Fix the MDIO interface declarations to reflect what is currently supported by
the PCI11010 / PCI11414 devices (C22 for RGMII and C22_C45 for SGMII)
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following contain more Netfilter fixes for net:

1) syzbot warning in nfnetlink bind, from Florian.

2) Refetch conntrack after __nf_conntrack_confirm(), from Florian Westphal.

3) Move struct nf_ct_timeout back at the bottom of the ctnl_time, to
   where it before recent update, also from Florian.

4) Add NL_SET_BAD_ATTR() to nf_tables netlink for proper set element
   commands error reporting.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Report the element that causes problems via netlink extended ACK for set
element commands.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

syzbot reports:
BUG: KASAN: slab-out-of-bounds in __list_del_entry_valid+0xcc/0xf0 lib/list_debug.c:42
[..]
 list_del include/linux/list.h:148 [inline]
 cttimeout_net_exit+0x211/0x540 net/netfilter/nfnetlink_cttimeout.c:617

No reproducer so far. Looking at recent changes in this area
its clear that the free_head must not be at the end of the
structure because nf_ct_timeout structure has variable size.

Reported-by: <syzbot+92968395eedbdbd3617d@syzkaller.appspotmail.com>
Fixes: 78222bac ("netfilter: cttimeout: decouple unlink and free on netns destruction")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

In case the conntrack is clashing, insertion can free skb->_nfct and
set skb->_nfct to the already-confirmed entry.

This wasn't found before because the conntrack entry and the extension
space used to free'd after an rcu grace period, plus the race needs
events enabled to trigger.

Reported-by: <syzbot+793a590957d9c1b96620@syzkaller.appspotmail.com>
Fixes: 71d8c47f ("netfilter: conntrack: introduce clash resolution on insertion race")
Fixes: 2ad9d774 ("netfilter: conntrack: free extension area immediately")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

syzbot reports following warn:
WARNING: CPU: 0 PID: 3600 at net/netfilter/nfnetlink.c:703 nfnetlink_unbind+0x357/0x3b0 net/netfilter/nfnetlink.c:694

The syzbot generated program does this:

socket(AF_NETLINK, SOCK_RAW, NETLINK_NETFILTER) = 3
setsockopt(3, SOL_NETLINK, NETLINK_DROP_MEMBERSHIP, [1], 4) = 0

... which triggers 'WARN_ON_ONCE(nfnlnet->ctnetlink_listeners == 0)' check.

Instead of counting, just enable reporting for every bind request
and check if we still have listeners on unbind.

While at it, also add the needed bounds check on nfnl_group2type[]
access.

Reported-by: <syzbot+4903218f7fba0a2d6226@syzkaller.appspotmail.com>
Reported-by: <syzbot+afd2d80e495f96049571@syzkaller.appspotmail.com>
Fixes: 2794cdb0 ("netfilter: nfnetlink: allow to detect if ctnetlink listeners exist")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.

mv88e6xxx_mdio_register() pass the device node to of_mdiobus_register().
We don't need the device node after it.

Add missing of_node_put() to avoid refcount leak.

Fixes: a3c53be5 ("net: dsa: mv88e6xxx: Support multiple MDIO busses")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
am65_cpsw_init_cpts() and am65_cpsw_nuss_probe() don't release
the refcount in error case.
Add missing of_node_put() to avoid refcount leak.

Fixes: b1f66a5b ("net: ethernet: ti: am65-cpsw-nuss: enable packet timestamping support")
Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The "fsp->location" variable comes from user via ethtool_get_rxnfc().
Check that it is valid to prevent an out of bounds read.

Fixes: 7aab747e ("net: ethernet: mediatek: add ethtool functions to configure RX flows of HW LRO")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In qdisc_run_begin(), smp_mb__before_atomic() used before test_bit()
does not provide any ordering guarantee as test_bit() is not an atomic
operation. This, added to the fact that the spin_trylock() call at
the beginning of qdisc_run_begin() does not guarantee acquire
semantics if it does not grab the lock, makes it possible for the
following statement :

if (test_bit(__QDISC_STATE_MISSED, &qdisc->state))

to be executed before an enqueue operation called before
qdisc_run_begin().

As a result the following race can happen :

           CPU 1                             CPU 2

      qdisc_run_begin()               qdisc_run_begin() /* true */
        set(MISSED)                            .
      /* returns false */                      .
          .                            /* sees MISSED = 1 */
          .                            /* so qdisc not empty */
          .                            __qdisc_run()
          .                                    .
          .                              pfifo_fast_dequeue()
 ----> /* may be done here */                  .
|         .                                clear(MISSED)
|         .                                    .
|         .                                smp_mb __after_atomic();
|         .                                    .
|         .                                /* recheck the queue */
|         .                                /* nothing => exit   */
|   enqueue(skb1)
|         .
|   qdisc_run_begin()
|         .
|     spin_trylock() /* fail */
|         .
|     smp_mb__before_atomic() /* not enough */
|         .
 ---- if (test_bit(MISSED))
        return false;   /* exit */

In the above scenario, CPU 1 and CPU 2 both try to grab the
qdisc->seqlock at the same time. Only CPU 2 succeeds and enters the
bypass code path, where it emits its skb then calls __qdisc_run().

CPU1 fails, sets MISSED and goes down the traditionnal enqueue() +
dequeue() code path. But when executing qdisc_run_begin() for the
second time, after enqueuing its skbuff, it sees the MISSED bit still
set (by itself) and consequently chooses to exit early without setting
it again nor trying to grab the spinlock again.

Meanwhile CPU2 has seen MISSED = 1, cleared it, checked the queue
and found it empty, so it returned.

At the end of the sequence, we end up with skb1 enqueued in the
backlog, both CPUs out of __dev_xmit_skb(), the MISSED bit not set,
and no __netif_schedule() called made. skb1 will now linger in the
qdisc until somebody later performs a full __qdisc_run(). Associated
to the bypass capacity of the qdisc, and the ability of the TCP layer
to avoid resending packets which it knows are still in the qdisc, this
can lead to serious traffic "holes" in a TCP connection.

We fix this by replacing the smp_mb__before_atomic() / test_bit() /
set_bit() / smp_mb__after_atomic() sequence inside qdisc_run_begin()
by a single test_and_set_bit() call, which is more concise and
enforces the needed memory barriers.

Fixes: 89837eb4 ("net: sched: add barrier to ensure correct ordering for lockless qdisc")
Signed-off-by: Vincent Ray <vray@kalrayinc.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220526001746.2437669-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

At the moment, if devm_of_phy_get() returns an error the serdes
simply isn't set. While it is bad to ignore an error in general, there
is a particular bug that network isn't working if the serdes driver is
compiled as a module. In that case, devm_of_phy_get() returns
-EDEFER_PROBE and the error is silently ignored.

The serdes is optional, it is not there if the port is using RGMII, in
which case devm_of_phy_get() returns -ENODEV. Rearrange the error
handling so that -ENODEV will be handled but other error codes will
abort the probing.

Fixes: d28d6d2e ("net: lan966x: add port module support")
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220525231239.1307298-1-michael@walle.ccSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Fix UAF when creating non-stateful expression in set.

2) Set limit cost when cloning expression accordingly, from Phil Sutter.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nft_limit: Clone packet limits' cost value
  netfilter: nf_tables: disallow non-stateful expression in sets earlier
====================

Link: https://lore.kernel.org/r/20220526205411.315136-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When cloning a packet-based limit expression, copy the cost value as
well. Otherwise the new limit is not functional anymore.

Fixes: 3b9e2ea6 ("netfilter: nft_limit: move stateful fields out of expression data")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Since 3e135cd4 ("netfilter: nft_dynset: dynamic stateful expression
instantiation"), it is possible to attach stateful expressions to set
elements.

cd5125d8 ("netfilter: nf_tables: split set destruction in deactivate
and destroy phase") introduces conditional destruction on the object to
accomodate transaction semantics.

nft_expr_init() calls expr->ops->init() first, then check for
NFT_STATEFUL_EXPR, this stills allows to initialize a non-stateful
lookup expressions which points to a set, which might lead to UAF since
the set is not properly detached from the set->binding for this case.
Anyway, this combination is non-sense from nf_tables perspective.

This patch fixes this problem by checking for NFT_STATEFUL_EXPR before
expr->ops->init() is called.

The reporter provides a KASAN splat and a poc reproducer (similar to
those autogenerated by syzbot to report use-after-free errors). It is
unknown to me if they are using syzbot or if they use similar automated
tool to locate the bug that they are reporting.

For the record, this is the KASAN splat.

[   85.431824] ==================================================================
[   85.432901] BUG: KASAN: use-after-free in nf_tables_bind_set+0x81b/0xa20
[   85.433825] Write of size 8 at addr ffff8880286f0e98 by task poc/776
[   85.434756]
[   85.434999] CPU: 1 PID: 776 Comm: poc Tainted: G        W         5.18.0+ #2
[   85.436023] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014

Fixes: 0b2d8a7b ("netfilter: nf_tables: add helper functions for expression handling")
Reported-and-tested-by: Aaron Adams <edg-e@nccgroup.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

"make dt_binding_check":

    Documentation/devicetree/bindings/net/adi,adin.yaml:40:77: [error] syntax error: mapping values are not allowed here (syntax)

The first line of the description ends with a colon, hence the block
needs to be marked with a "|".

Fixes: 1f77204e ("dt-bindings: net: adin: document phy clock output properties")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/6fcef2665a6cd86a021509a84c5956ec2efd93ed.1653401420.git.geert+renesas@glider.beSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Yuwei reported that plain reuse of DELAY_PROBE_TIME to rearm work queue
in neigh_managed_work is problematic if user explicitly configures the
DELAY_PROBE_TIME to 0 for a neighbor table. Such misconfig can then hog
CPU to 100% processing the system work queue. Instead, set lower interval
bound to HZ which is totally sufficient. Yuwei is additionally looking
into making the interval separately configurable from DELAY_PROBE_TIME.
Reported-by: Yuwei Wang <wangyuweihx@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/netdev/797c3c53-ce1b-9f60-e253-cda615788f4a@iogearbox.netReviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/3b8c5aa906c52c3a8c995d1b2e8ccf650ea7c716.1653432794.git.daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In the process of checking whether RDMAv2 is available, the current
implementation first sets ini->smcrv2.ib_dev_v2, and then allocates
smc buf desc and register rmb, but the latter may fail. In this case,
the pointer should be reset.

Fixes: e49300a6 ("net/smc: add listen processing for SMC-Rv2")
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20220525085408.812273-1-liuyacan@corp.netease.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The psock_snd test sends and receives packets over loopback, and
the test results depend on parameter settings:
Set rp_filter=0,
or set rp_filter=1 and accept_local=1
so that the test will pass. Otherwise, this test will fail with
Resource temporarily unavailable:
sudo ./psock_snd.sh
dgram
tx: 128
rx: 142
./psock_snd: recv: Resource temporarily unavailable

For most distro kernel releases(like Ubuntu or Centos), the parameter
rp_filter is enabled by default, so it's necessary to enable the
parameter lo.accept_local in psock_snd test. And this test runs
inside a netns, changing a sysctl is fine.
Signed-off-by: luyun <luyun@kylinos.cn>
Reviewed-by: Jackie Liu <liuyun01@kylinos.cn>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20220525031819.866684-1-luyun_611@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

is_single_shot should return false for the power_of_2 mask

Fixes: bec67592 ("ptp: ptp_clockmatrix: Add PTP_CLK_REQ_EXTTS support")
Signed-off-by: Min Li <min.li.xe@renesas.com>
Link: https://lore.kernel.org/r/1653403501-12621-1-git-send-email-min.li.xe@renesas.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

am65-cpsw-nuss driver incorrectly uses fwnode member of common
ethernet device's "struct device_node" instead of using fwnode
member of the port's "struct device_node" in phylink_create().
This results in all ports having the same phy data when there
are multiple ports with their phy properties populated in their
respective nodes rather than the common ethernet device node.

Fix it here by using fwnode member of the port's node.

Fixes: e8609e69 ("net: ethernet: ti: am65-cpsw: Convert to PHYLINK")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20220524062558.19296-1-s-vadapalli@ti.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Taehee Yoo says:

====================
amt: fix several bugs

This patchset fixes several bugs in amt module

First patch fixes typo.

Second patch fixes wrong return value of amt_update_handler().
A relay finds a tunnel if it receives an update message from the gateway.
If it can't find a tunnel, amt_update_handler() should return an error,
not success. But it always returns success.

Third patch fixes a possible memory leak in amt_rcv().
A skb would not be freed if an amt interface doesn't have a socket.
====================

Link: https://lore.kernel.org/r/20220523161708.29518-1-ap420073@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If an amt receives packets and it finds socket.
If it can't find a socket, it should free a received skb.
But it doesn't.
So, a memory leak would possibly occur.

Fixes: cbc21dc1 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If a relay receives an update message, it lookup a tunnel.
and if there is no tunnel for that message, it should be treated
as an error, not a success.
But amt_update_handler() returns false, which means success.

Fixes: cbc21dc1 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

AMT_MSG_TEARDOWM is defined,
But it should be AMT_MSG_TEARDOWN.

Fixes: b9022b53 ("amt: add control plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking updates from Jakub Kicinski:
 "Core
  ----

   - Support TCPv6 segmentation offload with super-segments larger than
     64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).

   - Generalize skb freeing deferral to per-cpu lists, instead of
     per-socket lists.

   - Add a netdev statistic for packets dropped due to L2 address
     mismatch (rx_otherhost_dropped).

   - Continue work annotating skb drop reasons.

   - Accept alternative netdev names (ALT_IFNAME) in more netlink
     requests.

   - Add VLAN support for AF_PACKET SOCK_RAW GSO.

   - Allow receiving skb mark from the socket as a cmsg.

   - Enable memcg accounting for veth queues, sysctl tables and IPv6.

  BPF
  ---

   - Add libbpf support for User Statically-Defined Tracing (USDTs).

   - Speed up symbol resolution for kprobes multi-link attachments.

   - Support storing typed pointers to referenced and unreferenced
     objects in BPF maps.

   - Add support for BPF link iterator.

   - Introduce access to remote CPU map elements in BPF per-cpu map.

   - Allow middle-of-the-road settings for the
     kernel.unprivileged_bpf_disabled sysctl.

   - Implement basic types of dynamic pointers e.g. to allow for
     dynamically sized ringbuf reservations without extra memory copies.

  Protocols
  ---------

   - Retire port only listening_hash table, add a second bind table
     hashed by port and address. Avoid linear list walk when binding to
     very popular ports (e.g. 443).

   - Add bridge FDB bulk flush filtering support allowing user space to
     remove all FDB entries matching a condition.

   - Introduce accept_unsolicited_na sysctl for IPv6 to implement
     router-side changes for RFC9131.

   - Support for MPTCP path manager in user space.

   - Add MPTCP support for fallback to regular TCP for connections that
     have never connected additional subflows or transmitted
     out-of-sequence data (partial support for RFC8684 fallback).

   - Avoid races in MPTCP-level window tracking, stabilize and improve
     throughput.

   - Support lockless operation of GRE tunnels with seq numbers enabled.

   - WiFi support for host based BSS color collision detection.

   - Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.

   - Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).

   - Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).

   - Allow matching on the number of VLAN tags via tc-flower.

   - Add tracepoint for tcp_set_ca_state().

  Driver API
  ----------

   - Improve error reporting from classifier and action offload.

   - Add support for listing line cards in switches (devlink).

   - Add helpers for reporting page pool statistics with ethtool -S.

   - Add support for reading clock cycles when using PTP virtual clocks,
     instead of having the driver convert to time before reporting. This
     makes it possible to report time from different vclocks.

   - Support configuring low-latency Tx descriptor push via ethtool.

   - Separate Clause 22 and Clause 45 MDIO accesses more explicitly.

  New hardware / drivers
  ----------------------

   - Ethernet:
      - Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
      - Sunplus SP7021 SoC (sp7021_emac)
      - Add support for Renesas RZ/V2M (in ravb)
      - Add support for MediaTek mt7986 switches (in mtk_eth_soc)

   - Ethernet PHYs:
      - ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
      - TI DP83TD510 PHY
      - Microchip LAN8742/LAN88xx PHYs

   - WiFi:
      - Driver for pureLiFi X, XL, XC devices (plfxlc)
      - Driver for Silicon Labs devices (wfx)
      - Support for WCN6750 (in ath11k)
      - Support Realtek 8852ce devices (in rtw89)

   - Mobile:
      - MediaTek T700 modems (Intel 5G 5000 M.2 cards)

   - CAN:
      - ctucanfd: add support for CTU CAN FD open-source IP core from
        Czech Technical University in Prague

  Drivers
  -------

   - Delete a number of old drivers still using virt_to_bus().

   - Ethernet NICs:
      - intel: support TSO on tunnels MPLS
      - broadcom: support multi-buffer XDP
      - nfp: support VF rate limiting
      - sfc: use hardware tx timestamps for more than PTP
      - mlx5: multi-port eswitch support
      - hyper-v: add support for XDP_REDIRECT
      - atlantic: XDP support (including multi-buffer)
      - macb: improve real-time perf by deferring Tx processing to NAPI

   - High-speed Ethernet switches:
      - mlxsw: implement basic line card information querying
      - prestera: add support for traffic policing on ingress and egress

   - Embedded Ethernet switches:
      - lan966x: add support for packet DMA (FDMA)
      - lan966x: add support for PTP programmable pins
      - ti: cpsw_new: enable bc/mc storm prevention

   - Qualcomm 802.11ax WiFi (ath11k):
      - Wake-on-WLAN support for QCA6390 and WCN6855
      - device recovery (firmware restart) support
      - support setting Specific Absorption Rate (SAR) for WCN6855
      - read country code from SMBIOS for WCN6855/QCA6390
      - enable keep-alive during WoWLAN suspend
      - implement remain-on-channel support

   - MediaTek WiFi (mt76):
      - support Wireless Ethernet Dispatch offloading packet movement
        between the Ethernet switch and WiFi interfaces
      - non-standard VHT MCS10-11 support
      - mt7921 AP mode support
      - mt7921 IPv6 NS offload support

   - Ethernet PHYs:
      - micrel: ksz9031/ksz9131: cabletest support
      - lan87xx: SQI support for T1 PHYs
      - lan937x: add interrupt support for link detection"

* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
  ptp: ocp: Add firmware header checks
  ptp: ocp: fix PPS source selector debugfs reporting
  ptp: ocp: add .init function for sma_op vector
  ptp: ocp: vectorize the sma accessor functions
  ptp: ocp: constify selectors
  ptp: ocp: parameterize input/output sma selectors
  ptp: ocp: revise firmware display
  ptp: ocp: add Celestica timecard PCI ids
  ptp: ocp: Remove #ifdefs around PCI IDs
  ptp: ocp: 32-bit fixups for pci start address
  Revert "net/smc: fix listen processing for SMC-Rv2"
  ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
  selftests/bpf: Dynptr tests
  bpf: Add dynptr data slices
  bpf: Add bpf_dynptr_read and bpf_dynptr_write
  bpf: Dynptr support for ring buffers
  bpf: Add bpf_dynptr_from_mem for local dynptrs
  bpf: Add verifier support for dynptrs
  bpf: Suppress 'passing zero to PTR_ERR' warning
  bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
  ...

Pull workqueue update from Tejun Heo:
 "A lone commit fixing CPU offline handling for per-cpu wq workers so
  that they don't bother isolated CPUs"

* 'for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Restrict kworker in the offline CPU pool running on housekeeping CPUs

Pull cgroup updates from Tejun Heo:
 "Nothing too interesting. This adds cpu controller selftests and there
  are a couple code cleanup patches"

* 'for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: remove the superfluous judgment
  cgroup: Make cgroup_debug static
  kseltest/cgroup: Make test_stress.sh work if run interactively
  kselftest/cgroup: fix test_stress.sh to use OUTPUT dir
  cgroup: Add config file to cgroup selftest suite
  cgroup: Add test_cpucg_max_nested() testcase
  cgroup: Add test_cpucg_max() testcase
  cgroup: Add test_cpucg_nested_weight_underprovisioned() testcase
  cgroup: Adding test_cpucg_nested_weight_overprovisioned() testcase
  cgroup: Add test_cpucg_weight_underprovisioned() testcase
  cgroup: Add test_cpucg_weight_overprovisioned() testcase
  cgroup: Add test_cpucg_stats() testcase to cgroup cpu selftests
  cgroup: Add new test_cpu.c test suite in cgroup selftests

Merge tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit updates from Shuah Khan:
 "Several fixes, cleanups, and enhancements to tests and framework:

   - introduce _NULL and _NOT_NULL macros to pointer error checks

   - rework kunit_resource allocation policy to fix memory leaks when
     caller doesn't specify free() function to be used when allocating
     memory using kunit_add_resource() and kunit_alloc_resource() funcs.

   - add ability to specify suite-level init and exit functions"

* tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (41 commits)
  kunit: tool: Use qemu-system-i386 for i386 runs
  kunit: fix executor OOM error handling logic on non-UML
  kunit: tool: update riscv QEMU config with new serial dependency
  kcsan: test: use new suite_{init,exit} support
  kunit: tool: Add list of all valid test configs on UML
  kunit: take `kunit_assert` as `const`
  kunit: tool: misc cleanups
  kunit: tool: minor cosmetic cleanups in kunit_parser.py
  kunit: tool: make parser stop overwriting status of suites w/ no_tests
  kunit: tool: remove dead parse_crash_in_log() logic
  kunit: tool: print clearer error message when there's no TAP output
  kunit: tool: stop using a shell to run kernel under QEMU
  kunit: tool: update test counts summary line format
  kunit: bail out of test filtering logic quicker if OOM
  lib/Kconfig.debug: change KUnit tests to default to KUNIT_ALL_TESTS
  kunit: Rework kunit_resource allocation policy
  kunit: fix debugfs code to use enum kunit_status, not bool
  kfence: test: use new suite_{init/exit} support, add .kunitconfig
  kunit: add ability to specify suite-level init and exit functions
  kunit: rename print_subtest_{start,end} for clarity (s/subtest/suite)
  ...

Merge tag 'linux-kselftest-next-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:
 "Several fixes, cleanups, and enhancements to tests:

   - add mips support for kprobe args string and syntax tests

   - updates to resctrl test to use kselftest framework

   - fixes, cleanups, and enhancements to tests"

* tag 'linux-kselftest-next-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kselftests/ir : Improve readability of modprobe error message
  selftests/resctrl: Fix null pointer dereference on open failed
  selftests/resctrl: Add missing SPDX license to Makefile
  selftests/resctrl: Update README about using kselftest framework to build/run resctrl_tests
  selftests/resctrl: Make resctrl_tests run using kselftest framework
  selftests/resctrl: Fix resctrl_tests' return code to work with selftest framework
  selftests/resctrl: Change the default limited time to 120 seconds
  selftests/resctrl: Kill child process before parent process terminates if SIGTERM is received
  selftests/resctrl: Print a message if the result of MBM&CMT tests is failed on Intel CPU
  selftests/resctrl: Extend CPU vendor detection
  selftests/x86/corrupt_xstate_header: Use provided __cpuid_count() macro
  selftests/x86/amx: Use provided __cpuid_count() macro
  selftests/vm/pkeys: Use provided __cpuid_count() macro
  selftests: Provide local define of __cpuid_count()
  selftests/damon: add damon to selftests root Makefile
  selftests/binderfs: Improve message to provide more info
  selftests: mqueue: drop duplicate min definition
  selftests/ftrace: add mips support for kprobe args syntax tests
  selftests/ftrace: add mips support for kprobe args string tests

Pull documentation updates from Jonathan Corbet:
 "It was a moderately busy cycle for documentation; highlights include:

   - After a long period of inactivity, the Japanese translations are
     seeing some much-needed maintenance and updating.

   - Reworked IOMMU documentation

   - Some new documentation for static-analysis tools

   - A new overall structure for the memory-management documentation.
     This is an LSFMM outcome that, it is hoped, will help encourage
     developers to fill in the many gaps. Optimism is eternal...but
     hopefully it will work.

   - More Chinese translations.

  Plus the usual typo fixes, updates, etc"

* tag 'docs-5.19' of git://git.lwn.net/linux: (70 commits)
  docs: pdfdocs: Add space for chapter counts >= 100 in TOC
  docs/zh_CN: Add dev-tools/gdb-kernel-debugging.rst Chinese translation
  input: Docs: correct ntrig.rst typo
  input: Docs: correct atarikbd.rst typos
  MAINTAINERS: Become the docs/zh_CN maintainer
  docs/zh_CN: fix devicetree usage-model translation
  mm,doc: Add new documentation structure
  Documentation: drop more IDE boot options and ide-cd.rst
  Documentation/process: use scripts/get_maintainer.pl on patches
  MAINTAINERS: Add entry for DOCUMENTATION/JAPANESE
  docs/trans/ja_JP/howto: Don't mention specific kernel versions
  docs/ja_JP/SubmittingPatches: Request summaries for commit references
  docs/ja_JP/SubmittingPatches: Add Suggested-by as a standard signature
  docs/ja_JP/SubmittingPatches: Randy has moved
  docs/ja_JP/SubmittingPatches: Suggest the use of scripts/get_maintainer.pl
  docs/ja_JP/SubmittingPatches: Update GregKH links
  Documentation/sysctl: document max_rcu_stall_to_panic
  Documentation: add missing angle bracket in cgroup-v2 doc
  Documentation: dev-tools: use literal block instead of code-block
  docs/zh_CN: add vm numa translation
  ...

Pull printk updates from Petr Mladek:

 - Offload writing printk() messages on consoles to per-console
   kthreads.

   It prevents soft-lockups when an extensive amount of messages is
   printed. It was observed, for example, during boot of large systems
   with a lot of peripherals like disks or network interfaces.

   It prevents live-lockups that were observed, for example, when
   messages about allocation failures were reported and a CPU handled
   consoles instead of reclaiming the memory. It was hard to solve even
   with rate limiting because it would need to take into account the
   amount of messages and the speed of all consoles.

   It is a must to have for real time. Otherwise, any printk() might
   break latency guarantees.

   The per-console kthreads allow to handle each console on its own
   speed. Slow consoles do not longer slow down faster ones. And
   printk() does not longer unpredictably slows down various code paths.

   There are situations when the kthreads are either not available or
   not reliable, for example, early boot, suspend, or panic. In these
   situations, printk() uses the legacy mode and tries to handle
   consoles immediately.

 - Add documentation for the printk index.

* tag 'printk-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk, tracing: fix console tracepoint
  printk: remove @console_locked
  printk: extend console_lock for per-console locking
  printk: add kthread console printers
  printk: add functions to prefer direct printing
  printk: add pr_flush()
  printk: move buffer definitions into console_emit_next_record() caller
  printk: refactor and rework printing logic
  printk: add con_printk() macro for console details
  printk: call boot_delay_msec() in printk_delay()
  printk: get caller_id/timestamp after migration disable
  printk: wake waiters for safe and NMI contexts
  printk: wake up all waiters
  printk: add missing memory barrier to wake_up_klogd()
  printk: cpu sync always disable interrupts
  printk: rename cpulock functions
  printk/index: Printk index feature documentation
  MAINTAINERS: Add printk indexing maintainers on mention of printk_index

Pull slab updates from Vlastimil Babka:

 - Conversion of slub_debug stack traces to stackdepot, allowing more
   useful debugfs-based inspection for e.g. memory leak debugging.
   Allocation and free debugfs info now includes full traces and is
   sorted by the unique trace frequency.

   The stackdepot conversion was already attempted last year but
   reverted by ae14c63a. The memory overhead (while not actually
   enabled on boot) has been meanwhile solved by making the large
   stackdepot allocation dynamic. The xfstest issues haven't been
   reproduced on current kernel locally nor in -next, so the slab cache
   layout changes that originally made that bug manifest were probably
   not the root cause.

 - Refactoring of dma-kmalloc caches creation.

 - Trivial cleanups such as removal of unused parameters, fixes and
   clarifications of comments.

 - Hyeonggon Yoo joins as a reviewer.

* tag 'slab-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  MAINTAINERS: add myself as reviewer for slab
  mm/slub: remove unused kmem_cache_order_objects max
  mm: slab: fix comment for __assume_kmalloc_alignment
  mm: slab: fix comment for ARCH_KMALLOC_MINALIGN
  mm/slub: remove unneeded return value of slab_pad_check
  mm/slab_common: move dma-kmalloc caches creation into new_kmalloc_cache()
  mm/slub: remove meaningless node check in ___slab_alloc()
  mm/slub: remove duplicate flag in allocate_slab()
  mm/slub: remove unused parameter in setup_object*()
  mm/slab.c: fix comments
  slab, documentation: add description of debugfs files for SLUB caches
  mm/slub: sort debugfs output by frequency of stack traces
  mm/slub: distinguish and print stack traces in debugfs files
  mm/slub: use stackdepot to save stack trace in objects
  mm/slub: move struct track init out of set_track()
  lib/stackdepot: allow requesting early initialization dynamically
  mm/slub, kunit: Make slub_kunit unaffected by user specified flags
  mm/slab: remove some unused functions

Commit c724c866 ("linux/types.h: remove unnecessary __bitwise__")
was right that there are no users of __bitwise__ in the kernel, but it
turns out there are user space users of it that do expect it.

It is, after all, in the uapi directory, so user space usage is to be
expected.

Instead of reverting the commit completely, let's just clarify the
situation so that it doesn't happen again, and have some in-code
explanations for why that "__bitwise__" still exists.
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Link: https://lore.kernel.org/all/b5c0a68d-8387-4909-beea-f70ab9e6e3d5@kernel.org/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit b2a90f4f ("media: lirc: remove unused lirc features") removed
feature flags which were never implemented, but they are still used by
the lirc daemon went built from source.

Reinstate these symbols in order not to break the lirc build.

Fixes: b2a90f4f ("media: lirc: remove unused lirc features")
Link: https://lore.kernel.org/all/a0470450-ecfd-2918-e04a-7b57c1fd7694@kernel.org/Reported-by: Jiri Slaby <jirislaby@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull page cache updates from Matthew Wilcox:

 - Appoint myself page cache maintainer

 - Fix how scsicam uses the page cache

 - Use the memalloc_nofs_save() API to replace AOP_FLAG_NOFS

 - Remove the AOP flags entirely

 - Remove pagecache_write_begin() and pagecache_write_end()

 - Documentation updates

 - Convert several address_space operations to use folios:
     - is_dirty_writeback
     - readpage becomes read_folio
     - releasepage becomes release_folio
     - freepage becomes free_folio

 - Change filler_t to require a struct file pointer be the first
   argument like ->read_folio

* tag 'folio-5.19' of git://git.infradead.org/users/willy/pagecache: (107 commits)
  nilfs2: Fix some kernel-doc comments
  Appoint myself page cache maintainer
  fs: Remove aops->freepage
  secretmem: Convert to free_folio
  nfs: Convert to free_folio
  orangefs: Convert to free_folio
  fs: Add free_folio address space operation
  fs: Convert drop_buffers() to use a folio
  fs: Change try_to_free_buffers() to take a folio
  jbd2: Convert release_buffer_page() to use a folio
  jbd2: Convert jbd2_journal_try_to_free_buffers to take a folio
  reiserfs: Convert release_buffer_page() to use a folio
  fs: Remove last vestiges of releasepage
  ubifs: Convert to release_folio
  reiserfs: Convert to release_folio
  orangefs: Convert to release_folio
  ocfs2: Convert to release_folio
  nilfs2: Remove comment about releasepage
  nfs: Convert to release_folio
  jfs: Convert to release_folio
  ...

Pull iomap updates from Darrick Wong:
 "There's a couple of corrections sent in by Andreas for some accounting
  errors.

  The biggest change this time around is that writeback errors longer
  clear pageuptodate nor does XFS invalidate the page cache anymore.
  This brings XFS (and gfs2/zonefs) behavior in line with every other
  Linux filesystem driver, and fixes some UAF bugs that only cropped up
  after willy turned on multipage folios for XFS in 5.18-rc1.

  Regrettably, it took all the way to the end of the 5.18 cycle to find
  the source of these bugs and reach a consensus that XFS' writeback
  failure behavior from 20 years ago is no longer necessary.

  Summary:

   - Fix a couple of accounting errors in the buffered io code.

   - Discontinue the practice of marking folios !uptodate and
     invalidating them when writeback fails.

     This fixes some UAF bugs when multipage folios are enabled, and
     brings the behavior of XFS/gfs/zonefs into alignment with the
     behavior of all the other Linux filesystems"

* tag 'iomap-5.19-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: don't invalidate folios after writeback errors
  iomap: iomap_write_end cleanup
  iomap: iomap_write_failed fix

Pull dlm updates from David Teigland:
 "This includes several large patches to improve endian handling and
  remove sparse warnings. The code previously used in/out, in-place
  endianness conversion functions.

  Other code cleanup includes the list iterator changes.

  Finally, a long standing bug was found and fixed, caused by missed
  decrement on an lock struct ref count"

* tag 'dlm-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: (28 commits)
  dlm: use kref_put_lock in __put_lkb
  dlm: use kref_put_lock in put_rsb
  dlm: remove unnecessary error assign
  dlm: fix missing lkb refcount handling
  fs: dlm: cast resource pointer to uintptr_t
  dlm: replace usage of found with dedicated list iterator variable
  dlm: remove usage of list iterator for list_add() after the loop body
  dlm: fix pending remove if msg allocation fails
  dlm: fix wake_up() calls for pending remove
  dlm: check required context while close
  dlm: cleanup lock handling in dlm_master_lookup
  dlm: remove found label in dlm_master_lookup
  dlm: remove __user conversion warnings
  dlm: move conversion to compile time
  dlm: use __le types for dlm messages
  dlm: use __le types for rcom messages
  dlm: use __le types for dlm header
  dlm: use __le types for options header
  dlm: add __CHECKER__ for false positives
  dlm: move global to static inits
  ...

Pull ext4 updates from Ted Ts'o:
 "Various bug fixes and cleanups for ext4.

  In particular, move the crypto related fucntions from fs/ext4/super.c
  into a new fs/ext4/crypto.c, and fix a number of bugs found by fuzzers
  and error injection tools"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
  ext4: only allow test_dummy_encryption when supported
  ext4: fix bug_on in __es_tree_search
  ext4: avoid cycles in directory h-tree
  ext4: verify dir block before splitting it
  ext4: filter out EXT4_FC_REPLAY from on-disk superblock field s_state
  ext4: fix bug_on in ext4_writepages
  ext4: refactor and move ext4_ioctl_get_encryption_pwsalt()
  ext4: cleanup function defs from ext4.h into crypto.c
  ext4: move ext4 crypto code to its own file crypto.c
  ext4: fix memory leak in parse_apply_sb_mount_options()
  ext4: reject the 'commit' option on ext2 filesystems
  ext4: remove duplicated #include of dax.h in inode.c
  ext4: fix race condition between ext4_write and ext4_convert_inline_data
  ext4: convert symlink external data block mapping to bdev
  ext4: add nowait mode for ext4_getblk()
  ext4: fix journal_ioprio mount option handling
  ext4: mark group as trimmed only if it was fully scanned
  ext4: fix use-after-free in ext4_rename_dir_prepare
  ext4: add unmount filesystem message
  ext4: remove unnecessary conditionals
  ...

Pull gfs2 updates from Andreas Gruenbacher:

 - Clean up the allocation of glocks that have an address space attached

 - Quota locking fix and quota iomap conversion

 - Fix the FITRIM error reporting

 - Some list iterator cleanups

* tag 'gfs2-v5.18-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Convert function bh_get to use iomap
  gfs2: use i_lock spin_lock for inode qadata
  gfs2: Return more useful errors from gfs2_rgrp_send_discards()
  gfs2: Use container_of() for gfs2_glock(aspace)
  gfs2: Explain some direct I/O oddities
  gfs2: replace 'found' with dedicated list iterator variable

Pull btrfs updates from David Sterba:
 "Features:

   - subpage:
      - support for PAGE_SIZE > 4K (previously only 64K)
      - make it work with raid56

   - repair super block num_devices automatically if it does not match
     the number of device items

   - defrag can convert inline extents to regular extents, up to now
     inline files were skipped but the setting of mount option
     max_inline could affect the decision logic

   - zoned:
      - minimal accepted zone size is explicitly set to 4MiB
      - make zone reclaim less aggressive and don't reclaim if there are
        enough free zones
      - add per-profile sysfs tunable of the reclaim threshold

   - allow automatic block group reclaim for non-zoned filesystems, with
     sysfs tunables

   - tree-checker: new check, compare extent buffer owner against owner
     rootid

  Performance:

   - avoid blocking on space reservation when doing nowait direct io
     writes (+7% throughput for reads and writes)

   - NOCOW write throughput improvement due to refined locking (+3%)

   - send: reduce pressure to page cache by dropping extent pages right
     after they're processed

  Core:

   - convert all radix trees to xarray

   - add iterators for b-tree node items

   - support printk message index

   - user bulk page allocation for extent buffers

   - switch to bio_alloc API, use on-stack bios where convenient, other
     bio cleanups

   - use rw lock for block groups to favor concurrent reads

   - simplify workques, don't allocate high priority threads for all
     normal queues as we need only one

   - refactor scrub, process chunks based on their constraints and
     similarity

   - allocate direct io structures on stack and pass around only
     pointers, avoids allocation and reduces potential error handling

  Fixes:

   - fix count of reserved transaction items for various inode
     operations

   - fix deadlock between concurrent dio writes when low on free data
     space

   - fix a few cases when zones need to be finished

  VFS, iomap:

   - add helper to check if sb write has started (usable for assertions)

   - new helper iomap_dio_alloc_bio, export iomap_dio_bio_end_io"

* tag 'for-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (173 commits)
  btrfs: zoned: introduce a minimal zone size 4M and reject mount
  btrfs: allow defrag to convert inline extents to regular extents
  btrfs: add "0x" prefix for unsupported optional features
  btrfs: do not account twice for inode ref when reserving metadata units
  btrfs: zoned: fix comparison of alloc_offset vs meta_write_pointer
  btrfs: send: avoid trashing the page cache
  btrfs: send: keep the current inode open while processing it
  btrfs: allocate the btrfs_dio_private as part of the iomap dio bio
  btrfs: move struct btrfs_dio_private to inode.c
  btrfs: remove the disk_bytenr in struct btrfs_dio_private
  btrfs: allocate dio_data on stack
  iomap: add per-iomap_iter private data
  iomap: allow the file system to provide a bio_set for direct I/O
  btrfs: add a btrfs_dio_rw wrapper
  btrfs: zoned: zone finish unused block group
  btrfs: zoned: properly finish block group on metadata write
  btrfs: zoned: finish block group when there are no more allocatable bytes left
  btrfs: zoned: consolidate zone finish functions
  btrfs: zoned: introduce btrfs_zoned_bg_is_full
  btrfs: improve error reporting in lookup_inline_extent_backref
  ...