When removing short term pins, I've changed the the batch buffer
pinning for relocation to use __i915_vma_pin, because
i915_gem_object_ggtt_pin_ww was destroying the old vma. This
caused regressions, because the functions are not identical.

Fix the regressions by calling i915_gem_object_ggtt_pin_ww() again
on ggtt-only platforms, but only if the batch can be pinned without
being moved.

Fixes: b5cfe6f7 ("drm/i915: Remove short-term pins from execbuf, v6.")
Cc: Matthew Auld <matthew.auld@intel.com>
Reported-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5806
Link: https://patchwork.freedesktop.org/patch/msgid/20220511115219.46507-1-maarten.lankhorst@linux.intel.com
(cherry picked from commit 451374ee)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

There are 2 ways an engine can get reset in i915 and the method of reset
affects how KMD labels a context as guilty/innocent.

(1) GuC initiated engine-reset: GuC resets a hung engine and notifies
KMD. The context that hung on the engine is marked guilty and all other
contexts are innocent. The innocent contexts are resubmitted.

(2) GT based reset: When an engine heartbeat fails to tick, KMD
initiates a gt/chip reset. All active contexts are marked as guilty and
discarded.

In order to correctly mark the contexts as guilty/innocent, pass a mask
of engines that were reset to __guc_reset_context.

Fixes: eb5e7da7 ("drm/i915/guc: Reset implementation for new GuC interface")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220426003045.3929439-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 303760aa)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Bspec has added some steps that check forDMC MMIO range before
programming them

v2: Fix for CI
v3: move register defines to .h (Anusha)
- Check MMIO restrictions per pipe
- Add MMIO restricton for v1 dmc header as well (Lucas)
v4: s/_PICK/_PICK_EVEN and use it only for Pipe DMC scenario.
- clean up sanity check logic.(Lucas)
- Add MMIO range for RKL as well.(Anusha)
v5: Use DISPLAY_VER instead of per platform check (Lucas)

BSpec: 49193

Cc: stable@vger.kernel.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511000847.1068302-1-anusha.srivatsa@intel.com
(cherry picked from commit 21c47196)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here is one fix, and three documentation updates for 5.18-rc7.

  The fix is for the firmware loader which resolves a long-reported
  problem where the credentials of the firmware loader could be set to a
  userspace process without enough permissions to actually load the
  firmware image. Many Android vendors have been reporting this for
  quite some time.

  The documentation updates are for the embargoed-hardware-issues.rst
  file to add a new entry, change an existing one, and sort the list to
  make changes easier in the future.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation/process: Update ARM contact for embargoed hardware issues
  Documentation/process: Add embargoed HW contact for Ampere Computing
  Documentation/process: Make groups alphabetical and use tabs consistently
  firmware_loader: use kernel credentials when reading firmware

Pull char/misc driver fixes from Greg KH:
 "Here are two small driver fixes for 5.18-rc7 that resolve reported
  problems:

   - slimbus driver irq bugfix

   - interconnect sync state bugfix

  Both of these have been in linux-next with no reported problems"

* tag 'char-misc-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  slimbus: qcom: Fix IRQ check in qcom_slim_probe
  interconnect: Restore sync state by ignoring ipa-virt in provider count

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty n_gsm and serial driver fixes for 5.18-rc7
  that resolve reported problems. They include:

   - n_gsm fixes for reported issues

   - 8250_mtk driver fixes for some platforms

   - fsl_lpuart driver fix for reported problem.

   - digicolor driver fix for reported problem.

  All have been in linux-next for a while with no reported problems"

* tag 'tty-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  fsl_lpuart: Don't enable interrupts too early
  tty: n_gsm: fix invalid gsmtty_write_room() result
  tty: n_gsm: fix mux activation issues in gsm_config()
  tty: n_gsm: fix buffer over-read in gsm_dlci_data()
  serial: 8250_mtk: Fix register address for XON/XOFF character
  serial: 8250_mtk: Make sure to select the right FEATURE_SEL
  serial: 8250_mtk: Fix UART_EFR register address
  tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()

Pull USB fixes from Greg KH:
 "Here are some small fixes for reported issues with some USB drivers.
  They include:

   - xhci fixes for xhci-mtk platform driver

   - typec driver fixes for reported problems.

   - cdc-wdm read-stuck fix

   - gadget driver fix for reported race condition

   - new usb-serial driver ids

  All of these have been in linux-next with no reported problems"

* tag 'usb-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: xhci-mtk: remove bandwidth budget table
  usb: xhci-mtk: fix fs isoc's transfer error
  usb: gadget: fix race when gadget driver register via ioctl
  usb: typec: tcpci_mt6360: Update for BMC PHY setting
  usb: gadget: uvc: allow for application to cleanly shutdown
  usb: typec: tcpci: Don't skip cleanup in .remove() on error
  usb: cdc-wdm: fix reading stuck on device close
  USB: serial: qcserial: add support for Sierra Wireless EM7590
  USB: serial: option: add Fibocom MA510 modem
  USB: serial: option: add Fibocom L610 modem
  USB: serial: pl2303: add device id for HP LM930 Display

Pull powerpc fix from Michael Ellerman:

 - Fix KVM PR on 32-bit, which was broken by some MMU code refactoring.

Thanks to: Alexander Graf, and Matt Evans.

* tag 'powerpc-5.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  KVM: PPC: Book3S PR: Enable MSR_DR for switch_mmu_context()

Pull x86 fix from Thomas Gleixner:
 "A single fix for the handling of unpopulated sub-pmd spaces.

  The copy & pasta from the corresponding s390 code screwed up the
  address calculation for marking the sub-pmd ranges via memset by
  omitting the ALIGN_DOWN() to calculate the proper start address.

  It's a mystery why this code is not generic and shared because there
  is nothing architecture specific in there, but that's too intrusive
  for a backportable fix"

* tag 'x86-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Fix marking of unused sub-pmd ranges

Pull scheduler fix from Thomas Gleixner:
 "The recent expansion of the sched switch tracepoint inserted a new
  argument in the middle of the arguments. This reordering broke BPF
  programs which relied on the old argument list.

  While tracepoints are not considered stable ABI, it's not trivial to
  make BPF cope with such a change, but it's being worked on. For now
  restore the original argument order and move the new argument to the
  end of the argument list"

* tag 'sched-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/tracing: Append prev_state to tp args instead

Pull irq fix from Thomas Gleixner:
 "A single fix for a recent (introduced in 5.16) regression in the core
  interrupt code.

  The consolidation of the interrupt handler invocation code added an
  unconditional warning when generic_handle_domain_irq() is invoked from
  outside hard interrupt context. That's overbroad as the requirement
  for invoking these handlers in hard interrupt context is only required
  for certain interrupt types. The subsequently called code already
  contains a warning which triggers conditionally for interrupt chips
  which indicate this requirement in their properties.

  Remove the overbroad one"

* tag 'irq-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Remove WARN_ON_ONCE() in generic_handle_domain_irq()

Merge tag 'perf-tools-fixes-for-v5.18-2022-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix two NDEBUG warnings in 'perf bench numa'

 - Fix ARM coresight `perf test` failure

 - Sync linux/kvm.h with the kernel sources

 - Add James and Mike as Arm64 performance events reviewers

* tag 'perf-tools-fixes-for-v5.18-2022-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  MAINTAINERS: Add James and Mike as Arm64 performance events reviewers
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  perf tests: Fix coresight `perf test` failure.
  perf bench: Fix two numa NDEBUG warnings

Pull more drm fixes from Dave Airlie:
 "Turns out I was right, some fixes hadn't made it to me yet. The vmwgfx
  ones also popped up later, but all seem like bad enough things to fix.
  The dma-buf, vc4 and nouveau ones are all pretty small.

  The fbdev fixes are a bit more complicated: a fix to cleanup fbdev
  devices properly, uncovered some use-after-free bugs in existing
  drivers. Then the fix for those bugs wasn't correct. This reverts that
  fix, and puts the proper fixes in place in the drivers to avoid the
  use-after-frees.

  This has had a fair number of eyes on it at this stage, and I'm
  confident enough that it puts things in the right place, and is less
  dangerous than reverting our way out of the initial change at this
  stage.

  fbdev:
   - revert NULL deref fix that turned into a use-after-free
   - prevent use-after-free in fbdev
   - efifb/simplefb/vesafb: fix cleanup paths to avoid use-after-frees

  dma-buf:
   - fix panic in stats setup

  vc4:
   - fix hdmi build

  nouveau:
   - tegra iommu present fix
   - fix leak in backlight name

  vmwgfx:
   - Black screen due to fences using FIFO checks on SVGA3
   - Random black screens on boot due to uninitialized drm_mode_fb_cmd2
   - Hangs on SVGA3 due to command buffers being used with gbobjects"

* tag 'drm-fixes-2022-05-14' of git://anongit.freedesktop.org/drm/drm:
  drm/vmwgfx: Disable command buffers on svga3 without gbobjects
  drm/vmwgfx: Initialize drm_mode_fb_cmd2
  drm/vmwgfx: Fix fencing on SVGAv3
  drm/vc4: hdmi: Fix build error for implicit function declaration
  dma-buf: call dma_buf_stats_setup after dmabuf is in valid list
  fbdev: efifb: Fix a use-after-free due early fb_info cleanup
  drm/nouveau: Fix a potential theorical leak in nouveau_get_backlight_name()
  drm/nouveau/tegra: Stop using iommu_present()
  fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove
  fbdev: efifb: Cleanup fb_info in .fb_destroy rather than .remove
  fbdev: simplefb: Cleanup fb_info in .fb_destroy rather than .remove
  fbdev: Prevent possible use-after-free in fb_release()
  Revert "fbdev: Make fb_release() return -ENODEV if fbdev was unregistered"

Multiple fixes to fbdev to address a regression at unregistration, an
iommu detection improvement for nouveau, a memory leak fix for nouveau,
pointer dereference fix for dma_buf_file_release(), and a build breakage
fix for vc4
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220513073044.ymayac7x7bzatrt7@houat

Merge tag 'vmwgfx-drm-fixes-5.18-2022-05-13' of https://gitlab.freedesktop.org/zack/vmwgfx into drm-fixes

vmwgfx fixes for:
- Black screen due to fences using FIFO checks on SVGA3
- Random black screens on boot due to uninitialized drm_mode_fb_cmd2
- Hangs on SVGA3 due to command buffers being used with gbobjects
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a1d32799e4c74b8540216376d7576bb783ca07ba.camel@vmware.com

Pull gfs2 fixes from Andreas Gruenbacher:
 "We've finally identified commit dc732906 ("gfs2: Introduce flag
  for glock holder auto-demotion") to be the other cause of the
  filesystem corruption we've been seeing. This feature isn't strictly
  necessary anymore, so we've decided to stop using it for now.

  With this and the gfs_iomap_end rounding fix you've already seen
  ("gfs2: Fix filesystem block deallocation for short writes" in this
  pull request), we're corruption free again now.

   - Fix filesystem block deallocation for short writes.

   - Stop using glock holder auto-demotion for now.

   - Get rid of buffered writes inefficiencies due to page faults being
     disabled.

   - Minor other cleanups"

* tag 'gfs2-v5.18-rc4-fix3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Stop using glock holder auto-demotion for now
  gfs2: buffered write prefaulting
  gfs2: Align read and write chunks to the page cache
  gfs2: Pull return value test out of should_fault_in_pages
  gfs2: Clean up use of fault_in_iov_iter_{read,write}able
  gfs2: Variable rename
  gfs2: Fix filesystem block deallocation for short writes

We're having unresolved issues with the glock holder auto-demotion mechanism
introduced in commit dc732906.  This mechanism was assumed to be essential
for avoiding frequent short reads and writes until commit 296abc0d
("gfs2: No short reads or writes upon glock contention").  Since then,
when the inode glock is lost, it is simply re-acquired and the operation
is resumed.  This means that apart from the performance penalty, we
might as well drop the inode glock before faulting in pages, and
re-acquire it afterwards.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

In gfs2_file_buffered_write, to increase the likelihood that all the
user memory we're trying to write will be resident in memory, carry out
the write in chunks and fault in each chunk of user memory before trying
to write it.  Otherwise, some workloads will trigger frequent short
"internal" writes, causing filesystem blocks to be allocated and then
partially deallocated again when writing into holes, which is wasteful
and breaks reservations.

Neither the chunked writes nor any of the short "internal" writes are
user visible.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Pull SCSI fixes from James Bottomley:
 "Four fixes, all in drivers.

  These patches mosly fix error legs and exceptional conditions
  (scsi_dh_alua, qla2xxx). The lpfc fixes are for coding issues with
  lpfc features"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Correct BDE DMA address assignment for GEN_REQ_WQE
  scsi: lpfc: Fix split code for FLOGI on FCoE
  scsi: qla2xxx: Fix missed DMA unmap for aborted commands
  scsi: scsi_dh_alua: Properly handle the ALUA transitioning state

Align the chunks that reads and writes are carried out in to the page
cache rather than the user buffers.  This will be more efficient in
general, especially for allocating writes.  Optimizing the case that the
user buffer is gfs2 backed isn't very useful; we only need to make sure
we won't deadlock.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Pull the return value test of the previous read or write operation out
of should_fault_in_pages().  In a following patch, we'll fault in pages
before the I/O and there will be no return value to check.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

No need to store the return value of the fault_in functions in separate
variables.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Instead of counting the number of bytes read from the filesystem,
functions gfs2_file_direct_read and gfs2_file_read_iter count the number
of bytes written into the user buffer.  Conversely, functions
gfs2_file_direct_write and gfs2_file_buffered_write count the number of
bytes read from the user buffer.  This is nothing but confusing, so
change the read functions to count how many bytes they have read, and
the write functions to count how many bytes they have written.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

When a write cannot be carried out in full, gfs2_iomap_end() releases
blocks that have been allocated for this write but haven't been used.

To compute the end of the allocation, gfs2_iomap_end() incorrectly
rounded the end of the attempted write down to the next block boundary
to arrive at the end of the allocation.  It would have to round up, but
the end of the allocation is also available as iomap->offset +
iomap->length, so just use that instead.

In addition, use round_up() for computing the start of the unused range.

Fixes: 64bc06bb ("gfs2: iomap buffered write support")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Pull ceph fix from Ilya Dryomov:
 "Two fixes to properly maintain xattrs on async creates and thus
  preserve SELinux context on newly created files and to avoid improper
  usage of folio->private field which triggered BUG_ONs.

  Both marked for stable"

* tag 'ceph-for-5.18-rc7' of https://github.com/ceph/ceph-client:
  ceph: check folio PG_private bit instead of folio->private
  ceph: fix setting of xattrs on async created inodes

Pull NFS client bugfixes from Trond Myklebust:
 "One more pull request. There was a bug in the fix to ensure that gss-
  proxy continues to work correctly after we fixed the AF_LOCAL socket
  leak in the RPC code. This therefore reverts that broken patch, and
  replaces it with one that works correctly.

  Stable fixes:

   - SUNRPC: Ensure that the gssproxy client can start in a connected
     state

  Bugfixes:

   - Revert "SUNRPC: Ensure gss-proxy connects on setup"

   - nfs: fix broken handling of the softreval mount option"

* tag 'nfs-for-5.18-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  nfs: fix broken handling of the softreval mount option
  SUNRPC: Ensure that the gssproxy client can start in a connected state
  Revert "SUNRPC: Ensure gss-proxy connects on setup"

Pull misc fixes from Andrew Morton:
 "Seven MM fixes, three of which address issues added in the most recent
  merge window, four of which are cc:stable.

  Three non-MM fixes, none very serious"

[ And yes, that's a real pull request from Andrew, not me creating a
  branch from emailed patches. Woo-hoo! ]

* tag 'mm-hotfixes-stable-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  MAINTAINERS: add a mailing list for DAMON development
  selftests: vm: Makefile: rename TARGETS to VMTARGETS
  mm/kfence: reset PG_slab and memcg_data before freeing __kfence_pool
  mailmap: add entry for martyna.szapar-mudlaw@intel.com
  arm[64]/memremap: don't abuse pfn_valid() to ensure presence of linear map
  procfs: prevent unprivileged processes accessing fdinfo dir
  mm: mremap: fix sign for EFAULT error return value
  mm/hwpoison: use pr_err() instead of dump_page() in get_any_page()
  mm/huge_memory: do not overkill when splitting huge_zero_page
  Revert "mm/memory-failure.c: skip huge_zero_page in memory_failure()"

Pull arm64 fixes from Will Deacon:

 - TLB invalidation workaround for Qualcomm Kryo-4xx "gold" CPUs

 - Fix broken dependency in the vDSO Makefile

 - Fix pointer authentication overrides in ISAR2 ID register

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Enable repeat tlbi workaround on KRYO4XX gold CPUs
  arm64: cpufeature: remove duplicate ID_AA64ISAR2_EL1 entry
  arm64: vdso: fix makefile dependency on vdso.so

Merge tag 'hwmon-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Restrict ltq-cputemp to SOC_XWAY to fix build failure

 - Add OF device ID table to tmp401 driver to enable auto-load

* tag 'hwmon-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ltq-cputemp) restrict it to SOC_XWAY
  hwmon: (tmp401) Add OF device ID table

Pull drm fixes from Dave Airlie:
 "Pretty quiet week on the fixes front, 4 amdgpu and one i915 fix.

  I think there might be a few misc fbdev ones outstanding, but I'll see
  if they are necessary and pass them on if so.

  amdgpu:

   - Disable ASPM for VI boards on ADL platforms

   - S0ix DCN3.1 display fix

   - Resume regression fix

   - Stable pstate fix

  i915:

   - fix for kernel memory corruption when running a lot of OpenCL tests
     in parallel"

* tag 'drm-fixes-2022-05-13' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu/ctx: only reset stable pstate if the user changed it (v2)
  Revert "drm/amd/pm: keep the BACO feature enabled for suspend"
  drm/i915: Fix race in __i915_vma_remove_closed
  drm/amd/display: undo clearing of z10 related function pointers
  drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems

With very limited vram on svga3 it's difficult to handle all the surface
migrations. Without gbobjects, i.e. the ability to store surfaces in
guest mobs, there's no reason to support intermediate svga2 features,
especially because we can fall back to fb traces and svga3 will never
support those in-between features.

On svga3 we wither want to use fb traces or screen targets
(i.e. gbobjects), nothing in between. This fixes presentation on a lot
of fusion/esxi tech previews where the exposed svga3 caps haven't been
finalized yet.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 2cd80dbd ("drm/vmwgfx: Add basic support for SVGA3")
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-5-zack@kde.org

Transition to drm_mode_fb_cmd2 from drm_mode_fb_cmd left the structure
unitialized. drm_mode_fb_cmd2 adds a few additional members, e.g. flags
and modifiers which were never initialized. Garbage in those members
can cause random failures during the bringup of the fbcon.

Initializing the structure fixes random blank screens after bootup due
to flags/modifiers mismatches during the fbcon bring up.

Fixes: dabdcdc9 ("drm/vmwgfx: Switch to mode_cmd2")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-7-zack@kde.org

Port of the vmwgfx to SVGAv3 lacked support for fencing. SVGAv3 removed
FIFO's and replaced them with command buffers and extra registers.
The initial version of SVGAv3 lacked support for most advanced features
(e.g. 3D) which made fences unnecessary. That is no longer the case,
especially as 3D support is being turned on.

Switch from FIFO commands and capabilities to command buffers and extra
registers to enable fences on SVGAv3.

Fixes: 2cd80dbd ("drm/vmwgfx: Add basic support for SVGA3")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-5-zack@kde.org

Merge tag 'icc-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus

Pull interconnect fixes from Georgi:
 "interconnect fixes for v5.18-rc

  This contains an additional fix for sc7180 and sdx55 platforms that helps
  them to enter suspend even on devices that don't have the most recent DT
  changes.

  - interconnect: Restore sync state by ignoring ipa-virt in provider count

  Signed-off-by: Georgi Djakov <djakov@kernel.org>"

* tag 'icc-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
  interconnect: Restore sync state by ignoring ipa-virt in provider count

The unused part precedes the new range spanned by the start, end parameters
of vmemmap_use_new_sub_pmd(). This means it actually goes from
ALIGN_DOWN(start, PMD_SIZE) up to start.

Use the correct address when applying the mark using memset.

Fixes: 8d400913 ("x86/vmemmap: handle unpopulated sub-pmd ranges")
Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220509090637.24152-2-ken@codelabs.ch

Johan writes:

USB-serial fixes for 5.18-rc7

Here are some new device ids.

All have been in linux-next with no reported issues.

* tag 'usb-serial-5.18-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: qcserial: add support for Sierra Wireless EM7590
  USB: serial: option: add Fibocom MA510 modem
  USB: serial: option: add Fibocom L610 modem
  USB: serial: pl2303: add device id for HP LM930 Display

Merge tag 'amd-drm-fixes-5.18-2022-05-11' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.18-2022-05-11:

amdgpu:
- Disable ASPM for VI boards on ADL platforms
- S0ix DCN3.1 display fix
- Resume regression fix
- Stable pstate fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511174422.5769-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2022-05-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

Fix for #5732: (Cc stable) kernel memory corruption when running a lot of OpenCL tests in parallel
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YnykW6L4e7vD3yl3@jlahtine-mobl.ger.corp.intel.com

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wireless, and bluetooth.

  No outstanding fires.

  Current release - regressions:

   - eth: atlantic: always deep reset on pm op, fix null-deref

  Current release - new code bugs:

   - rds: use maybe_get_net() when acquiring refcount on TCP sockets
     [refinement of a previous fix]

   - eth: ocelot: mark traps with a bool instead of guessing type based
     on list membership

  Previous releases - regressions:

   - net: fix skipping features in for_each_netdev_feature()

   - phy: micrel: fix null-derefs on suspend/resume and probe

   - bcmgenet: check for Wake-on-LAN interrupt probe deferral

  Previous releases - always broken:

   - ipv4: drop dst in multicast routing path, prevent leaks

   - ping: fix address binding wrt vrf

   - net: fix wrong network header length when BPF protocol translation
     is used on skbs with a fraglist

   - bluetooth: fix the creation of hdev->name

   - rfkill: uapi: fix RFKILL_IOCTL_MAX_SIZE ioctl request definition

   - wifi: iwlwifi: iwl-dbg: use del_timer_sync() before freeing

   - wifi: ath11k: reduce the wait time of 11d scan and hw scan while
     adding an interface

   - mac80211: fix rx reordering with non explicit / psmp ack policy

   - mac80211: reset MBSSID parameters upon connection

   - nl80211: fix races in nl80211_set_tx_bitrate_mask()

   - tls: fix context leak on tls_device_down

   - sched: act_pedit: really ensure the skb is writable

   - batman-adv: don't skb_split skbuffs with frag_list

   - eth: ocelot: fix various issues with TC actions (null-deref; bad
     stats; ineffective drops; ineffective filter removal)"

* tag 'net-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
  tls: Fix context leak on tls_device_down
  net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()
  net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending
  net: dsa: bcm_sf2: Fix Wake-on-LAN with mac_link_down()
  mlxsw: Avoid warning during ip6gre device removal
  net: bcmgenet: Check for Wake-on-LAN interrupt probe deferral
  net: ethernet: mediatek: ppe: fix wrong size passed to memset()
  Bluetooth: Fix the creation of hdev->name
  i40e: i40e_main: fix a missing check on list iterator
  net/sched: act_pedit: really ensure the skb is writable
  s390/lcs: fix variable dereferenced before check
  s390/ctcm: fix potential memory leak
  s390/ctcm: fix variable dereferenced before check
  net: atlantic: verify hw_head_ lies within TX buffer ring
  net: atlantic: add check for MAX_SKB_FRAGS
  net: atlantic: reduce scope of is_rsc_complete
  net: atlantic: fix "frag[0] not initialized"
  net: stmmac: fix missing pci_disable_device() on error in stmmac_pci_probe()
  net: phy: micrel: Fix incorrect variable type in micrel
  decnet: Use container_of() for struct dn_neigh casts
  ...