- 14 May, 2019 40 commits
-
-
Steve French authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 85f9987b ] It was mapped to EIO which can be confusing when user space queries for an object GUID for an object for which the server file system doesn't support (or hasn't saved one). As Amir Goldstein suggested this is similar to ENOATTR (equivalently ENODATA in Linux errno definitions) so changing NT STATUS code mapping for OBJECTID_NOT_FOUND to ENODATA. Signed-off-by:
Steve French <stfrench@microsoft.com> CC: Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com>
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit e898e69d ] When building with -Wsometimes-uninitialized, Clang warns: arch/x86/kernel/hw_breakpoint.c:355:2: warning: variable 'align' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] The default cannot be reached because arch_build_bp_info() initializes hw->len to one of the specified cases. Nevertheless the warning is valid and returning -EINVAL makes sure that this cannot be broken by future modifications. Suggested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
-
Lu Baolu authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 5bb71fc7 ] The spec states in 10.4.16 that the Protected Memory Enable Register should be treated as read-only for implementations not supporting protected memory regions (PLMR and PHMR fields reported as Clear in the Capability register). Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: mark gross <mgross@intel.com> Suggested-by:
Ashok Raj <ashok.raj@intel.com> Fixes: f8bab735 ("intel-iommu: PMEN support") Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Matthew Whitehead authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 18fb053f ] There are comments in processor-cyrix.h advising you to _not_ make calls using the deprecated macros in this style: setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80); This is because it expands the macro into a non-functioning calling sequence. The calling order must be: outb(CX86_CCR2, 0x22); inb(0x23); From the comments: * When using the old macros a line like * setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88); * gets expanded to: * do { * outb((CX86_CCR2), 0x22); * outb((({ * outb((CX86_CCR2), 0x22); * inb(0x23); * }) | 0x88), 0x23); * } while (0); The new macros fix this problem, so use them instead. Tested on an actual Geode processor. Signed-off-by:
Matthew Whitehead <tedheadster@gmail.com> Signed-off-by:
-
Aditya Pakki authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 2e84f116 ] hpet_virt_address may be NULL when ioremap_nocache fail, but the code lacks a check. Add a check to prevent NULL pointer dereference. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
-
Changbin Du authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit d982b331 ] ================================================================= ==20875==ERROR: LeakSanitizer: detected memory leaks Direct leak of 1160 byte(s) in 1 object(s) allocated from: #0 0x7f1b6fc84138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x55bd50005599 in zalloc util/util.h:23 #2 0x55bd500068f5 in perf_evsel__newtp_idx util/evsel.c:327 #3 0x55bd4ff810fc in perf_evsel__newtp /home/work/linux/tools/perf/util/evsel.h:216 #4 0x55bd4ff81608 in test__perf_evsel__tp_sched_test tests/evsel-tp-sched.c:69 #5 0x55bd4ff528e6 in run_test tests/builtin-test.c:358 #6 0x55bd4ff52baf in test_and_print tests/builtin-test.c:388 #7 0x55bd4ff543fe in __cmd_test tests/builtin-test.c:583 #8 0x55bd4ff5572f in cmd_test tests/builtin-test.c:722 #9 0x55bd4ffc4087 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #10 0x55bd4ffc45c6 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #11 0x55bd4ffc49ca in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #12 0x55bd4ffc5138 in main /home/changbin/work/linux/tools/perf/perf.c:520 #13 0x7f1b6e34809a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Indirect leak of 19 byte(s) in 1 object(s) allocated from: #0 0x7f1b6fc83f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30) #1 0x7f1b6e3ac30f in vasprintf (/lib/x86_64-linux-gnu/libc.so.6+0x8830f) Signed-off-by:
Changbin Du <changbin.du@gmail.com> Reviewed-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Fixes: 6a6cd11d ("perf test: Add test for the sched tracepoint format fields") Link: http://lkml.kernel.org/r/20190316080556.3075-17-changbin.du@gmail.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Changbin Du authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 93faa52e ] ================================================================= ==7497==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f0333a88f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30) #1 0x5625e5326213 in cpu_map__trim_new util/cpumap.c:45 #2 0x5625e5326703 in cpu_map__read util/cpumap.c:103 #3 0x5625e53267ef in cpu_map__read_all_cpu_map util/cpumap.c:120 #4 0x5625e5326915 in cpu_map__new util/cpumap.c:135 #5 0x5625e517b355 in test__openat_syscall_event_on_all_cpus tests/openat-syscall-all-cpus.c:36 #6 0x5625e51528e6 in run_test tests/builtin-test.c:358 #7 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #8 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #9 0x5625e515572f in cmd_test tests/builtin-test.c:722 #10 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #11 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #12 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #13 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #14 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by:
-
Arnaldo Carvalho de Melo authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 42dfa451 ] Using gcc's ASan, Changbin reports: ================================================================= ==7494==ERROR: LeakSanitizer: detected memory leaks Direct leak of 48 byte(s) in 1 object(s) allocated from: #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5625e5330a5e in zalloc util/util.h:23 #2 0x5625e5330a9b in perf_counts__new util/counts.c:10 #3 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47 #4 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505 #5 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347 #6 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47 #7 0x5625e51528e6 in run_test tests/builtin-test.c:358 #8 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #9 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #10 0x5625e515572f in cmd_test tests/builtin-test.c:722 #11 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #12 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #13 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #14 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #15 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Indirect leak of 72 byte(s) in 1 object(s) allocated from: #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5625e532560d in zalloc util/util.h:23 #2 0x5625e532566b in xyarray__new util/xyarray.c:10 #3 0x5625e5330aba in perf_counts__new util/counts.c:15 #4 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47 #5 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505 #6 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347 #7 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47 #8 0x5625e51528e6 in run_test tests/builtin-test.c:358 #9 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #10 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #11 0x5625e515572f in cmd_test tests/builtin-test.c:722 #12 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #13 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #14 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #15 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #16 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) His patch took care of evsel->prev_raw_counts, but the above backtraces are about evsel->counts, so fix that instead. Reported-by:
-
Changbin Du authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 70c819e4 ] We should go to the cleanup path, to avoid leaks, detected using gcc's ASan. Signed-off-by:
-
David Arcari authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 2a954966 ] turbostat failed to return a non-zero exit status even though the supplied command (turbostat <command>) failed. Currently when turbostat forks a command it returns zero instead of the actual exit status of the command. Modify the code to return the exit status. Signed-off-by:
David Arcari <darcari@redhat.com> Acked-by:
Len Brown <len.brown@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Matthew Garrett authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 396ee4d0 ] int3400 only pushes the UUID into the firmware when the mode is flipped to "enable". The current code only exposes the mode flag if the firmware supports the PASSIVE_1 UUID, which not all machines do. Remove the restriction. Signed-off-by:
Matthew Garrett <mjg59@google.com> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Matthew Garrett authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 16fc8eca ] Add more supported DPTF policies than the driver currently exposes. Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit b4748e7a ] The function snd_opl3_drum_switch declaration in the header file has the order of the two arguments on_off and vel swapped when compared to the definition arguments of vel and on_off. Fix this by swapping them around to match the definition. This error predates the git history, so no idea when this error was introduced. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 9ce58dd7 ] Building with clang finds a mistaken __init tag: WARNING: vmlinux.o(.text+0x5e4250): Section mismatch in reference from the function davinci_mmcsd_probe() to the function .init.text:init_mmcsd_host() The function davinci_mmcsd_probe() references the function __init init_mmcsd_host(). This is often because davinci_mmcsd_probe lacks a __init annotation or the annotation of init_mmcsd_host is wrong. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Wolfram Sang <wsa@the-dreams.de> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Jack Morgenstein authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 587443e7 ] Code review revealed a race condition which could allow the catas error flow to interrupt the alias guid query post mechanism at random points. Thiis is fixed by doing cancel_delayed_work_sync() instead of cancel_delayed_work() during the alias guid mechanism destroy flow. Fixes: a0c64a17 ("mlx4: Add alias_guid mechanism") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Kangjie Lu authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit dcd0feac ] In case request_region fails, the fix returns an error code to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
Kangjie Lu authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 6ade657d ] In case ioremap_nocache fails, the fix releases chip and returns an error code upstream to avoid NULL pointer dereference. Signed-off-by:
-
Lukas Czerner authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 6c732840 ] Currently when the file system resize using ext4_resize_fs() fails it will report into log that "resized filesystem to <requested block count>". However this may not be true in the case of failure. Use the current block count as returned by ext4_blocks_count() to report the block count. Additionally, report a warning that "error occurred during file system resize" Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Lukas Czerner authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit d64264d6 ] Currently in add_new_gdb_meta_bg() there is a missing brelse of gdb_bh in case ext4_journal_get_write_access() fails. Additionally kvfree() is missing in the same error path. Fix it by moving the ext4_journal_get_write_access() before the ext4 sb update as Ted suggested and release n_group_desc and gdb_bh in case it fails. Fixes: 61a9c11e ("ext4: add missing brelse() add_new_gdb_meta_bg()'s error path") Signed-off-by:
-
Stephane Eranian authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit d9c1bb2f ] On mmap(), perf_events generates a RECORD_MMAP record and then checks which events are interested in this record. There are currently 2 versions of mmap records: RECORD_MMAP and RECORD_MMAP2. MMAP2 is larger. The event configuration controls which version the user level tool accepts. If the event->attr.mmap2=1 field then MMAP2 record is returned. The perf_event_mmap_output() takes care of this. It checks attr->mmap2 and corrects the record fields before putting it in the sampling buffer of the event. At the end the function restores the modified MMAP record fields. The problem is that the function restores the size but not the type. Thus, if a subsequent event only accepts MMAP type, then it would instead receive an MMAP2 record with a size of MMAP record. This patch fixes the problem by restoring the record type on exit. Signed-off-by:
Stephane Eranian <eranian@google.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Fixes: 13d7a241 ("perf: Add attr->mmap2 attribute to an event") Link: http://lkml.kernel.org/r/20190307185233.225521-1-eranian@google.comSigned-off-by:
-
Andre Przywara authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 9cde402a upstream. There is a Marvell 88SE9170 PCIe SATA controller I found on a board here. Some quick testing with the ARM SMMU enabled reveals that it suffers from the same requester ID mixup problems as the other Marvell chips listed already. Add the PCI vendor/device ID to the list of chips which need the workaround. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Max Filippov authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit ada770b1 upstream. return_address returns the address that is one level higher in the call stack than requested in its argument, because level 0 corresponds to its caller's return address. Use requested level as the number of stack frames to skip. This fixes the address reported by might_sleep and friends. Cc: stable@vger.kernel.org Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Mel Gorman authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 0e9f0245 upstream. A NULL pointer dereference bug was reported on a distribution kernel but the same issue should be present on mainline kernel. It occured on s390 but should not be arch-specific. A partial oops looks like: Unable to handle kernel pointer dereference in virtual kernel address space ... Call Trace: ... try_to_wake_up+0xfc/0x450 vhost_poll_wakeup+0x3a/0x50 [vhost] __wake_up_common+0xbc/0x178 __wake_up_common_lock+0x9e/0x160 __wake_up_sync_key+0x4e/0x60 sock_def_readable+0x5e/0x98 The bug hits any time between 1 hour to 3 days. The dereference occurs in update_cfs_rq_h_load when accumulating h_load. The problem is that cfq_rq->h_load_next is not protected by any locking and can be updated by parallel calls to task_h_load. Depending on the compiler, code may be generated that re-reads cfq_rq->h_load_next after the check for NULL and then oops when reading se->avg.load_avg. The dissassembly showed that it was possible to reread h_load_next after the check for NULL. While this does not appear to be an issue for later compilers, it's still an accident if the correct code is generated. Full locking in this path would have high overhead so this patch uses READ_ONCE to read h_load_next only once and check for NULL before dereferencing. It was confirmed that there were no further oops after 10 days of testing. As Peter pointed out, it is also necessary to use WRITE_ONCE() to avoid any potential problems with store tearing. Signed-off-by:
Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
Valentin Schneider <valentin.schneider@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Fixes: 68520796 ("sched: Move h_load calculation to task_h_load()") Link: https://lkml.kernel.org/r/20190319123610.nsivgf3mjbjjesxb@techsingularity.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 42d8644b upstream. The "call" variable comes from the user in privcmd_ioctl_hypercall(). It's an offset into the hypercall_page[] which has (PAGE_SIZE / 32) elements. We need to put an upper bound on it to prevent an out of bounds access. Cc: stable@vger.kernel.org Fixes: 1246ae0b ("xen: add variable hypercall caller") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Will Deacon authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 045afc24 upstream. Rather embarrassingly, our futex() FUTEX_WAKE_OP implementation doesn't explicitly set the return value on the non-faulting path and instead leaves it holding the result of the underlying atomic operation. This means that any FUTEX_WAKE_OP atomic operation which computes a non-zero value will be reported as having failed. Regrettably, I wrote the buggy code back in 2011 and it was upstreamed as part of the initial arm64 support in 2012. The reasons we appear to get away with this are: 1. FUTEX_WAKE_OP is rarely used and therefore doesn't appear to get exercised by futex() test applications 2. If the result of the atomic operation is zero, the system call behaves correctly 3. Prior to version 2.25, the only operation used by GLIBC set the futex to zero, and therefore worked as expected. From 2.25 onwards, FUTEX_WAKE_OP is not used by GLIBC at all. Fix the implementation by ensuring that the return value is either 0 to indicate that the atomic operation completed successfully, or -EFAULT if we encountered a fault when accessing the user mapping. Cc: <stable@kernel.org> Fixes: 6170a974 ("arm64: Atomic operations") Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
David Engraf authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit e7dfb6d0 upstream. The function argument for the ISC_D0 on PC9 was incorrect. According to the documentation it should be 'C' aka 3. Signed-off-by:
David Engraf <david.engraf@sysgo.com> Reviewed-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Fixes: 7f16cb67 ("ARM: at91/dt: add sama5d2 pinmux") Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
-
Stephen Boyd authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 325aa195 upstream. If a child irqchip calls irq_chip_set_wake_parent() but its parent irqchip has the IRQCHIP_SKIP_SET_WAKE flag set an error is returned. This is inconsistent behaviour vs. set_irq_wake_real() which returns 0 when the irqchip has the IRQCHIP_SKIP_SET_WAKE flag set. It doesn't attempt to walk the chain of parents and set irq wake on any chips that don't have the flag set either. If the intent is to call the .irq_set_wake() callback of the parent irqchip, then we expect irqchip implementations to omit the IRQCHIP_SKIP_SET_WAKE flag and implement an .irq_set_wake() function that calls irq_chip_set_wake_parent(). The problem has been observed on a Qualcomm sdm845 device where set wake fails on any GPIO interrupts after applying work in progress wakeup irq patches to the GPIO driver. The chain of chips looks like this: QCOM GPIO -> QCOM PDC (SKIP) -> ARM GIC (SKIP) The GPIO controllers parent is the QCOM PDC irqchip which in turn has ARM GIC as parent. The QCOM PDC irqchip has the IRQCHIP_SKIP_SET_WAKE flag set, and so does the grandparent ARM GIC. The GPIO driver doesn't know if the parent needs to set wake or not, so it unconditionally calls irq_chip_set_wake_parent() causing this function to return a failure because the parent irqchip (PDC) doesn't have the .irq_set_wake() callback set. Returning 0 instead makes everything work and irqs from the GPIO controller can be configured for wakeup. Make it consistent by returning 0 (success) from irq_chip_set_wake_parent() when a parent chip has IRQCHIP_SKIP_SET_WAKE set. [ tglx: Massaged changelog ] Fixes: 08b55e2a ("genirq: Add irqchip_set_wake_parent") Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: Lina Iyer <ilina@codeaurora.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190325181026.247796-1-swboyd@chromium.orgSigned-off-by:
-
Jérôme Glisse authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit a3761c3c upstream. When bio_add_pc_page() fails in bio_copy_user_iov() we should free the page we just allocated otherwise we are leaking it. Cc: linux-block@vger.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
Jérôme Glisse <jglisse@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
S.j. Wang authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 0ff4e8c6 upstream. There is very low possibility ( < 0.1% ) that channel swap happened in beginning when multi output/input pin is enabled. The issue is that hardware can't send data to correct pin in the beginning with the normal enable flow. This is hardware issue, but there is no errata, the workaround flow is that: Each time playback/recording, firstly clear the xSMA/xSMB, then enable TE/RE, then enable xSMB and xSMA (xSMB must be enabled before xSMA). Which is to use the xSMA as the trigger start register, previously the xCR_TE or xCR_RE is the bit for starting. Fixes commit 43d24e76 ("ASoC: fsl_esai: Add ESAI CPU DAI driver") Cc: <stable@vger.kernel.org> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 6147e136 upstream. clang points out with hundreds of warnings that the bitrev macros have a problem with constant input: drivers/hwmon/sht15.c:187:11: error: variable '__x' is uninitialized when used within its own initialization [-Werror,-Wuninitialized] u8 crc = bitrev8(data->val_status & 0x0F); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/bitrev.h:102:21: note: expanded from macro 'bitrev8' __constant_bitrev8(__x) : \ ~~~~~~~~~~~~~~~~~~~^~~~ include/linux/bitrev.h:67:11: note: expanded from macro '__constant_bitrev8' u8 __x = x; \ ~~~ ^ Both the bitrev and the __constant_bitrev macros use an internal variable named __x, which goes horribly wrong when passing one to the other. The obvious fix is to rename one of the variables, so this adds an extra '_'. It seems we got away with this because - there are only a few drivers using bitrev macros - usually there are no constant arguments to those - when they are constant, they tend to be either 0 or (unsigned)-1 (drivers/isdn/i4l/isdnhdlc.o, drivers/iio/amplifiers/ad8366.c) and give the correct result by pure chance. In fact, the only driver that I could find that gets different results with this is drivers/net/wan/slic_ds26522.c, which in turn is a driver for fairly rare hardware (adding the maintainer to Cc for testing). Link: http://lkml.kernel.org/r/20190322140503.123580-1-arnd@arndb.de Fixes: 556d2f05 ("ARM: 8187/1: add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction") Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Zubin Mithra authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 212ac181 upstream. When ioctl calls are made with non-null-terminated userspace strings, strlcpy causes an OOB-read from within strlen. Fix by changing to use strscpy instead. Signed-off-by:
Zubin Mithra <zsm@chromium.org> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Sheena Mira-ato authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit b2e54b09 ] The device type for ip6 tunnels is set to ARPHRD_TUNNEL6. However, the ip4ip6_err function is expecting the device type of the tunnel to be ARPHRD_TUNNEL. Since the device types do not match, the function exits and the ICMP error packet is not sent to the originating host. Note that the device type for IPv4 tunnels is set to ARPHRD_TUNNEL. Fix is to expect a tunnel device type of ARPHRD_TUNNEL6 instead. Now the tunnel device type matches and the ICMP error packet is sent to the originating host. Signed-off-by:
Sheena Mira-ato <sheena.mira-ato@alliedtelesis.co.nz> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Li RongQing authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 3d883026 ] NULL or ZERO_SIZE_PTR will be returned for zero sized memory request, and derefencing them will lead to a segfault so it is unnecessory to call vzalloc for zero sized memory request and not call functions which maybe derefence the NULL allocated memory this also fixes a possible memory leak if phy_ethtool_get_stats returns error, memory should be freed before exit Signed-off-by:
Li RongQing <lirongqing@baidu.com> Reviewed-by:
Wang Li <wangli39@baidu.com> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 355b9855 ] net_hash_mix() currently uses kernel address of a struct net, and is used in many places that could be used to reveal this address to a patient attacker, thus defeating KASLR, for the typical case (initial net namespace, &init_net is not dynamically allocated) I believe the original implementation tried to avoid spending too many cycles in this function, but security comes first. Also provide entropy regardless of CONFIG_NET_NS. Fixes: 0b441916 ("netns: introduce the net_hash_mix "salt" for hashes") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Amit Klein <aksecurity@gmail.com> Reported-by:
Benny Pinkas <benny@pinkas.net> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by:
-
Koen De Schepper authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit aecfde23 ] RFC8257 §3.5 explicitly states that "A DCTCP sender MUST react to loss episodes in the same way as conventional TCP". Currently, Linux DCTCP performs no cwnd reduction when losses are encountered. Optionally, the dctcp_clamp_alpha_on_loss resets alpha to its maximal value if a RTO happens. This behavior is sub-optimal for at least two reasons: i) it ignores losses triggering fast retransmissions; and ii) it causes unnecessary large cwnd reduction in the future if the loss was isolated as it resets the historical term of DCTCP's alpha EWMA to its maximal value (i.e., denoting a total congestion). The second reason has an especially noticeable effect when using DCTCP in high BDP environments, where alpha normally stays at low values. This patch replace the clamping of alpha by setting ssthresh to half of cwnd for both fast retransmissions and RTOs, at most once per RTT. Consequently, the dctcp_clamp_alpha_on_loss module parameter has been removed. The table below shows experimental results where we measured the drop probability of a PIE AQM (not applying ECN marks) at a bottleneck in the presence of a single TCP flow with either the alpha-clamping option enabled or the cwnd halving proposed by this patch. Results using reno or cubic are given for comparison. | Link | RTT | Drop TCP CC | speed | base+AQM | probability ==================|=========|==========|============ CUBIC | 40Mbps | 7+20ms | 0.21% RENO | | | 0.19% DCTCP-CLAMP-ALPHA | | | 25.80% DCTCP-HALVE-CWND | | | 0.22% ------------------|---------|----------|------------ CUBIC | 100Mbps | 7+20ms | 0.03% RENO | | | 0.02% DCTCP-CLAMP-ALPHA | | | 23.30% DCTCP-HALVE-CWND | | | 0.04% ------------------|---------|----------|------------ CUBIC | 800Mbps | 1+1ms | 0.04% RENO | | | 0.05% DCTCP-CLAMP-ALPHA | | | 18.70% DCTCP-HALVE-CWND | | | 0.06% We see that, without halving its cwnd for all source of losses, DCTCP drives the AQM to large drop probabilities in order to keep the queue length under control (i.e., it repeatedly faces RTOs). Instead, if DCTCP reacts to all source of losses, it can then be controlled by the AQM using similar drop levels than cubic or reno. Signed-off-by:
Koen De Schepper <koen.de_schepper@nokia-bell-labs.com> Signed-off-by:
Olivier Tilmans <olivier.tilmans@nokia-bell-labs.com> Cc: Bob Briscoe <research@bobbriscoe.net> Cc: Lawrence Brakmo <brakmo@fb.com> Cc: Florian Westphal <fw@strlen.de> Cc: Daniel Borkmann <borkmann@iogearbox.net> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Andrew Shewmaker <agshew@gmail.com> Cc: Glenn Judd <glenn.judd@morganstanley.com> Acked-by:
Florian Westphal <fw@strlen.de> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 09279e61 ] Syzbot report a kernel-infoleak: BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 Call Trace: _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 copy_to_user include/linux/uaccess.h:174 [inline] sctp_getsockopt_peer_addrs net/sctp/socket.c:5911 [inline] sctp_getsockopt+0x1668e/0x17f70 net/sctp/socket.c:7562 ... Uninit was stored to memory at: sctp_transport_init net/sctp/transport.c:61 [inline] sctp_transport_new+0x16d/0x9a0 net/sctp/transport.c:115 sctp_assoc_add_peer+0x532/0x1f70 net/sctp/associola.c:637 sctp_process_param net/sctp/sm_make_chunk.c:2548 [inline] sctp_process_init+0x1a1b/0x3ed0 net/sctp/sm_make_chunk.c:2361 ... Bytes 8-15 of 16 are uninitialized It was caused by that th _pad field (the 8-15 bytes) of a v4 addr (saved in struct sockaddr_in) wasn't initialized, but directly copied to user memory in sctp_getsockopt_peer_addrs(). So fix it by calling memset(addr->v4.sin_zero, 0, 8) to initialize _pad of sockaddr_in before copying it to user memory in sctp_v4_addr_to_user(), as sctp_v6_addr_to_user() does. Reported-by: syzbot+86b5c7c236a22616a72f@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Tested-by:
Alexander Potapenko <glider@google.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Bjørn Mork authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 6289d0fa ] This is a Qualcomm based device with a QMI function on interface 4. It is mode switched from 2020:2030 using a standard eject message. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2031 Rev= 2.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Mao Wenan authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit cb66ddd1 ] When it is to cleanup net namespace, rds_tcp_exit_net() will call rds_tcp_kill_sock(), if t_sock is NULL, it will not call rds_conn_destroy(), rds_conn_path_destroy() and rds_tcp_conn_free() to free connection, and the worker cp_conn_w is not stopped, afterwards the net is freed in net_drop_ns(); While cp_conn_w rds_connect_worker() will call rds_tcp_conn_path_connect() and reference 'net' which has already been freed. In rds_tcp_conn_path_connect(), rds_tcp_set_callbacks() will set t_sock = sock before sock->ops->connect, but if connect() is failed, it will call rds_tcp_restore_callbacks() and set t_sock = NULL, if connect is always failed, rds_connect_worker() will try to reconnect all the time, so rds_tcp_kill_sock() will never to cancel worker cp_conn_w and free the connections. Therefore, the condition !tc->t_sock is not needed if it is going to do cleanup_net->rds_tcp_exit_net->rds_tcp_kill_sock, because tc->t_sock is always NULL, and there is on other path to cancel cp_conn_w and free connection. So this patch is to fix this. rds_tcp_kill_sock(): ... if (net != c_net || !tc->t_sock) ... Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> ================================================================== BUG: KASAN: use-after-free in inet_create+0xbcc/0xd28 net/ipv4/af_inet.c:340 Read of size 4 at addr ffff8003496a4684 by task kworker/u8:4/3721 CPU: 3 PID: 3721 Comm: kworker/u8:4 Not tainted 5.1.0 #11 Hardware name: linux,dummy-virt (DT) Workqueue: krdsd rds_connect_worker Call trace: dump_backtrace+0x0/0x3c0 arch/arm64/kernel/time.c:53 show_stack+0x28/0x38 arch/arm64/kernel/traps.c:152 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x120/0x188 lib/dump_stack.c:113 print_address_description+0x68/0x278 mm/kasan/report.c:253 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x21c/0x348 mm/kasan/report.c:409 __asan_report_load4_noabort+0x30/0x40 mm/kasan/report.c:429 inet_create+0xbcc/0xd28 net/ipv4/af_inet.c:340 __sock_create+0x4f8/0x770 net/socket.c:1276 sock_create_kern+0x50/0x68 net/socket.c:1322 rds_tcp_conn_path_connect+0x2b4/0x690 net/rds/tcp_connect.c:114 rds_connect_worker+0x108/0x1d0 net/rds/threads.c:175 process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153 worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296 kthread+0x2f0/0x378 kernel/kthread.c:255 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117 Allocated by task 687: save_stack mm/kasan/kasan.c:448 [inline] set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xd4/0x180 mm/kasan/kasan.c:553 kasan_slab_alloc+0x14/0x20 mm/kasan/kasan.c:490 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2705 [inline] slab_alloc mm/slub.c:2713 [inline] kmem_cache_alloc+0x14c/0x388 mm/slub.c:2718 kmem_cache_zalloc include/linux/slab.h:697 [inline] net_alloc net/core/net_namespace.c:384 [inline] copy_net_ns+0xc4/0x2d0 net/core/net_namespace.c:424 create_new_namespaces+0x300/0x658 kernel/nsproxy.c:107 unshare_nsproxy_namespaces+0xa0/0x198 kernel/nsproxy.c:206 ksys_unshare+0x340/0x628 kernel/fork.c:2577 __do_sys_unshare kernel/fork.c:2645 [inline] __se_sys_unshare kernel/fork.c:2643 [inline] __arm64_sys_unshare+0x38/0x58 kernel/fork.c:2643 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall arch/arm64/kernel/syscall.c:47 [inline] el0_svc_common+0x168/0x390 arch/arm64/kernel/syscall.c:83 el0_svc_handler+0x60/0xd0 arch/arm64/kernel/syscall.c:129 el0_svc+0x8/0xc arch/arm64/kernel/entry.S:960 Freed by task 264: save_stack mm/kasan/kasan.c:448 [inline] set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x114/0x220 mm/kasan/kasan.c:521 kasan_slab_free+0x10/0x18 mm/kasan/kasan.c:528 slab_free_hook mm/slub.c:1370 [inline] slab_free_freelist_hook mm/slub.c:1397 [inline] slab_free mm/slub.c:2952 [inline] kmem_cache_free+0xb8/0x3a8 mm/slub.c:2968 net_free net/core/net_namespace.c:400 [inline] net_drop_ns.part.6+0x78/0x90 net/core/net_namespace.c:407 net_drop_ns net/core/net_namespace.c:406 [inline] cleanup_net+0x53c/0x6d8 net/core/net_namespace.c:569 process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153 worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296 kthread+0x2f0/0x378 kernel/kthread.c:255 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117 The buggy address belongs to the object at ffff8003496a3f80 which belongs to the cache net_namespace of size 7872 The buggy address is located 1796 bytes inside of 7872-byte region [ffff8003496a3f80, ffff8003496a5e40) The buggy address belongs to the page: page:ffff7e000d25a800 count:1 mapcount:0 mapping:ffff80036ce4b000 index:0x0 compound_mapcount: 0 flags: 0xffffe0000008100(slab|head) raw: 0ffffe0000008100 dead000000000100 dead000000000200 ffff80036ce4b000 raw: 0000000000000000 0000000080040004 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8003496a4580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8003496a4600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8003496a4680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8003496a4700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8003496a4780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 467fa153("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
-
Lorenzo Bianconi authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit bb9bd814 ] ipip6 tunnels run iptunnel_pull_header on received skbs. This can determine the following use-after-free accessing iph pointer since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device) [ 706.369655] BUG: KASAN: use-after-free in ipip6_rcv+0x1678/0x16e0 [sit] [ 706.449056] Read of size 1 at addr ffffe01b6bd855f5 by task ksoftirqd/1/= [ 706.669494] Hardware name: HPE ProLiant m400 Server/ProLiant m400 Server, BIOS U02 08/19/2016 [ 706.771839] Call trace: [ 706.801159] dump_backtrace+0x0/0x2f8 [ 706.845079] show_stack+0x24/0x30 [ 706.884833] dump_stack+0xe0/0x11c [ 706.925629] print_address_description+0x68/0x260 [ 706.982070] kasan_report+0x178/0x340 [ 707.025995] __asan_report_load1_noabort+0x30/0x40 [ 707.083481] ipip6_rcv+0x1678/0x16e0 [sit] [ 707.132623] tunnel64_rcv+0xd4/0x200 [tunnel4] [ 707.185940] ip_local_deliver_finish+0x3b8/0x988 [ 707.241338] ip_local_deliver+0x144/0x470 [ 707.289436] ip_rcv_finish+0x43c/0x14b0 [ 707.335447] ip_rcv+0x628/0x1138 [ 707.374151] __netif_receive_skb_core+0x1670/0x2600 [ 707.432680] __netif_receive_skb+0x28/0x190 [ 707.482859] process_backlog+0x1d0/0x610 [ 707.529913] net_rx_action+0x37c/0xf68 [ 707.574882] __do_softirq+0x288/0x1018 [ 707.619852] run_ksoftirqd+0x70/0xa8 [ 707.662734] smpboot_thread_fn+0x3a4/0x9e8 [ 707.711875] kthread+0x2c8/0x350 [ 707.750583] ret_from_fork+0x10/0x18 [ 707.811302] Allocated by task 16982: [ 707.854182] kasan_kmalloc.part.1+0x40/0x108 [ 707.905405] kasan_kmalloc+0xb4/0xc8 [ 707.948291] kasan_slab_alloc+0x14/0x20 [ 707.994309] __kmalloc_node_track_caller+0x158/0x5e0 [ 708.053902] __kmalloc_reserve.isra.8+0x54/0xe0 [ 708.108280] __alloc_skb+0xd8/0x400 [ 708.150139] sk_stream_alloc_skb+0xa4/0x638 [ 708.200346] tcp_sendmsg_locked+0x818/0x2b90 [ 708.251581] tcp_sendmsg+0x40/0x60 [ 708.292376] inet_sendmsg+0xf0/0x520 [ 708.335259] sock_sendmsg+0xac/0xf8 [ 708.377096] sock_write_iter+0x1c0/0x2c0 [ 708.424154] new_sync_write+0x358/0x4a8 [ 708.470162] __vfs_write+0xc4/0xf8 [ 708.510950] vfs_write+0x12c/0x3d0 [ 708.551739] ksys_write+0xcc/0x178 [ 708.592533] __arm64_sys_write+0x70/0xa0 [ 708.639593] el0_svc_handler+0x13c/0x298 [ 708.686646] el0_svc+0x8/0xc [ 708.739019] Freed by task 17: [ 708.774597] __kasan_slab_free+0x114/0x228 [ 708.823736] kasan_slab_free+0x10/0x18 [ 708.868703] kfree+0x100/0x3d8 [ 708.905320] skb_free_head+0x7c/0x98 [ 708.948204] skb_release_data+0x320/0x490 [ 708.996301] pskb_expand_head+0x60c/0x970 [ 709.044399] __iptunnel_pull_header+0x3b8/0x5d0 [ 709.098770] ipip6_rcv+0x41c/0x16e0 [sit] [ 709.146873] tunnel64_rcv+0xd4/0x200 [tunnel4] [ 709.200195] ip_local_deliver_finish+0x3b8/0x988 [ 709.255596] ip_local_deliver+0x144/0x470 [ 709.303692] ip_rcv_finish+0x43c/0x14b0 [ 709.349705] ip_rcv+0x628/0x1138 [ 709.388413] __netif_receive_skb_core+0x1670/0x2600 [ 709.446943] __netif_receive_skb+0x28/0x190 [ 709.497120] process_backlog+0x1d0/0x610 [ 709.544169] net_rx_action+0x37c/0xf68 [ 709.589131] __do_softirq+0x288/0x1018 [ 709.651938] The buggy address belongs to the object at ffffe01b6bd85580 which belongs to the cache kmalloc-1024 of size 1024 [ 709.804356] The buggy address is located 117 bytes inside of 1024-byte region [ffffe01b6bd85580, ffffe01b6bd85980) [ 709.946340] The buggy address belongs to the page: [ 710.003824] page:ffff7ff806daf600 count:1 mapcount:0 mapping:ffffe01c4001f600 index:0x0 [ 710.099914] flags: 0xfffff8000000100(slab) [ 710.149059] raw: 0fffff8000000100 dead000000000100 dead000000000200 ffffe01c4001f600 [ 710.242011] raw: 0000000000000000 0000000000380038 00000001ffffffff 0000000000000000 [ 710.334966] page dumped because: kasan: bad access detected Fix it resetting iph pointer after iptunnel_pull_header Fixes: a09a4c8d ("tunnels: Remove encapsulation offloads on decap") Tested-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Junwei Hu authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit ef0efcd3 ] At the beginning of ip6_fragment func, the prevhdr pointer is obtained in the ip6_find_1stfragopt func. However, all the pointers pointing into skb header may change when calling skb_checksum_help func with skb->ip_summed = CHECKSUM_PARTIAL condition. The prevhdr pointe will be dangling if it is not reloaded after calling __skb_linearize func in skb_checksum_help func. Here, I add a variable, nexthdr_offset, to evaluate the offset, which does not changes even after calling __skb_linearize func. Fixes: 405c92f7 ("ipv6: add defensive check for CHECKSUM_PARTIAL skbs in ip_fragment") Signed-off-by:
Junwei Hu <hujunwei4@huawei.com> Reported-by:
Wenhao Zhang <zhangwenhao8@huawei.com> Reported-by: syzbot+e8ce541d095e486074fc@syzkaller.appspotmail.com Reviewed-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
