iget call on next_i if i_count == 0 or if i_state & (I_FREEING | I_WILL_FREE) The patch addresses this issue by advancing next_i in the above two cases until we either find a next_i which we can __iget or we reach the end of the list. This makes the handling of next_i more closely match the handling of the variable "inode." The time to reproduce the hang is highly variable (from hours to days.) We ran the stress test on a 3.10 kernel with the proposed patch for a week without failure. During list_for_each_entry_safe, next_i is becoming free causing the loop to never terminate. Advance next_i in those cases where __iget is not done. Signed-off-by:
Jerry Hoemann <jerry.hoemann@hp.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Ken Helias <kenhelias@firemail.de> Signed-off-by:
-
Jiri Olsa authored
commit f61ff6c0 upstream. Linus reported perf report command being interrupted due to processing of 'out of order' event, with following error: Timestamp below last timeslice flush 0x5733a8 [0x28]: failed to process type: 3 I could reproduce the issue and in my case it was caused by one CPU (mmap) being behind during record and userspace mmap reader seeing the data after other CPUs data were already stored. This is expected under some circumstances because we need to limit the number of events that we queue for reordering when we receive a PERF_RECORD_FINISHED_ROUND or when we force flush due to memory pressure. Reported-by:
Jiri Olsa <jolsa@kernel.org> Acked-by:
Ingo Molnar <mingo@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1417016371-30249-1-git-send-email-jolsa@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> [zhangzhiqiang: backport to 3.10: - adjust context - commit f61ff6c0 struct events_stats was defined in tools/perf/util/event.h while 3.10 stable defined in tools/perf/util/hist.h. - 3.10 stable there is no pr_oe_time() which used for debug. - After the above adjustments, becomes same to the original patch: https://github.com/torvalds/linux/commit/f61ff6c06dc8f32c7036013ad802c899ec590607 ] Signed-off-by:
Zhiqiang Zhang <zhangzhiqiang.zhang@huawei.com> [ luis: backported to 3.16: used zhangzhiqiang backport to 3.10 ] Signed-off-by:
-
Stefano Stabellini authored
commit a4dba130 upstream. Introduce an arch specific function to find out whether a particular dma mapping operation needs to bounce on the swiotlb buffer. On ARM and ARM64, if the page involved is a foreign page and the device is not coherent, we need to bounce because at unmap time we cannot execute any required cache maintenance operations (we don't know how to find the pfn from the mfn). No change of behaviour for x86. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Ian Campbell <ian.campbell@citrix.com> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [ stefano: The commit needs to be slightly modified because is_device_dma_coherent is not available on kernels < 3.19, so I just removed the call, thus assuming that the device is not coherent on arm (slower but safe) ] Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> [ luis: backported to 3.16: used backport by stefano ] Signed-off-by:
-
Konstantin Khlebnikov authored
commit b800c91a upstream. Fix for BUG_ON(anon_vma->degree) splashes in unlink_anon_vmas() ("kernel BUG at mm/rmap.c:399!") caused by commit 7a3ef208 ("mm: prevent endless growth of anon_vma hierarchy") Anon_vma_clone() is usually called for a copy of source vma in destination argument. If source vma has anon_vma it should be already in dst->anon_vma. NULL in dst->anon_vma is used as a sign that it's called from anon_vma_fork(). In this case anon_vma_clone() finds anon_vma for reusing. Vma_adjust() calls it differently and this breaks anon_vma reusing logic: anon_vma_clone() links vma to old anon_vma and updates degree counters but vma_adjust() overrides vma->anon_vma right after that. As a result final unlink_anon_vmas() decrements degree for wrong anon_vma. This patch assigns ->anon_vma before calling anon_vma_clone(). Signed-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Reported-and-tested-by:
Chris Clayton <chris2553@googlemail.com> Reported-and-tested-by:
Oded Gabbay <oded.gabbay@amd.com> Reported-and-tested-by:
Chih-Wei Huang <cwhuang@android-x86.org> Acked-by:
Rik van Riel <riel@redhat.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Daniel Forrest <dan.forrest@ssec.wisc.edu> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Linus Torvalds authored
commit 690eac53 upstream. Commit fee7e49d ("mm: propagate error from stack expansion even for guard page") made sure that we return the error properly for stack growth conditions. It also theorized that counting the guard page towards the stack limit might break something, but also said "Let's see if anybody notices". Somebody did notice. Apparently android-x86 sets the stack limit very close to the limit indeed, and including the guard page in the rlimit check causes the android 'zygote' process problems. So this adds the (fairly trivial) code to make the stack rlimit check be against the actual real stack size, rather than the size of the vma that includes the guard page. Reported-and-tested-by:
-
Dan Carpenter authored
commit 606185b2 upstream. This is a static checker fix. We write some binary settings to the sysfs file. One of the settings is the "->startup_profile". There isn't any checking to make sure it fits into the pyra->profile_settings[] array in the profile_activated() function. I added a check to pyra_sysfs_write_settings() in both places because I wasn't positive that the other callers were correct. Signed-off-by:
-
Luca Abeni authored
commit 269ad801 upstream. The dl_runtime_exceeded() function is supposed to ckeck if a SCHED_DEADLINE task must be throttled, by checking if its current runtime is <= 0. However, it also checks if the scheduling deadline has been missed (the current time is larger than the current scheduling deadline), further decreasing the runtime if this happens. This "double accounting" is wrong: - In case of partitioned scheduling (or single CPU), this happens if task_tick_dl() has been called later than expected (due to small HZ values). In this case, the current runtime is also negative, and replenish_dl_entity() can take care of the deadline miss by recharging the current runtime to a value smaller than dl_runtime - In case of global scheduling on multiple CPUs, scheduling deadlines can be missed even if the task did not consume more runtime than expected, hence penalizing the task is wrong This patch fix this problem by throttling a SCHED_DEADLINE task only when its runtime becomes negative, and not modifying the runtime Signed-off-by:
Luca Abeni <luca.abeni@unitn.it> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Juri Lelli <juri.lelli@gmail.com> Cc: Dario Faggioli <raistlin@linux.it> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1418813432-20797-3-git-send-email-luca.abeni@unitn.itSigned-off-by:
-
Luca Abeni authored
commit 6a503c3b upstream. According to global EDF, tasks should be migrated between runqueues without checking if their scheduling deadlines and runtimes are valid. However, SCHED_DEADLINE currently performs such a check: a migration happens doing: deactivate_task(rq, next_task, 0); set_task_cpu(next_task, later_rq->cpu); activate_task(later_rq, next_task, 0); which ends up calling dequeue_task_dl(), setting the new CPU, and then calling enqueue_task_dl(). enqueue_task_dl() then calls enqueue_dl_entity(), which calls update_dl_entity(), which can modify scheduling deadline and runtime, breaking global EDF scheduling. As a result, some of the properties of global EDF are not respected: for example, a taskset {(30, 80), (40, 80), (120, 170)} scheduled on two cores can have unbounded response times for the third task even if 30/80+40/80+120/170 = 1.5809 < 2 This can be fixed by invoking update_dl_entity() only in case of wakeup, or if this is a new SCHED_DEADLINE task. Signed-off-by:
-
Vlastimil Babka authored
commit 9e5e3661 upstream. Charles Shirron and Paul Cassella from Cray Inc have reported kswapd stuck in a busy loop with nothing left to balance, but kswapd_try_to_sleep() failing to sleep. Their analysis found the cause to be a combination of several factors: 1. A process is waiting in throttle_direct_reclaim() on pgdat->pfmemalloc_wait 2. The process has been killed (by OOM in this case), but has not yet been scheduled to remove itself from the waitqueue and die. 3. kswapd checks for throttled processes in prepare_kswapd_sleep(): if (waitqueue_active(&pgdat->pfmemalloc_wait)) { wake_up(&pgdat->pfmemalloc_wait); return false; // kswapd will not go to sleep } However, for a process that was already killed, wake_up() does not remove the process from the waitqueue, since try_to_wake_up() checks its state first and returns false when the process is no longer waiting. 4. kswapd is running on the same CPU as the only CPU that the process is allowed to run on (through cpus_allowed, or possibly single-cpu system). 5. CONFIG_PREEMPT_NONE=y kernel is used. If there's nothing to balance, kswapd encounters no voluntary preemption points and repeatedly fails prepare_kswapd_sleep(), blocking the process from running and removing itself from the waitqueue, which would let kswapd sleep. So, the source of the problem is that we prevent kswapd from going to sleep until there are processes waiting on the pfmemalloc_wait queue, and a process waiting on a queue is guaranteed to be removed from the queue only when it gets scheduled. This was done to make sure that no process is left sleeping on pfmemalloc_wait when kswapd itself goes to sleep. However, it isn't necessary to postpone kswapd sleep until the pfmemalloc_wait queue actually empties. To prevent processes from being left sleeping, it's actually enough to guarantee that all processes waiting on pfmemalloc_wait queue have been woken up by the time we put kswapd to sleep. This patch therefore fixes this issue by substituting 'wake_up' with 'wake_up_all' and removing 'return false' in the code snippet from prepare_kswapd_sleep() above. Note that if any process puts itself in the queue after this waitqueue_active() check, or after the wake up itself, it means that the process will also wake up kswapd - and since we are under prepare_to_wait(), the wake up won't be missed. Also we update the comment prepare_kswapd_sleep() to hopefully more clearly describe the races it is preventing. Fixes: 5515061d ("mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage") Signed-off-by:
Vladimir Davydov <vdavydov@parallels.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.cz> Acked-by:
-
Johannes Weiner authored
commit 2d6d7f98 upstream. Tejun, while reviewing the code, spotted the following race condition between the dirtying and truncation of a page: __set_page_dirty_nobuffers() __delete_from_page_cache() if (TestSetPageDirty(page)) page->mapping = NULL if (PageDirty()) dec_zone_page_state(page, NR_FILE_DIRTY); dec_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); if (page->mapping) account_page_dirtied(page) __inc_zone_page_state(page, NR_FILE_DIRTY); __inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); which results in an imbalance of NR_FILE_DIRTY and BDI_RECLAIMABLE. Dirtiers usually lock out truncation, either by holding the page lock directly, or in case of zap_pte_range(), by pinning the mapcount with the page table lock held. The notable exception to this rule, though, is do_wp_page(), for which this race exists. However, do_wp_page() already waits for a locked page to unlock before setting the dirty bit, in order to prevent a race where clear_page_dirty() misses the page bit in the presence of dirty ptes. Upgrade that wait to a fully locked set_page_dirty() to also cover the situation explained above. Afterwards, the code in set_page_dirty() dealing with a truncation race is no longer needed. Remove it. Reported-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Konstantin Khlebnikov authored
commit 7a3ef208 upstream. Constantly forking task causes unlimited grow of anon_vma chain. Each next child allocates new level of anon_vmas and links vma to all previous levels because pages might be inherited from any level. This patch adds heuristic which decides to reuse existing anon_vma instead of forking new one. It adds counter anon_vma->degree which counts linked vmas and directly descending anon_vmas and reuses anon_vma if counter is lower than two. As a result each anon_vma has either vma or at least two descending anon_vmas. In such trees half of nodes are leafs with alive vmas, thus count of anon_vmas is no more than two times bigger than count of vmas. This heuristic reuses anon_vmas as few as possible because each reuse adds false aliasing among vmas and rmap walker ought to scan more ptes when it searches where page is might be mapped. Link: http://lkml.kernel.org/r/20120816024610.GA5350@evergreen.ssec.wisc.edu Fixes: 5beb4930 ("mm: change anon_vma linking to fix multi-process server scalability issue") [akpm@linux-foundation.org: fix typo, per Rik] Signed-off-by:
Daniel Forrest <dan.forrest@ssec.wisc.edu> Tested-by:
Jerome Marchand <jmarchan@redhat.com> Reviewed-by:
-
Oleg Nesterov authored
commit 3245d6ac upstream. wait_consider_task() checks EXIT_ZOMBIE after EXIT_DEAD/EXIT_TRACE and both checks can fail if we race with EXIT_ZOMBIE -> EXIT_DEAD/EXIT_TRACE change in between, gcc needs to reload p->exit_state after security_task_wait(). In this case ->notask_error will be wrongly cleared and do_wait() can hang forever if it was the last eligible child. Many thanks to Arne who carefully investigated the problem. Note: this bug is very old but it was pure theoretical until commit b3ab0316 ("wait: completely ignore the EXIT_DEAD tasks"). Before this commit "-O2" was probably enough to guarantee that compiler won't read ->exit_state twice. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Arne Goedeke <el@laramies.com> Tested-by:
-
Ard Biesheuvel authored
commit 0e63ea48 upstream. The early ioremap support introduced by patch bf4b558e ("arm64: add early_ioremap support") failed to add a call to early_ioremap_reset() at an appropriate time. Without this call, invocations of early_ioremap etc. that are done too late will go unnoticed and may cause corruption. This is exactly what happened when the first user of this feature was added in patch f84d0275 ("arm64: add EFI runtime services"). The early mapping of the EFI memory map is unmapped during an early initcall, at which time the early ioremap support is long gone. Fix by adding the missing call to early_ioremap_reset() to setup_arch(), and move the offending early_memunmap() to right after the point where the early mapping of the EFI memory map is last used. Fixes: f84d0275 ("arm64: add EFI runtime services") Signed-off-by:
Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
J. Bruce Fields authored
commit 49a068f8 upstream. A struct xdr_stream at a page boundary might point to the end of one page or the beginning of the next, but xdr_truncate_encode isn't prepared to handle the former. This can cause corruption of NFSv4 READDIR replies in the case that a readdir entry that would have exceeded the client's dircount/maxcount limit would have ended exactly on a 4k page boundary. You're more likely to hit this case on large directories. Other xdr_truncate_encode callers are probably also affected. Reported-by:
Holger Hoffstätte <holger.hoffstaette@googlemail.com> Tested-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Wei Yang authored
commit 7c2e211f upstream. Current vfio-pci just supports normal pci device, so vfio_pci_probe() will return if the pci device is not a normal device. While current code makes a mistake. PCI_HEADER_TYPE is the offset in configuration space of the device type, but we use this value to mask the type value. This patch fixs this by do the check directly on the pci_dev->hdr_type. Signed-off-by:
Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Aaron Plattner authored
commit 60834b73 upstream. Vendor ID 0x10de0072 is used by a yet-to-be-named GPU chip. Signed-off-by:
Aaron Plattner <aplattner@nvidia.com> Signed-off-by:
-
Linus Torvalds authored
commit fee7e49d upstream. Jay Foad reports that the address sanitizer test (asan) sometimes gets confused by a stack pointer that ends up being outside the stack vma that is reported by /proc/maps. This happens due to an interaction between RLIMIT_STACK and the guard page: when we do the guard page check, we ignore the potential error from the stack expansion, which effectively results in a missing guard page, since the expected stack expansion won't have been done. And since /proc/maps explicitly ignores the guard page (commit d7824370: "mm: fix up some user-visible effects of the stack guard page"), the stack pointer ends up being outside the reported stack area. This is the minimal patch: it just propagates the error. It also effectively makes the guard page part of the stack limit, which in turn measn that the actual real stack is one page less than the stack limit. Let's see if anybody notices. We could teach acct_stack_growth() to allow an extra page for a grow-up/grow-down stack in the rlimit test, but I don't want to add more complexity if it isn't needed. Reported-and-tested-by:
Jay Foad <jay.foad@gmail.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit 1b1f3e16 upstream. If an ACPI device object whose _STA returns 0 (not present and not functional) has _PR0 or _PS0, its power_manageable flag will be set and acpi_bus_init_power() will return 0 for it. Consequently, if such a device object is passed to the ACPI device PM functions, they will attempt to carry out the requested operation on the device, although they should not do that for devices that are not present. To fix that problem make acpi_bus_init_power() return an error code for devices that are not present which will cause power_manageable to be cleared for them as appropriate in acpi_bus_get_power_flags(). However, the lists of power resources should not be freed for the device in that case, so modify acpi_bus_get_power_flags() to keep those lists even if acpi_bus_init_power() returns an error. Accordingly, when deciding whether or not the lists of power resources need to be freed, acpi_free_power_resources_lists() should check the power.flags.power_resources flag instead of flags.power_manageable, so make that change too. Furthermore, if acpi_bus_attach() sees that flags.initialized is unset for the given device, it should reset the power management settings of the device and re-initialize them from scratch instead of relying on the previous settings (the device may have appeared after being not present previously, for example), so make it use the 'valid' flag of the D0 power state as the initial value of flags.power_manageable for it and call acpi_bus_init_power() to discover its current power state. Signed-off-by:
-
Alex Deucher authored
commit 02ae7af5 upstream. Enabling bapm seems to cause clocking problems on some KV configurations. Disable it by default for now. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
