PM8916 (and probably some other similar pmics) have hardware blocks for
battery monitoring and charging. Add patterns for respecive nodes so the
devicetree for those blocks can be validated properly.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231120-pm8916-dtsi-bms-lbc-v4-1-4f91056c8252@trvn.ruSigned-off-by: Lee Jones <lee@kernel.org>

Add bindings for PM8937 PMIC (qcom,pm8937). This PMIC is found in
boards with MSM8917, MSM8937, MSM8940 and APQ variants.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Link: https://lore.kernel.org/r/20231121-pm8937-v2-2-b0171ab62075@riseup.netSigned-off-by: Lee Jones <lee@kernel.org>

Add the subtype and compatible strings for PM8937.

The PM8937 is found in various SoCs, including MSM8917, MSM8937,
MSM8940 and APQ variants.
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Link: https://lore.kernel.org/r/20231121-pm8937-v2-1-b0171ab62075@riseup.netSigned-off-by: Lee Jones <lee@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123165627.492259-19-u.kleine-koenig@pengutronix.deSigned-off-by: Lee Jones <lee@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123165627.492259-18-u.kleine-koenig@pengutronix.deSigned-off-by: Lee Jones <lee@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123165627.492259-17-u.kleine-koenig@pengutronix.deSigned-off-by: Lee Jones <lee@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123165627.492259-16-u.kleine-koenig@pengutronix.deSigned-off-by: Lee Jones <lee@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123165627.492259-15-u.kleine-koenig@pengutronix.deSigned-off-by: Lee Jones <lee@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123165627.492259-14-u.kleine-koenig@pengutronix.deSigned-off-by: Lee Jones <lee@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123165627.492259-13-u.kleine-koenig@pengutronix.deSigned-off-by: Lee Jones <lee@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123165627.492259-12-u.kleine-koenig@pengutronix.deSigned-off-by: Lee Jones <lee@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123165627.492259-11-u.kleine-koenig@pengutronix.deSigned-off-by: Lee Jones <lee@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123165627.492259-10-u.kleine-koenig@pengutronix.deSigned-off-by: Lee Jones <lee@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123165627.492259-9-u.kleine-koenig@pengutronix.deSigned-off-by: Lee Jones <lee@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123165627.492259-8-u.kleine-koenig@pengutronix.deSigned-off-by: Lee Jones <lee@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123165627.492259-7-u.kleine-koenig@pengutronix.deSigned-off-by: Lee Jones <lee@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123165627.492259-6-u.kleine-koenig@pengutronix.deSigned-off-by: Lee Jones <lee@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123165627.492259-5-u.kleine-koenig@pengutronix.deSigned-off-by: Lee Jones <lee@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123165627.492259-4-u.kleine-koenig@pengutronix.deSigned-off-by: Lee Jones <lee@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123165627.492259-3-u.kleine-koenig@pengutronix.deSigned-off-by: Lee Jones <lee@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231123165627.492259-2-u.kleine-koenig@pengutronix.deSigned-off-by: Lee Jones <lee@kernel.org>

Previously there was no output for the regmap's registers
in debugfs due to missing "max_register" property in regmap
configuration.
Signed-off-by: Andre Werner <andre.werner@systec-electronic.com>
Link: https://lore.kernel.org/r/20231121063259.13991-1-andre.werner@systec-electronic.comSigned-off-by: Lee Jones <lee@kernel.org>

Since commit 210f418f ("mfd: rk8xx: Add rk806 support"), devices are
registered with "0" as id, causing devices to not have an automatic device id
and prevents having multiple RK8xx PMICs on the same system.

Properly pass PLATFORM_DEVID_AUTO to devm_mfd_add_devices() and since
it will ignore the cells .id with this special value, also cleanup
by removing all now ignored cells .id values.

Now we have the same behaviour as before rk806 introduction and rk806
retains the intended behavior.

This fixes a regression while booting the Odroid Go Ultra on v6.6.1:
sysfs: cannot create duplicate filename '/bus/platform/devices/rk808-clkout'
CPU: 3 PID: 97 Comm: kworker/u12:2 Not tainted 6.6.1 #1
Hardware name: Hardkernel ODROID-GO-Ultra (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace+0x9c/0x11c
show_stack+0x18/0x24
dump_stack_lvl+0x78/0xc4
dump_stack+0x18/0x24
sysfs_warn_dup+0x64/0x80
sysfs_do_create_link_sd+0xf0/0xf8
sysfs_create_link+0x20/0x40
bus_add_device+0x114/0x160
device_add+0x3f0/0x7cc
platform_device_add+0x180/0x270
mfd_add_device+0x390/0x4a8
devm_mfd_add_devices+0xb0/0x150
rk8xx_probe+0x26c/0x410
rk8xx_i2c_probe+0x64/0x98
i2c_device_probe+0x104/0x2e8
really_probe+0x184/0x3c8
__driver_probe_device+0x7c/0x16c
driver_probe_device+0x3c/0x10c
__device_attach_driver+0xbc/0x158
bus_for_each_drv+0x80/0xdc
__device_attach+0x9c/0x1ac
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0xa0/0xf4
process_one_work+0x1bc/0x378
worker_thread+0x1dc/0x3d4
kthread+0x104/0x118
ret_from_fork+0x10/0x20
rk8xx-i2c 0-001c: error -EEXIST: failed to add MFD devices
rk8xx-i2c: probe of 0-001c failed with error -17

Fixes: 210f418f ("mfd: rk8xx: Add rk806 support")
Reported-by: Adam Green <greena88@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20231116-topic-amlogic-upstream-fix-rk8xx-devid-auto-v2-1-3f1bad68ab9d@linaro.orgSigned-off-by: Lee Jones <lee@kernel.org>

platform_get_irq() returns a negative error code to indicate an error.
As does pci_alloc_irq_vectors() and pci_irq_vector(). So in
intel_lpss_probe() the erroneous IRQ would be better returned as is.

The pci_alloc_irq_vectors() call and platform_get_irq() guarantee
that IRQs will not be 0, so we'll drop that check as well.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
[andy: updated commit message]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231106184052.1166579-3-andriy.shevchenko@linux.intel.comSigned-off-by: Lee Jones <lee@kernel.org>

We have a few PCI APIs that may be used instead of direct dereferencing,
Using them will also provide better error codes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231106184052.1166579-2-andriy.shevchenko@linux.intel.comSigned-off-by: Lee Jones <lee@kernel.org>

ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().

This is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/a63f3da5745187f5a9b1e2ec0492f2fe2e0b0b8d.1698854117.git.christophe.jaillet@wanadoo.frSigned-off-by: Lee Jones <lee@kernel.org>

Document the compatible for both sm8250 and sm8350 SoCs.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1698253601-11957-1-git-send-email-quic_mojha@quicinc.comSigned-off-by: Lee Jones <lee@kernel.org>

Convert the Austria MicroSystems AS3711 Quad Buck High Current PMIC with
Charger Device Tree binding documentation to json-schema.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/56a5ebee588696f9022fa29fa8e266c8bdee6fd7.1698228043.git.geert+renesas@glider.beSigned-off-by: Lee Jones <lee@kernel.org>

In preparation for adding multiple CS support for a device, set/get
functions were introduces accessing spi->chip_select in
'commit 303feb3c ("spi: Add APIs in spi core to set/get
spi->chip_select and spi->cs_gpiod")'.
Replace spi->chip_select with spi_get_chipselect() API.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Link: https://lore.kernel.org/r/20231125092137.2948-2-amit.kumar-mahapatra@amd.comSigned-off-by: Lee Jones <lee@kernel.org>

The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))

Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/
Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/
Fixes: b6e3d1ba ("wifi: iwlwifi: mvm: implement new firmware API for statistics")
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc architecture fixes from Helge Deller:

 - Include the upper 5 address bits when inserting TLB entries on a
   64-bit kernel.

   On physical machines those are ignored, but in qemu it's nice to have
   them included and to be correct.

 - Stop the 64-bit kernel and show a warning if someone tries to boot on
   a machine with a 32-bit CPU

 - Fix a "no previous prototype" warning in parport-gsc

* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Prevent booting 64-bit kernels on PA1.x machines
  parport: gsc: mark init function static
  parisc/pgtable: Do not drop upper 5 address bits of physical address

Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - support PREEMPT_DYNAMIC with static keys

 - relax memory ordering for atomic operations

 - support BPF CPU v4 instructions for LoongArch

 - some build and runtime warning fixes

* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  selftests/bpf: Enable cpu v4 tests for LoongArch
  LoongArch: BPF: Support signed mod instructions
  LoongArch: BPF: Support signed div instructions
  LoongArch: BPF: Support 32-bit offset jmp instructions
  LoongArch: BPF: Support unconditional bswap instructions
  LoongArch: BPF: Support sign-extension mov instructions
  LoongArch: BPF: Support sign-extension load instructions
  LoongArch: Add more instruction opcodes and emit_* helpers
  LoongArch/smp: Call rcutree_report_cpu_starting() earlier
  LoongArch: Relax memory ordering for atomic operations
  LoongArch: Mark __percpu functions as always inline
  LoongArch: Disable module from accessing external data directly
  LoongArch: Support PREEMPT_DYNAMIC with static keys

Pull powerpc fixes from Michael Ellerman:

 - Finish a refactor of pgprot_framebuffer() which dependend
   on some changes that were merged via the drm tree

 - Fix some kernel-doc warnings to quieten the bots

Thanks to Nathan Lynch and Thomas Zimmermann.

* tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc
  powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc
  powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code
  powerpc: Remove file parameter from phys_mem_access_prot()
  powerpc/machdep: Remove trailing whitespaces

Pull smb client fixes from Steve French:

 - ctime caching fix (for setxattr)

 - encryption fix

 - DNS resolver mount fix

 - debugging improvements

 - multichannel fixes including cases where server stops or starts
   supporting multichannel after mount

 - reconnect fix

 - minor cleanups

* tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko
  cifs: handle when server stops supporting multichannel
  cifs: handle when server starts supporting multichannel
  Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
  smb3: allow dumping session and tcon id to improve stats analysis and debugging
  smb: client: fix mount when dns_resolver key is not available
  smb3: fix caching of ctime on setxattr
  smb3: minor cleanup of session handling code
  cifs: reconnect work should have reference on server struct
  cifs: do not pass cifs_sb when trying to add channels
  cifs: account for primary channel in the interface list
  cifs: distribute channels across interfaces based on speed
  cifs: handle cases where a channel is closed
  smb3: more minor cleanups for session handling routines
  smb3: minor RDMA cleanup
  cifs: Fix encryption of cleared, but unset rq_iter data buffers

Merge tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probes fixes from Masami Hiramatsu:

 - Documentation update: Add a note about argument and return value
   fetching is the best effort because it depends on the type.

 - objpool: Fix to make internal global variables static in
   test_objpool.c.

 - kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
   same prototypes in asm/kprobes.h for some architectures, but some of
   them are missing the prototype and it causes a warning. So move the
   prototype into linux/kprobes.h.

 - tracing: Fix to check the tracepoint event and return event at
   parsing stage. The tracepoint event doesn't support %return but if
   $retval exists, it will be converted to %return silently. This finds
   that case and rejects it.

 - tracing: Fix the order of the descriptions about the parameters of
   __kprobe_event_gen_cmd_start() to be consistent with the argument
   list of the function.

* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/kprobes: Fix the order of argument descriptions
  tracing: fprobe-event: Fix to check tracepoint event and return
  kprobes: unify kprobes_exceptions_nofify() prototypes
  lib: test_objpool: make global variables static
  Documentation: tracing: Add a note about argument and retval access

Pull fbdev fixes and cleanups from Helge Deller:

 - fix double free and resource leaks in imsttfb

 - lots of remove callback cleanups and section mismatch fixes in
   omapfb, amifb and atmel_lcdfb

 - error code fix and memparse simplification in omapfb

* tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits)
  fbdev: fsl-diu-fb: mark wr_reg_wa() static
  fbdev: amifb: Convert to platform remove callback returning void
  fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning
  fbdev: hyperv_fb: fix uninitialized local variable use
  fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void
  fbdev: omapfb/tfp410: Convert to platform remove callback returning void
  fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void
  fbdev: omapfb/opa362: Convert to platform remove callback returning void
  fbdev: omapfb/hdmi: Convert to platform remove callback returning void
  fbdev: omapfb/dvi: Convert to platform remove callback returning void
  fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void
  fbdev: omapfb/dpi: Convert to platform remove callback returning void
  fbdev: omapfb/analog-tv: Convert to platform remove callback returning void
  fbdev: atmel_lcdfb: Convert to platform remove callback returning void
  fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  ...

The order of descriptions should be consistent with the argument list of
the function, so "kretprobe" should be the second one.

int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe,
                                 const char *name, const char *loc, ...)

Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/

Fixes: 2a588dd1 ("tracing: Add kprobe event command generation functions")
Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Pull drm fixes from Daniel Vetter:
 "Dave's VPN to the big machine died, so it's on me to do fixes pr this
  and next week while everyone else is at plumbers.

   - big pile of amd fixes, but mostly for hw support newly added in 6.7

   - i915 fixes, mostly minor things

   - qxl memory leak fix

   - vc4 uaf fix in mock helpers

   - syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE"

* tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits)
  drm/amdgpu: fix error handling in amdgpu_vm_init
  drm/amdgpu: Fix possible null pointer dereference
  drm/amdgpu: move UVD and VCE sched entity init after sched init
  drm/amdgpu: move kfd_resume before the ip late init
  drm/amd: Explicitly check for GFXOFF to be enabled for s0ix
  drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2)
  drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5)
  drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support
  drm/amdgpu: fix software pci_unplug on some chips
  drm/amd/display: remove duplicated argument
  drm/amdgpu: correct mca debugfs dump reg list
  drm/amdgpu: correct acclerator check architecutre dump
  drm/amdgpu: add pcs xgmi v6.4.0 ras support
  drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3
  drm/amdgpu: disable smu v13.0.6 mca debug mode by default
  drm/amdgpu: Support multiple error query modes
  drm/amdgpu: refine smu v13.0.6 mca dump driver
  drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2)
  drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV
  drm: amd: Resolve Sphinx unexpected indentation warning
  ...

Pull arm64 fixes from Catalin Marinas:
 "Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
  MediaTek firmware:

   - Move the MediaTek GIC quirk handling from irqchip to core. Before
     the merging window commit 44bd78dd ("irqchip/gic-v3: Disable
     pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
     addressed this issue. Fixed now at a deeper level in the arch code

   - Reject events meant for other PMUs in the CoreSight PMU driver,
     otherwise some of the core PMU events would disappear

   - Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
     causing some events to be invisible

   - Remove duplicate declaration of __arm64_sys##name following the
     patch to avoid prototype warning for syscalls

   - Typos in the elf_hwcap documentation"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/syscall: Remove duplicate declaration
  Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
  arm64: Move MediaTek GIC quirk handling from irqchip to core
  arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
  perf: arm_cspmu: Reject events meant for other PMUs
  Documentation/arm64: Fix typos in elf_hwcaps