- 24 Apr, 2020 4 commits
-
-
Shahar S Matityahu authored
Support multiple debug data collection triggers in legacy flow. Utilize the already existing Yoyo infra so the change is rather simple. Signed-off-by:
Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200417131727.5be6a1923cbe.I10701236b03f66328041f2a38f5f0f22a26fd40b@changeid
-
Mordechay Goodstein authored
The API version lookup is parsed from a TLV and should be in shared code make make it reusable across all opmodes. Also change the function names from mvm to fw, since this is not mvm-specific anymore. Additionally, since this function is not just a single line of code, it shouldn't be inline. Convert them to actual functions. Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by:
-
Tova Mussai authored
Use iwl_nl80211_band_from_channel_idx in iwl_parse_nvm_mcc_info Signed-off-by:
Tova Mussai <tova.mussai@intel.com> Signed-off-by:
-
Tova Mussai authored
The fw already supports scan api v14 and the firmware version that supports only v13 was not published, so we can remove support for v13 in the driver. Signed-off-by:
-
- 23 Apr, 2020 9 commits
-
-
Ping-Ke Shih authored
Implement rtw_chip_ops::phy_set_param and ::mac_init to initialize mac/bb/rf, and they are used during interface up. The procedure contains power on sequence registers, download firmware, load predefined parameters, mac/bb/rf specific register and etc. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200422034607.28747-9-yhchuang@realtek.com
-
Ping-Ke Shih authored
TX FIFO size is 32k and it was divided into 256 pages with 128 bytes. A boundary is used to split pages into two parts, head part is used to store TX packets coming from host, and tail part is reserved for special purposes, such as beacon packet, null data packet and so on. The TX packets coming from host have many categories, such as VO, VI, BE, BK, MG and etc. When going into head part of TX FIFO, they are classified to four priority queue named low, normal, high and extra priority queues. Each priority queue occupies predefined number of page, if a certain priority queue is full, TX packet will store into PUB priority queue. Similarly, RX FIFO is 16k and split into two parts, head part is used to store RX packets, and tail part is 128 bytes and used to store report. Thus, we fill this boundary to register as well. Signed-off-by:
-
Ping-Ke Shih authored
The txagc table is used to map rate_id and txagc register address and mask, and ops set_tx_power_index uses this table to write TX power to corresponding registers. Since 8723D is a 1x1 2.4G 11n chip, only CCK, OFDM and HT_MCS 0-7 are listed in the table. Signed-off-by:
-
Ping-Ke Shih authored
H2C queue is used to send command to firmware. Since 8723D doesn't support this queue, this commit check wlan_cpu flag to avoid to set H2C related registers. Signed-off-by:
-
Ping-Ke Shih authored
The power polling command is one kind of power sequence commands. It's used to check hardware situation, and subsequent comamnds will be executed if hardware is ready. A special case is PCIE must toggle BIT_PFM_WOWL and try again if first try is failed. In order to reduce indentation to understand the code easier, move polling part to a separate function. Then, the 'while (1)...loop' is replaced by two statements to do first try and retry. Signed-off-by:
-
Ping-Ke Shih authored
The mac power-on flow consists of three steps: 1. pre_sys_cfg (Before switching power state) 2. power_switch (Switching power state) 3. init_sys_cfg (Settings after swtiching power state) When switching power state, driver will load and parse the power sequence tables. For 8723D devices, the logics for parsing are most same except for the polling function. 8723D devices need to toggle BIT_PFM_WOWL twice. The settings after power state is switched for 8723D devices are quite different with other devices, extract a legacy function for them. For power-off flow, 8723D devices have the same logic with existing chips. But warning printed if we run power-off sequence in power-off state: rtw_pci 0000:03:00.0: failed to poll offset=0x5f8 mask=0xff value=0x0 The scenario is user do 'ifconfig up' that will run power-on sequence to bring up and then run power-off sequence to enter idle (IEEE80211_CONF_IDLE). Then, user do 'ifconfig down' that will run power-off sequence again, and the warning is shown. Original code check power-on state to avoid to run power-on sequence twice, and this commit extends to check both power-on and power-off states. Signed-off-by:
-
Ping-Ke Shih authored
The firmware of 11AC devices need more information to support more offload functions, such as IQK. And 11N devices such as 8723D does not support offload these function in firmware, there is no need to send these additional information to firmware when it comes to 11N devices. Signed-off-by:
-
Ping-Ke Shih authored
The WLAN CPU of 8723D device is different from others, add legacy firmware download function for it. A new variable wlan_cpu is used to decide which firmware download function we should use. Legacy firmware file contains 32 bytes header including version and subversion. When downloading to wlan cpu, header is excluded. Firmware is downloaded via beacon queue to reserved page that is a part of TX buffer. Since 11N WLAN CPU uses different control registers, this patch introduces related control registers. Signed-off-by:
-
Raz Bouganim authored
This patch adding support for new cipher suite - AES-CMAC in wlcore driver. This patch is required for support PMF/WPA3 connection to install IGTK key. Signed-off-by:
Raz Bouganim <r-bouganim@ti.com> Signed-off-by:
-
- 21 Apr, 2020 15 commits
-
-
Tzu-En Huang authored
8822C devices have power trim, thermal and PA bias values programmed in efuse. Driver should configure the RF components according to the values. If the power trim is not configured, then the devices might have distortion on the output tx power. Signed-off-by:
Tzu-En Huang <tehuang@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
The logical efuse map is decoded from physical map by parsing the header format of the physical map. And each different type of chips has different logical efuse layout. So add the logical map's layout for parsing the efuse contents. Signed-off-by:
-
Ping-Ke Shih authored
8723D devices need to grant efuse access before dumping physical efuse map, other chips don't need it, so keep this ops as blank. Signed-off-by:
-
Ping-Ke Shih authored
Implement rtw_chip_ops::cfg_ldo25 to enable/disable LDO25 with proper voltage. Signed-off-by:
-
Ping-Ke Shih authored
Add corresponding parameter tables for 8723D devices. Since 8723D devices currently have only one RFE type, there is only one entry in rtw8723d_rfe_defs. Signed-off-by:
-
Ping-Ke Shih authored
8723D use SIPI to indirectly read RF register instead of directly read, so introduce a new struct rtw_rf_sipi_addr and new function rtw_phy_read_rf_sipi(). Since other chips don't use the new function, only 8723D needs to fill struct rtw_rf_sipi_addr in rtw_chip_info. Because there are two kinds of functions for reading RF registers now, change rtw_phy_read_rf() to chip->ops->read_rf() in rtw_phy_write_rf_reg_sipi() so that we can switch tp proper RF read functions depends on the type of the chip. Though 8723D is an 1x1 chip, it has two RF PHY and we can switch to one of them, and that should be configured properly. Hence, add a fix_rf_phy_num to struct rtw_chip_info to allow driver to set one of the PHY's registers for 8723D, even it is only 1x1. Another variable rf_phy_num is introduced to keep the constraint number of RF path we can access, and its value is: rf_phy_num = (fix_rf_phy_num ? fix_rf_phy_num : rf_path_num) Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
Add corresponding power sequence for 8723D devices Signed-off-by:
-
Ping-Ke Shih authored
8723D doesn't support beamform because rtw88 only supports VHT beamform but 8723d doesn't have VHT capability. Though 8723d doesn't support beamform, BSS_CHANGED_MU_GROUPS is still marked as changed when doing disassociation. So, add wrapper functions for all beamform ops to make sure they aren't NULL before calling. Signed-off-by:
-
Ping-Ke Shih authored
RTL8723DE is an 11n 1x1 2.4G single band chip with the following capabilities: - TX/RX BD size: 16/8 - TX/RX desc size: 40/24 - physical/logical/protected efuse size: 512/512/96 - TX gain index factor: 1 - max TX power index: 0x3F - band: 2G - HT: support - VHT: Not support Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c:617:14-20: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c:622:13-19: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c:627:14-20: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c:632:13-19: WARNING: Comparison to bool drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c:937:5-13: WARNING: Comparison to bool Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c:79:1-34: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c:81:1-34: WARNING: Assignment of 0/1 to bool variable Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c:77:1-34: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c:79:1-34: WARNING: Assignment of 0/1 to bool variable Reported-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c:78:1-34: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c:80:1-34: WARNING: Assignment of 0/1 to bool variable Reported-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c:81:1-34: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c:83:1-34: WARNING: Assignment of 0/1 to bool variable Reported-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c:70:1-34: WARNING: Assignment of 0/1 to bool variable drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c:72:1-34: WARNING: Assignment of 0/1 to bool variable Reported-by:
-
- 15 Apr, 2020 12 commits
-
-
Nils ANDRÉ-CHANG authored
Signed-off-by:
Nils ANDRÉ-CHANG <nils@nilsand.re> Signed-off-by:
-
Jason Yan authored
This function actually needs no return value. So remove the unneeded variable 'ret' and make it void. This also fixes the following coccicheck warning: drivers/net/wireless/intel/ipw2x00/ipw2200.c:10648:5-8: Unneeded variable: "ret". Return "0" on line 10684 Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/broadcom/brcm80211/brcmsmac/stf.c:309:5-13: Unneeded variable: "ret_code". Return "0" on line 328 Reported-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/intersil/orinoco/spectrum_cs.c:281:5-8: Unneeded variable: "err". Return "0" on line 286 Reported-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/marvell/libertas/cmdresp.c:225:5-8: Unneeded variable: "ret". Return "0" on line 355 Reported-by:
-
Jules Irenge authored
Sparse reports a warning at brcms_down() warning: context imbalance in brcms_down() - unexpected unlock The root cause is the missing annotation at brcms_down() Add the missing __must_hold(&wl->lock) annotation Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Signed-off-by:
-
Jules Irenge authored
Sparse reports a warning at brcms_rfkill_set_hw_state() warning: context imbalance in brcms_rfkill_set_hw_state() - unexpected unlock The root cause is the missing annotation at brcms_rfkill_set_hw_state() Add the missing __must_hold(&wl->lock) annotation Signed-off-by:
-
Jules Irenge authored
Sparse reports warnings at prism2_bss_list_proc_start() and prism2_bss_list_proc_stop() warning: context imbalance in prism2_wds_proc_stop() - unexpected unlock warning: context imbalance in prism2_bss_list_proc_start() - wrong count at exit The root cause is the missing annotations at prism2_bss_list_proc_start() Add the missing __acquires(&local->lock) annotation Add the missing __releases(&local->lock) annotation Signed-off-by:
-
Yan-Hsuan Chuang authored
User space program such as iw can set antenna mask for the device. So add set antenna support by configure the trx mode. This is useful for some tests want to see the output of different antenna configuration (e.g. path A v.s. path B). Signed-off-by:
-
Yan-Hsuan Chuang authored
To support ieee80211_ops::set_antenna, the driver can decide if the antenna mask is accepted, otherwise it can return an error code. Because each chip could have different limitations, let the chip check the mask and return. Also the antenna mask for TRX from upper space is 32-bit long. Change the antenna mask for rtw_chip_ops::set_antenna from u8 to u32. Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/marvell/libertas/mesh.c:833:5-8: Unneeded variable: "ret". Return "0" on line 874 Reported-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/wireless/st/cw1200/cw1200_spi.c:273:5-8: Unneeded variable: "ret". Return "0" on line 279 Reported-by:
-
