From: Sam Ravnborg <sam@ravnborg.org>

'enable' is not documented in Documentation/kbuild/kconfig-language.txt So
remove usage in the only Kconfig file in the kernel tree where it was used.

From: Sam Ravnborg <sam@ravnborg.org>

- Use keyword select in relevant warning

- Include more information in warnings related to select

- Move part of error-checking to a sepearate function

- Added helpers used when issuing warnings - makes code simpler

- Wrapped most edited lines at column 80

From: jbarnes@sgi.com (Jesse Barnes)

Here's the patch to add the new _relaxed variants for PIO read accesses.
It's been ack'd by gregkh and Grant Grundler, and I think it's ready to
go.

PCI ordering rules also guarantee that PIO read responses arrive after any
outstanding DMA writes on that bus, since for some devices the result of a
readb() call may signal to the driver that a DMA transaction is complete.  In
many cases, however, the driver may want to indicate that the next readb()
call has no relation to any previous DMA writes performed by the device.  The
driver can use the readb_relaxed() for these cases, although only some
platforms will honor the relaxed semantics.

From: Anton Blanchard <anton@samba.org>

I made a few changes, basically the burst parameter is now in units of
messages, makes much more sense than the old net ratelimit one.

I also screwed up adding a sysctl_jiffies strategy for the burst parameter.

From: "Randy.Dunlap" <rddunlap@osdl.org>
      Eugene TEO <eugeneteo@eugeneteo.net>

From: Joe Korty <joe.korty@ccur.com>

1) the version in 2.6.1 is broken, doesn't work on 64bit big endian
   machines at all.  This needed fixing.  I thought it best to fix by
   rewriting the printer/parser with an algorithm that is naturally endian &
   sizeof(long) resistant.

2) I wanted all digits to print, eg, 0000ffff,00000004 not ffff,4.

3) I wanted exactly NR_CPUS bits to print (or whatever the bitmap size is
   in bits, and not have what is displayed rounded up to the nearest full
   byte, as the current version did.

4) The bitmap printer and parser should be part of bitmap.[ch] with syntax
   and semantics to match.  The original lib/mask.c versions did not
   recognize this commonality.

From: Andi Kleen <ak@muc.de>

Fix all the x86-64 warnings with gcc 3.5 and make it compile again.

	++nmi_count(cpu);

arch/i386/kernel/traps.c: In function `do_nmi':
arch/i386/kernel/traps.c:552: error: invalid lvalue in increment

and

include/linux/netdevice.h: In function `__netif_rx_schedule':
include/linux/netdevice.h:818: error: invalid lvalue in assignment
include/linux/netdevice.h: In function `netif_rx_reschedule':
include/linux/netdevice.h:842: error: invalid lvalue in assignment


This fix will probably reintroduce unused variable warnings...

drivers/video/vgastate.c: In function `save_vga':
drivers/video/vgastate.c:368: error: invalid lvalue in assignment

drivers/video/cfbimgblt.c: In function `color_imageblit':
drivers/video/cfbimgblt.c:140: error: invalid lvalue in assignment
drivers/video/cfbimgblt.c: In function `slow_imageblit':
drivers/video/cfbimgblt.c:206: error: invalid lvalue in assignment

drivers/video/riva/fbdev.c: In function `rivafb_load_cursor_image':
drivers/video/riva/fbdev.c:498: error: invalid lvalue in increment
drivers/video/riva/fbdev.c:499: error: invalid lvalue in increment
drivers/video/riva/fbdev.c: In function `rivafb_imageblit':
drivers/video/riva/fbdev.c:1440: error: invalid lvalue in increment
drivers/video/riva/fbdev.c:1449: error: invalid lvalue in increment

drivers/video/console/fbcon.c: In function `fbcon_set_font':
drivers/video/console/fbcon.c:2000: error: invalid lvalue in decrement

drivers/scsi/gdth.c:267:10: warning: extra tokens at end of #ident directive

drivers/scsi/atp870u.c: In function `send_s870':                                drivers/scsi/atp870u.c:706: error: invalid lvalue in assignment
drivers/scsi/atp870u.c:707: error: invalid lvalue in assignment
drivers/scsi/atp870u.c:708: error: invalid lvalue in assignment
drivers/scsi/atp870u.c:713: error: invalid lvalue in assignment                 drivers/scsi/atp870u.c:714: error: invalid lvalue in assignment
drivers/scsi/atp870u.c:715: error: invalid lvalue in assignment
drivers/scsi/atp870u.c:718: error: invalid lvalue in assignment
drivers/scsi/atp870u.c:727: error: invalid lvalue in assignment                 drivers/scsi/atp870u.c:728: error: invalid lvalue in assignment
drivers/scsi/atp870u.c:729: error: invalid lvalue in assignment
drivers/scsi/atp870u.c:734: error: invalid lvalue in assignment                 drivers/scsi/atp870u.c:735: error: invalid lvalue in assignment
drivers/scsi/atp870u.c:736: error: invalid lvalue in assignment

drivers/scsi/advansys.c: In function `advansys_reset':
drivers/scsi/advansys.c:6022: error: invalid lvalue in assignment
drivers/scsi/advansys.c:6045: error: invalid lvalue in assignment
drivers/scsi/advansys.c: In function `advansys_interrupt':
drivers/scsi/advansys.c:6314: error: invalid lvalue in assignment
drivers/scsi/advansys.c: In function `asc_scsi_done_list':
drivers/scsi/advansys.c:6386: error: invalid lvalue in assignment
drivers/scsi/advansys.c: In function `asc_enqueue':
drivers/scsi/advansys.c:7437: error: invalid lvalue in assignment
drivers/scsi/advansys.c:7445: error: invalid lvalue in assignment
drivers/scsi/advansys.c:7448: error: invalid lvalue in assignment
drivers/scsi/advansys.c: In function `asc_dequeue_list':
drivers/scsi/advansys.c:7569: error: invalid lvalue in assignment
drivers/scsi/advansys.c: In function `asc_rmqueue':
drivers/scsi/advansys.c:7647: error: invalid lvalue in assignment
drivers/scsi/advansys.c:7648: error: invalid lvalue in assignment

In file included from drivers/scsi/53c700.c:140:
drivers/scsi/53c700.h: In function `NCR_700_set_SXFER':
drivers/scsi/53c700.h:106: error: invalid lvalue in assignment
drivers/scsi/53c700.h:107: error: invalid lvalue in assignment
drivers/scsi/53c700.h: In function `NCR_700_set_depth':
drivers/scsi/53c700.h:116: error: invalid lvalue in assignment
drivers/scsi/53c700.h:117: error: invalid lvalue in assignment
drivers/scsi/53c700.h: In function `NCR_700_set_flag':
drivers/scsi/53c700.h:137: error: invalid lvalue in assignment
drivers/scsi/53c700.h: In function `NCR_700_clear_flag':
drivers/scsi/53c700.h:142: error: invalid lvalue in assignment

drivers/pnp/pnpbios/core.c:438: warning: use of cast expressions as lvalues is deprecated

drivers/media/video/mxb.c: In function `mxb_probe':
drivers/media/video/mxb.c:264: error: invalid lvalue in assignment

include/pcmcia/mem_op.h: In function `copy_from_pc':
include/pcmcia/mem_op.h:85: error: invalid lvalue in assignment
include/pcmcia/mem_op.h:85: error: invalid lvalue in assignment
include/pcmcia/mem_op.h: In function `copy_to_pc':
include/pcmcia/mem_op.h:97: error: invalid lvalue in assignment
include/pcmcia/mem_op.h:97: error: invalid lvalue in assignment
include/pcmcia/mem_op.h: In function `copy_pc_to_user':
include/pcmcia/mem_op.h:109: error: invalid lvalue in assignment
include/pcmcia/mem_op.h:109: error: invalid lvalue in assignment
include/pcmcia/mem_op.h: In function `copy_user_to_pc':
include/pcmcia/mem_op.h:124: error: invalid lvalue in assignment
include/pcmcia/mem_op.h:124: error: invalid lvalue in assignment

drivers/media/dvb/frontends/ves1820.c: In function `ves1820_setup_reg0':
drivers/media/dvb/frontends/ves1820.c:244: error: invalid lvalue in assignment
drivers/media/dvb/frontends/ves1820.c:244: error: invalid lvalue in assignment
drivers/media/dvb/frontends/ves1820.c: In function `ves1820_attach':
drivers/media/dvb/frontends/ves1820.c:541: error: invalid lvalue in assignment
drivers/media/dvb/frontends/ves1820.c:541: error: invalid lvalue in assignment
drivers/media/dvb/frontends/ves1820.c:544: error: invalid lvalue in assignment
drivers/media/dvb/frontends/ves1820.c:544: error: invalid lvalue in assignment
drivers/media/dvb/frontends/ves1820.c:545: error: invalid lvalue in assignment
drivers/media/dvb/frontends/ves1820.c:545: error: invalid lvalue in assignment
drivers/media/dvb/frontends/ves1820.c:546: error: invalid lvalue in assignment
drivers/media/dvb/frontends/ves1820.c:546: error: invalid lvalue in assignment
drivers/media/dvb/frontends/ves1820.c:547: error: invalid lvalue in assignment
drivers/media/dvb/frontends/ves1820.c:547: error: invalid lvalue in assignment

drivers/mtd/chips/cfi_cmdset_0020.c:545: error: invalid lvalue in increment
drivers/mtd/chips/cfi_cmdset_0020.c:547: error: invalid lvalue in increment
drivers/mtd/chips/cfi_cmdset_0020.c:549: error: invalid lvalue in increment

drivers/md/raid6x86.h:1:10: warning: extra tokens at end of #ident directive

drivers/ide/pci/sc1200.c: In function `sc1200_suspend':
drivers/ide/pci/sc1200.c:423: error: invalid lvalue in assignment

drivers/char/drm/radeon_state.c: In function `radeon_cp_dispatch_texture':
drivers/char/drm/radeon_state.c:1411: error: invalid lvalue in assignment

drivers/i2c/chips/it87.c:130: warning: conflicting types for built-in function 'log2'

net/atm/common.c: In function `vcc_create':
net/atm/common.c:151: error: invalid lvalue in assignment

drivers/atm/he.c: In function `he_init_one':
drivers/atm/he.c:383: error: invalid lvalue in assignment
drivers/atm/he.c: In function `he_open':
drivers/atm/he.c:2364: error: invalid lvalue in assignment

drivers/atm/idt77105.c: In function `idt77105_start':
drivers/atm/idt77105.c:268: error: invalid lvalue in assignment
drivers/atm/idt77105.c: In function `idt77105_stop':
drivers/atm/idt77105.c:346: error: invalid lvalue in assignment

drivers/atm/eni.c: In function `eni_close':
drivers/atm/eni.c:1878: error: invalid lvalue in assignment
drivers/atm/eni.c: In function `eni_open':
drivers/atm/eni.c:1894: error: invalid lvalue in assignment
drivers/atm/eni.c:1905: error: invalid lvalue in assignment
drivers/atm/eni.c: In function `eni_init_one':
drivers/atm/eni.c:2233: error: invalid lvalue in assignment

fs/ncpfs/ncplib_kernel.h:164: sorry, unimplemented: inlining failed in call to 'ncp_strnicmp': function body not available

drivers/atm/fore200e.c: In function `fore200e_open':
drivers/atm/fore200e.c:1420: error: invalid lvalue in assignment
drivers/atm/fore200e.c: In function `fore200e_register':
drivers/atm/fore200e.c:2485: error: invalid lvalue in assignment

drivers/atm/suni.c: In function `suni_start':
drivers/atm/suni.c:233: error: invalid lvalue in assignment

drivers/atm/iphase.c: In function `open_tx':
drivers/atm/iphase.c:1757: error: invalid lvalue in assignment
drivers/atm/iphase.c: In function `ia_close':
drivers/atm/iphase.c:2674: error: invalid lvalue in assignment
drivers/atm/iphase.c: In function `ia_open':
drivers/atm/iphase.c:2687: error: invalid lvalue in assignment
drivers/atm/iphase.c:2703: error: invalid lvalue in assignment
drivers/atm/iphase.c: In function `ia_init_one':
drivers/atm/iphase.c:3199: error: invalid lvalue in assignment

fs/intermezzo/dir.c: In function `presto_prep':
fs/intermezzo/intermezzo_fs.h:414: sorry, unimplemented: inlining failed in call to 'presto_is_read_only': function body not available

fs/intermezzo/presto.c: In function `izo_mark_cache':
fs/intermezzo/presto.c:341: error: invalid lvalue in assignment
fs/intermezzo/presto.c:342: error: invalid lvalue in assignment

drivers/atm/uPD98402.c: In function `uPD98402_start':
drivers/atm/uPD98402.c:214: error: invalid lvalue in assignment

fs/hfs/file_hdr.c: In function `dup_layout':
fs/hfs/file_hdr.c:246: error: invalid lvalue in assignment

fs/freevxfs/vxfs.h:33:10: warning: extra tokens at end of #ident directive
fs/freevxfs/vxfs_extern.h:75: sorry, unimplemented: inlining failed in call to 'vxfs_put_page': function body not available

drivers/atm/zatm.c: In function `zatm_close':
drivers/atm/zatm.c:1371: error: invalid lvalue in assignment
drivers/atm/zatm.c: In function `zatm_open':
drivers/atm/zatm.c:1386: error: invalid lvalue in assignment
drivers/atm/zatm.c:1398: error: invalid lvalue in assignment
drivers/atm/zatm.c: In function `zatm_module_init':
drivers/atm/zatm.c:1600: error: invalid lvalue in assignment

From: Tim Cambrant <tim@cambrant.com>

Fix inline decls in fsfilter.h, ntfs.h

arch/i386/boot/compressed/misc.c:107: warning: conflicting types for built-in function 'puts'