- 03 Feb, 2017 2 commits
-
-
Andrew Donnellan authored
The variable DISABLE_LATENT_ENTROPY_PLUGIN is defined when CONFIG_PAX_LATENT_ENTROPY is set. This is leftover from the original PaX version of the plugin code and doesn't actually exist. Change the condition to depend on CONFIG_GCC_PLUGIN_LATENT_ENTROPY instead. Fixes: 38addce8 ("gcc-plugins: Add latent_entropy plugin") Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Andrew Donnellan authored
Stub out the debugfs functions so that the build doesn't break when CONFIG_DEBUG_FS=n. Reported-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
-
- 02 Feb, 2017 13 commits
-
-
Nathan Fontenot authored
As we add the ability to do DLPAR of additional devices through the sysfs interface we need to know which devices are supported. This adds the reporting of supported devices with a comma separated list reported in the existing /sys/kernel/dlpar. Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
-
John Allen authored
Extend the existing PRRN infrastructure to perform the actual affinity updating for cpus and memory in addition to the device tree updating. For cpus, dynamic affinity updating already appears to exist in the kernel in the form of arch_update_cpu_topology(). For memory, we must place a READD operation on the hotplug queue for any phandle included in the PRRN event that is determined to be an LMB. Signed-off-by:
John Allen <jallen@linux.vnet.ibm.com> Reviewed-by:
-
John Allen authored
Currently, memory must be hot removed and subsequently re-added in order to dynamically update the affinity of LMBs specified by a PRRN event. Earlier implementations of the PRRN event handler ran into issues in which the hot remove would occur successfully, but a hotplug event would be initiated from another source and grab the hotplug lock preventing the hot add from occurring. To prevent this situation, this patch introduces the notion of a hot "readd" action for memory which atomizes a hot remove and a hot add into a single, serialized operation on the hotplug queue. Signed-off-by:
-
John Allen authored
When adding and removing LMBs we should make the acquire/release of the DRC a separate step to allow for a few improvements. First this will ensure that LMBs removed during a remove by count operation are all available if a error occurs and we need to add them back. By first removeing all the LMBs from the kernel before releasing their DRCs the LMBs are available to add back should an error occur. Also, this will allow for faster re-add operations of memory for PRRN event handling since we can skip the unneeded step of having to release the DRC and the acquire it back. Signed-off-by:
-
Madhavan Srinivasan authored
Signed-off-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by:
-
Michael Ellerman authored
Add a few things that have been missed from .gitignore over the years. Signed-off-by: -
Michael Ellerman authored
CONFIG_PPC_PTDUMP currently selects CONFIG_DEBUG_FS. But CONFIG_DEBUG_FS is user-selectable, so we shouldn't select it. Instead depend on it. Signed-off-by: -
Anton Blanchard authored
Commit db911217 ("powerpc: Turn on BPF_JIT in ppc64_defconfig") only added BPF_JIT to the ppc64 defconfig. Add it to our powernv and pseries defconfigs too. Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
-
Anton Blanchard authored
We added support for HAVE_CONTEXT_TRACKING, but placed the option inside PPC_PSERIES. This has the undesirable effect that NO_HZ_FULL can be enabled on a kernel with both powernv and pseries support, but cannot on a kernel with powernv only support. Signed-off-by:
-
Daniel Axtens authored
In __get_user_nosleep, we create an intermediate pointer for the user address we're about to fetch. We currently don't tag this pointer as const. Make it const, as we are simply dereferencing it, and it's scope is limited to the __get_user_nosleep macro. Signed-off-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
-
Daniel Axtens authored
In __get_user_nocheck, we create an intermediate pointer for the user address we're about to fetch. We currently don't tag this pointer as const. Make it const, as we are simply dereferencing it, and it's scope is limited to the __get_user_nocheck macro. Signed-off-by:
-
Daniel Axtens authored
In __get_user_check, we create an intermediate pointer for the user address we're about to fetch. We currently don't tag this pointer as const. Make it const, as we are simply dereferencing it, and it's scope is limited to the __get_user_check macro. Signed-off-by:
-
Michael Ellerman authored
opal_lpc_init() is called from an __init routine, and calls other __init routines, so should also be __init, init? Fixes: 023b13a5 ("powerpc/powernv: Add support for direct mapped LPC on POWER9") Signed-off-by:
-
- 31 Jan, 2017 7 commits
-
-
Reza Arbab authored
Use remove_pagetable() and friends for radix vmemmap removal. We do not require the special-case handling of vmemmap done in the x86 versions of these functions. This is because vmemmap_free() has already freed the mapped pages, and calls us with an aligned address range. So, add a few failsafe WARNs, but otherwise the code to remove physical mappings is already sufficient for vmemmap. Signed-off-by:
Reza Arbab <arbab@linux.vnet.ibm.com> Acked-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Reza Arbab authored
Tear down and free the four-level page tables of physical mappings during memory hotremove. Borrow the basic structure of remove_pagetable() and friends from the identically-named x86 functions. Reduce the frequency of tlb flushes and page_table_lock spinlocks by only doing them in the outermost function. There was some question as to whether the locking is needed at all. Leave it for now, but we could consider dropping it. Memory must be offline to be removed, thus not in use. So there shouldn't be the sort of concurrent page walking activity here that might prompt us to use RCU. Signed-off-by:
-
Reza Arbab authored
Wire up memory hotplug page mapping for radix. Share the mapping function already used by radix_init_pgtable(). Signed-off-by:
-
Reza Arbab authored
Move the page mapping code in radix_init_pgtable() into a separate function that will also be used for memory hotplug. The current goto loop progressively decreases its mapping size as it covers the tail of a range whose end is unaligned. Change this to a for loop which can do the same for both ends of the range. Signed-off-by:
-
Benjamin Herrenschmidt authored
Use the new non-PCI ISA bridge support to expose the POWER9 LPC bus as direct mapped via the ISA IO port range. This enables direct access via drivers such as 8250 Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
The POWER9 chip supports an LPC bus that isn't hanging off a PCI bus, so let's add support for that, mapping it to the reserved space at ISA_IO_BASE Signed-off-by:
-
Benjamin Herrenschmidt authored
We'll be adding non-PCI isa bridge support so let's not have all the definition in pci-bridge.h Signed-off-by:
-
- 30 Jan, 2017 11 commits
-
-
Gautham R. Shenoy authored
Document the device-tree bindings defining the the properties under the @power-mgt node in the device tree that describe the idle states for Linux running on baremetal POWER servers. These bindings are documented separately instead of using the the common idle state bindings since the idle-states on POWER servers are exposed as property arrays where as the common idle state bindings expect idle-states to be described as nodes. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Gautham R. Shenoy authored
The power9_idle_stop method currently takes only the requested stop level as a parameter and picks up the rest of the PSSCR bits from a hand-coded macro. This is not a very flexible design, especially when the firmware has the capability to communicate the psscr value and the mask associated with a particular stop state via device tree. This patch modifies the power9_idle_stop API to take as parameters the PSSCR value and the PSSCR mask corresponding to the stop state that needs to be set. These PSSCR value and mask are respectively obtained by parsing the "ibm,cpu-idle-state-psscr" and "ibm,cpu-idle-state-psscr-mask" fields from the device tree. In addition to this, the patch adds support for handling stop states for which ESL and EC bits in the PSSCR are zero. As per the architecture, a wakeup from these stop states resumes execution from the subsequent instruction as opposed to waking up at the System Vector. The older firmware sets only the Requested Level (RL) field in the psscr and psscr-mask exposed in the device tree. For older firmware where psscr-mask=0xf, this patch will set the default sane values that the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and TR). For the new firmware, the patch will validate that the invariants required by the ISA for the psscr values are maintained by the firmware. This skiboot patch that exports fully populated PSSCR values and the mask for all the stop states can be found here: https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html [Optimize the number of instructions before entering STOP with ESL=EC=0, validate the PSSCR values provided by the firimware maintains the invariants required as per the ISA suggested by Balbir Singh] Acked-by:
-
Gautham R. Shenoy authored
In the current code for powernv_add_idle_states, there is a lot of code duplication while initializing an idle state in powernv_states table. Add an inline helper function to populate the powernv_states[] table for a given idle state. Invoke this for populating the "Nap", "Fastsleep" and the stop states in powernv_add_idle_states. Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Gautham R. Shenoy authored
Balbir pointed out that the name of the function pnv_arch300_idle_init was inconsistent with the names of the variables and functions pertaining to POWER9 features in book3s_idle.S. This patch renames pnv_arch300_idle_init to pnv_power9_idle_init. This patch does not change any behaviour. Signed-off-by:
-
Gautham R. Shenoy authored
Currently all the low-power idle states are expected to wake up at reset vector 0x100. Which is why the macro IDLE_STATE_ENTER_SEQ that puts the CPU to an idle state and never returns. On ISA v3.0, when the ESL and EC bits in the PSSCR are zero, the CPU is expected to wake up at the next instruction of the idle instruction. This patch adds a new macro named IDLE_STATE_ENTER_SEQ_NORET for the no-return variant and reuses the name IDLE_STATE_ENTER_SEQ for a variant that allows resuming operation at the instruction next to the idle-instruction. Acked-by:
-
Alistair Popple authored
Add detection of NPU2 PHBs. NPU2/NVLink2 has a different register layout for the TCE kill register therefore TCE invalidation should be done via the OPAL call rather than using the register directly as it is for PHB3 and NVLink1. This changes TCE invalidation to use the OPAL call in the case of a NPU2 PHB model. Signed-off-by:
Alistair Popple <alistair@popple.id.au> Signed-off-by:
-
Alistair Popple authored
POWER9 contains an off core mmu called the nest mmu (NMMU). This is used by other hardware units on the chip to translate virtual addresses into real addresses. The unit attempting an address translation provides the majority of the context required for the translation request except for the base address of the partition table (ie. the PTCR) which needs to be programmed into the NMMU. This patch adds a call to OPAL to set the PTCR for the nest mmu in opal_init(). Signed-off-by:
-
Reza Arbab authored
Relax the check preventing us from hotplugging into an offline node. This limitation was added in commit 482ec7c4 ("[PATCH] powerpc numa: Support sparse online node map") to prevent adding resources to an uninitialized node. These days, there is no harm in doing so. The addition will actually cause the node to be initialized and onlined; add_memory_resource() calls hotadd_new_pgdat() (if necessary) and node_set_online(). Signed-off-by:
-
Reza Arbab authored
The flow of the main loop in parse_numa_properties() is overly complicated. Simplify it to be less confusing and easier to read. No functional change. The end of the main loop in parse_numa_properties() looks like this: for_each_node_by_type(...) { ... if (!condition) { if (--ranges) goto new_range; else continue; } statement(); if (--ranges) goto new_range; /* else * continue; <- implicit, this is the end of the loop */ } The only effect of !condition is to skip execution of statement(). This can be rewritten in a simpler way: for_each_node_by_type(...) { ... if (condition) statement(); if (--ranges) goto new_range; } Signed-off-by: -
Mahesh Salgaonkar authored
There are chances that multiple CPUs can call crash_fadump() simultaneously and would start duplicating same info to vmcoreinfo ELF note section. This causes makedumpfile to fail during kdump capture. One example is, triggering dumprestart from HMC which sends system reset to all the CPUs at once. makedumpfile --dump-dmesg /proc/vmcore read_vmcoreinfo_basic_info: Invalid data in /tmp/vmcoreinfoyjgxlL: CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971 makedumpfile Failed. Running makedumpfile --dump-dmesg /proc/vmcore failed (1). makedumpfile -d 31 -l /proc/vmcore read_vmcoreinfo_basic_info: Invalid data in /tmp/vmcoreinfo1mmVdO: CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971CRASHTIME=1475605971 makedumpfile Failed. Running makedumpfile -d 31 -l /proc/vmcore failed (1). Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
The proto VSID is built using both the MMU context id and effective segment ID (ESID). We should not have overlapping bits between those. That could result in us having a VSID collision. With the current code we missed masking the top bits of the ESID. This implies for kernel address we ended up using the top 4 bits of the ESID as part of the proto VSID, which is wrong. The current code use the top 4 context values (0x7fffc - 0x7ffff) for the kernel. With those context IDs used for the kernel, we don't run into VSID collisions because we get the same proto VSID irrespective of whether we mask the ESID bits or not. eg: ea = 0xf000000000000000 context = 0x7ffff w/out masking: proto_vsid = (0x7ffff << 6 | 0xf000000000000000 >> 40) = (0x1ffffc0 | 0xf00000) = 0x1ffffc0 with masking: proto_vsid = (0x7ffff << 6 | ((0xf000000000000000 >> 40) & 0x3f)) = (0x1ffffc0 | (0xf00000 & 0x3f)) = 0x1ffffc0 | 0) = 0x1ffffc0 So although there is no bug, the code is still overly subtle, so fix it to save ourselves pain in future. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
- 25 Jan, 2017 7 commits
-
-
Naveen N. Rao authored
With bpf_jit_binary_alloc(), we allocate at a page granularity and fill the rest of the space with illegal instructions to mitigate BPF spraying attacks, while having the actual JIT'ed BPF program at a random location within the allocated space. Under this scenario, it would be better to flush the entire allocated buffer rather than just the part containing the actual program. We already flush the buffer from start to the end of the BPF program. Extend this to include the illegal instructions after the BPF program. Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Daniel Borkmann authored
We have a check earlier to ensure we don't proceed if image is NULL. As such, the redundant check can be removed. Signed-off-by:
-
Andrew Donnellan authored
During EEH recovery, we deconfigure all AFUs whilst leaving the corresponding vPHB and virtual PCI device in place. If something attempts to interact with the AFU's PCI config space (e.g. running lspci) after the AFU has been deconfigured and before it's reconfigured, cxl_pcie_{read,write}_config() will read invalid values from the deconfigured struct cxl_afu and proceed to Oops when they try to dereference pointers that have been set to NULL during deconfiguration. Add a rwsem to struct cxl_afu so we can prevent interaction with config space while the AFU is deconfigured. Reported-by:Pradipta Ghosh <pradghos@in.ibm.com> Suggested-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # v4.9+ Signed-off-by:
Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by:
-
Vaibhav Jain authored
This change adds a force psl data cache flush during device shutdown callback. This should reduce a possibility of psl holding a dirty cache line while the CAPP is being reinitialized, which may result in a UE [load/store] machine check error. Signed-off-by:
-
Greg Kurz authored
The kernel API does not use anything from this header file. Signed-off-by:
Greg Kurz <groug@kaod.org> Reviewed-by:
-
Markus Elfring authored
This function already has multiple exit points, so there's no harm adding another. Although it looks odd to return directly in a function which takes a lock, we've actually just dropped the mmap_sem in this code, so there's really no reason to go via a label. And it means we can drop the unhelpfully named out2 label. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> [mpe: Rewrite change log] Signed-off-by:
-
Markus Elfring authored
Setting err and going to ldst_done just returns 0, without using err, so just return 0 directly. We already do that for other call sites in this function. Signed-off-by:
-
