The documentation comments in this file are out of
date with the code, so fix this to avoid the
following warnings:

arch/arm/mach-omap2/omap_device.c:133: warning: Function parameter or member 'pdev' not described in 'omap_device_build_from_dt'
arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'pdev_name' description in 'omap_device_build_from_dt'
arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'pdev_id' description in 'omap_device_build_from_dt'
arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'oh' description in 'omap_device_build_from_dt'
arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'pdata' description in 'omap_device_build_from_dt'
arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'pdata_len' description in 'omap_device_build_from_dt'
arch/arm/mach-omap2/omap_device.c:309: warning: Function parameter or member 'pdev' not described in 'omap_device_get_context_loss_count'
arch/arm/mach-omap2/omap_device.c:309: warning: Excess function parameter 'od' description in 'omap_device_get_context_loss_count'
arch/arm/mach-omap2/omap_device.c:335: warning: Function parameter or member 'ohs' not described in 'omap_device_alloc'
arch/arm/mach-omap2/omap_device.c:335: warning: Function parameter or member 'oh_cnt' not described in 'omap_device_alloc'
arch/arm/mach-omap2/omap_device.c:335: warning: Excess function parameter 'oh' description in 'omap_device_alloc'
arch/arm/mach-omap2/omap_device.c:335: warning: Excess function parameter 'pdata' description in 'omap_device_alloc'
arch/arm/mach-omap2/omap_device.c:335: warning: Excess function parameter 'pdata_len' description in 'omap_device_alloc'
arch/arm/mach-omap2/omap_device.c:659: warning: Function parameter or member 'pdev' not described in 'omap_device_register'
arch/arm/mach-omap2/omap_device.c:659: warning: Excess function parameter 'od' description in 'omap_device_register'
arch/arm/mach-omap2/omap_device.c:682: warning: Function parameter or member 'pdev' not described in 'omap_device_enable'
arch/arm/mach-omap2/omap_device.c:682: warning: Excess function parameter 'od' description in 'omap_device_enable'
arch/arm/mach-omap2/omap_device.c:713: warning: Function parameter or member 'pdev' not described in 'omap_device_idle'
arch/arm/mach-omap2/omap_device.c:713: warning: Excess function parameter 'od' description in 'omap_device_idle'
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

All of arch/arm/mach-omap1/Kconfig is enclosed in a big "if ARCH_OMAP1"
and so every symbol already has a dependency on ARCH_OMAP1 even without
mentioning it in their list of dependencies.

Also dependencies on ARCH_OMAP can be dropped as it is selected by
ARCH_OMAP1.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Remove duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix a typo ("Initiaize").
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Message-Id: <20191002145301.11332-1-j.neuschaefer@gmx.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

All TI_ST users have been migrated to the new serdev based HCILL
bluetooth driver. That driver is initialized from DT and does not
need any platform quirks.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The omap44xx_sha0_hwmod and omap44xx_l3_main_2__des objects are
not exported so make them static to avoid the following warnings:

arch/arm/mach-omap2/omap_hwmod_44xx_data.c:793:19: warning: symbol 'omap44xx_sha0_hwmod' was not declared. Should it be static?
arch/arm/mach-omap2/omap_hwmod_44xx_data.c:977:26: warning: symbol 'omap44xx_l3_main_2__des' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The prm_{save,restore}_context functions are not exported
so make them static to avoid the following warnings:

arch/arm/mach-omap2/prm44xx.c:748:6: warning: symbol 'prm_save_context' was not declared. Should it be static?
arch/arm/mach-omap2/prm44xx.c:759:6: warning: symbol 'prm_restore_context' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The dra7xx_sha0_hwmod object is not exported outside of
omap_hwmod_7xx_data. so make it static to avoid the
following warning:

arch/arm/mach-omap2/omap_hwmod_7xx_data.c:686:19: warning: symbol 'dra7xx_sha0_hwmod' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Do not export am43xx_control_{save,restore}_context to avoid
the foloowing warnings:

arch/arm/mach-omap2/control.c:687:6: warning: symbol 'am43xx_control_save_context' was not declared. Should it be static?
arch/arm/mach-omap2/control.c:701:6: warning: symbol 'am43xx_control_restore_context' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Looks like the i2c timings in high-speed mode do not work properly to
allow us to clear I2C_DISABLE bits for PRM_VOLTCTRL register and the
device reboots if I2C_DISABLE bits are cleared.

Let's configure the voltage controller i2c for low-speed mode as done in
the Motorola Mapphone Android Linux kernel. This saves us about 7mW of
power during retention compared to the high-speed values.

Let's also change the low-speed warning to pr_info about relying on the
bootloader configured low-speed values like we currently do.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Similar to existing omap3_vc_set_pmic_signaling(), let's add omap4
specific omap4_vc_set_pmic_signaling(). This allows the configured
devices to enable voltage controller for retention later on during
init.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix sparse warnings:

arch/arm/mach-omap2/pmic-cpcap.c:29:15: warning: symbol 'omap_cpcap_vsel_to_uv' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:43:15: warning: symbol 'omap_cpcap_uv_to_vsel' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:93:15: warning: symbol 'omap_max8952_vsel_to_uv' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:107:15: warning: symbol 'omap_max8952_uv_to_vsel' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:140:15: warning: symbol 'omap_fan535503_vsel_to_uv' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:155:15: warning: symbol 'omap_fan535508_vsel_to_uv' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:173:15: warning: symbol 'omap_fan535503_uv_to_vsel' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:192:15: warning: symbol 'omap_fan535508_uv_to_vsel' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can make clkdm_clk_enable() usable for clkdm_hwmod_enable() by
dropping the unused clock check, and drop _clkdm_clk_hwmod_enable().

And we can make clkdm_hwmod_disable() call clkdm_hwmod_disable() and drop
the duplicate code in clkdm_hwmod_disable().

Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We're only using static _enable_wakeup(), the others have no callers.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We're missing initializing the PRM_VOLTCTRL register for voltage
controller. Let's add omap4_vc_init_pmic_signaling() similar to what we
have for omap3 and enable voltage control for retention.

This brings down droid4 power consumption with mainline kernel to somewhere
between 40 and 50mW from about 70 to 80 mW for the whole device when
running idle with LCD and backlight off, WLAN connected, and USB and modem
modules unloaded.

Mostly just rmmod of omap2430, ohci-platform and phy-mapphone-mdm6600 are
needed to idle USB and shut down the modem. And after that measuring idle
power consumption can be done with reading sysfs entry periodically
for /sys/class/power_supply/battery/power_avg. Then rmmod of phy-cpcap-usb
will save few more mW, but will disable the debug UART.

Note that sometimes CM_L4PER_UART1_CLKCTRL at 0x4a009540 does not idle
properly after unloading of phy-mapphone-mdm6600.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Commit f74297dd ("ARM: OMAP2+: Make sure LOGICRETSTATE bits are not
cleared") disabled oswr (open switch retention) for per and core domains
as various GPIO related issues were noticed if the bootloader had
configured the bits for LOGICRETSTATE for per and core domains.

With the recent gpio-omap fixes, mostly related to commit e6818d29
("gpio: gpio-omap: configure edge detection for level IRQs for idle
wakeup"), things now behave for enabling core oswr for omap4.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Commit f74297dd ("ARM: OMAP2+: Make sure LOGICRETSTATE bits are not
cleared") disabled oswr (open switch retention) for per and core domains
as various GPIO related issues were noticed if the bootloader had
configured the bits for LOGICRETSTATE for per and core domains.

With the recent gpio-omap fixes, mostly related to commit e6818d29
("gpio: gpio-omap: configure edge detection for level IRQs for idle
wakeup"), things now behave for enabling per oswr for omap4.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can configure voltage controller for cpcap with the data available in
Motorola Mapphone Android Linux kernel. Let's add it so we can have droid4
behave the same way for voltage controller as other omap4 devices and save
some power when idle.

Note that we're now using high-speed i2c mode, looks like the Motorola
kernel had a typo using 0x200 instead of 200 for the timings which may
caused it to not work properly.

Also note that in the long run, this should just become dts data for a
voltage controller device driver. But let's get things working first to
make it possible to test further changes easily.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The current operating points in the mainline kernel are out of date for
at least omap4430. Let's use the values from Motorola Mapphone Linux
Android kernel as presumably those have been verified.

Note that these are only used by voltage controller, they do not enable
any new operating points for cpufreq. Looking at the recent omap3 cpufreq
related patches posted, that's a totally separate series of patches.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>

In general we want to see a quiet dmesg output with no errors or warnings
unless something is really wrong and needs attention. We currently see
these bogus warnings on boot:

twl: not initialized
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
...

Let's avoid these by checking if a device tree node for cpcap PMIC exists.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The wkup domain is always on and does not have logic off setting. This
got accidentally added by commit f74297dd ("ARM: OMAP2+: Make sure
LOGICRETSTATE bits are not cleared") but is harmless.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

After commit 32d174ed ("ARM: OMAP4: MPUSS PM: remove unnecessary
shim functions for powerdomain control") this is no longer used.

The code continues execution after context restore on the same CPU,
so we can just use pm_info->pwrdm.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Commit 572cf7d7 ("ARM: dts: Improve omap l4per idling with wlcore edge
sensitive interrupt") changed wlcore interrupts to use edge interrupt based
on what's specified in the wl1835mod.pdf data sheet.

However, there are still cases where we can have lost interrupts as
described in omap_gpio_unidle(). And using a level interrupt instead of edge
interrupt helps as we avoid the check for untriggered GPIO interrupts in
omap_gpio_unidle().

And with commit e6818d29 ("gpio: gpio-omap: configure edge detection
for level IRQs for idle wakeup") GPIOs idle just fine with level interrupts.

Let's change omap4 and 5 wlcore users back to using level interrupt
instead of edge interrupt. Let's not change the others as I've only seen
this on omap4 and 5, probably because the other SoCs don't have l4per idle
independent of the CPUs.

Fixes: 572cf7d7 ("ARM: dts: Improve omap l4per idling with wlcore edge sensitive interrupt")
Depends-on: e6818d29 ("gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup")
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Eyal Reizer <eyalr@ti.com>
Cc: Guy Mishol <guym@ti.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

According to
Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt,
i2c-mux-idle-disconnect is a property of a parent node since it
pertains to the mux/switch as a whole, so move it there and drop all
of the concurrences in child nodes.

Fixes: d0317731 ("ARM: dts: Adds device tree file for McGill's IceBoard, based on TI AM3874")
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Benoît Cousson <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: linux-omap@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Graeme Smecher <gsmecher@threespeedlogic.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The clkctrl code searches for the parent clockdomain based on the name
of the CM provider node. The introduction of SGX node for omap5 made
the node name for the gpu_cm to be clock-controller. There is no
clockdomain named like this, so the lookup fails. Fix by changing
the node name properly.

Fixes: 394534cb ("ARM: dts: Configure sgx for omap5")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The TWL4030 used on the Logit PD Torpedo SOM does not have the
keypad pins routed.  This patch disables the twl_keypad driver
to remove some splat during boot:

twl4030_keypad 48070000.i2c:twl@48:keypad: missing or malformed property linux,keymap: -22
twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -22
Signed-off-by: Adam Ford <aford173@gmail.com>
[tony@atomide.com: removed error time stamps]
Signed-off-by: Tony Lindgren <tony@atomide.com>

The old omapdrm panels got removed for v5.4 in favor of generic panels,
and the Kconfig options changed. Let's update omap2plus_defconfig
accordingly so the same panels are still enabled.

Cc: Jyri Sarha <jsarha@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Pull btrfs fixes from David Sterba:
 "A bunch of fixes that accumulated in recent weeks, mostly material for
  stable.

  Summary:

   - fix for regression from 5.3 that prevents to use balance convert
     with single profile

   - qgroup fixes: rescan race, accounting leak with multiple writers,
     potential leak after io failure recovery

   - fix for use after free in relocation (reported by KASAN)

   - other error handling fixups"

* tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls
  btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space
  btrfs: Fix a regression which we can't convert to SINGLE profile
  btrfs: relocation: fix use-after-free on dead relocation roots
  Btrfs: fix race setting up and completing qgroup rescan workers
  Btrfs: fix missing error return if writeback for extent buffer never started
  btrfs: adjust dirty_metadata_bytes after writeback failure of extent buffer
  Btrfs: fix selftests failure due to uninitialized i_mode in test inodes

Pull csky updates from Guo Ren:
 "This round of csky subsystem just some fixups:

   - Fix mb() synchronization problem

   - Fix dma_alloc_coherent with PAGE_SO attribute

   - Fix cache_op failed when cross memory ZONEs

   - Optimize arch_sync_dma_for_cpu/device with dma_inv_range

   - Fix ioremap function losing

   - Fix arch_get_unmapped_area() implementation

   - Fix defer cache flush for 610

   - Support kernel non-aligned access

   - Fix 610 vipt cache flush mechanism

   - Fix add zero_fp fixup perf backtrace panic

   - Move static keyword to the front of declaration

   - Fix csky_pmu.max_period assignment

   - Use generic free_initrd_mem()

   - entry: Remove unneeded need_resched() loop"

* tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux:
  csky: Move static keyword to the front of declaration
  csky: entry: Remove unneeded need_resched() loop
  csky: Fixup csky_pmu.max_period assignment
  csky: Fixup add zero_fp fixup perf backtrace panic
  csky: Use generic free_initrd_mem()
  csky: Fixup 610 vipt cache flush mechanism
  csky: Support kernel non-aligned access
  csky: Fixup defer cache flush for 610
  csky: Fixup arch_get_unmapped_area() implementation
  csky: Fixup ioremap function losing
  csky: Optimize arch_sync_dma_for_cpu/device with dma_inv_range
  csky/dma: Fixup cache_op failed when cross memory ZONEs
  csky: Fixup dma_alloc_coherent with PAGE_SO attribute
  csky: Fixup mb() synchronization problem

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes that have trickled in through the merge window:

   - Video fixes for OMAP due to panel-dpi driver removal

   - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7

   - Fixing arch version on ASpeed ast2500

   - Two fixes for reset handling on ARM SCMI"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: aspeed: ast2500 is ARMv6K
  reset: reset-scmi: add missing handle initialisation
  firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks

Set memory bandwidth limit to filter out resolutions above 720p@60Hz to
avoid underflow errors due to the bandwidth needs of higher resolutions.

am43xx can not provide enough bandwidth to DISPC to correctly handle
'high' resolutions.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Pull tracing fixes from Steven Rostedt:
 "A few more tracing fixes:

   - Fix a buffer overflow by checking nr_args correctly in probes

   - Fix a warning that is reported by clang

   - Fix a possible memory leak in error path of filter processing

   - Fix the selftest that checks for failures, but wasn't failing

   - Minor clean up on call site output of a memory trace event"

* tag 'trace-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  selftests/ftrace: Fix same probe error test
  mm, tracing: Print symbol name for call_site in trace events
  tracing: Have error path in predicate_parse() free its allocated memory
  tracing: Fix clang -Wint-in-bool-context warnings in IF_ASSIGN macro
  tracing/probe: Fix to check the difference of nr_args before adding probe

Pull more MMC updates from Ulf Hansson:
 "A couple more updates/fixes for MMC:

   - sdhci-pci: Add Genesys Logic GL975x support

   - sdhci-tegra: Recover loss in throughput for DMA

   - sdhci-of-esdhc: Fix DMA bug"

* tag 'mmc-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: host: sdhci-pci: Add Genesys Logic GL975x support
  mmc: tegra: Implement ->set_dma_mask()
  mmc: sdhci: Let drivers define their DMA mask
  mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence
  mmc: sdhci: improve ADMA error reporting

Move the static keyword to the front of declaration of
csky_pmu_of_device_ids, and resolve the following compiler
warning that can be seen when building with warnings
enabled (W=1):

arch/csky/kernel/perf_event.c:1340:1: warning:
  ‘static’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Guo Ren <guoren@kernel.org>

Since the enabling and disabling of IRQs within preempt_schedule_irq()
is contained in a need_resched() loop, we don't need the outer arch
code loop.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Guo Ren <guoren@kernel.org>