It is useful for debug to see file descriptors for each event.

Before:

  $ perf stat -vvv -e cycles,cache-misses ls
  ...
  sys_perf_event_open: pid 12146  cpu -1  group_fd -1  flags 0x8
  ...
  sys_perf_event_open: pid 12146  cpu -1  group_fd 3  flags 0x8
  sys_perf_event_open failed, error -13

Now:

  $ perf stat -vvv -e cycles,cache-misses ls
  ...
  sys_perf_event_open: pid 12858  cpu -1  group_fd -1  flags 0x8 = 3
  ...
  sys_perf_event_open: pid 12858  cpu -1  group_fd 3  flags 0x8
  sys_perf_event_open failed, error -13
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1479764011-10732-2-git-send-email-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add a way to retrieve the preempt count as well as the latency flags from a
pevent_record.

  int pevent_data_preempt_count(pevent, record);

returns the preempt count of a record.

  int pevent_data_flags(pevent, record);

returns the latency flags for a record.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20161122113158.03a010a8@gandalf.local.homeSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Instead of using 1000000, use the define in time64.h instead.

Also remove the the duplicate defines for NSECS_PER_SEC.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20161121114149.67111981@gandalf.local.homeSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Another step in supporting cross annotation.

The arch specific tables are put in:

   tools/perf/arch/$ARCH/annotation/instructions.c

which, so far, just plug instructions to a bunch of parsers/formatters,
but may have more as the need arises.

This is an alternative implementation to a previous attempt made by Ravi
Bangoria.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-g3wt282lfa51j4qd0813e3az@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This is to cope with an ARM specific kludge introduced in the original
patch supporting ARM annotation, cfef25b8 ("perf annotate: ARM
support") that made functions with a '+' in its name to be skipped when
processing call instructions.

With this patchkit it should be possible to collect a perf.data file on
a ARM machine and then annotate it on a x86 workstation and have those
ARM kludges used.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2fi3sy7q3sssdi7m7cbe07gy@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Introduce a 'struct arch', where arch specific stuff will live, starting
with objdump's choice of comment delimitation character, that is '#' in
x86 while a ';' in arm.

This has some bits and pieces from a patch submitted by Ravi.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-f337tzjjcl8vtapgvjxmhrbx@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo-20161114' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

New features:

 - Allow querying and setting .perfconfig variables (Taeung Song)

 - Show branch information in callchains (predicted, TSX aborts, loop
   iteractions, etc) (Jin Yao)

Infrastructure changes:

 - Support kbuild's CFLAGS_REMOVE_ in tools/build (Jiri Olsa)

 - Plug building jvmti to the main perf Makefile (Jiri Olsa)

Documentation changes:

 - Update Intel PT documentation about context switch events (Arnaldo Carvalho de Melo)

 - Fix 'perf record --call-graph dwarf' help/config in builds not linking
   with a unwind library, mentioning that is a possible record option (Rabin Vincent)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

If the branch is 100% predicted then the "predicted" is hidden.
Similarly, if there is no branch tsx abort, the "abort" is hidden.
There is only cycles shown (cycle is supported on skylake platform,
older platform would be 0).

If no iterations, the "iterations" is hidden.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1477876794-30749-6-git-send-email-yao.jin@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

If the branch is 100% predicted then the "predicted" is hidden.
Similarly, if there is no branch tsx abort, the "abort" is hidden.
There is only cycles shown (cycle is supported on skylake platform,
older platform would be 0).

If no iterations, the "iterations" is hidden.

For example:

|--29.93%--main div.c:39 (predicted:50.6%, cycles:1, iterations:18)
|          main div.c:44 (predicted:50.6%, cycles:1)
|          |
|           --22.69%--main div.c:42 (cycles:2, iterations:17)
|                     compute_flag div.c:28 (cycles:2)
|                     |
|                      --10.52%--compute_flag div.c:27 (cycles:1)
|                                rand rand.c:28 (cycles:1)
|                                rand rand.c:28 (cycles:1)
|                                __random random.c:298 (cycles:1)
|                                __random random.c:297 (cycles:1)
|                                __random random.c:295 (cycles:1)
|                                __random random.c:295 (cycles:1)
|                                __random random.c:295 (cycles:1)
|                                __random random.c:295 (cycles:6)
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1477876794-30749-5-git-send-email-yao.jin@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Create some branch counters in per callchain list entry. Each counter
is for a branch flag. For example, predicted_count counts all the
*predicted* branches. The counters get updated by processing the
callchain cursor nodes.

It also provides functions to retrieve or print the values of counters
in callchain list.

Besides the counting for branch flags, it also counts and returns the
average number of iterations.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1477876794-30749-4-git-send-email-yao.jin@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Create a new flag show_branchflag_count in symbol_conf. The flag is used
to control if showing the branch flag counting information. The flag
depends on if the perf.data has branch data and if user chooses the
"branch-history" option in perf report command line.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1477876794-30749-3-git-send-email-yao.jin@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Since the branch ip has been added to call stack for easier browsing,
this patch adds more branch information. For example, add a flag to
indicate if this ip is a branch, and also add with the branch flag.

Then we can know if the cursor node represents a branch and know what
the branch flag it has.

The branch history code has a loop detection pass that removes loops. It
would be nice for knowing how many loops were removed then in next
steps, we can compute out the average number of iterations.

For example:

Before remove_loops(),
entry0: from = 0x100, to = 0x200
entry1: from = 0x300, to = 0x250
entry2: from = 0x300, to = 0x250
entry3: from = 0x300, to = 0x250
entry4: from = 0x700, to = 0x800

After remove_loops()
entry0: from = 0x100, to = 0x200
entry1: from = 0x300, to = 0x250
entry2: from = 0x700, to = 0x800

The original entry2 and entry3 are removed. So the number of iterations
(from = 0x300, to = 0x250) is equal to removed number + 1 (2 + 1).

iterations = removed number + 1;
average iteractions = Sum(iteractions) / number of samples

This formula ignores other cases, for example, iterations cross multiple
buffers and one buffer contains 2+ loops. Because in practice, it's good
enough.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/n/1477876794-30749-2-git-send-email-yao.jin@linux.intel.com
[ Renamed 'iter' to 'nr_loop_iter' for clarity ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To write config items to a particular config file, we should know where
is each config section and item from.

Current setting functionality of perf-config use autogenerating way by
overwriting collected config items to a config file.

For example, when collecting config items from user and system config
files (i.e. ~/.perfconfig and $(sysconf)/perfconfig), perf_config_set
can contain both user and system config items.  So we should know where
each value is from to avoid merging user and system config items on user
config file.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Nambong Ha <over3025@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wookje Kwon <aweee0@gmail.com>
Link: http://lkml.kernel.org/r/1478241862-31230-7-git-send-email-treeze.taeung@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add setting feature that can add config variables with their values to a
config file (i.e. user or system config file) or modify config key-value
pairs in a config file.  For the syntax examples:

    perf config [<file-option>] [section.name[=value] ...]

e.g. You can set the ui.show-headers to false with

    # perf config ui.show-headers=false

If you want to add or modify several config items, you can do like

    # perf config annotate.show_nr_jumps=false kmem.default=slab

Committer notes:

Testing it:

  $ perf config -l
  top.children=true
  report.children=false
  $
  $ perf config top.children=false
  $ perf config -l
  top.children=false
  report.children=false
  $
  $ perf config kmem.default=slab
  $ perf config -l
  top.children=false
  report.children=false
  kmem.default=slab
  $
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Nambong Ha <over3025@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wookje Kwon <aweee0@gmail.com>
Link: http://lkml.kernel.org/r/1478241862-31230-5-git-send-email-treeze.taeung@gmail.com
[ Combined patch with docs update with this one ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

You can show the values for several config items as below:

    # perf config report.queue-size call-graph.record-mode

but it is necessary to more precisely check arguments, before passing
them to show_spec_config().  This validation function would be also used
when parsing config key-value pairs arguments in the near future.

Committer notes:

Testing it:

  $ perf config bla.
  The config variable does not contain a variable name: bla.
  $ perf config .bla
  The config variable does not contain a section name: .bla
  $ perf config bla.bla
  $
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Nambong Ha <over3025@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wookje Kwon <aweee0@gmail.com>
Link: http://lkml.kernel.org/r/1478241862-31230-4-git-send-email-treeze.taeung@gmail.com
[ Fix some spelling errors ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add a functionality getting specific config key-value pairs.
For the syntax examples,

    perf config [<file-option>] [section.name ...]

e.g. To query config items 'report.queue-size' and 'report.children', do

    # perf config report.queue-size report.children
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Nambong Ha <over3025@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wookje Kwon <aweee0@gmail.com>
Link: http://lkml.kernel.org/r/1478241862-31230-2-git-send-email-treeze.taeung@gmail.com
[ Combined patch with docs update with this one ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Now when jvmti compilation is plugged into Makefile.perf, there's no
need for this makefile.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/20161112121016.GA17194@kravaSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Compile jvmti agent as part of the perf build. The agent library is
called libperf-jvmti.so and is installed in default place together with
other files:

  $ make libperf-jvmti.so
    BUILD:   Doing 'make -j4' parallel build
    ...
    CC       jvmti/libjvmti.o
    CC       jvmti/jvmti_agent.o
    LD       jvmti/jvmti-in.o
    LINK     libperf-jvmti.so

  $ make DESTDIR=/tmp/krava/ install-bin
  ...
  $ find /tmp/krava/ | grep libperf
  /tmp/krava/lib64/libperf-jvmti.so
  /tmp/krava/lib64/libperf-gtk.so
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1478093749-5602-4-git-send-email-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Adding support to detect jvmti support. It is not plugged into the
FEATURE_TESTS machinery, because it's quite rare and will be used
separately from perf via feature_check call.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1478093749-5602-3-git-send-email-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Adding support to remove options from final CFLAGS for both object file
and build target. It's now possible to remove CFLAGS options like:

  CFLAGS_REMOVE_krava.o += -Wstrict-prototypes

Committer notes:

This comes from the kernel's kbuild infrastructure, the subset that is
supported in tools/ is being documented at tools/build/Documentation/Build.txt.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1478093749-5602-2-git-send-email-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Since the unprivileged sched switch event was added in perf, PT doesn't
need need perf_event_paranoid=-1 anymore for per cpu decoding.

Add a note stating that that is only needed for kernels < 4.2.
Reported-by: Andi Kleen <ak@linux.intel.com>
Report-Link: http://lkml.kernel.org/r/http://lkml.kernel.org/n/tip-x2ybghpqxxn3zu0m8o7qi42r@git.kernel.orgAcked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 45ac1403 ("perf: Add PERF_RECORD_SWITCH to indicate context switches")
Link: http://lkml.kernel.org/n/tip-x2ybghpqxxn3zu0m8o7qi42r@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Since 841e3558 ("perf callchain: Recording 'dwarf' callchains do not
need DWARF unwinding support"), --call-graph dwarf is allowed in 'perf
record' even without unwind support.  A couple of other places don't
reflect this yet though: the help text should list dwarf as a valid
record mode and the dump_size config should be respected too.
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Cc: He Kuang <hekuang@huawei.com>
Fixes: 841e3558 ("perf callchain: Recording 'dwarf' callchains do not need DWARF unwinding support")
Link: http://lkml.kernel.org/r/1470837148-7642-1-git-send-email-rabin.vincent@axis.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo-20161028' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

perf/core improvements and fixes from Arnaldo Carvalho de Melo:

New features:

- Support matching by topic in 'perf list' (Andi Kleen)

User visible:

- Apply cpu color only when there was activity in 'perf sched map' (Namhyung Kim)

- Always show the task's COMM in 'perf sched map -v' (Namhyung Kim)

- Fix hierarchy column counts in the perf hist browser (top, report), avoiding
  showing nothing after pressing the RIGHT key a number of times (Namhyung Kim)

Infrastructure:

- Support cascading options in libsubcmd and use it to share common options in
  'perf sched' subcommands (Namhyung Kim)

- Avoid worker cacheline bouncing in 'perf bench futex' (Davidlohr Bueso)

- Sanitize numeric parameters in 'perf bench futex' (Davidlohr Bueso)

- Update copies of kernel files (Arnaldo Carvalho de Melo)

- Fix scripting (perl, python) setup to avoid leaks (Arnaldo Carvalho de Melo)

- Add missing object file to the python binding linkage list (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

In ac12f676 ("perf tools: Implement branch_type event parameter") we
started using the parse_branch_str() function from one of the files used
in the python binding, which caused this entry in 'perf test' to fail:

  # perf test -v python
  16: Try 'import perf' in python, checking link problems      :
  --- start ---
  test child forked, pid 16667
  Traceback (most recent call last):
    File "<stdin>", line 1, in <module>
  ImportError: /tmp/build/perf/python/perf.so: undefined symbol:
  parse_branch_str
  test child finished with -1
  ---- end ----
  Try 'import perf' in python, checking link problems: FAILED!
  #

I must've commited some mistake when running 'perf test' to send the
pull request for the perf-core-for-mingo-20161024 tag, to have let this
regression to pass, sigh.

Just add tools/perf/util/parse-branch-options.c and switch from using
ui__warning(), that is not available in the python binding, use
pr_warning() instead, which is good enough for this case.

Now:

  # perf test python
  16: Try 'import perf' in python, checking link problems      : Ok
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Fixes: ac12f676 ("perf tools: Implement branch_type event parameter")
Link: http://lkml.kernel.org/n/tip-9kn1ct1cx9ppwqlmzl6z0xhs@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Removing one more set of die() calls.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-6pyil685m5i2tugg56gcy0tg@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Both register_perl_scripting() and register_python_scripting() allocate
this variable, fix it by checking if it already was.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 7e4b21b8 ("perf/scripts: Add Python scripting engine")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Introduced in commit f9afc619 ("x86: Wire up protection keys system
calls")

This will make 'perf trace' aware of them on x86_64.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-s1ta2ttv2xacecqogmd3a9p1@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To get the defines introduced in the commit e8c24d3a ("x86/pkeys:
Allocation/free syscalls")

Silencing this perf build warning:

  Warning: tools/include/uapi/asm-generic/mman-common.h differs from kernel

Need to change 'perf trace' to beautify those syscalls, as soon as
booting with a kernel with it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-yev9rexu02cl7cjeozzmrl9t@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Ignore export.h and EXPORT_SYMBOL in:

  784d5699 ("x86: move exports to actual definitions")

We're not dragging this stuff, not useful in tools/

This silences the following warnings while building perf:

  Warning: tools/arch/x86/lib/memcpy_64.S differs from kernel
  Warning: tools/arch/x86/lib/memset_64.S differs from kernel

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-h9vw3pe0fq79zmyqsfr0s0mo@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add support in perf list topic to only show events belonging to a
specific vendor events topic. For example the following works now:

  % perf list frontend
  List of pre-defined events (to be used in -e):

    stalled-cycles-frontend OR idle-cycles-frontend    [Hardware event]

    stalled-cycles-frontend OR cpu/stalled-cycles-frontend/ [Kernel PMU event]

  frontend:
    dsb2mite_switches.count
         [Decode Stream Buffer (DSB)-to-MITE switches]
    dsb2mite_switches.penalty_cycles
         [Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles]
    dsb_fill.exceed_dsb_lines
         [Cycles when Decode Stream Buffer (DSB) fill encounter more than 3 Decode Stream Buffer (DSB)
          lines]
    icache.hit
         [Number of Instruction Cache, Streaming Buffer and Victim Cache Reads. both cacheable and
          noncacheable, including UC fetches]
  ...
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1476902724-9586-2-git-send-email-andi@firstfloor.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Joonwoo reported that there's a mismatch between timestamps in script
and sched commands.  This was because of difference in printing the
timestamp.  Factor out the code and share it so that they can be in
sync.  Also I found that sched map has similar problem, fix it too.

Committer notes:

Fixed the max_lat_at bug introduced by Namhyung's original patch, as
pointed out by Joonwoo, and made it a function following the scnprintf()
model, i.e. returning the number of bytes formatted, and receiving as
the first parameter the object from where the data to the formatting is
obtained, renaming it from:

   char *timestamp_in_usec(char *bf, size_t size, u64 timestamp)

to

   int timestamp__scnprintf_usec(u64 timestamp, char *bf, size_t size)
Reported-by: Joonwoo Park <joonwoop@codeaurora.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161024020246.14928-3-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

I'd like to see the name of tasks with perf sched map, but it only shows
name of new tasks and then use short names after all.  This is not good
for long running tasks since it's hard for users to track the short
names.  This patch makes it show the names (except the idle task) when
-v option is used.  Probably we may make it as default behavior.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161024020246.14928-2-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Applying cpu color always doesn't help readability IMHO.  Instead it
might be better to applying the color when there's an activity on those
CPUs.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161024020246.14928-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The -i and -v options can be used in subcommands so enable cascading the
sched_options.  This fixes the following inconvenience in 'perf sched':

  $ perf sched -i perf.data.sched  map
  ... (it works well) ...

  $ perf sched map  -i perf.data.sched
    Error: unknown switch `i'

   Usage: perf sched map [<options>]

          --color-cpus <cpus>
                            highlight given CPUs in map
          --color-pids <pids>
                            highlight given pids in map
          --compact         map output in compact mode
          --cpus <cpus>     display given CPUs in map

With this patch, the second command line works with the perf.data.sched
data file.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20161024030003.28534-2-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Sometimes subcommand have common options and it can only handled in the
upper level command unless it duplicates the options.

This patch adds a parent field and fallback to the parent if the given
argument was not found in the current options.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20161024030003.28534-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The perf report/top on TUI supports horizontal scrolling using LEFT and
RIGHT keys.

But it calculate the number of columns incorrectly when hierarchy mode
is enabled so that keep pressing RIGHT key can make the output
disappeared.

In the hierarchy mode, all sort keys are collapsed into a single column,
so it needs to be applied when calculating column numbers.
Reported-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161024162110.17918-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This gets rid of oddities such as:

  perf bench futex hash -t -4
  perf: calloc: Cannot allocate memory

Runtime (and many more) are equally busted, i.e. run for bogus amounts of
time. Just use the abs, instead of, for example errorring out.

Committer note:

After the patch:

  $ perf bench futex hash -t -4
  # Running 'futex/hash' benchmark:
  Run summary [PID 10178]: 4 threads, each operating on 1024 [private] futexes for 10 secs.

  [thread  0] futexes: 0x34f9fa0 ... 0x34faf9c [ 4702208 ops/sec ]
  [thread  1] futexes: 0x34fb140 ... 0x34fc13c [ 4707020 ops/sec ]
  [thread  2] futexes: 0x34fc2e0 ... 0x34fd2dc [ 4711526 ops/sec ]
  [thread  3] futexes: 0x34fd480 ... 0x34fe47c [ 4709683 ops/sec ]

  Averaged 4707609 operations/sec (+- 0.04%), total secs = 10
  $
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/1477342613-9938-3-git-send-email-dave@stgolabs.netSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Sebastian noted that overhead for worker thread ops (throughput)
accounting was producing 'perf' to appear in the profiles, consuming a
non-trivial (i.e. 13%) amount of CPU.

This is due to cacheline bouncing due to the increment of w->ops.

We can easily fix this by just working on a local copy and updating the
actual worker once done running, and ready to show the program summary.
There is no danger of the worker being concurrent, so we can trust that
no stale value is being seen by another thread.

This also gets rid of the unnecessary cache alignment hack; its not
worth it.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/1477342613-9938-2-git-send-email-dave@stgolabs.netSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo-20161024' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

New features:

- Dynamicly change verbosity level by pressing 'V' in the 'perf top/report'
  hists TUI browser (Alexis Berlemont)

- Implement 'perf trace --delay' in the same fashion as in 'perf record --delay',
  to skip sampling workload initialization events (Alexis Berlemont)

- Make vendor named events case insensitive in 'perf list', i.e.
  'perf list LONGEST_LAT' works just the same as  'perf list longest_lat' (Andi Kleen)

- Show instruction bytes and lenght in 'perf script' for Intel PT and BTS (Andi Kleen, Adrian Hunter)

   E.g:

    % perf record -e intel_pt// foo
    % perf script --itrace=i0ns -F ip,insn,insnlen
     ffffffff8101232f ilen: 5 insn: 0f 1f 44 00 00
     ffffffff81012334 ilen: 1 insn: 5b
     ffffffff81012335 ilen: 1 insn: 5d
     ffffffff81012336 ilen: 1 insn: c3
     ffffffff810123e3 ilen: 1 insn: 5b
     ffffffff810123e4 ilen: 2 insn: 41 5c
     ffffffff810123e6 ilen: 1 insn: 5d
     ffffffff810123e7 ilen: 1 insn: c3
     ffffffff810124a6 ilen: 2 insn: 31 c0
     ffffffff810124a8 ilen: 9 insn: 41 83 bc 24 a8 01 00 00 01
     ffffffff810124b1 ilen: 2 insn: 75 87

- Allow enabling the perf_event_attr.branch_type attribute member: (Andi Kleen)

  perf record -e sched:sched_switch,cpu/cpu-cycles,branch_type=any/ ...

- Add unwinding support for jitdump (Stefano Sanfilippo)

Fixes:

- Use raw_syscall:sys_enter timestamp in 'perf trace' (Arnaldo Carvalho de Melo)

Infrastructure:

- Allow jitdump to be built without libdwarf (Maciej Debski)

- Sync x86's syscall table tools/ copy (Arnaldo Carvalho de Melo)

- Fixes to avoid calling die() in library fuctions already propagating other
  errors (Arnaldo Carvalho de Melo)

- Improvements to allow libtraceevent to be properly installed in distro
  packages (Jiri Olsa)

- Removing coresight miscellaneous debug output (Mathieu Poirier)

- Cache align the 'perf bench futex' worker struct (Sebastian Andrzej Siewior)

Documentation:

- Minor improvements on the documentation of event parameters (Andi Kleen)

- Add jitdump format specification document (Stephane Eranian)

Spelling fixes:

- Fix typo "No enough" to "Not enough" (Alexander Alemayhu)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Printing the full path of the selected link is obviously not needed,
hence removing.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1476913323-6836-1-git-send-email-mathieu.poirier@linaro.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>