qeth_l2_request_initial_mac() queries the device for its supported
adapterparms, even though they already have been queried as part of the
device's high-level setup. Remove that extra call.

The only call chain for qeth_l2_request_initial_mac() is
__qeth_l2_set_online()
	qeth_core_hardsetup_card()
		qeth_query_setadapterparms()
	qeth_l2_setup_netdev()
		qeth_l2_request_initial_mac()
			qeth_query_setadapterparms()

, and we only reach qeth_l2_request_initial_mac() if the first
adapterparms query succeeds. Hence removing the second query results in
no loss of functionality.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After transmitting a skb via send_packet[_fast](), the statistics
code accesses the skb once more to account for transmitted page frags.
This has a (theoretical?) race against the TX completion - if the TX
completion is processed and frees the skb before hard_start_xmit()
gets to the statistics part, we access random memory.

Fix this by caching the # of page frags, before the skb is transmitted.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fw_type module parameter isn't showing up in the
/sys/module/liquidio/parameters directory.  Fix it by setting the read
permission bits for user, group, other in module_param_string().  Revise
the description of fw_type.  Initialize the fw_type static char array with
the default value to conform to the module parameter description.
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: Add support for nexthop group consolidation for IPv6

Arkadi says:

Due to limited ASIC resources the maximum number of routes is limited by
the nexthop resource. In order to improve the routing scale nexthop
consolidation should be performed.

In case of IPv4, the kernel does the consolidation of nexthops in the form
of the fib_info struct. In that case, the driver uses the fib_info's
address as a key for the internal nexthop group representative struct
lookup. In case of IPv6, the kernel doesn't do consolidation, thus the
driver should implement it by itself.

The hash value is calculated based on the nexthop set, by performing
bitwise xor on the ifindexs of the nexthops, in a similar way to IPV4's
kernel implementation. In case of collision a full match is performed
between the sets which include address and ifindex comparison.

In order to use the same hash table in both cases (IPv4/6), the rhashtable
is changed to operate on variable length key.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Due to limited ASIC resources the maximum number of routes is limited by
the nexthop resource. In order to improve the routing scale nexthop
consolidation should be performed.

This patch adds support for IPv6 neighbor consolidation. The hash value
is calculated based on the nexthop set, by performing bitwise xor on the
ifindexs of the nexthops, in a similar way to IPv4's kernel implementation.
In case of collision a full match is performed between the sets which
include address and ifindex comparison.

Non gateway nexthop groups are not inserted to the hash table due to
lack of nexthop device (ifindex).
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch does preparation before introducing IPv6 nexthop group
consolidation. Currently the nexthop group hash table is used only by
IPv4 and uses fixed key size. In order to support the IPv6's variable
length key the current table is changed.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Intiyaz Basha says:

====================
liquidio: adding support for ethtool --set-ring feature

Code reorganization is required for adding ethtool --set-ring feature.
First seven patches are for code reorganization.  The last patch is for
adding this feature.

Change Log:
V1 -> V2
 Only patch #8 was changed:  unnecessary parentheses were removed in two
 if-statements in lio_ethtool_set_ringparam().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

added support for ethtool --set-ring feature
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Moving common liquidio_setup_io_queues to lio_core.c
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Moving common liquidio_napi_poll to lio_core.c
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Moving common liquidio_napi_drv_callback to lio_core.c
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Moving common liquidio_push_packet to lio_core.c
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Moving common octeon_setup_droq to lio_core.c
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Moving common update_txq_status to lio_core.c
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Moving common function wait_for_pending_requests to octeon_network.h
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ohad Oz says:

====================
Enable Mellanox switch device in I2C mode

The following patch set updates global to Mellanox Kconfig files to support
configuration of Mellanox Switch (mlxsw) without PCI and with I2C only.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch apply Mellanox network vendor which includes:
- Mellanox card devices: ConnectX-4, ConnectX-5 and Connect-IB cards.
- Mellanox switch device: SwitchX-2 Switch-IB, Spectrum.
Therefore rephrasing help.
Signed-off-by: Ohad Oz <ohado@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mellanox switches (mlxsw) supports I2C systems without PCI, in order to
give the ability to the users to use such functionality, there is need
to update Kconfig.
Signed-off-by: Ohad Oz <ohado@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using tabs instead of space for indentation.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: spectrum_router: Increase VRF scale

Ido says:

The purpose of this set is to increase the maximum number of supported VRF
devices on top of the Spectrum ASIC under different workloads.

This is achieved by sharing the same LPM tree across all the virtual
routers for a given L3 protocol (IPv4 / IPv6). The change is explained in
detail in the third patch. First two patches are small changes to make
review easier.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The number of LPM trees available for lookup is much smaller than the
number of virtual routers, which are used to implement VRFs. In
addition, an LPM tree can only be used by one protocol - either IPv4 or
IPv6.

Therefore, in order to increase the number of supported virtual routers
to the maximum we need to be able to share LPM trees across virtual
routers instead of trying to find an optimized tree for each.

Do that by allocating one LPM tree for each protocol, but make sure it
will only include prefixes that are actually used, so as to not perform
unnecessary lookups.

Since changing the structure of a bound tree isn't recommended, whenever
a new tree it required, it's first created and then bound to each
virtual router, replacing the old one.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of relying on the LPM tree to be assigned to the virtual router
before binding the two, lets pass it explicitly.

This will later allow us to return upon binding error instead of having
to perform a rollback of the assignment.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no point in returning a value from function whose return value
is never checked.

Even if the return value was checked, there wouldn't be anything to do
about it, as these functions are either called from error or deletion
paths.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Refactor code in order to avoid identical code for different branches.

This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Refactor code in order to avoid identical code for different branches.

This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- remove logging dependency upon global func octeon_console_debug_enabled()
- abstract debug console logging using console structure (via function ptr)
  to allow for more flexible logging
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The structure tap_fops is local to the source and does not need to
be in global scope, so make it static.

Cleans up sparse warning:
symbol 'tap_fops' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The array guest_offloads is local to the source and does not need to
be in global scope, so make it static. Also tweak formatting.

Cleans up sparse warnings:
symbol 'guest_offloads' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Looks  like gcc isn't always able to figure  out that 3 *if* branches in
of_phy_register_fixed_link() calling fixed_phy_register() at their ends
are similar enough and thus can be merged. The "manual" merge saves 40
bytes of the object code (AArch64 gcc 4.8.5), and still saves 12 bytes
even  if gcc was able to merge the branch tails (ARM gcc 4.8.5)...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: vrf: Support for local traffic with sockets bound to enslaved devices

This set gets local traffic working for sockets bound to enslaved
devices. The local rtable and rt6_info added in June 2016 to get
local traffic in VRFs working is no longer needed and actually
keeps local traffic for sockets bound to an enslaved device from
working. Patch 1 removes them.

Patch 2 adds a fix up for IPv4 IP_PKTINFO to return rt_iif for
packets sent over the VRF device. This is similar to the handling
of loopback.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to the loopback device, for packets sent through a VRF device
the index returned in ipi_ifindex needs to be the saved index in
rt_iif.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The VRF cached rtable and rt6_info for local traffic are no longer
needed and actually prevent local traffic through enslaved devices.
Remove them.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rt_iif is going to be set to either 0 or orig_oif. If orig_oif
is 0 it amounts to the same end result so remove the check.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The kernel log is not where users expect error messages for netlink
requests; as we have extended acks now, we can replace pr_debug() with
NL_SET_ERR_MSG_ATTR().
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jason Wang says:

====================
XDP support for tap

This series tries to implement XDP support for tap. Two path were
implemented:

- fast path: small & non-gso packet, For performance reason we do it
  at page level and use build_skb() to create skb if necessary.
- slow path: big or gso packet, we don't want to lose the capability
  compared to generic XDP, so we export some generic xdp helpers and
  do it after skb was created.

xdp1 shows about 41% improvement, xdp_redirect shows about 60%
improvement.

Changes from V1:
- fix the race between xdp set and free
- don't hold extra refcount
- add XDP_REDIRECT support

Please review.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch tries to implement XDP for tun. The implementation was
split into two parts:

- fast path: small and no gso packet. We try to do XDP at page level
  before build_skb(). For XDP_TX, since creating/destroying queues
  were completely under control of userspace, it was implemented
  through generic XDP helper after skb has been built. This could be
  optimized in the future.
- slow path: big or gso packet. We try to do it after skb was created
  through generic XDP helpers.

Test were done through pktgen with small packets.

xdp1 test shows ~41.1% improvement:

Before: ~1.7Mpps
After:  ~2.3Mpps

xdp_redirect to ixgbe shows ~60% improvement:

Before: ~0.8Mpps
After:  ~1.38Mpps
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>