- 27 Mar, 2012 2 commits
-
-
Santosh Yaraganavi authored
This patch adds support for Universal Flash Storage(UFS) host controllers. The UFS host controller driver includes host controller initialization method. The Initialization process involves following steps: - Initiate UFS Host Controller initialization process by writing to Host controller enable register - Configure UFS Host controller registers with host memory space datastructure offsets. - Unipro link startup procedure - Check for connected device - Configure UFS host controller to process requests - Enable required interrupts - Configure interrupt aggregation [jejb: fix warnings in 32 bit compile] Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com> Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com> Reviewed-by: Arnd Bergmann <arnd@linaro.org> Reviewed-by: Vishak G <vishak.g@samsung.com> Reviewed-by: Girish K S <girish.shivananjappa@linaro.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Petr Uzel authored
Signed-off-by: Petr Uzel <petr.uzel@suse.cz> Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
- 19 Mar, 2012 1 commit
-
-
Lan Tianyu authored
The sd_check_event() will be called periodly even when the device is in the suspended status to check media event. The scsi_test_unit_ready() in the sd_check_event() will issue scsi cmd request. Issuing scsi request when the device is in the suspeneded status will cause problem. For example, when a usb flash disk in the suspended status, scsi_test_unit_ready() issues a scsi request. The request will be returned as failed because the usb device is not active. The patch adds scsi_autopm_get_device() and scsi_autopm_put_device() around scsi_test_unit_ready() in the sd_check_event() to resolve such problem. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
- 29 Feb, 2012 37 commits
-
-
Vikas Chaudhary authored
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
1. Do not initialise globals to 0 2. Fix wrong spelling in debug message 3. Modified debug log messages Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
Fix following warning:- drivers/scsi/qla4xxx/ql4_os.c:35:5: warning: symbol 'ql4xdisablesysfsboot' was not declared. Should it be static? drivers/scsi/qla4xxx/ql4_iocb.c:461:5: warning: symbol 'qla4xxx_send_mbox_iocb' was not declared. Should it be static? drivers/scsi/qla4xxx/ql4_os.c:3025:6: warning: symbol 'qla4xxx_do_work' was not declared. Should it be static? Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Manish Rangankar authored
This patch will allow iscsiadm to create multiple session for the same target on per host. Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Mike Christie authored
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Mike Christie authored
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Nilesh Javali authored
For offload iSCSI like qla4xxx CHAP entries are stored in FLASH. This patch adds support to list CHAP entries stored in FLASH and delete specified CHAP entry from FLASH using iscsi tools. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Nilesh Javali authored
For offload iSCSI like qla4xxx CHAP entries are stored in FLASH. This patch adds support to list CHAP entries stored in FLASH and delete specified CHAP entry from FLASH using iscsi tools. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Santosh Nayak authored
1. Fix endian issue. 2. Fix the following warning : " drivers/scsi/pm8001/pm8001_hwi.c:2932:32: warning: comparison between ‘enum sas_device_type’ and ‘enum sas_dev_type’". 3. Few code optimization. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Santosh Nayak authored
There is a possble racing scenario. 'process_oq' is called by two routines, as shown below. pm8001_8001_dispatch = { ....... .isr = pm8001_chip_isr --> process_oq,// A .isr_process_oq = process_oq, // B ..... } process_oq() --> process_one_iomb() --> mpi_sata_completion() In 'mpi_sata_completion', "pm8001_ha->lock" is first released. It means lock is taken before, which is true for the context A, as 'pm8001_ha->lock' is taken in 'pm8001_chip_isr()' But for context B there is no lock taken before and pm8001_ha->lock is unlocked in 'mpi_sata_completion()'. This may unlock the lock taken in context A. Possible racing ?? If 'pm8001_ha->lock' is taken in 'process_oq()' instead of 'pm8001_chip_isr' then the above issue can be avoided. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Santosh Nayak authored
Static checker is giving following warning: " error: calling 'spin_unlock_irqrestore()' with bogus flags" The code flow is as shown below: process_oq() --> process_one_iomb --> mpi_sata_completion In 'mpi_sata_completion' the first call for 'spin_unlock_irqrestore()' is with flags=0, which is as good as 'spin_unlock_irq()' ( unconditional interrupt enabling). So for better performance 'spin_unlock_irqrestore()' can be replaced with 'spin_unlock_irq()' and 'spin_lock_irqsave()' can be replaced by 'spin_lock_irq()'. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Wayne Boyer authored
This patch updates some PCI ID definitions for new adapters based on the next generation 64 bit IOA PCI interface chip. Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Carpenter authored
This silences a static checker warning. Also we're always adding new types of firmware, so it might fix a bug in real life some day. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Andrzej Jakowski authored
This patch fixes scenario where driver removal should be possible only when driver is in READY state. Also it removes redundant invocation of routine disabling SCU interrupts - this method is called somewhere else in driver deinitialization path. Signed-off-by: Andrzej Jakowski <andrzej.jakowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
isci occasionally spews messages like: isci 0000:03:00.0: sci_phy_event_handler: PHY starting substate machine received unexpected event_code b3940000 ...which is not very helpful, since we don't know which controller, which phy, the exact state, or a decode of the event. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
Debugging the driver requires tracing the state transtions and tracing state names is less work than decoding numbers. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
If userspace requests a phy reset, treat that as a request for the phy to be enabled since that is the effect on hardware. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
If userspace has decided to disable a phy the kernel should honor that and not inadvertantly re-enable the phy via error recovery. This is more straightforward in the sata case where link recovery (via libata-eh) is separate from sas_task cancelling in libsas-eh. Teach libsas to accept -ENODEV as a successful response from I_T_nexus_reset ('successful' in terms of not escalating further). This is a more comprehensive fix then "libsas: don't recover 'gone' devices in sas_ata_hard_reset()", as it is no longer sata-specific. aic94xx does check the return value from sas_phy_reset() so if the phy is disabled we proceed with clearing the I_T_nexus. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
If discovery returns 0 for target_port_protocols but shows an attached sata device, just report SAS_PROTOCOL_SATA in the identify data so userspace can reliably search for sata devices in the domain. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
Before: $ cat /sys/class/sas_phy/phy-6\:3/device_type none $ cat /sys/class/sas_phy/phy-6\:3/target_port_protocols none After: $ cat /sys/class/sas_phy/phy-6\:3/device_type end device $ cat /sys/class/sas_phy/phy-6\:3/target_port_protocols sata Also downgrade the phy_list_lock to _irq instead of _irqsave since libsas will never call sas_get_port_device with interrupts disbled. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
libata issues follow up srsts when the controller has a hard time recording the signature-fis after a reset, or if the link supports port multipliers. libsas does not support port multipliers and no current libsas lldds appear to need help retrieving the signature fis. Revert it for now to remove confusion. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
Until all sas_tasks are known to no longer be in-flight this flag gates late completions from colliding with error handling. However, it must be cleared prior to the submission of scsi_send_eh_cmnd() requests, otherwise those commands will never be completed correctly. This was spotted by slub debug: ============================================================================= BUG sas_task: Objects remaining on kmem_cache_close() ----------------------------------------------------------------------------- INFO: Slab 0xffffea001f0eba00 objects=34 used=1 fp=0xffff8807c3aecb00 flags=0x8000000000004080 Pid: 22919, comm: modprobe Not tainted 3.2.0-isci+ #2 Call Trace: [<ffffffff810fcdcd>] slab_err+0xb0/0xd2 [<ffffffff810e1c50>] ? free_percpu+0x31/0x117 [<ffffffff81100122>] ? kzalloc+0x14/0x16 [<ffffffff81100122>] ? kzalloc+0x14/0x16 [<ffffffff81100486>] kmem_cache_destroy+0x11d/0x270 [<ffffffffa0112bdc>] sas_class_exit+0x10/0x12 [libsas] [<ffffffff81078fba>] sys_delete_module+0x1c4/0x23c [<ffffffff814797ba>] ? sysret_check+0x2e/0x69 [<ffffffff8126479e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81479782>] system_call_fastpath+0x16/0x1b INFO: Object 0xffff8807c3aed280 @offset=21120 INFO: Allocated in sas_alloc_task+0x22/0x90 [libsas] age=4615311 cpu=2 pid=12966 __slab_alloc.clone.3+0x1d1/0x234 kmem_cache_alloc+0x52/0x10d sas_alloc_task+0x22/0x90 [libsas] sas_queuecommand+0x20e/0x230 [libsas] scsi_send_eh_cmnd+0xd1/0x30c scsi_eh_try_stu+0x4f/0x6b scsi_eh_ready_devs+0xba/0x6ef sas_scsi_recover_host+0xa35/0xab1 [libsas] scsi_error_handler+0x14b/0x5fa kthread+0x9d/0xa5 kernel_thread_helper+0x4/0x10 Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
libsas ata error handling is already async but this does not help the scan case. Move initial link recovery out from under host->scan_mutex, and delay synchronization with eh until after all port probe/recovery work has been queued. Device ordering is maintained with scan order by still calling sas_rphy_add() in order of domain discovery. Since we now scan the domain list when invoking libata-eh we need to be careful to check for fully initialized ata ports. Acked-by: Jack Wang <jack_wang@usish.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
ata devices are always scanned after ssp. Prior to the ata error handling reworks libsas would tend to scan devices in ascending expander phy order. Restore this ordering by deferring ssp discovery to a DISCE_PROBE event, and keep the probe order consistent with the discovery order, not the placement of sata devices. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
If the phy is attached to a new sas address unregister the first address before processing the new attachment. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
libsas fails to discover all sata devices in the domain. If a device fails negotiation and does not transmit a signature fis the link needs recovery. libata already understands how to manage slow to come up links, so treat these conditions as ata device attach events for the purposes of creating an ata_port. This allows libata to manage retrying link bring up. Rediscovery is modified to be careful about checking changes in dev_type. It looks like libsas leaks old devices if the sas address changes, but that's a fix for another patch. Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
Make sas-port naming consistent with the expander-attached case whereby the phy-id is the last digit in the port name. Otherwise we get the random behavior of the allocation order. Reported-by: Patrick Thomson <patrick.s.thomson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
It's difficult to determine which domain_device is triggering error recovery, so convert messages like: sas: ex 5001b4da000e703f phy08:T attached: 5001b4da000e7028 sas: ex 5001b4da000e703f phy09:T attached: 5001b4da000e7029 ... ata7: sas eh calling libata port error handler ata8: sas eh calling libata port error handler ...into: sas: ex 5001517e85cfefff phy05:T:9 attached: 5001517e85cfefe5 (stp) sas: ex 5001517e3b0af0bf phy11:T:8 attached: 5001517e3b0af0ab (stp) ... sas: ata7: end_device-21:1: dev error handler sas: ata8: end_device-20:0:5: dev error handler which shows attached link rate, device type, and associates a domain_device with its ata_port id to correlate messages emitted from libata-eh. As Doug notes, we can also take the opportunity to clarify expander phy routing capabilities. [dgilbert@interlog.com: clarify table2table with 'U'] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Maciej Trela authored
Holdover from a patch rework, prior to the addition of SAS_DEV_DESTROY we were holding a reference while the destruct was pending in case the domain was torn down before the desctruct event ran. That case is covered by SAS_DEV_DESTROY, and the sas_put_device() just corrupts freed memory, or worse frees the memory while another agent holds a reference. Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
We need to hold drain_mutex across the unregistration as port down events queue device removal as chained events, so we need to make sure no other drainers are active. [ 1118.673968] WARNING: at kernel/workqueue.c:996 __queue_work+0x11a/0x326() [ 1118.681982] Hardware name: S2600CP [ 1118.686193] Modules linked in: isci(-) libsas scsi_transport_sas nls_utf8 ipv6 uinput sg iTCO_wdt iTCO_vendor_support i2c_i801 i2c_core ioatdma dca sd_mod sr_mod cdrom ahci libahci libata [last unloaded: scsi_transport_sas] [ 1118.709893] Pid: 6831, comm: rmmod Not tainted 3.2.0-isci+ #1 [ 1118.716727] Call Trace: [ 1118.719867] [<ffffffff8103e9f5>] warn_slowpath_common+0x85/0x9d [ 1118.727000] [<ffffffff8103ea27>] warn_slowpath_null+0x1a/0x1c [ 1118.733942] [<ffffffff81056d44>] __queue_work+0x11a/0x326 [ 1118.740481] [<ffffffff81056f99>] queue_work_on+0x1b/0x22 [ 1118.746925] [<ffffffff81057106>] queue_work+0x37/0x3e [ 1118.753105] [<ffffffffa0120e05>] ? sas_discover_event+0x55/0x82 [libsas] [ 1118.761094] [<ffffffff813217c3>] scsi_queue_work+0x42/0x44 [ 1118.767717] [<ffffffffa0120e19>] sas_discover_event+0x69/0x82 [libsas] [ 1118.775509] [<ffffffffa0120f5b>] sas_unregister_dev+0xc3/0xcc [libsas] [ 1118.783319] [<ffffffffa0120fae>] sas_unregister_domain_devices+0x4a/0xc8 [libsas] [ 1118.792731] [<ffffffffa0120071>] sas_deform_port+0x60/0x1a6 [libsas] [ 1118.800339] [<ffffffffa01201ea>] sas_unregister_ports+0x33/0x44 [libsas] [ 1118.808342] [<ffffffffa011f7e5>] sas_unregister_ha+0x41/0x6b [libsas] [ 1118.816055] [<ffffffffa0134055>] isci_unregister+0x22/0x4d [isci] [ 1118.823384] [<ffffffffa0143040>] isci_pci_remove+0x2e/0x60 [isci] Reported-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
Similar to the conversion of the transport-class reset we want bsg initiated resets to be managed by libata. Reported-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
If we have a domain with sas and sata devices there may still be sas recovery actions to take after peeling off the commands to send to libata. Reported-by: Andrzej Jakowski <andrzej.jakowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
ata_port lifetime in libata follows the host. In libsas it follows the scsi_target. Once scsi_remove_device() has caused all commands to be completed it allows scsi_remove_target() to immediately proceed to freeing the ata_port causing bug reports like: [ 848.393333] BUG: spinlock bad magic on CPU#4, kworker/u:2/5107 [ 848.400262] general protection fault: 0000 [#1] SMP [ 848.406244] CPU 4 [ 848.408310] Modules linked in: nls_utf8 ipv6 uinput i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support ioatdma dca sg sd_mod sr_mod cdrom ahci libahci isci libsas libata scsi_transport_sas [last unloaded: scsi_wait_scan] [ 848.432060] [ 848.434137] Pid: 5107, comm: kworker/u:2 Not tainted 3.2.0-isci+ #8 Intel Corporation S2600CP/S2600CP [ 848.445310] RIP: 0010:[<ffffffff8126a68c>] [<ffffffff8126a68c>] spin_dump+0x5e/0x8c [ 848.454787] RSP: 0018:ffff8807f868dca0 EFLAGS: 00010002 [ 848.461137] RAX: 0000000000000048 RBX: ffff8807fe86a630 RCX: ffffffff817d0be0 [ 848.469520] RDX: 0000000000000000 RSI: ffffffff814af1cf RDI: 0000000000000002 [ 848.477959] RBP: ffff8807f868dcb0 R08: 00000000ffffffff R09: 000000006b6b6b6b [ 848.486327] R10: 000000000003fb8c R11: ffffffff81a19448 R12: 6b6b6b6b6b6b6b6b [ 848.494699] R13: ffff8808027dc520 R14: 0000000000000000 R15: 000000000000001e [ 848.503067] FS: 0000000000000000(0000) GS:ffff88083fd00000(0000) knlGS:0000000000000000 [ 848.512899] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 848.519710] CR2: 00007ff77d001000 CR3: 00000007f7a5d000 CR4: 00000000000406e0 [ 848.528072] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 848.536446] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 848.544831] Process kworker/u:2 (pid: 5107, threadinfo ffff8807f868c000, task ffff8807ff348000) [ 848.555327] Stack: [ 848.557959] ffff8807fe86a630 ffff8807fe86a630 ffff8807f868dcd0 ffffffff8126a6e0 [ 848.567072] ffffffff817c142f ffff8807fe86a630 ffff8807f868dcf0 ffffffff8126a703 [ 848.576190] ffff8808027dc520 0000000000000286 ffff8807f868dd10 ffffffff814af1bb [ 848.585281] Call Trace: [ 848.588409] [<ffffffff8126a6e0>] spin_bug+0x26/0x28 [ 848.594357] [<ffffffff8126a703>] do_raw_spin_unlock+0x21/0x88 [ 848.601283] [<ffffffff814af1bb>] _raw_spin_unlock_irqrestore+0x2c/0x65 [ 848.609089] [<ffffffffa001c103>] ata_scsi_port_error_handler+0x548/0x557 [libata] [ 848.618331] [<ffffffff81061813>] ? async_schedule+0x17/0x17 [ 848.625060] [<ffffffffa004f30f>] async_sas_ata_eh+0x45/0x69 [libsas] [ 848.632655] [<ffffffff810618aa>] async_run_entry_fn+0x97/0x125 [ 848.639670] [<ffffffff81057439>] process_one_work+0x207/0x38d [ 848.646577] [<ffffffff8105738c>] ? process_one_work+0x15a/0x38d [ 848.653681] [<ffffffff810576f7>] worker_thread+0x138/0x21c [ 848.660305] [<ffffffff810575bf>] ? process_one_work+0x38d/0x38d [ 848.667493] [<ffffffff8105b098>] kthread+0x9d/0xa5 [ 848.673382] [<ffffffff8106e1bd>] ? trace_hardirqs_on_caller+0x12f/0x166 [ 848.681304] [<ffffffff814b7704>] kernel_thread_helper+0x4/0x10 [ 848.688324] [<ffffffff814af534>] ? retint_restore_args+0x13/0x13 [ 848.695530] [<ffffffff8105affb>] ? __init_kthread_worker+0x5b/0x5b [ 848.702929] [<ffffffff814b7700>] ? gs_change+0x13/0x13 [ 848.709155] Code: 00 00 48 8d 88 38 04 00 00 44 8b 80 84 02 00 00 31 c0 e8 cf 1b 24 00 41 83 c8 ff 44 8b 4b 08 48 c7 c1 e0 0b 7d 81 4d 85 e4 74 10 <45> 8b 84 24 84 02 00 00 49 8d 8c 24 38 04 00 00 8b 53 04 48 89 [ 848.732467] RIP [<ffffffff8126a68c>] spin_dump+0x5e/0x8c [ 848.738905] RSP <ffff8807f868dca0> [ 848.743743] ---[ end trace 143161646eee8caa ]--- ...so arrange for the ata_port to have the same end of life as the domain device. Reported-by: Marcin Tomczak <marcin.tomczak@intel.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
If the top level expander is hot removed, mark all child devices as gone before unregistration to short circuit futile recovery. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
When scrolling forward through the eh list (in a clear_q scenario) it is possible to encounter commands that won the completion vs eh race. Rather than sprinkle more "if (!task)" throughout the handler just make a pass through the list and delete the race winners before handling the rest. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
Prior to commit 61aaff49 "isci: filter broadcast change notifications during SMP phy resets" we borrowed the MVS_DEV_EH approach from the mvsas driver for preventing ->lldd_I_T_nexus_reset() events during ata discovery. This hack was protecting against the old ->phy_reset() in ata_bus_probe(), but since the conversion to the new error handling this hack is preventing resets from reaching ata devices. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Dan Williams authored
Remove ->eh_device_reset_handler() and ->eh_bus_reset_handler() for the same reason they are not implemented for libata hosts, they cannot be implemented reliably with ata-eh. ATA error recovery wants to divert all resets to the eh thread and wait for completion, these handlers may be invoked from a non-blocking ioctl. The other path they are called from is libsas-eh, and if we escalate past I_T_nexus reset we have larger problems i.e. tear down all in-flight commands in the domain potentially without notification to the lldd if it has chosen not to implement ->lldd_clear_nexus_port() / ->lldd_clear_nexus_ha(). Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-