- 24 May, 2016 5 commits
-
-
Michal Kazior authored
Recent changes revolving around implementing wake_tx_queue support introduced a significant performance regressions on some (slower, uni-proc) systems. Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com>
-
Vasanthakumar Thiagarajan authored
QCA9984 shares the same configuration with QCA99X0. Signed-off-by:
Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by:
-
Vasanthakumar Thiagarajan authored
QCA9984 Rx descriptor has two 32-bit words of location information when compared to one 32-bit word in QCA99X0. To handle this difference in rx descriptor ppdu_end, define a new ppdu_end for QCA9984 descriptor which has the new structure to represent rx_location_info. Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Store pci chip secific reset funtions in struct ath10k_pci as callbacks during early ath10k_pci_probe() and use the callback to perform chip specific resets. This patch essentially adds two callback in ath10k_pci, one for doing soft reset and the other for hard reset. By using callbacks we can get rid of those hw revision checks in ath10k_pci_safe_chip_reset() and ath10k_pci_chip_reset(). As such this patch does not fix any issue. Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Define rx_location_info in struct rx_ppdu_end_qca99x0 after rx_pkt_end. This is to prepare rx_ppdu_end for QCA9984 chip. Signed-off-by:
-
- 11 May, 2016 16 commits
-
-
Kalle Valo authored
ath.git patches for 4.7. Major changes: ath6kl * add ability to set debug uart baud rate with a module parameter wil6210 * add debugfs file to configure firmware led functionality
-
Vasanthakumar Thiagarajan authored
In QCA4019, cycle counter wraparound in same fashion as QCA988X. When the cycle counter wraparound it resets to 0x7fffffff. Set has_shifted_cc_wraparound to true for QCA4019 to enable the code path to handle cycle counter wraparound for consistent survey report. Signed-off-by:
-
Vasanthakumar Thiagarajan authored
In 10.4, fw sends WMI PEER_RATECODE_LIST_EVENTID after successful peer_assoc cmd. As of now this event is not of much use and not implemented. Change the debug level and messsage as appropriate to suppress "Unknown eventid: 36898". Signed-off-by:
-
Maya Erez authored
Add the ability to configure the device led to be used for notifying the AP activity (60G device supports leds 0-2). The host can also configure the blinking frequency of the led in three states. Signed-off-by:
Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by:
-
Dan Carpenter authored
Smatch complains that we cap the upper bound of "fwrq->m" but not the lower bound. I don't know if it can actually happen but it's simple enough to check for negatives. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Dan Carpenter authored
I'm not sure if this can underflow but Smatch complains. It seems harmless to add a check for negatives. Signed-off-by:
-
Wei-Ning Huang authored
Use dev_err instead of pr_err and add newline character at the end. Signed-off-by:
Wei-Ning Huang <wnhuang@chromium.org> Signed-off-by:
-
wang yanqing authored
We can't use kfree_skb in irq disable context, because spin_lock_irqsave make sure we are always in irq disable context, use dev_kfree_skb_irq instead of kfree_skb is better than dev_kfree_skb_any. This patch fix below kernel warning: [ 7612.095528] ------------[ cut here ]------------ [ 7612.095546] WARNING: CPU: 3 PID: 4460 at kernel/softirq.c:150 __local_bh_enable_ip+0x58/0x80() [ 7612.095550] Modules linked in: rtl8723be x86_pkg_temp_thermal btcoexist rtl_pci rtlwifi rtl8723_common [ 7612.095567] CPU: 3 PID: 4460 Comm: ifconfig Tainted: G W 4.4.0+ #4 [ 7612.095570] Hardware name: LENOVO 20DFA04FCD/20DFA04FCD, BIOS J5ET48WW (1.19 ) 08/27/2015 [ 7612.095574] 00000000 00000000 da37fc70 c12ce7c5 00000000 da37fca0 c104cc59 c19d4454 [ 7612.095584] 00000003 0000116c c19d4784 00000096 c10508a8 c10508a8 00000200 c1b42400 [ 7612.095594] f29be780 da37fcb0 c104ccad 00000009 00000000 da37fcbc c10508a8 f21f08b8 [ 7612.095604] Call Trace: [ 7612.095614] [<c12ce7c5>] dump_stack+0x41/0x5c [ 7612.095620] [<c104cc59>] warn_slowpath_common+0x89/0xc0 [ 7612.095628] [<c10508a8>] ? __local_bh_enable_ip+0x58/0x80 [ 7612.095634] [<c10508a8>] ? __local_bh_enable_ip+0x58/0x80 [ 7612.095640] [<c104ccad>] warn_slowpath_null+0x1d/0x20 [ 7612.095646] [<c10508a8>] __local_bh_enable_ip+0x58/0x80 [ 7612.095653] [<c16b7d34>] destroy_conntrack+0x64/0xa0 [ 7612.095660] [<c16b300f>] nf_conntrack_destroy+0xf/0x20 [ 7612.095665] [<c1677565>] skb_release_head_state+0x55/0xa0 [ 7612.095670] [<c16775bb>] skb_release_all+0xb/0x20 [ 7612.095674] [<c167760b>] __kfree_skb+0xb/0x60 [ 7612.095679] [<c16776f0>] kfree_skb+0x30/0x70 [ 7612.095686] [<f81b869d>] ? rtl_pci_reset_trx_ring+0x22d/0x370 [rtl_pci] [ 7612.095692] [<f81b869d>] rtl_pci_reset_trx_ring+0x22d/0x370 [rtl_pci] [ 7612.095698] [<f81b87f9>] rtl_pci_start+0x19/0x190 [rtl_pci] [ 7612.095705] [<f81970e6>] rtl_op_start+0x56/0x90 [rtlwifi] [ 7612.095712] [<c17e3f16>] drv_start+0x36/0xc0 [ 7612.095717] [<c17f5ab3>] ieee80211_do_open+0x2d3/0x890 [ 7612.095725] [<c16820fe>] ? call_netdevice_notifiers_info+0x2e/0x60 [ 7612.095730] [<c17f60bd>] ieee80211_open+0x4d/0x50 [ 7612.095736] [<c16891b3>] __dev_open+0xa3/0x130 [ 7612.095742] [<c183fa53>] ? _raw_spin_unlock_bh+0x13/0x20 [ 7612.095748] [<c1689499>] __dev_change_flags+0x89/0x140 [ 7612.095753] [<c127c70d>] ? selinux_capable+0xd/0x10 [ 7612.095759] [<c1689589>] dev_change_flags+0x29/0x60 [ 7612.095765] [<c1700b93>] devinet_ioctl+0x553/0x670 [ 7612.095772] [<c12db758>] ? _copy_to_user+0x28/0x40 [ 7612.095777] [<c17018b5>] inet_ioctl+0x85/0xb0 [ 7612.095783] [<c166e647>] sock_ioctl+0x67/0x260 [ 7612.095788] [<c166e5e0>] ? sock_fasync+0x80/0x80 [ 7612.095795] [<c115c99b>] do_vfs_ioctl+0x6b/0x550 [ 7612.095800] [<c127c812>] ? selinux_file_ioctl+0x102/0x1e0 [ 7612.095807] [<c10a8914>] ? timekeeping_suspend+0x294/0x320 [ 7612.095813] [<c10a256a>] ? __hrtimer_run_queues+0x14a/0x210 [ 7612.095820] [<c1276e24>] ? security_file_ioctl+0x34/0x50 [ 7612.095827] [<c115cef0>] SyS_ioctl+0x70/0x80 [ 7612.095832] [<c1001804>] do_fast_syscall_32+0x84/0x120 [ 7612.095839] [<c183ff91>] sysenter_past_esp+0x36/0x55 [ 7612.095844] ---[ end trace 97e9c637a20e8348 ]--- Signed-off-by:
Wang YanQing <udknight@gmail.com> Cc: Stable <stable@vger.kernel.org> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
wang yanqing authored
rtl_lps_enter does two successive check for cnt_after_linked to make sure some time has elapsed after linked. The second check isn't necessary, because if cnt_after_linked is bigger than 5, it is bigger than 2 of course! This patch remove the second check code. Signed-off-by:
-
Christian Daudt authored
This adds support for the 4356-sdio wireless chip. Signed-off-by:
Christian Daudt <csd@broadcom.com> Signed-off-by:
-
Dan Carpenter authored
What about if "rtlphy->pwrgroup_cnt" is 2? In that case we would use an uninitialized "chnlgroup" variable and probably crash. Maybe that can't happen for some reason which is not obvious but in that case this patch is harmless. Setting it to zero seems like a standard default in the surrounding code so it's probably fine here as well. Signed-off-by:
-
Lukas Wunner authored
This header file is only needed for drivers binding to a PCI bridge device allocated by drivers/pci/pcie/portdrv_core.c. The mwifiex driver doesn't do that nor use any symbols defined in pcieport_if.h. Cc: Amitkumar Karwar <akarwar@marvell.com> Cc: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
wang yanqing authored
In commit a269913c ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue"), the tests for enter/exit power-save mode were inverted. With this change applied, the wifi connection becomes much more stable. Fixes: a269913c ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue") Signed-off-by:
-
Julia Lawall authored
The rtl_intf_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Guy Mishol authored
The commit fb724ed5 ("wlcore: Fix regression in wlcore_set_partition()") fixed wl12xx functionality. However, it reverted the support in fw logger over sdio in wl18xx. This patch reverts the changes made and also fixes the original functionality issue introduced in wl12xx. Fixes: fb724ed5 ("wlcore: Fix regression in wlcore_set_partition()") Signed-off-by:
Guy Mishol <guym@ti.com> Signed-off-by:
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2016-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * work for RX multiqueue continues (Sara); * dynamic queue allocation work continues (Liad); * add Luca as maintainer; * a bunch of fixes and improvements all over;
-
- 10 May, 2016 19 commits
-
-
Luca Coelho authored
I'm starting to take a more active role in the iwlwifi driver maintainership. Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by:Luca Coelho <luciano.coelho@intel.com>
-
Emmanuel Grumbach authored
Small change to make it clear that the default value is false. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Sara Sharon authored
When initializing RX we grab NIC access for every read and write. This is redundant - we can just grab access once. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
-
Sara Sharon authored
The RX queues have a shadow register for the write pointer that enables updates without grabbing NIC access. Use them instead of the periphery registers because accessing those is much more expensive. Signed-off-by:
-
Liad Kaufman authored
In non-shared queues, DQA requires re-configuring existing queues to become aggregated rather than allocating a new one. It also requires "un-aggregating" an existing queue when aggregations are turned off. Support this requirement for non-shared queues. Signed-off-by:
Liad Kaufman <liad.kaufman@intel.com> Signed-off-by:
-
Johannes Berg authored
Since msleep is based on jiffies, it can sleep for a long time. Use usleep_range() instead to shorten the maximum time. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
Newer hardware generations will take longer to be accessible again after reset, so we need to wait longer before continuing any flow that did a reset. Rather than make the wait time configurable, simply extend it for all. Since all of these code paths can sleep, use usleep_range() rather than mdelay(). Signed-off-by:
-
Gregory Greenman authored
Devices supporting VHT 160MHz width are supporting also Short GI. Turn on this capability in vht cap. Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Signed-off-by:
-
Johannes Berg authored
Since we have a lot of configuration structs (almost 70) saving some memory in each one of them leads to an overall saving of ~2.6KiB of memory. Signed-off-by:
-
Emmanuel Grumbach authored
The commit below added code to dump the content of FIFOs that are present only on dual CPU products (8000 and up). This broke 7265D whose firmware does advertise IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG but doesn't have 2 CPUs. The current code does check the length of the FIFO before dumping them (and the nonexistent FIFO has a 0 length), but we still accessed a register to set the FIFO number and that made the DMA unhappy. The impact was a much longer recovery upon firmware assert. Fixes: 5b086414 ("iwlwifi: mvm: support dumping UMAC internal txfifos") Signed-off-by:
-
Emmanuel Grumbach authored
This Kconfig option allows to load a firmware for debugging with a different name. This mechanism has not been used for a few years now and replacing the firmware file works as well. Kill this Kconfig option and all the code that goes with it. Signed-off-by:
-
Sara Sharon authored
Getting the mvm station out of station id requires dereferencing the station id to get ieee80211_sta, then checking for pointer validity and only then extract mvm station out. Given that there are helpers to do it - use them instead of duplicating the code whenever we need only mvm station. Signed-off-by:
-
Sara Sharon authored
iwl_phy_db_set_section() is get called only from atomic context, the alloc_ctx parameter is not needed. Remove it. Signed-off-by:
-
Sara Sharon authored
Driver is agnostic to the number of the phy_db entries and only serves the firmware as a pipe to move the data from init image to RT image. As the size of the arrays may change (as it does in 9000 device) allocate it dynamically. Firmware sends the largest index first so we can use this to know how much we should allocate. Signed-off-by:
-
Sara Sharon authored
Our device supports only 160 GHz and not 80+80. Fix VHT flag accordingly. Signed-off-by:
-
Sara Sharon authored
Up till now, the reorder buffer uses standard spec based comparison when comparing the buffer status to NSSN. This indeed works for the regular case, since we shouldn't cross the 2048 boundary without getting a frame release notification. However, this is problematic due to packet filtering that may be performed by the FW while we are in d0i3. Theoretically we may filter over 2048 packets, and then the check of the NSSN will get incorrect. Change the comparison to always trust nssn unless it is 64 or less frames behind the head - which might happen due to a timeout. This new comparison is to be used only when comparing reorder buffer head with nssn, and not when comparing the packet SN to nssn or reorder buffer head. Put this in a separate commit as the logic is a bit tricky and stands for its own commit message. Signed-off-by:
-
Haim Dreyfuss authored
CSR registers are always available even when the NIC is not awake, no need to wake up the NIC before accessing them. This has a huge impact when we re-enable an interrupt at the end of the ISR since waking up the NIC can take some time. Signed-off-by:
Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by:
-
Haim Dreyfuss authored
Previous patch had changed firmware name convention for new generation product. The firmware name is now longer than the former convention. Adapt max firmware name length to the new convention. Fixes: e1ba684f ("iwlwifi: 8000: fix MODULE_FIRMWARE input") Signed-off-by:
-
Sara Sharon authored
Currently code allows mvm reference to become negative and only warns in case mvm reference is released while reference counting is 0. However, we better prevent this from happening at all since iwl_mvm_unref() may race against iwl_mvm_unref_all_except() which is called on restart. As a result we might get the same reference unreferenced twice ending with a negative value: An example for an easily reproduced log: [ 2689.909166] iwl_mvm_ref Take mvm reference - type 8 [ 2690.732716] iwl_mvm_unref_all_except Cleanup: remove mvm ref type 8 (1) [ 2690.849708] iwl_mvm_unref Leave mvm reference - type 8 [ 2690.849721] WARNING: ... iwl_mvm_unref+0xb0/0xc0 [iwlmvm]() If there will be yet another another restart iwl_mvm_unref_all_except will run from 0 up to ref count, and since it is unsigned, we will throw the transport ref count completely out of balance: iwl_mvm_unref_all_except[I] -- Cleanup: remove mvm ref type 8 (255) iwl_trans_slv_unref[I] -- rpm counter: 0 iwl_trans_slv_unref[I] -- rpm counter: -1 iwl_trans_slv_unref[I] -- rpm counter: -2 ... iwl_trans_slv_unref[I] -- rpm counter: -253 iwl_trans_slv_unref[I] -- rpm counter: -254 As there is no valid scenario where we can get to a negative reference count - prevent it from happening. Signed-off-by:
-
