Skip to content

L
linux
Switch branch/tag
  1. 02 Oct, 2016 24 commits
    • Paul Mackerras's avatar
      powerpc/mm: Don't alias user region to other regions below PAGE_OFFSET · 7b6ea253
      Paul Mackerras authored 
      [ Upstream commit f077aaf0 ]

In commit c60ac569 ("powerpc: Update kernel VSID range", 2013-03-13)
we lost a check on the region number (the top four bits of the effective
address) for addresses below PAGE_OFFSET.  That commit replaced a check
that the top 18 bits were all zero with a check that bits 46 - 59 were
zero (performed for all addresses, not just user addresses).

This means that userspace can access an address like 0x1000_0xxx_xxxx_xxxx
and we will insert a valid SLB entry for it.  The VSID used will be the
same as if the top 4 bits were 0, but the page size will be some random
value obtained by indexing beyond the end of the mm_ctx_high_slices_psize
array in the paca.  If that page size is the same as would be used for
region 0, then userspace just has an alias of the region 0 space.  If the
page size is different, then no HPTE will be found for the access, and
the process will get a SIGSEGV (since hash_page_mm() will refuse to create
a HPTE for the bogus address).

The access beyond the end of the mm_ctx_high_slices_psize can be at most
5.5MB past the array, and so will be in RAM somewhere.  Since the access
is a load performed in real mode, it won't fault or crash the kernel.
At most this bug could perhaps leak a little bit of information about
blocks of 32 bytes of memory located at offsets of i * 512kB past the
paca->mm_ctx_high_slices_psize array, for 1 <= i <= 11.

Fixes: c60ac569 ("powerpc: Update kernel VSID range")
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
Reviewed-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      7b6ea253
    • Ard Biesheuvel's avatar
      crypto: cryptd - initialize child shash_desc on import · b8e51107
      Ard Biesheuvel authored 
      [ Upstream commit 0bd22235 ]

When calling .import() on a cryptd ahash_request, the structure members
that describe the child transform in the shash_desc need to be initialized
like they are when calling .init()

Cc: stable@vger.kernel.org
Signed-off-by: default avatarArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      b8e51107
    • Wei Yongjun's avatar
      ipv6: addrconf: fix dev refcont leak when DAD failed · 81e6db1b
      Wei Yongjun authored 
      [ Upstream commit 751eb6b6 ]

In general, when DAD detected IPv6 duplicate address, ifp->state
will be set to INET6_IFADDR_STATE_ERRDAD and DAD is stopped by a
delayed work, the call tree should be like this:

ndisc_recv_ns
  -> addrconf_dad_failure        <- missing ifp put
     -> addrconf_mod_dad_work
       -> schedule addrconf_dad_work()
         -> addrconf_dad_stop()  <- missing ifp hold before call it

addrconf_dad_failure() called with ifp refcont holding but not put.
addrconf_dad_work() call addrconf_dad_stop() without extra holding
refcount. This will not cause any issue normally.

But the race between addrconf_dad_failure() and addrconf_dad_work()
may cause ifp refcount leak and netdevice can not be unregister,
dmesg show the following messages:

IPv6: eth0: IPv6 duplicate address fe80::XX:XXXX:XXXX:XX detected!
...
unregister_netdevice: waiting for eth0 to become free. Usage count = 1

Cc: stable@vger.kernel.org
Fixes: c15b1cca ("ipv6: move DAD and addrconf_verify processing
to workqueue")
Signed-off-by: default avatarWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      81e6db1b
    • Chris Mason's avatar
      Btrfs: remove root_log_ctx from ctx list before btrfs_sync_log returns · 12ebbc22
      Chris Mason authored 
      [ Upstream commit cbd60aa7 ]

We use a btrfs_log_ctx structure to pass information into the
tree log commit, and get error values out.  It gets added to a per
log-transaction list which we walk when things go bad.

Commit d1433deb added an optimization to skip waiting for the log
commit, but didn't take root_log_ctx out of the list.  This
patch makes sure we remove things before exiting.
Signed-off-by: default avatarChris Mason <clm@fb.com>
Fixes: d1433deb
cc: stable@vger.kernel.org # 3.15+
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      12ebbc22
    • Jan Leupold's avatar
      drm: atmel-hlcdc: Fix vertical scaling · c2aca6bb
      Jan Leupold authored 
      [ Upstream commit d31ed3f0 ]

The code is applying the same scaling for the X and Y components,
thus making the scaling feature only functional when both components
have the same scaling factor.

Do the s/_w/_h/ replacement where appropriate to fix vertical scaling.
Signed-off-by: default avatarJan Leupold <leupold@rsi-elektrotechnik.de>
Fixes: 1a396789 ("drm: add Atmel HLCDC Display Controller support")
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      c2aca6bb
    • Miklos Szeredi's avatar
      ovl: fix workdir creation · 12c68a9c
      Miklos Szeredi authored 
      [ Upstream commit e1ff3dd1 ]

Workdir creation fails in latest kernel.

Fix by allowing EOPNOTSUPP as a valid return value from
vfs_removexattr(XATTR_NAME_POSIX_ACL_*).  Upper filesystem may not support
ACL and still be perfectly able to support overlayfs.
Reported-by: default avatarMartin Ziegler <ziegler@uni-freiburg.de>
Signed-off-by: default avatarMiklos Szeredi <mszeredi@redhat.com>
Fixes: c11b9fdd ("ovl: remove posix_acl_default from workdir")
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      12c68a9c
    • Yoshihiro Shimoda's avatar
      usb: renesas_usbhs: fix clearing the {BRDY,BEMP}STS condition · 8af2ce07
      Yoshihiro Shimoda authored 
      [ Upstream commit 519d8bd4 ]

The previous driver is possible to stop the transfer wrongly.
For example:
 1) An interrupt happens, but not BRDY interruption.
 2) Read INTSTS0. And than state->intsts0 is not set to BRDY.
 3) BRDY is set to 1 here.
 4) Read BRDYSTS.
 5) Clear the BRDYSTS. And then. the BRDY is cleared wrongly.

Remarks:
 - The INTSTS0.BRDY is read only.
  - If any bits of BRDYSTS are set to 1, the BRDY is set to 1.
  - If BRDYSTS is 0, the BRDY is set to 0.

So, this patch adds condition to avoid such situation. (And about
NRDYSTS, this is not used for now. But, avoiding any side effects,
this patch doesn't touch it.)

Fixes: d5c6a1e0 ("usb: renesas_usbhs: fixup interrupt status clear method")
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: default avatarYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: default avatarFelipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      8af2ce07
    • Balbir Singh's avatar
      sched/core: Fix a race between try_to_wake_up() and a woken up task · 431d09f2
      Balbir Singh authored 
      [ Upstream commit 135e8c92 ]

The origin of the issue I've seen is related to
a missing memory barrier between check for task->state and
the check for task->on_rq.

The task being woken up is already awake from a schedule()
and is doing the following:

	do {
		schedule()
		set_current_state(TASK_(UN)INTERRUPTIBLE);
	} while (!cond);

The waker, actually gets stuck doing the following in
try_to_wake_up():

	while (p->on_cpu)
		cpu_relax();

Analysis:

The instance I've seen involves the following race:

 CPU1					CPU2

 while () {
   if (cond)
     break;
   do {
     schedule();
     set_current_state(TASK_UN..)
   } while (!cond);
					wakeup_routine()
					  spin_lock_irqsave(wait_lock)
   raw_spin_lock_irqsave(wait_lock)	  wake_up_process()
 }					  try_to_wake_up()
 set_current_state(TASK_RUNNING);	  ..
 list_del(&waiter.list);

CPU2 wakes up CPU1, but before it can get the wait_lock and set
current state to TASK_RUNNING the following occurs:

 CPU3
 wakeup_routine()
 raw_spin_lock_irqsave(wait_lock)
 if (!list_empty)
   wake_up_process()
   try_to_wake_up()
   raw_spin_lock_irqsave(p->pi_lock)
   ..
   if (p->on_rq && ttwu_wakeup())
   ..
   while (p->on_cpu)
     cpu_relax()
   ..

CPU3 tries to wake up the task on CPU1 again since it finds
it on the wait_queue, CPU1 is spinning on wait_lock, but immediately
after CPU2, CPU3 got it.

CPU3 checks the state of p on CPU1, it is TASK_UNINTERRUPTIBLE and
the task is spinning on the wait_lock. Interestingly since p->on_rq
is checked under pi_lock, I've noticed that try_to_wake_up() finds
p->on_rq to be 0. This was the most confusing bit of the analysis,
but p->on_rq is changed under runqueue lock, rq_lock, the p->on_rq
check is not reliable without this fix IMHO. The race is visible
(based on the analysis) only when ttwu_queue() does a remote wakeup
via ttwu_queue_remote. In which case the p->on_rq change is not
done uder the pi_lock.

The result is that after a while the entire system locks up on
the raw_spin_irqlock_save(wait_lock) and the holder spins infintely

Reproduction of the issue:

The issue can be reproduced after a long run on my system with 80
threads and having to tweak available memory to very low and running
memory stress-ng mmapfork test. It usually takes a long time to
reproduce. I am trying to work on a test case that can reproduce
the issue faster, but thats work in progress. I am still testing the
changes on my still in a loop and the tests seem OK thus far.

Big thanks to Benjamin and Nick for helping debug this as well.
Ben helped catch the missing barrier, Nick caught every missing
bit in my theory.
Signed-off-by: default avatarBalbir Singh <bsingharora@gmail.com>
[ Updated comment to clarify matching barriers. Many
  architectures do not have a full barrier in switch_to()
  so that cannot be relied upon. ]
Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <nicholas.piggin@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/e02cce7b-d9ca-1ad0-7a61-ea97c7582b37@gmail.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      431d09f2
    • Linus Walleij's avatar
      iio: accel: kxsd9: Fix scaling bug · 1ea35b9f
      Linus Walleij authored 
      [ Upstream commit 307fe9dd ]

All the scaling of the KXSD9 involves multiplication with a
fraction number < 1.

However the scaling value returned from IIO_INFO_SCALE was
unpredictable as only the micros of the value was assigned, and
not the integer part, resulting in scaling like this:

$cat in_accel_scale
-1057462640.011978

Fix this by assigning zero to the integer part.

Cc: stable@vger.kernel.org
Tested-by: default avatarJonathan Cameron <jic23@kernel.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      1ea35b9f
    • Vegard Nossum's avatar
      ALSA: timer: fix NULL pointer dereference in read()/ioctl() race · 193eb8f1
      Vegard Nossum authored 
      [ Upstream commit 11749e08 ]

I got this with syzkaller:

    ==================================================================
    BUG: KASAN: null-ptr-deref on address 0000000000000020
    Read of size 32 by task syz-executor/22519
    CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ #169
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2
    014
     0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90
     ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80
     ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68
    Call Trace:
     [<ffffffff81f9f141>] dump_stack+0x83/0xb2
     [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0
     [<ffffffff8161ff74>] kasan_report+0x34/0x40
     [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790
     [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0
     [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20
     [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790
     [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0
     [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250
     [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0
     [<ffffffff8127c278>] ? do_group_exit+0x108/0x330
     [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0
     [<ffffffff81674dfe>] __vfs_read+0x10e/0x550
     [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0
     [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50
     [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60
     [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190
     [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380
     [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0
     [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0
     [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0
     [<ffffffff81675355>] vfs_read+0x115/0x330
     [<ffffffff81676371>] SyS_read+0xd1/0x1a0
     [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0
     [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20
     [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0
     [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0
     [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0
     [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0
     [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25
    ==================================================================

There are a couple of problems that I can see:

 - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets
   tu->queue/tu->tqueue to NULL on memory allocation failure, so read()
   would get a NULL pointer dereference like the above splat

 - the same ioctl() can free tu->queue/to->tqueue which means read()
   could potentially see (and dereference) the freed pointer

We can fix both by taking the ioctl_lock mutex when dereferencing
->queue/->tqueue, since that's always held over all the ioctl() code.

Just looking at the code I find it likely that there are more problems
here such as tu->qhead pointing outside the buffer if the size is
changed concurrently using SNDRV_TIMER_IOCTL_PARAMS.
Signed-off-by: default avatarVegard Nossum <vegard.nossum@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      193eb8f1
    • Takashi Sakamoto's avatar
      ALSA: fireworks: accessing to user space outside spinlock · 854a40fa
      Takashi Sakamoto authored 
      [ Upstream commit 6b1ca4bc ]

In hwdep interface of fireworks driver, accessing to user space is in a
critical section with disabled local interrupt. Depending on architecture,
accessing to user space can cause page fault exception. Then local
processor stores machine status and handles the synchronous event. A
handler corresponding to the event can call task scheduler to wait for
preparing pages. In a case of usage of single core processor, the state to
disable local interrupt is worse because it don't handle usual interrupts
from hardware.

This commit fixes this bug, performing the accessing outside spinlock. This
commit also gives up counting the number of queued response messages to
simplify ring-buffer management.
Reported-by: default avatarVaishali Thakkar <vaishali.thakkar@oracle.com>
Cc: stable@vger.kernel.org
Fixes: 555e8a8f('ALSA: fireworks: Add command/response functionality into hwdep interface')
Signed-off-by: default avatarTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      854a40fa
    • Anson Huang's avatar
      ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx · 82ae68a8
      Anson Huang authored 
      [ Upstream commit 8aade778 ]

i.MX6SX has bypass PMIC ready function, as this function
is normally NOT enabled on the board design, so we need
to bypass the PMIC ready pin check during DSM mode resume
flow, otherwise, the internal DSM resume logic will be
waiting for this signal to be ready forever and cause
resume fail.
Signed-off-by: default avatarAnson Huang <Anson.Huang@nxp.com>
Fixes: ff843d62 ("ARM: imx: add suspend support for i.mx6sx")
Cc: <stable@vger.kernel.org>
Tested-by: default avatarPeter Chen <peter.chen@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      82ae68a8
    • Kai-Heng Feng's avatar
      ALSA: hda - Enable subwoofer on Dell Inspiron 7559 · 6558ce65
      Kai-Heng Feng authored 
      [ Upstream commit fd06c77e ]

The subwoofer on Inspiron 7559 was disabled originally.
Applying a pin fixup to node 0x1b can enable it and make it work.

Old pin: 0x411111f0
New pin: 0x90170151
Signed-off-by: default avatarKai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      6558ce65
    • Ken Lin's avatar
      ALSA: usb-audio: Add sample rate inquiry quirk for B850V3 CP2114 · 7b7cc699
      Ken Lin authored 
      [ Upstream commit 83d9956b ]

Avoid getting sample rate on B850V3 CP2114 as it is unsupported and
causes noisy "current rate is different from the runtime rate" messages
when playback starts.
Signed-off-by: default avatarKen Lin <ken.lin@advantech.com.tw>
Signed-off-by: default avatarAkshay Bhat <akshay.bhat@timesys.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      7b7cc699
    • Vegard Nossum's avatar
      ALSA: timer: fix NULL pointer dereference on memory allocation failure · 6138d59d
      Vegard Nossum authored 
      [ Upstream commit 8ddc0563 ]

I hit this with syzkaller:

    kasan: CONFIG_KASAN_INLINE enabled
    kasan: GPF could be caused by NULL-ptr deref or user memory access
    general protection fault: 0000 [#1] PREEMPT SMP KASAN
    CPU: 0 PID: 1327 Comm: a.out Not tainted 4.8.0-rc2+ #190
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
    task: ffff88011278d600 task.stack: ffff8801120c0000
    RIP: 0010:[<ffffffff82c8ba07>]  [<ffffffff82c8ba07>] snd_hrtimer_start+0x77/0x100
    RSP: 0018:ffff8801120c7a60  EFLAGS: 00010006
    RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000007
    RDX: 0000000000000009 RSI: 1ffff10023483091 RDI: 0000000000000048
    RBP: ffff8801120c7a78 R08: ffff88011a5cf768 R09: ffff88011a5ba790
    R10: 0000000000000002 R11: ffffed00234b9ef1 R12: ffff880114843980
    R13: ffffffff84213c00 R14: ffff880114843ab0 R15: 0000000000000286
    FS:  00007f72958f3700(0000) GS:ffff88011aa00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000603001 CR3: 00000001126ab000 CR4: 00000000000006f0
    Stack:
     ffff880114843980 ffff880111eb2dc0 ffff880114843a34 ffff8801120c7ad0
     ffffffff82c81ab1 0000000000000000 ffffffff842138e0 0000000100000000
     ffff880111eb2dd0 ffff880111eb2dc0 0000000000000001 ffff880111eb2dc0
    Call Trace:
     [<ffffffff82c81ab1>] snd_timer_start1+0x331/0x670
     [<ffffffff82c85bfd>] snd_timer_start+0x5d/0xa0
     [<ffffffff82c8795e>] snd_timer_user_ioctl+0x88e/0x2830
     [<ffffffff8159f3a0>] ? __follow_pte.isra.49+0x430/0x430
     [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80
     [<ffffffff815a26fa>] ? do_wp_page+0x3aa/0x1c90
     [<ffffffff8132762f>] ? put_prev_entity+0x108f/0x21a0
     [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80
     [<ffffffff816b0733>] do_vfs_ioctl+0x193/0x1050
     [<ffffffff813510af>] ? cpuacct_account_field+0x12f/0x1a0
     [<ffffffff816b05a0>] ? ioctl_preallocate+0x200/0x200
     [<ffffffff81002f2f>] ? syscall_trace_enter+0x3cf/0xdb0
     [<ffffffff815045ba>] ? __context_tracking_exit.part.4+0x9a/0x1e0
     [<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190
     [<ffffffff82001a97>] ? check_preemption_disabled+0x37/0x1e0
     [<ffffffff81d93889>] ? security_file_ioctl+0x89/0xb0
     [<ffffffff816b167f>] SyS_ioctl+0x8f/0xc0
     [<ffffffff816b15f0>] ? do_vfs_ioctl+0x1050/0x1050
     [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0
     [<ffffffff83c32b2a>] entry_SYSCALL64_slow_path+0x25/0x25
    Code: c7 c7 c4 b9 c8 82 48 89 d9 4c 89 ee e8 63 88 7f fe e8 7e 46 7b fe 48 8d 7b 48 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 04 84 c0 7e 65 80 7b 48 00 74 0e e8 52 46
    RIP  [<ffffffff82c8ba07>] snd_hrtimer_start+0x77/0x100
     RSP <ffff8801120c7a60>
    ---[ end trace 5955b08db7f2b029 ]---

This can happen if snd_hrtimer_open() fails to allocate memory and
returns an error, which is currently not checked by snd_timer_open():

    ioctl(SNDRV_TIMER_IOCTL_SELECT)
     - snd_timer_user_tselect()
	- snd_timer_close()
	   - snd_hrtimer_close()
	      - (struct snd_timer *) t->private_data = NULL
        - snd_timer_open()
           - snd_hrtimer_open()
              - kzalloc() fails; t->private_data is still NULL

    ioctl(SNDRV_TIMER_IOCTL_START)
     - snd_timer_user_start()
	- snd_timer_start()
	   - snd_timer_start1()
	      - snd_hrtimer_start()
		- t->private_data == NULL // boom
Signed-off-by: default avatarVegard Nossum <vegard.nossum@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      6138d59d
    • Vegard Nossum's avatar
      ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUE · 2350481b
      Vegard Nossum authored 
      [ Upstream commit 6b760bb2 ]

I got this:

    divide error: 0000 [#1] PREEMPT SMP KASAN
    CPU: 1 PID: 1327 Comm: a.out Not tainted 4.8.0-rc2+ #189
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
    task: ffff8801120a9580 task.stack: ffff8801120b0000
    RIP: 0010:[<ffffffff82c8bd9a>]  [<ffffffff82c8bd9a>] snd_hrtimer_callback+0x1da/0x3f0
    RSP: 0018:ffff88011aa87da8  EFLAGS: 00010006
    RAX: 0000000000004f76 RBX: ffff880112655e88 RCX: 0000000000000000
    RDX: 0000000000000000 RSI: ffff880112655ea0 RDI: 0000000000000001
    RBP: ffff88011aa87e00 R08: ffff88013fff905c R09: ffff88013fff9048
    R10: ffff88013fff9050 R11: 00000001050a7b8c R12: ffff880114778a00
    R13: ffff880114778ab4 R14: ffff880114778b30 R15: 0000000000000000
    FS:  00007f071647c700(0000) GS:ffff88011aa80000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000603001 CR3: 0000000112021000 CR4: 00000000000006e0
    Stack:
     0000000000000000 ffff880114778ab8 ffff880112655ea0 0000000000004f76
     ffff880112655ec8 ffff880112655e80 ffff880112655e88 ffff88011aa98fc0
     00000000b97ccf2b dffffc0000000000 ffff88011aa98fc0 ffff88011aa87ef0
    Call Trace:
     <IRQ>
     [<ffffffff813abce7>] __hrtimer_run_queues+0x347/0xa00
     [<ffffffff82c8bbc0>] ? snd_hrtimer_close+0x130/0x130
     [<ffffffff813ab9a0>] ? retrigger_next_event+0x1b0/0x1b0
     [<ffffffff813ae1a6>] ? hrtimer_interrupt+0x136/0x4b0
     [<ffffffff813ae220>] hrtimer_interrupt+0x1b0/0x4b0
     [<ffffffff8120f91e>] local_apic_timer_interrupt+0x6e/0xf0
     [<ffffffff81227ad3>] ? kvm_guest_apic_eoi_write+0x13/0xc0
     [<ffffffff83c35086>] smp_apic_timer_interrupt+0x76/0xa0
     [<ffffffff83c3416c>] apic_timer_interrupt+0x8c/0xa0
     <EOI>
     [<ffffffff83c3239c>] ? _raw_spin_unlock_irqrestore+0x2c/0x60
     [<ffffffff82c8185d>] snd_timer_start1+0xdd/0x670
     [<ffffffff82c87015>] snd_timer_continue+0x45/0x80
     [<ffffffff82c88100>] snd_timer_user_ioctl+0x1030/0x2830
     [<ffffffff8159f3a0>] ? __follow_pte.isra.49+0x430/0x430
     [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80
     [<ffffffff815a26fa>] ? do_wp_page+0x3aa/0x1c90
     [<ffffffff815aa4f8>] ? handle_mm_fault+0xbc8/0x27f0
     [<ffffffff815a9930>] ? __pmd_alloc+0x370/0x370
     [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80
     [<ffffffff816b0733>] do_vfs_ioctl+0x193/0x1050
     [<ffffffff816b05a0>] ? ioctl_preallocate+0x200/0x200
     [<ffffffff81002f2f>] ? syscall_trace_enter+0x3cf/0xdb0
     [<ffffffff815045ba>] ? __context_tracking_exit.part.4+0x9a/0x1e0
     [<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190
     [<ffffffff82001a97>] ? check_preemption_disabled+0x37/0x1e0
     [<ffffffff81d93889>] ? security_file_ioctl+0x89/0xb0
     [<ffffffff816b167f>] SyS_ioctl+0x8f/0xc0
     [<ffffffff816b15f0>] ? do_vfs_ioctl+0x1050/0x1050
     [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0
     [<ffffffff83c32b2a>] entry_SYSCALL64_slow_path+0x25/0x25
    Code: e8 fc 42 7b fe 8b 0d 06 8a 50 03 49 0f af cf 48 85 c9 0f 88 7c 01 00 00 48 89 4d a8 e8 e0 42 7b fe 48 8b 45 c0 48 8b 4d a8 48 99 <48> f7 f9 49 01 c7 e8 cb 42 7b fe 48 8b 55 d0 48 b8 00 00 00 00
    RIP  [<ffffffff82c8bd9a>] snd_hrtimer_callback+0x1da/0x3f0
     RSP <ffff88011aa87da8>
    ---[ end trace 6aa380f756a21074 ]---

The problem happens when you call ioctl(SNDRV_TIMER_IOCTL_CONTINUE) on a
completely new/unused timer -- it will have ->sticks == 0, which causes a
divide by 0 in snd_hrtimer_callback().
Signed-off-by: default avatarVegard Nossum <vegard.nossum@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      2350481b
    • Simon Baatz's avatar
      ARM: kirkwood: ib62x0: fix size of u-boot environment partition · 8773752e
      Simon Baatz authored 
      [ Upstream commit a7789378 ]

Commit 148c274e ("ARM: kirkwood: ib62x0: add u-boot environment
partition") split the "u-boot" partition into "u-boot" and "u-boot
environment".  However, instead of the size of the environment, an offset
was given, resulting in overlapping partitions.
Signed-off-by: default avatarSimon Baatz <gmbnomis@gmail.com>
Fixes: 148c274e ("ARM: kirkwood: ib62x0: add u-boot environment partition")
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Luka Perkov <luka@openwrt.org>
Cc: stable@vger.kernel.org # 3.13+
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      8773752e
    • Miklos Szeredi's avatar
      fuse: direct-io: don't dirty ITER_BVEC pages · 7933dd87
      Miklos Szeredi authored 
      [ Upstream commit 8fba54ae ]

When reading from a loop device backed by a fuse file it deadlocks on
lock_page().

This is because the page is already locked by the read() operation done on
the loop device.  In this case we don't want to either lock the page or
dirty it.

So do what fs/direct-io.c does: only dirty the page for ITER_IOVEC vectors.
Reported-by: default avatarSheng Yang <sheng@yasker.org>
Fixes: aa4d8616 ("block: loop: switch to VFS ITER_BVEC")
Signed-off-by: default avatarMiklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # v4.1+
Reviewed-by: default avatarSheng Yang <sheng@yasker.org>
Reviewed-by: default avatarAshish Samant <ashish.samant@oracle.com>
Tested-by: default avatarSheng Yang <sheng@yasker.org>
Tested-by: default avatarAshish Samant <ashish.samant@oracle.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      7933dd87
    • Felix Fietkau's avatar
      ath9k: fix using sta->drv_priv before initializing it · bb5c68e0
      Felix Fietkau authored 
      [ Upstream commit 7711aaf0 ]

A station pointer can be passed to the driver on tx, before it has been
marked as associated. Since ath9k_sta_state was initializing the entry
too late, it resulted in some spurious crashes.

Fixes: df3c6eb3 ("ath9k: Use sta_state() callback")
Cc: stable@vger.kernel.org
Signed-off-by: default avatarFelix Fietkau <nbd@nbd.name>
Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      bb5c68e0
    • Pawel Moll's avatar
      bus: arm-ccn: Fix XP watchpoint settings bitmask · c3e7a0e5
      Pawel Moll authored 
      [ Upstream commit b928466b ]

The code setting XP watchpoint comparator and mask registers should, in
order to be fully compliant with specification, zero one or more most
significant bits of each field. In both L cases it means zeroing bit 63.
The bitmask doing this was wrong, though, zeroing bit 60 instead.
Fortunately, due to a lucky coincidence, this turned out to be fairly
innocent with the existing hardware.

Fixed now.

Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: default avatarPawel Moll <pawel.moll@arm.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      c3e7a0e5
    • Pawel Moll's avatar
      bus: arm-ccn: Do not attempt to configure XPs for cycle counter · b9d45ce3
      Pawel Moll authored 
      [ Upstream commit b7c1beb2 ]

Fuzzing the CCN perf driver revealed a small but definitely dangerous
mistake in the event setup code. When a cycle counter is requested, the
driver should not reconfigure the events bus at all, otherwise it will
corrupt (in most but the simplest cases) its configuration and may end
up accessing XP array out of its bounds and corrupting control
registers.
Reported-by: default avatarMark Rutland <mark.rutland@arm.com>
Reviewed-by: default avatarMark Rutland <mark.rutland@arm.com>
Tested-by: default avatarMark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: default avatarPawel Moll <pawel.moll@arm.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      b9d45ce3
    • Tyrel Datwyler's avatar
      scsi: fix upper bounds check of sense key in scsi_sense_key_string() · 0dd4c68f
      Tyrel Datwyler authored 
      [ Upstream commit a87eeb90 ]

Commit 655ee63c ("scsi constants: command, sense key + additional
sense string") added a "Completed" sense string with key 0xF to
snstext[], but failed to updated the upper bounds check of the sense key
in scsi_sense_key_string().

Fixes: 655ee63c ("[SCSI] scsi constants: command, sense key + additional sense strings")
Cc: <stable@vger.kernel.org> # v3.12+
Signed-off-by: default avatarTyrel Datwyler <tyreld@linux.vnet.ibm.com>
Reviewed-by: default avatarBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      0dd4c68f
    • Johannes Berg's avatar
      Revert "wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel" · cfad3a5a
      Johannes Berg authored 
      [ Upstream commit 4d0bd46a ]

This reverts commit 3d5fdff4.

Ben Hutchings pointed out that the commit isn't safe since it assumes
that the structure used by the driver is iw_point, when in fact there's
no way to know about that.

Fortunately, the only driver in the tree that ever runs this code path
is the wilc1000 staging driver, so it doesn't really matter.

Clearly I should have investigated this better before applying, sorry.
Reported-by: default avatarBen Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org [though I guess it doesn't matter much]
Fixes: 3d5fdff4 ("wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel")
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      cfad3a5a
    • Sebastian Reichel's avatar
      ARM: OMAP3: hwmod data: Add sysc information for DSI · bd2d7040
      Sebastian Reichel authored 
      [ Upstream commit b46211d6 ]

Add missing sysconfig/sysstatus information
to OMAP3 hwmod. The information has been
checked against OMAP34xx and OMAP36xx TRM.

Without this change DSI block is not reset
during boot, which is required for working
Nokia N950 display.
Signed-off-by: default avatarSebastian Reichel <sre@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      bd2d7040
  3. 18 Sep, 2016 1 commit
    • James Hogan's avatar
      MIPS: KVM: Check for pfn noslot case · 3b23ff99
      James Hogan authored 
      commit ba913e4f upstream.

When mapping a page into the guest we error check using is_error_pfn(),
however this doesn't detect a value of KVM_PFN_NOSLOT, indicating an
error HVA for the page. This can only happen on MIPS right now due to
unusual memslot management (e.g. being moved / removed / resized), or
with an Enhanced Virtual Memory (EVA) configuration where the default
KVM_HVA_ERR_* and kvm_is_error_hva() definitions are unsuitable (fixed
in a later patch). This case will be treated as a pfn of zero, mapping
the first page of physical memory into the guest.

It would appear the MIPS KVM port wasn't updated prior to being merged
(in v3.10) to take commit 81c52c56 ("KVM: do not treat noslot pfn as
a error pfn") into account (merged v3.8), which converted a bunch of
is_error_pfn() calls to is_error_noslot_pfn(). Switch to using
is_error_noslot_pfn() instead to catch this case properly.

Fixes: 858dd5d4 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
[james.hogan@imgtec.com: Backport to v4.7.y]
Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
Signed-off-by: default avatarSasha Levin <alexander.levin@verizon.com>
      3b23ff99
  5. 17 Sep, 2016 1 commit
  7. 15 Sep, 2016 14 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7